Experimental and numerical studies of NiTi dynamic fracture behaviors under the impact loading
出版年份 2022 全文链接
标题
Experimental and numerical studies of NiTi dynamic fracture behaviors under the impact loading
作者
关键词
-
出版物
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
Volume 235, Issue -, Pages 107724
出版商
Elsevier BV
发表日期
2022-09-15
DOI
10.1016/j.ijmecsci.2022.107724
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Development, simulation, and validation of sliding self-centering steel brace with NiTi SMA wires
- (2022) Guohua Sun et al. ENGINEERING STRUCTURES
- Numerical Analysis of NiTi Actuators with Stress Risers: the Role of Bias Load and Actuation Temperature
- (2021) Pejman Shayanfard et al. ENGINEERING FRACTURE MECHANICS
- Measurement of transient temperature at super-high-speed deformation
- (2021) Chong Gao et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Temperature Dependent Dynamic Strain Localization and Failure of Ductile Polymeric Rods under Large Deformation
- (2021) Longhui Zhang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Phase field simulation on the super-elasticity, elastocaloric and shape memory effect of geometrically graded nano-polycrystalline NiTi shape memory alloys
- (2021) Bo Xu et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Fracture resistance of shape memory alloys under thermomechanical loading
- (2021) J. Makkar et al. ENGINEERING FRACTURE MECHANICS
- Integration of an adaptive cohesive zone and continuum ductile fracture model to simulate crack propagation in steel structures
- (2021) Vincente Pericoli et al. ENGINEERING FRACTURE MECHANICS
- Revealing ductile/quasi-cleavage fracture and DRX-affected grain size evolution of AA7075 alloy during hot stamping process
- (2021) Bingtao Tang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Phase field study on the microscopic mechanism of grain size dependent cyclic degradation of super-elasticity and shape memory effect in nano-polycrystalline NiTi alloys
- (2021) Bo Xu et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Grain size dependence of cracking performance in polycrystalline NiTi alloys
- (2021) Guiqiu Xie et al. JOURNAL OF ALLOYS AND COMPOUNDS
- An experimental investigation of the nucleation and the propagation of NiTi martensitic transformation front under impact loading
- (2020) R. Xiao et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Effects of grain size on fatigue crack growth behaviors of nanocrystalline superelastic NiTi shape memory alloys
- (2020) Junyu Chen et al. ACTA MATERIALIA
- Thermodynamic behavior of NiTi shape memory alloy against low-velocity impact: experiment and simulation
- (2020) Jun Wang et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Self-assembled anodization of NiTi alloys for biomedical applications
- (2020) Ruiqiang Hang et al. APPLIED SURFACE SCIENCE
- Experimental and numerical studies on compression-shear behaviors of brittle rocks subjected to combined static-dynamic loading
- (2020) Yuan Xu et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- An investigation into the mechanical behaviour of fibre-reinforced geopolymer concrete incorporating NiTi shape memory alloy, steel and polypropylene fibres
- (2020) Yu Wang et al. CONSTRUCTION AND BUILDING MATERIALS
- Constitutive modelling of transformation pattern in superelastic NiTi shape memory alloy under cyclic loading
- (2020) Yao Xiao et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- An experimental investigation on tensile fracturing of brittle rocks by considering the effect of grain size and mineralogical composition
- (2020) Mahmoud Alneasan et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Effect of interlayer addition on microstructure and mechanical properties of NiTi/stainless steel joint by electron beam welding
- (2020) H. Niu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Fatigue on shape memory alloys: Experimental observations and constitutive modeling
- (2020) Vanderson M. Dornelas et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Triaxial tension-induced damage behavior of nanocrystalline NiTi alloy and its dependence on grain size
- (2020) Fang Wang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- On the validity of strain energy density criterion for mixed mode I/II fracture analysis of notched shape memory alloy components
- (2019) M.M. Mirsayar et al. ENGINEERING FRACTURE MECHANICS
- Numerical studies on explosive welding with ANFO by using a density adaptive SPH method
- (2019) Z.L. Zhang et al. Journal of Manufacturing Processes
- On the cracks normal to shape memory alloy/elastic material interfaces
- (2019) M.M. Mirsayar et al. ENGINEERING FRACTURE MECHANICS
- A smoothed particle element method (SPEM) for modeling fluid–structure interaction problems with large fluid deformations
- (2019) Z.L. Zhang et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Direct FE2 for concurrent multilevel modelling of heterogeneous structures
- (2019) Vincent Beng Chye Tan et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Numerical study for prediction of optimum operational parameters in laser welding of NiTi alloy
- (2019) Mehrshad Mehrpouya et al. OPTICS AND LASER TECHNOLOGY
- A macroscopic description of shape memory alloy functional fatigue
- (2019) Vanderson M. Dornelas et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Cohesive zone modeling for crack propagation in polycrystalline NiTi alloys using molecular dynamics
- (2019) Min Lu et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Shape memory alloy-based mechanism for aeronautical application: Theory, optimization and experiment
- (2018) Pedro B.C. Leal et al. AEROSPACE SCIENCE AND TECHNOLOGY
- Mixed-mode fracture of a superelastic NiTi alloy: Experimental and numerical investigations
- (2018) B. Katanchi et al. ENGINEERING FRACTURE MECHANICS
- Molecular dynamics modeling of crack propagation in titanium alloys by using an experiment-based Monte Carlo model
- (2018) Xiangguo Zeng et al. ENGINEERING FRACTURE MECHANICS
- Three-dimensional constitutive model for structural and functional fatigue of shape memory alloy actuators
- (2018) Yves Chemisky et al. INTERNATIONAL JOURNAL OF FATIGUE
- Mechanical response of near-equiatomic NiTi alloy at dynamic high pressure and strain rate
- (2018) Xuping Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A phenomenological description of shape memory alloy transformation induced plasticity
- (2018) Sergio de A. Oliveira et al. MECCANICA
- A zero-thickness cohesive element-based numerical manifold method for rock mechanical behavior with micro-Voronoi grains
- (2018) Zhijun Wu et al. ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
- Adapted Nakazima test to evaluate dynamic effect on strain distribution and dome height in balanced biaxial stretching condition
- (2018) M. Sasso et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Predicting the damage on a target plate produced by hypervelocity impact using a decoupled finite particle method
- (2018) Z.L. Zhang et al. ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
- Evolution of Internal Damage During Actuation Fatigue in Shape Memory Alloys
- (2018) Francis R. Phillips et al. INTERNATIONAL JOURNAL OF FATIGUE
- Modeling of finite deformation of pseudoelastic NiTi shape memory alloy considering various inelasticity mechanisms
- (2018) Satyabrata Dhala et al. INTERNATIONAL JOURNAL OF PLASTICITY
- An experimental study of NiTi alloy under shear loading over a large range of strain rates
- (2017) H. Huang et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- A thermomechanically coupled finite-strain constitutive model for cyclic pseudoelasticity of polycrystalline shape memory alloys
- (2017) Jun Wang et al. INTERNATIONAL JOURNAL OF PLASTICITY
- The effect of severe grain refinement on the damage tolerance of a superelastic NiTi shape memory alloy
- (2017) Thomas Leitner et al. Journal of the Mechanical Behavior of Biomedical Materials
- Effect of the thermomechanical coupling on fatigue crack propagation in NiTi shape memory alloys
- (2017) Yajun You et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Photostress analysis of stress-induced martensite phase transformation in superelastic NiTi
- (2017) B. Katanchi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- In-situ investigation of dynamic deformation in NiTi shape memory alloys under laser induced shock
- (2017) Xi Wang et al. MECHANICS OF MATERIALS
- Design and analysis of a smart soft composite structure for various modes of actuation
- (2016) Sung-Hyuk Song et al. COMPOSITES PART B-ENGINEERING
- A review of constitutive models and modeling techniques for shape memory alloys
- (2016) Cheikh Cisse et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A three-dimensional description of shape memory alloy thermomechanical behavior including plasticity
- (2016) Sergio A. Oliveira et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Grain size dependence of fracture toughness and crack-growth resistance of superelastic NiTi
- (2016) Aslan Ahadi et al. SCRIPTA MATERIALIA
- Simulation of crack propagation in single phase ceramic tool materials
- (2015) Tingting Zhou et al. COMPUTATIONAL MATERIALS SCIENCE
- Rate-dependent cyclic deformation of super-elastic NiTi shape memory alloy: Thermo-mechanical coupled and physical mechanism-based constitutive model
- (2015) Chao Yu et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Effect of martensite reorientation and reorientation-induced plasticity on multiaxial transformation ratchetting of super-elastic NiTi shape memory alloy: New consideration in constitutive model
- (2015) Chao Yu et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Grain-size dependent mechanical behavior of nanocrystalline metals
- (2015) Eric N. Hahn et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Strain rate effects on the localization of the stress-induced martensitic transformation in pseudoelastic NiTi under uniaxial tension, compression and compression–shear
- (2015) C. Elibol et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Crack-tip shielding by the dilatant transformation of particles/fibers embedded in composite materials
- (2015) Qun Li et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Radial vibration analysis of pseudoelastic shape memory alloy thin cylindrical shells by the differential quadrature method
- (2015) Farinaz Forouzesh et al. THIN-WALLED STRUCTURES
- Effects of the cohesive law on ductile crack propagation simulation by using cohesive zone models
- (2014) Huang Yuan et al. ENGINEERING FRACTURE MECHANICS
- A micromechanical constitutive model based on crystal plasticity for thermo-mechanical cyclic deformation of NiTi shape memory alloys
- (2013) Chao Yu et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Microstructure and mechanical properties of an austenite NiTi shape memory alloy treated with laser induced shock
- (2013) Xi Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of spherical micro-voids in shape memory alloys subjected to uniaxial loading
- (2012) J.S. Olsen et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Crack propagation simulation in microstructure of ceramic tool materials
- (2011) Tingting Zhou et al. COMPUTATIONAL MATERIALS SCIENCE
- Experimental study on rate dependence of macroscopic domain and stress hysteresis in NiTi shape memory alloy strips
- (2010) Xinghua Zhang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Fracture mechanics and microstructure in NiTi shape memory alloys
- (2008) S. Gollerthan et al. ACTA MATERIALIA
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now