标题
Solid Dispersion Formulations by FDM 3D Printing—A Review
作者
关键词
-
出版物
Pharmaceutics
Volume 14, Issue 4, Pages 690
出版商
MDPI AG
发表日期
2022-03-23
DOI
10.3390/pharmaceutics14040690
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- 3D printing: potential clinical applications for personalised solid dose medications
- (2022) Liam Krueger et al. MEDICAL JOURNAL OF AUSTRALIA
- 3D Printing of Pediatric Medication: The End of Bad Tasting Oral Liquids?—A Scoping Review
- (2022) Iris Lafeber et al. Pharmaceutics
- 3D Printing as a Promising Tool in Personalized Medicine
- (2021) Vanessa Marcia Vaz et al. AAPS PHARMSCITECH
- Improved Dissolution Rate and Intestinal Absorption of Fexofenadine Hydrochloride by the Preparation of Solid Dispersions: In Vitro and In Situ Evaluation
- (2021) Basanth Babu Eedara et al. Pharmaceutics
- Extemporaneous printing of diclofenac orodispersible films for pediatrics
- (2021) Garba M. Khalid et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- A Comparative Review of Natural and Synthetic Biopolymer Composite Scaffolds
- (2021) M. Sai Bhargava Reddy et al. Polymers
- Practicality of 3D Printed Personalized Medicines in Therapeutics
- (2021) Hilda Amekyeh et al. Frontiers in Pharmacology
- Shape memory materials and 4D printing in pharmaceutics
- (2021) Alice Melocchi et al. ADVANCED DRUG DELIVERY REVIEWS
- 3D/4D Printing of Polymers: Fused Deposition Modelling (FDM), Selective Laser Sintering (SLS), and Stereolithography (SLA)
- (2021) Abishek Kafle et al. Polymers
- Process Analytical Technology Tools for Monitoring Pharmaceutical Unit Operations: A Control Strategy for Continuous Process Verification
- (2021) Eun Ji Kim et al. Pharmaceutics
- The Chronotopic™ System for Pulsatile and Colonic Delivery of Active Molecules in the Era of Precision Medicine: Feasibility by 3D Printing via Fused Deposition Modeling (FDM)
- (2021) Alice Melocchi et al. Pharmaceutics
- The underestimated contribution of the solvent to the phase behavior of highly drug loaded amorphous solid dispersions
- (2021) Sien Dedroog et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Tailoring amlodipine release from 3D printed tablets: Influence of infill patterns and wall thickness
- (2021) Samiha Obeid et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Critical points for predicting 3D printable filaments behaviour
- (2021) Vicente Linares et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- Printing of cutaneous patches loaded with propranolol for the treatment of infantile haemangiomas
- (2021) Umberto M. Musazzi et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- Quality of FDM 3D Printed Medicines for Pediatrics: Considerations for Formulation Development, Filament Extrusion, Printing Process and Printer Design
- (2021) Julian Quodbach et al. Therapeutic Innovation & Regulatory Science
- A 3D-Printed Polymer–Lipid-Hybrid Tablet towards the Development of Bespoke SMEDDS Formulations
- (2021) Bryce W. Barber et al. Pharmaceutics
- Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets
- (2021) Sergio A. Sánchez-Guirales et al. Pharmaceutics
- 3D-Printed Coating of Extended-Release Matrix Tablets: Effective Tool for Prevention of Alcohol-Induced Dose Dumping Effect
- (2021) Barbora Skalická et al. Pharmaceutics
- Enhanced Supersaturation via Fusion-Assisted Amorphization during FDM 3D Printing of Crystalline Poorly Soluble Drug Loaded Filaments
- (2021) Guluzar Gorkem Buyukgoz et al. Pharmaceutics
- Searching for Rheological Conditions for FFF 3D Printing with PVC Based Flexible Compounds
- (2020) I. Calafel et al. Materials
- Controlled-Release from High-Loaded Reservoir-Type Systems—A Case Study of Ethylene-Vinyl Acetate and Progesterone
- (2020) Ioannis Koutsamanis et al. Pharmaceutics
- Additive Manufacturing Technologies for Drug Delivery Applications
- (2020) Abdullah Mohammed et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Microbial Degradation and Valorization of Plastic Wastes
- (2020) Jiakang Ru et al. Frontiers in Microbiology
- Recent Progress on Polymer Materials for Additive Manufacturing
- (2020) Lisa Jiaying Tan et al. ADVANCED FUNCTIONAL MATERIALS
- Inkjet printing of a thermolabile model drug onto FDM-printed substrates: formulation and evaluation
- (2020) Georgios K. Eleftheriadis et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- A Graphical Review on the Escalation of Fused Deposition Modeling (FDM) 3D Printing in the Pharmaceutical Field
- (2020) Alice Melocchi et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Oral Fixed-Dose Combination Pharmaceutical Products: Industrial Manufacturing Versus Personalized 3D Printing
- (2020) Raquel Fernández-García et al. PHARMACEUTICAL RESEARCH
- Impact of HPMCAS on the Dissolution Performance of Polyvinyl Alcohol Celecoxib Amorphous Solid Dispersions
- (2020) Marius Monschke et al. Pharmaceutics
- Production of Drug Delivery Systems Using Fused Filament Fabrication: A Systematic Review
- (2020) Bahaa Shaqour et al. Pharmaceutics
- Implementing FDM 3D Printing Strategies Using Natural Fibers to Produce Biomass Composite
- (2020) Waleed Ahmed et al. Materials
- I Spy with My Little Eye: A Paediatric Visual Preferences Survey of 3D Printed Tablets
- (2020) Patricija Januskaite et al. Pharmaceutics
- Novel Solid Dispersions of Naphthoquinone Using Different Polymers for Improvement of Antichagasic Activity
- (2020) Verônica da Silva Oliveira et al. Pharmaceutics
- Fused Deposition Modeling (FDM), the new asset for the production of tailored medicines
- (2020) Sylvain Cailleaux et al. JOURNAL OF CONTROLLED RELEASE
- Structural changes during 3D printing of bioderived and synthetic thermoplastic materials
- (2019) Mihai Alin Pop et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Characterization of amorphous solid dispersions: An update
- (2019) Xiangyu Ma et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- 3D Printed Pellets (Miniprintlets): A Novel, Multi-Drug, Controlled Release Platform Technology
- (2019) Atheer Awad et al. Pharmaceutics
- Overview of the Manufacturing Methods of Solid Dispersion Technology for Improving the Solubility of Poorly Water-Soluble Drugs and Application to Anticancer Drugs
- (2019) Phuong Tran et al. Pharmaceutics
- The Digital Pharmacies Era: How 3D Printing Technology Using Fused Deposition Modeling Can Become a Reality
- (2019) Maisa Araújo et al. Pharmaceutics
- The Self-Assembly Phenomenon of Poloxamers and Its Effect on the Dissolution of a Poorly Soluble Drug from Solid Dispersions Obtained by Solvent Methods
- (2019) Joanna Szafraniec et al. Pharmaceutics
- 3D Printing of Metformin HCl PVA Tablets by Fused Deposition Modeling: Drug Loading, Tablet Design, and Dissolution Studies
- (2019) Mariam Ibrahim et al. AAPS PHARMSCITECH
- An update on the contribution of hot-melt extrusion technology to novel drug delivery in the twenty-first century: part I
- (2019) Venkata Raman Kallakunta et al. Expert Opinion on Drug Delivery
- FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties
- (2019) Valentina Mazzanti et al. Polymers
- Automated therapy preparation of isoleucine formulations using 3D printing for the treatment of MSUD: First single-centre, prospective, crossover study in patients
- (2019) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Development and evaluation of pharmaceutical 3D printability for hot melt extruded cellulose-based filaments
- (2019) Jiaxiang Zhang et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM
- (2019) Shouling Ding et al. POLYMER TESTING
- Mechanical Recyclability of Polypropylene Composites Produced by Material Extrusion-Based Additive Manufacturing
- (2019) Martin Spoerk et al. Polymers
- Carbamazepine Gel Formulation as a Sustained Release Epilepsy Medication for Pediatric Use
- (2019) Mawazi et al. Pharmaceutics
- Impact of Processing Parameters on the Quality of Pharmaceutical Solid Dosage Forms Produced by Fused Deposition Modeling (FDM)
- (2019) Muqdad Alhijjaj et al. Pharmaceutics
- 3D printing of multilayered orodispersible films with in-process drying
- (2019) Jan Elbl et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Solid dispersions of telaprevir with improved solubility prepared by co-milling: formulation, physicochemical characterization, and cytotoxicity evaluation
- (2019) Xinnuo Xiong et al. Materials Science & Engineering C-Materials for Biological Applications
- 3D-Printed Solid Dispersion Drug Products
- (2019) Suet Li Chew et al. Pharmaceutics
- Orodispersible dosage forms: biopharmaceutical improvements and regulatory requirements
- (2018) Francesco Cilurzo et al. DRUG DISCOVERY TODAY
- Reshaping drug development using 3D printing
- (2018) Atheer Awad et al. DRUG DISCOVERY TODAY
- A 3D printed bilayer oral solid dosage form combining metformin for prolonged and glimepiride for immediate drug delivery
- (2018) Christos I. Gioumouxouzis et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Formulation of 3D Printed Tablet for Rapid Drug Release by Fused Deposition Modeling: Screening Polymers for Drug Release, Drug-Polymer Miscibility and Printability
- (2018) Nayan G. Solanki et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Polypropylene Filled With Glass Spheres in Extrusion-Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature
- (2018) Martin Spoerk et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Formulation development and process analysis of drug-loaded filaments manufactured via hot-melt extrusion for 3D-printing of medicines
- (2018) Carolin Korte et al. PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY
- Development of a Simple Mechanical Screening Method for Predicting the Feedability of a Pharmaceutical FDM 3D Printing Filament
- (2018) Jehad M. Nasereddin et al. PHARMACEUTICAL RESEARCH
- Hot Melt Extrusion: Highlighting Physicochemical Factors to Be Investigated While Designing and Optimizing a Hot Melt Extrusion Process
- (2018) Roberta Censi et al. Pharmaceutics
- Personalized orodispersible films by hot melt ram extrusion 3D printing
- (2018) Umberto M. Musazzi et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Printing T3 and T4 oral drug combinations as a novel strategy for hypothyroidism
- (2018) Mustafa Alomari et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Mechanism of Enhanced Nifedipine Dissolution by Polymer-Blended Solid Dispersion through Molecular-Level Characterization
- (2018) Keisuke Ueda et al. MOLECULAR PHARMACEUTICS
- A critical review on 3D-printed dosage forms
- (2018) Ilias El Aita et al. CURRENT PHARMACEUTICAL DESIGN
- Effect of plasticizers on manufacturing ritonavir/copovidone solid dispersions via hot-melt extrusion: Preformulation, physicochemical characterization, and pharmacokinetics in rats
- (2018) Yanna Zhao et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- The importance of rheological behavior in the additive manufacturing technique material extrusion
- (2018) Michael E. Mackay JOURNAL OF RHEOLOGY
- Cellulose based polymers in development of amorphous solid dispersions
- (2018) Rahul B Chavan et al. Asian Journal of Pharmaceutical Sciences
- How changes in molecular weight and PDI of a polymer in amorphous solid dispersions impact dissolution performance
- (2018) Carolin Auch et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Assessment of different polymers and drug loads for fused deposition modeling of drug loaded implants
- (2017) Wiebke Kempin et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Selective laser sintering (SLS) 3D printing of medicines
- (2017) Fabrizio Fina et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Coupling 3D printing with hot-melt extrusion to produce controlled-release tablets
- (2017) Jiaxiang Zhang et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed orodispersible films with Aripiprazole
- (2017) Witold Jamróz et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Effect of Temperature and Moisture on the Physical Stability of Binary and Ternary Amorphous Solid Dispersions of Celecoxib
- (2017) Tian Xie et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Tailored Approaches in Drug Development and Diagnostics: From Molecular Design to Biological Model Systems
- (2017) Cecilia Sahlgren et al. Advanced Healthcare Materials
- Investigation of Polymer-Surfactant and Polymer-Drug-Surfactant Miscibility for Solid Dispersion
- (2016) Suhas G. Gumaste et al. AAPS Journal
- Age-appropriate and acceptable paediatric dosage forms: Insights into end-user perceptions, preferences and practices from the Children’s Acceptability of Oral Formulations (CALF) Study
- (2016) Sejal R. Ranmal et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Hydrophilic-hydrophobic polymer blend for modulation of crystalline changes and molecular interactions in solid dispersion
- (2016) Hai Van Ngo et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Adaptation of pharmaceutical excipients to FDM 3D printing for the fabrication of patient-tailored immediate release tablets
- (2016) Muzna Sadia et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
- (2016) Mohamed A. Alhnan et al. PHARMACEUTICAL RESEARCH
- Lipid-based dispersions of exemestane for improved dissolution rate and intestinal permeability: in vitro and ex vivo characterization
- (2016) Basanth Babu Eedara et al. Artificial Cells Nanomedicine and Biotechnology
- 3D printing of shape memory polymer for functional part fabrication
- (2015) Yang Yang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Drug–Polymer–Water Interaction and Its Implication for the Dissolution Performance of Amorphous Solid Dispersions
- (2015) Yuejie Chen et al. MOLECULAR PHARMACEUTICS
- Dissolution Performance of High Drug Loading Celecoxib Amorphous Solid Dispersions Formulated with Polymer Combinations
- (2015) Tian Xie et al. PHARMACEUTICAL RESEARCH
- A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness
- (2015) Brian N. Turner et al. RAPID PROTOTYPING JOURNAL
- Insoluble drug delivery strategies: review of recent advances and business prospects
- (2015) Sandeep Kalepu et al. Acta Pharmaceutica Sinica B
- Solid dispersion of efavirenz in PVP K-30 by conventional solvent and kneading methods
- (2014) Lariza Darlene Santos Alves et al. CARBOHYDRATE POLYMERS
- Fused-filament 3D printing (3DP) for fabrication of tablets
- (2014) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- The effect of HPMCAS functional groups on drug crystallization from the supersaturated state and dissolution improvement
- (2014) Keisuke Ueda et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- The Biopharmaceutics Risk Assessment Roadmap for Optimizing Clinical Drug Product Performance
- (2014) Arzu Selen et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Low-Viscosity Hydroxypropylcellulose (HPC) Grades SL and SSL: Versatile Pharmaceutical Polymers for Dissolution Enhancement, Controlled Release, and Pharmaceutical Processing
- (2012) Ashish Sarode et al. AAPS PHARMSCITECH
- Understanding Polymer Properties Important for Crystal Growth Inhibition—Impact of Chemically Diverse Polymers on Solution Crystal Growth of Ritonavir
- (2012) Grace A. Ilevbare et al. CRYSTAL GROWTH & DESIGN
- Physicochemical characterization and dissolution enhancement of loratadine by solid dispersion technique
- (2012) Suresh Bandari et al. KOREAN JOURNAL OF CHEMICAL ENGINEERING
- Raman spectroscopy for the in-line polymer–drug quantification and solid state characterization during a pharmaceutical hot-melt extrusion process
- (2010) L. Saerens et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Improved dissolution and pharmacokinetic behavior of cyclosporine A using high-energy amorphous solid dispersion approach
- (2010) Satomi Onoue et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Comparison Between Hot-Melt Extrusion and Spray-Drying for Manufacturing Solid Dispersions of the Graft Copolymer of Ethylene Glycol and Vinylalcohol
- (2010) Sandra Guns et al. PHARMACEUTICAL RESEARCH
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now