Recent progress on microstructure manipulation of aluminium alloys manufactured via laser powder bed fusion
出版年份 2022 全文链接
标题
Recent progress on microstructure manipulation of aluminium alloys manufactured via laser powder bed fusion
作者
关键词
-
出版物
Virtual and Physical Prototyping
Volume 18, Issue 1, Pages -
出版商
Informa UK Limited
发表日期
2022-10-17
DOI
10.1080/17452759.2022.2125880
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Anisotropic yield surfaces of additively manufactured metals simulated with crystal plasticity
- (2022) K. Somlo et al. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
- A study of the influence of novel scan strategies on residual stress and microstructure of L-shaped LPBF IN718 samples
- (2022) Prabhat Pant et al. MATERIALS & DESIGN
- Thermal history and high-speed optical imaging of overhang structures during laser powder bed fusion: A computational and experimental analysis
- (2022) Ava Ashby et al. Additive Manufacturing
- Laser printing path and its influence on molten pool configuration, microstructure and mechanical properties of laser powder bed fusion processed rare earth element modified Al-Mg alloy
- (2022) Han Zhang et al. Virtual and Physical Prototyping
- Recent progress on additive manufacturing of multi-material structures with laser powder bed fusion
- (2022) Di Wang et al. Virtual and Physical Prototyping
- In situ alloying of AlSi10Mg-5 wt% Ni through laser powder bed fusion and subsequent heat treatment
- (2022) Mohammad Reza Jandaghi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Methodology and experimental validation of analytical melt pool models for laser powder bed fusion
- (2022) Viktor Coen et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Laser powder bed fusion of a novel nano-modified tungsten alloy with refined microstructure and enhanced strength
- (2022) Meng Guo et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Correlation between tensile properties, microstructure, and processing routes of an Al–Cu–Mg–Ag–TiB2 (A205) alloy: Additive manufacturing and casting
- (2022) M. Avateffazeli et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment on the microstructure and mechanical properties of Er-containing Al–7Si–0.6 Mg alloy by laser powder bed fusion
- (2022) Bo Zhang et al. Journal of Materials Research and Technology-JMR&T
- Microstructure and mechanical property of high power laser powder bed fusion AlSi10Mg alloy before and after T6 heat treatment
- (2022) Mengna Liu et al. Virtual and Physical Prototyping
- On the efficiency of machine learning for fatigue assessment of post-processed additively manufactured AlSi10Mg
- (2022) E. Maleki et al. INTERNATIONAL JOURNAL OF FATIGUE
- Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion
- (2022) Paul A. Rometsch et al. MATERIALS & DESIGN
- Grain refinement and performance enhancement of laser powder bed fusion in-situ processed Al-Mg alloy modified by ScH3 and ZrH2
- (2022) Xiang Li et al. MATERIALS CHARACTERIZATION
- Developing a novel high-strength Al–Mg–Zn–Si alloy for laser powder bed fusion
- (2022) Feipeng Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Solidification microstructure, aging evolution and creep resistance of laser powder-bed fused Al-7Ce-8Mg (wt%)
- (2022) Jovid U. Rakhmonov et al. Additive Manufacturing
- Investigation and characterization of an Al-Mg-Zr-Sc alloy with reduced Sc content for laser powder bed fusion
- (2022) F. Belelli et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Excellent strength–ductility balance of Sc-Zr-modified Al–Mg alloy by tuning bimodal microstructure via hatch spacing in laser powder bed fusion
- (2022) Yusufu Ekubaru et al. MATERIALS & DESIGN
- Microstructure and mechanical properties of Al-Mg-Mn-Er-Zr alloys fabricated by laser powder bed fusion
- (2022) Yanwu Guo et al. MATERIALS & DESIGN
- Evidence of in-situ Cu clustering as a function of laser power during laser powder bed fusion of 17–4 PH stainless steel
- (2022) M.S. Moyle et al. SCRIPTA MATERIALIA
- Cracks and process control in laser powder bed fusion of Al-Zn-Mg alloy
- (2022) Tingting Wang et al. Journal of Manufacturing Processes
- Registration and fusion of large-scale melt pool temperature and morphology monitoring data demonstrated for surface topography prediction in LPBF
- (2022) Haolin Zhang et al. Additive Manufacturing
- Effect of precipitation-forming elements in a near-eutectic Al-Ce alloy for Laser Powder Bed Fusion
- (2022) Marcel Hesselmann et al. Additive Manufacturing
- Microstructure characterization and mechanical properties of crack-free Al-Cu-Mg-Y alloy fabricated by laser powder bed fusion
- (2022) Ying Chen et al. Additive Manufacturing
- Remarkable strength-impact toughness conflict in high-strength Al-Mg-Sc-Zr alloy fabricated via laser powder bed fusion additive manufacturing
- (2022) Zihong Wang et al. Additive Manufacturing
- Production Strategy for Manufacturing Large-Scale AlSi10Mg Components by Laser Powder Bed Fusion
- (2021) Federico Bosio et al. JOM
- Effect of the scanning strategy on microstructure and mechanical anisotropy of Hastelloy X superalloy produced by Laser Powder Bed Fusion
- (2021) Xuan Zhang et al. MATERIALS CHARACTERIZATION
- Insight into the effect of different thermal treatment routes on the microstructure of AlSi7Mg produced by laser powder bed fusion
- (2021) R. Casati et al. MATERIALS CHARACTERIZATION
- Heat treatment of aluminium alloys produced by laser powder bed fusion: A review
- (2021) J. Fiocchi et al. MATERIALS & DESIGN
- Laser powder bed fusion of titanium aluminides: An investigation on site-specific microstructure evolution mechanism
- (2021) Xing Zhang et al. MATERIALS & DESIGN
- Influence of storage conditions and reconditioning of AlSi10Mg powder on the quality of parts produced by laser powder bed fusion (LPBF)
- (2021) Kirstin Riener et al. Additive Manufacturing
- Composition-dependent solidification cracking of aluminum-silicon alloys during laser powder bed fusion
- (2021) Holden Hyer et al. ACTA MATERIALIA
- Laser powder bed fusion of nano-CaB6 decorated 2024 aluminum alloy
- (2021) Philipp Mair et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Unravelling the multi-scale structure–property relationship of laser powder bed fusion processed and heat-treated AlSi10Mg
- (2021) P. Van Cauwenbergh et al. Scientific Reports
- Microstructural and mechanical evaluation of post-processed SS 316L manufactured by laser-based powder bed fusion
- (2021) H. Sohrabpoor et al. Journal of Materials Research and Technology-JMR&T
- On the relationship between cutting forces and anisotropy features in the milling of LPBF Inconel 718 for near net shape parts
- (2021) José David Pérez et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A novel strategy to additively manufacture 7075 aluminium alloy with selective laser melting
- (2021) Qiyang Tan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure, mechanical performance, and corrosion behavior of additively manufactured aluminum alloy 5083 with 0.7 and 1.0 wt% Zr addition
- (2021) Le Zhou et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of heat treatment on microstructure and mechanical properties of SLMed Sc-modified AlSi10Mg alloy
- (2021) Yuming Chen et al. Progress in Natural Science-Materials International
- Material-structure-performance integrated laser-metal additive manufacturing
- (2021) Dongdong Gu et al. SCIENCE
- In situ formation of D022-Al3Ti during selective laser melting of nano-TiC/AlSi10Mg alloy prepared by electrostatic self-assembly
- (2021) Zhenhua Fan et al. VACUUM
- Part-scale thermal simulation of laser powder bed fusion using graph theory: Effect of thermal history on porosity, microstructure evolution, and recoater crash
- (2021) Reza Yavari et al. MATERIALS & DESIGN
- Texture of inclined up-facing surfaces in laser powder bed fusion of metals
- (2021) Jitka Metelkova et al. Additive Manufacturing
- Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations
- (2021) Jan Platl et al. ACTA MATERIALIA
- Fatigue and dynamic aging behavior of a high strength Al-5024 alloy fabricated by laser powder bed fusion additive manufacturing
- (2021) Peidong He et al. ACTA MATERIALIA
- Machine-learning assisted additive manufacturing of a TiCN reinforced AlSi10Mg composite with tailorable mechanical properties
- (2021) Peidong He et al. MATERIALS LETTERS
- A metal–metal powder formulation approach for laser additive manufacturing of difficult-to-print high-strength aluminum alloys
- (2021) Robyn L. Bradford et al. MATERIALS LETTERS
- Microstructure, mechanical properties, aging behavior, and corrosion resistance of a laser powder bed fusion fabricated Al–Zn–Mg–Cu–Ta alloy
- (2021) Xinwei Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Dependence of mechanical properties and microstructure on solidification onset temperature for Al2024–CaB6 alloys processed using laser powder bed fusion
- (2021) Philipp Mair et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Alloy design strategy for microstructural-tailored scandium-modified aluminium alloys for additive manufacturing
- (2021) D. Schimbäck et al. SCRIPTA MATERIALIA
- Microstructure and Mechanical Properties of AlSi10Mg Alloy Manufactured by Laser Powder Bed Fusion Under Nitrogen and Argon Atmosphere
- (2021) Yunmian Xiao et al. Acta Metallurgica Sinica-English Letters
- An experimental investigation of hybrid manufactured SLM based Al-Si10-Mg alloy under mist cooling conditions
- (2021) Monsuru Ramoni et al. Journal of Manufacturing Processes
- Digitally twinned additive manufacturing: Detecting flaws in laser powder bed fusion by combining thermal simulations with in-situ meltpool sensor data
- (2021) R. Yavari et al. MATERIALS & DESIGN
- Understanding of adopting flat-top laser in laser powder bed fusion processed Inconel 718 alloy: simulation of single-track scanning and experiment
- (2021) Weihao Yuan et al. Journal of Materials Research and Technology-JMR&T
- Columnar-to-equiaxed grain transition in powder bed fusion via mimicking casting solidification and promoting in situ recrystallization
- (2021) Paria Karimi et al. Additive Manufacturing
- Demonstrating the roles of solute and nucleant in grain refinement of additively manufactured aluminium alloys
- (2021) Qiyang Tan et al. Additive Manufacturing
- High-precision laser powder bed fusion processing of pure copper
- (2021) Shuo Qu et al. Additive Manufacturing
- High strength Al–Li alloy development for laser powder bed fusion
- (2021) Yang Qi et al. Additive Manufacturing
- Influence of erbium addition on the defects of selective laser-melted 7075 aluminium alloy
- (2021) Xuhui Zhang et al. Virtual and Physical Prototyping
- Investigation into the effect of energy density on densification, surface roughness and loss of alloying elements of 7075 aluminium alloy processed by laser powder bed fusion
- (2021) Gan Li et al. OPTICS AND LASER TECHNOLOGY
- Influence of sub-cell structure on the mechanical properties of AlSi10Mg manufactured by laser powder bed fusion
- (2020) A. Kempf et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of the addition of silicon to 7075 aluminum alloy on microstructure, mechanical properties, and selective laser melting processability
- (2020) Yuki Otani et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Subsurface Cooling Rates and Microstructural Response during Laser Based Metal Additive Manufacturing
- (2020) Vivek Thampy et al. Scientific Reports
- A novel method to 3D-print fine-grained AlSi10Mg alloy with isotropic properties via inoculation with LaB6 nanoparticles
- (2020) Qiyang Tan et al. Additive Manufacturing
- Towards understanding grain nucleation under Additive Manufacturing solidification conditions
- (2020) Arvind Prasad et al. ACTA MATERIALIA
- Analysis of laser-induced microcracking in tungsten under additive manufacturing conditions: experiment and simulation
- (2020) Bey Vrancken et al. ACTA MATERIALIA
- Computational Assessment of Thermokinetics and Associated Microstructural Evolution in Laser Powder Bed Fusion Manufacturing of Ti6Al4V Alloy
- (2020) Mangesh V. Pantawane et al. Scientific Reports
- Correlation of SWIR imaging with LPBF 304 L stainless steel part properties
- (2020) Cody S. Lough et al. Additive Manufacturing
- Laser powder bed fusion of AlSi10Mg: Influence of energy intensities on spatter and porosity evolution, microstructure and mechanical properties
- (2020) Tao Yang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Laser powder bed fusion of Al–10 wt% Ce alloys: microstructure and tensile property
- (2020) Le Zhou et al. JOURNAL OF MATERIALS SCIENCE
- The global rise of 3D printing during the COVID-19 pandemic
- (2020) Yu Ying Clarrisa Choong et al. Nature Reviews Materials
- Controlling crack formation and porosity in laser powder bed fusion: Alloy design and process optimisation
- (2020) Hossein Eskandari Sabzi et al. Additive Manufacturing
- Inoculation treatment of an additively manufactured 2024 aluminium alloy with titanium nanoparticles
- (2020) Qiyang Tan et al. ACTA MATERIALIA
- Effect of heat treatment on microstructural evolution and hardness homogeneity in laser powder bed fusion of alloy 718
- (2020) Runbo Jiang et al. Additive Manufacturing
- Additively manufactured novel Al-Cu-Sc-Zr alloy: Microstructure and Mechanical properties
- (2020) Priyanka Agrawal et al. Additive Manufacturing
- Machine-learning assisted laser powder bed fusion process optimization for AlSi10Mg: New microstructure description indices and fracture mechanisms
- (2020) Qian Liu et al. ACTA MATERIALIA
- Effect of addition of micron-sized lanthanum oxide particles on morphologies, microstructures and properties of the wire laser additively manufactured Ti–6Al–4V alloy
- (2020) Xiang Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Investigation of Solidification and Precipitation Behavior of Si-Modified 7075 Aluminum Alloy Fabricated by Laser-Based Powder Bed Fusion
- (2020) Guichuan Li et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Nanoscale periodic gradients generated by laser powder bed fusion of an AlSi10Mg alloy
- (2020) Williams Lefebvre et al. MATERIALS & DESIGN
- On the microstructure and solidification behavior of new generation additively manufactured Al-Cu-Mg-Ag-Ti-B alloys
- (2020) M.H. Ghoncheh et al. Additive Manufacturing
- Selective laser melting additive manufacturing of 7xxx series Al-Zn-Mg-Cu alloy: Cracking elimination by co-incorporation of Si and TiB2
- (2020) S.Y. Zhou et al. Additive Manufacturing
- A three-phase model for simulation of heat transfer and melt pool behaviour in laser powder bed fusion process
- (2020) E.L. Li et al. POWDER TECHNOLOGY
- Microstructure evolution during AlSi10Mg molten alloy/BN microflake interactions in metal matrix composites obtained through 3D printing
- (2020) Anton S. Konopatsky et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
- (2019) Ross Cunningham et al. SCIENCE
- Energy Coupling Mechanisms and Scaling Behavior Associated with Laser Powder Bed Fusion Additive Manufacturing
- (2019) Jianchao Ye et al. ADVANCED ENGINEERING MATERIALS
- Effect of nano-TiB2 particles on the anisotropy in an AlSi10Mg alloy processed by selective laser melting
- (2019) Y.K. Xiao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effects of laser processing parameters on microstructure and mechanical properties of additively manufactured AlSi10Mg alloys reinforced by TiC
- (2019) Chonggui Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- AlSi10Mg alloy nanocomposites reinforced with aluminum-coated graphene: Selective laser melting, interfacial microstructure and property analysis
- (2019) Zhanyong Zhao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of re-melting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting
- (2019) Wenhui Yu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: A state of the art review
- (2019) W.H. Yu et al. PROGRESS IN MATERIALS SCIENCE
- Pore elimination mechanisms during 3D printing of metals
- (2019) S. Mohammad H. Hojjatzadeh et al. Nature Communications
- Microstructure and mechanical properties of Zr-modified aluminum alloy 5083 manufactured by laser powder bed fusion
- (2019) Le Zhou et al. Additive Manufacturing
- Process development and impact of intrinsic heat treatment on the mechanical performance of selective laser melted AISI 4140
- (2019) James Damon et al. Additive Manufacturing
- Understanding of strengthening and toughening mechanisms for Sc-modified Al-Si-(Mg) series casting alloys designed by computational thermodynamics
- (2019) Zhao Lu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Modelling of laser powder bed fusion process and analysing the effective parameters on surface characteristics of Ti-6Al-4V
- (2019) Amir Mahyar Khorasani et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Effect of bimodal microstructure on the tensile properties of selective laser melt Al-Mg-Sc-Zr alloy
- (2019) Rulong Ma et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure evolution and mechanical property response via 3D printing parameter development of Al–Sc alloy
- (2019) C. N. Kuo et al. Virtual and Physical Prototyping
- Alloying AlSi10Mg and Cu powders in laser Single Scan Tracks, melt spinning, and Laser Powder Bed Fusion
- (2019) Silvia Marola et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of energy density on laser powder bed fusion built single tracks and thin wall structures with 100 µm preplaced powder layer thickness
- (2019) S.K. Nayak et al. OPTICS AND LASER TECHNOLOGY
- Numerical investigation of effects of nucleation mechanisms on grain structure in metal additive manufacturing
- (2018) Xuxiao Li et al. COMPUTATIONAL MATERIALS SCIENCE
- Columnar to equiaxed transition in Al-Mg(-Sc)-Zr alloys produced by selective laser melting
- (2018) Kun V. Yang et al. SCRIPTA MATERIALIA
- In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing
- (2018) Chu Lun Alex Leung et al. Nature Communications
- Characterization of 17-4PH Single Tracks Produced at Different Parametric Conditions towards Increased Productivity of LPBF Systems—The Effect of Laser Power and Spot Size Upscaling
- (2018) Nkutwane Makoana et al. Metals
- Influence of SLM scan-speed on microstructure, precipitation of Al 3 Sc particles and mechanical properties in Sc- and Zr-modified Al-Mg alloys
- (2018) A.B. Spierings et al. MATERIALS & DESIGN
- Laser additive manufacturing of Zn porous scaffolds: shielding gas flow, surface quality and densification
- (2018) Peng Wen et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Solidification pattern, microstructure and texture development in Laser Powder Bed Fusion (LPBF) of Al10SiMg alloy
- (2018) Hong Qin et al. MATERIALS CHARACTERIZATION
- Preparation and mechanical properties of CNTs-AlSi10Mg composite fabricated via selective laser melting
- (2018) L.Y. Jiang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Layer-by-layer combination of laser powder bed fusion (LPBF) and femtosecond laser surface machining of fabricated stainless steel components
- (2018) Abhi Ghosh et al. Journal of Manufacturing Processes
- Effect of silicon content on densification, mechanical and thermal properties of Al-xSi binary alloys fabricated using selective laser melting
- (2017) Takahiro Kimura et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- 3D printing of high-strength aluminium alloys
- (2017) John H. Martin et al. NATURE
- A Review on Grain Refinement of Aluminum Alloys: Progresses, Challenges and Prospects
- (2017) Ren-Guo Guan et al. Acta Metallurgica Sinica-English Letters
- Effects of Process Conditions on the Mechanical Behavior of Aluminium Wrought Alloy EN AW-2219 (AlCu6Mn) Additively Manufactured by Laser Beam Melting in Powder Bed
- (2017) Michael Karg et al. Micromachines
- Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting
- (2017) A.B. Spierings et al. MATERIALS & DESIGN
- Microstructural Control of Additively Manufactured Metallic Materials
- (2016) P.C. Collins et al. Annual Review of Materials Research
- A criterion for cracking during solidification
- (2015) Sindo Kou ACTA MATERIALIA
- Review of selective laser melting: Materials and applications
- (2015) C. Y. Yap et al. Applied Physics Reviews
- Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
- (2012) Lore Thijs et al. ACTA MATERIALIA
- Texture control during laser deposition of nickel-based superalloy
- (2012) G.P. Dinda et al. SCRIPTA MATERIALIA
- A quantitative study of solute diffusion field effects on heterogeneous nucleation and the grain size of alloys
- (2011) Da Shu et al. ACTA MATERIALIA
- Potency of high-intensity ultrasonic treatment for grain refinement of magnesium alloys
- (2008) A. Ramirez et al. SCRIPTA MATERIALIA
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started