Investigating the effect of printing conditions and annealing on the porosity and tensile behavior of 3D ‐printed polyetherimide material in Z ‐direction

Effects of printing parameters on the tensile behavior of 3D ‐printed acrylonitrile styrene acrylate ( ASA ) material in Z direction

(2022) Anouar El Magri et al.   POLYMER ENGINEERING AND SCIENCE

Rheology, Crystallinity, and Mechanical Investigation of Interlayer Adhesion Strength by Thermal Annealing of Polyetherimide (PEI/ULTEM 1010) Parts Produced by 3D Printing

(2022) Musa Yilmaz et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Optimization of Printing Parameters to Maximize the Mechanical Properties of 3D-Printed PETG-Based Parts

(2022) Sara Valvez et al.   Polymers

Roadmap: Numerical-Experimental Investigation and Optimization of 3D-Printed Parts Using Response Surface Methodology

(2022) Hamid Reza Vanaei et al.   Materials

Effects of Laser Power and Hatch Orientation on Final Properties of PA12 Parts Produced by Selective Laser Sintering

(2022) Anouar El Magri et al.   Polymers

Parametric study on tensile and flexural properties of ULTEM 1010 specimens fabricated via FDM

(2021) Chrysoula Pandelidi et al.   RAPID PROTOTYPING JOURNAL

Preparation and characterization of poly(ether ether ketone)/poly(ether imide) [PEEK/PEI] blends for fused filament fabrication

(2021) Anouar El Magri et al.   JOURNAL OF MATERIALS SCIENCE

An overview on the progress and development of modified sulfonated polyether ether ketone membranes for vanadium redox flow battery applications

(2021) Baye Gueye Thiam et al.   HIGH PERFORMANCE POLYMERS

A Comparative Analysis of Chemical, Thermal, and Mechanical Post-Process of Fused Filament Fabricated Polyetherimide Parts for Surface Quality Enhancement

(2021) Ariadna Chueca de Bruijn et al.   Materials

Effects of Heat-Treatment on Tensile Behavior and Dimension Stability of 3D Printed Carbon Fiber Reinforced Composites

(2021) Amal Nassar et al.   Polymers

Optimization of printing parameters for improvement of mechanical and thermal performances of 3D printed poly(ether ether ketone) parts

(2020) Anouar El Magri et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Experimental investigation and optimization of printing parameters of 3D printed polyphenylene sulfide through response surface methodology

(2020) Anouar El Magri et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Role of infill parameters on the mechanical performance and weight reduction of PEI Ultem processed by FFF

(2020) Albert Forés-Garriga et al.   MATERIALS & DESIGN

Influence of orientation on mechanical properties for high-performance fused filament fabricated ultem 9085 and electro-statically dissipative polyetherketoneketone

(2020) Brian W. Kaplun et al.   Additive Manufacturing

Mechanical properties of fused filament fabricated PEEK for biomedical applications depending on additive manufacturing parameters

(2020) Yiqiao Wang et al.   Journal of the Mechanical Behavior of Biomedical Materials

Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK

(2019) Peng Wang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM

(2019) Shouling Ding et al.   POLYMER TESTING

Enhancing the interlayer tensile strength of 3D printed short carbon fiber reinforced PETG and PLA composites via annealing

(2019) Sunil Bhandari et al.   Additive Manufacturing

Mechanical properties analysis of polyetherimide parts fabricated by fused deposition modeling

(2018) Shenglong Jiang et al.   HIGH PERFORMANCE POLYMERS

Increased fracture toughness of additively manufactured amorphous thermoplastics via thermal annealing

(2018) Kevin R. Hart et al.   POLYMER

Multi-scale and multi-technical analysis of the thermal degradation of poly(ether imide)

(2018) Emilie Courvoisier et al.   POLYMER DEGRADATION AND STABILITY

Investigating Effects of Fused-Deposition Modeling (FDM) Processing Parameters on Flexural Properties of ULTEM 9085 using Designed Experiment

(2018) Aboma Gebisa et al.   Materials

Comparison of Ultem 9085 Used in Fused Deposition Modelling (FDM) with Polytherimide Blends

(2018) Gianluca Cicala et al.   Materials

Mechanical properties of ULTEM 9085 material processed by fused deposition modeling

(2018) Kate Iren Byberg et al.   POLYMER TESTING

Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament

(2018) Peng Geng et al.   Journal of Manufacturing Processes

Can the melt flow index be used to predict the success of fused deposition modelling of commercial poly(lactic acid) filaments into 3D printed materials?

(2017) Sisi Wang et al.   PLASTICS RUBBER AND COMPOSITES

Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM)

(2017) Lu Wang et al.   POLYMER

Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites

(2017) S. Berretta et al.   POLYMER TESTING

An investigation on distortion of PLA thin-plate part in the FDM process

(2015) Liu Xinhua et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Structure and properties of new highly soluble aromatic poly(etherimide)s containing isopropylidene groups

(2013) Aleksandra Wolinska-Grabczyk et al.   POLYMER JOURNAL

Thermal degradation of polyetherimide joined by friction riveting (FricRiveting). Part I: Influence of rotation speed

(2008) S.T. Amancio-Filho et al.   POLYMER DEGRADATION AND STABILITY

Effect of processing conditions on the bonding quality of FDM polymer filaments

(2008) Q. Sun et al.   RAPID PROTOTYPING JOURNAL