Experimental characterization and crystal plasticity modeling of dual-phase steels subjected to strain path reversals
出版年份 2022 全文链接
标题
Experimental characterization and crystal plasticity modeling of dual-phase steels subjected to strain path reversals
作者
关键词
Microstructures, Cyclic loading, Backstress fields, Crystal plasticity, Dual-phase steels
出版物
MECHANICS OF MATERIALS
Volume 168, Issue -, Pages 104293
出版商
Elsevier BV
发表日期
2022-03-19
DOI
10.1016/j.mechmat.2022.104293
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Identification of crystal plasticity model parameters by multi-objective optimization integrating microstructural evolution and mechanical data
- (2021) Daniel J. Savage et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- A crystal plasticity finite element model embedding strain-rate sensitivities inherent to deformation mechanisms: Application to alloy AZ31
- (2021) William G. Feather et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Micromechanical origins of remarkable elongation-to-fracture in AHSS TRIP steels via continuous bending under tension
- (2021) Rishabh Sharma et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Plasticity and structure evolution of ferrite and martensite in DP 1180 during tension and cyclic bending under tension to large strains
- (2021) Krishna Yaddanapudi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Modeling of the thermo-mechanical response and texture evolution of WE43 Mg alloy in the dynamic recrystallization regime using a viscoplastic self-consistent formulation
- (2020) Miroslav Zecevic et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Predicting deformation behavior of α-uranium during tension, compression, load reversal, rolling, and sheet forming using elasto-plastic, multi-level crystal plasticity coupled with finite elements
- (2020) Timothy J. Barrett et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Experimental studies into the role of cyclic bending during stretching of dual-phase steel sheets
- (2020) Camille M. Poulin et al. International Journal of Material Forming
- Modeling material behavior during continuous bending under tension for inferring the post-necking strain hardening response of ductile sheet metals: Application to DP 780 steel
- (2020) Timothy J. Barrett et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Investigations on ductility improvement and reloading yielding during stress relaxation of dual phase Ti–6Al–4V titanium alloy
- (2020) Kali Prasad et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A comparative study between elasto-plastic self-consistent crystal plasticity and anisotropic yield function with distortional hardening formulations for sheet metal forming
- (2020) Zhangxi Feng et al. MECHANICS OF MATERIALS
- An automated procedure built on MTEX for reconstructing deformation twin hierarchies from electron backscattered diffraction datasets of heavily twinned microstructures
- (2020) Daniel J. Savage et al. MATERIALS CHARACTERIZATION
- A full-field crystal plasticity model including the effects of precipitates: Application to monotonic, load reversal, and low-cycle fatigue behavior of Inconel 718
- (2020) Adnan Eghtesad et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A crystallographic extension to the Olson-Cohen model for predicting strain path dependence of martensitic transformation
- (2019) Milovan Zecevic et al. ACTA MATERIALIA
- Deep drawing simulations using the finite element method embedding a multi-level crystal plasticity constitutive law: Experimental verification and sensitivity analysis
- (2019) Timothy J. Barrett et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Mechanical response, twinning, and texture evolution of WE43 magnesium-rare earth alloy as a function of strain rate: Experiments and multi-level crystal plasticity modeling
- (2019) William G. Feather et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Experimental characterization and crystal plasticity modeling of anisotropy, tension-compression asymmetry, and texture evolution of additively manufactured Inconel 718 at room and elevated temperatures
- (2019) Saeede Ghorbanpour et al. INTERNATIONAL JOURNAL OF PLASTICITY
- An implicit formulation of the elasto-plastic self-consistent polycrystal plasticity model and its implementation in implicit finite elements
- (2019) Milovan Zecevic et al. MECHANICS OF MATERIALS
- High-performance full-field crystal plasticity with dislocation-based hardening and slip system back-stress laws: Application to modeling deformation of dual-phase steels
- (2019) Adnan Eghtesad et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Fabrication of a low alloy ultra-high strength (>1500 MPa yield) steel using powder bed fusion additive manufacturing
- (2019) Andelle D. Kudzal et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Compact reconstruction of orientation distributions using generalized spherical harmonics to advance large-scale crystal plasticity modeling: Verification using cubic, hexagonal, and orthorhombic polycrystals
- (2018) Adnan Eghtesad et al. ACTA MATERIALIA
- An automated procedure for geometry creation and finite element mesh generation: Application to explicit grain structure models and machining distortion
- (2018) Timothy J. Barrett et al. COMPUTATIONAL MATERIALS SCIENCE
- Latent hardening within the elasto-plastic self-consistent polycrystal homogenization to enable the prediction of anisotropy of AA6022-T4 sheets
- (2018) Milovan Zecevic et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Modeling of intragranular misorientation and grain fragmentation in polycrystalline materials using the viscoplastic self-consistent formulation
- (2018) Miroslav Zecevic et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Effect of microstructure evolution during plastic deformation on the formability of Transformation Induced Plasticity and Quenched & Partitioned AHSS
- (2018) Marrapu Bhargava et al. MATERIALS & DESIGN
- Explicit modeling of double twinning in AZ31 using crystal plasticity finite elements for predicting the mechanical fields for twin variant selection and fracture analyses
- (2018) Milan Ardeljan et al. ACTA MATERIALIA
- A new visco-plastic self-consistent formulation implicit in dislocation-based hardening within implicit finite elements: Application to high strain rate and impact deformation of tantalum
- (2018) Miroslav Zecevic et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Validation of recent analytical dilatational models for porous polycrystals using crystal plasticity finite element models with Schmid and non-Schmid activation laws
- (2018) Daniel J. Savage et al. MECHANICS OF MATERIALS
- OpenMP and MPI implementations of an elasto-viscoplastic fast Fourier transform-based micromechanical solver for fast crystal plasticity modeling
- (2018) Adnan Eghtesad et al. ADVANCES IN ENGINEERING SOFTWARE
- Predicting elastic anisotropy of dual-phase steels based on crystal mechanics and microstructure
- (2018) Aaron M. Cantara et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Modelling recrystallization textures driven by intragranular fluctuations implemented in the viscoplastic self-consistent formulation
- (2018) Miroslav Zecevic et al. ACTA MATERIALIA
- Experimental study of continuous-bending-under-tension of AA6022-T4
- (2018) Timothy J. Roemer et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718
- (2017) Saeede Ghorbanpour et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Coupling elasto-plastic self-consistent crystal plasticity and implicit finite elements: Applications to compression, cyclic tension-compression, and bending to large strains
- (2017) Milovan Zecevic et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Modeling of Sheet Metal Forming Based on Implicit Embedding of the Elasto-Plastic Self-Consistent Formulation in Shell Elements: Application to Cup Drawing of AA6022-T4
- (2017) Milovan Zecevic et al. JOM
- Crystal Plasticity Modeling of Microstructure Evolution and Mechanical Fields During Processing of Metals Using Spectral Databases
- (2017) Marko Knezevic et al. JOM
- Micromechanisms of deformation in dual phase steels at high strain rates
- (2017) Anindya Das et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of Pressure and Number of Turns on Microstructural Homogeneity Developed in High-Pressure Double Torsion
- (2017) Mohammad Jahedi et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure metrics for quantitative assessment of particle size and dispersion: Application to metal-matrix composites
- (2017) Mohammad Jahedi et al. POWDER TECHNOLOGY
- Average intragranular misorientation trends in polycrystalline materials predicted by a viscoplastic self-consistent approach
- (2016) Ricardo A. Lebensohn et al. ACTA MATERIALIA
- The plasticity of highly oriented nano-layered Zr/Nb composites
- (2016) Milan Ardeljan et al. ACTA MATERIALIA
- A numerical procedure enabling accurate descriptions of strain rate-sensitive flow of polycrystals within crystal visco-plasticity theory
- (2016) Marko Knezevic et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Strain rate and temperature sensitive multi-level crystal plasticity model for large plastic deformation behavior: Application to AZ31 magnesium alloy
- (2016) Milan Ardeljan et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Dual-phase steel sheets under cyclic tension–compression to large strains: Experiments and crystal plasticity modeling
- (2016) Milovan Zecevic et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Origin of texture development in orthorhombic uranium
- (2016) Miroslav Zecevic et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Elevated Temperature Effects on the Plastic Anisotropy of an Extruded Mg-4 Wt Pct Li Alloy: Experiments and Polycrystal Modeling
- (2016) Marcel Risse et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Prediction of forming limit in DP590 steel sheet forming: An extended fracture criterion
- (2016) Bolin Ma et al. MATERIALS & DESIGN
- Modelling and sensitivity analysis of twist springback in deep drawing of dual-phase steel
- (2016) Xin Xue et al. MATERIALS & DESIGN
- Experimental investigation of the mechanical response of laser-welded dissimilar blanks from advanced- and ultra-high-strength steels
- (2016) Hongying Gong et al. MATERIALS & DESIGN
- In situ X-ray diffraction and crystal plasticity modeling of the deformation behavior of extruded Mg–Li–(Al) alloys: An uncommon tension–compression asymmetry
- (2015) Martin Lentz et al. ACTA MATERIALIA
- Computer implementations of iterative and non-iterative crystal plasticity solvers on high performance graphics hardware
- (2015) Daniel J. Savage et al. COMPUTATIONAL MECHANICS
- Explicit incorporation of deformation twins into crystal plasticity finite element models
- (2015) Milan Ardeljan et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Spectral database solutions to elasto-viscoplasticity within finite elements: Application to a cobalt-based FCC superalloy
- (2015) Miroslav Zecevic et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A dislocation density based elasto-plastic self-consistent model for the prediction of cyclic deformation: Application to AA6022-T4
- (2015) Milovan Zecevic et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Mechanical behavior of Mg subjected to strain path changes: Experiments and modeling
- (2015) W. Wen et al. INTERNATIONAL JOURNAL OF PLASTICITY
- High-Pressure Double Torsion as a Severe Plastic Deformation Process: Experimental Procedure and Finite Element Modeling
- (2015) Mohammad Jahedi et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Microstructure evolution and mechanical behavior of a high strength dual-phase steel under monotonic loading
- (2015) E.V. Nesterova et al. MATERIALS CHARACTERIZATION
- Enhanced microstructural homogeneity in metal-matrix composites developed under high-pressure-double-torsion
- (2015) Mohammad Jahedi et al. MATERIALS CHARACTERIZATION
- Effect of age hardening on the deformation behavior of an Mg–Y–Nd alloy: In-situ X-ray diffraction and crystal plasticity modeling
- (2015) Martin Lentz et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Procedures for reducing large datasets of crystal orientations using generalized spherical harmonics
- (2015) Marko Knezevic et al. MECHANICS OF MATERIALS
- Stress relaxation and flow behavior of ultrafine grained AA 1050
- (2015) Mohammad Sadegh Mohebbi et al. MECHANICS OF MATERIALS
- A new implementation of the spectral crystal plasticity framework in implicit finite elements
- (2015) Miroslav Zecevic et al. MECHANICS OF MATERIALS
- EBSD study of micromechanisms involved in high deformation ability of DP steels
- (2015) N. Saeidi et al. MATERIALS & DESIGN
- Springback simulation of advanced high strength steels considering nonlinear elastic unloading–reloading behavior
- (2015) A. Ghaei et al. MATERIALS & DESIGN
- Microstructure Control during Fabrication of Ultrafine Grained Dual-phase Steel: Characterization and Effect of Intercritical Annealing Parameters
- (2015) Marion Calcagnotto et al. ISIJ INTERNATIONAL
- Three dimensional predictions of grain scale plasticity and grain boundaries using crystal plasticity finite element models
- (2014) Marko Knezevic et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations
- (2014) C.C. Tasan et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Texture evolution in two-phase Zr/Nb lamellar composites during accumulative roll bonding
- (2014) Marko Knezevic et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Effective method for fitting complex constitutive equations
- (2014) A. Smith et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A texture-based representative volume element crystal plasticity model for predicting Bauschinger effect during cyclic loading
- (2014) Ling Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Texture evolution and enhanced grain refinement under high-pressure-double-torsion
- (2014) Mohammad Jahedi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Characterization of Crystallographic Texture and Intra-Grain Morphology in Cross-Rolled Tantalum
- (2014) Abhishek Bhattacharyya et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Observations on the Nonlinear Unloading Behavior of Advanced High Strength Steels
- (2014) Erik J. Pavlina et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A high-performance computational framework for fast crystal plasticity simulations
- (2013) Marko Knezevic et al. COMPUTATIONAL MATERIALS SCIENCE
- Evaluating the significance of hardening behavior and unloading modulus under strain reversal in sheet springback prediction
- (2013) Shun-lai Zang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- The effect of crystallographic orientation on the micromechanical deformation and failure behaviors of DP980 steel during uniaxial tension
- (2013) S.-H. Choi et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A polycrystal plasticity model for predicting mechanical response and texture evolution during strain-path changes: Application to beryllium
- (2013) Marko Knezevic et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Ductility of 304 stainless steel under pulsed uniaxial loading
- (2013) Graham W. Cullen et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Integration of self-consistent polycrystal plasticity with dislocation density based hardening laws within an implicit finite element framework: Application to low-symmetry metals
- (2013) Marko Knezevic et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- In situ TEM observations of reverse dislocation motion upon unloading in tensile-deformed UFG aluminium
- (2012) Frédéric Mompiou et al. ACTA MATERIALIA
- Stress–strain relationship between ferrite and martensite in a dual-phase steel studied by in situ neutron diffraction and crystal plasticity theories
- (2012) W. Woo et al. ACTA MATERIALIA
- Modeling mechanical response and texture evolution of α-uranium as a function of strain rate and temperature using polycrystal plasticity
- (2012) Marko Knezevic et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Long range internal stresses in single-phase crystalline materials
- (2012) M.E. Kassner et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Advanced Issues in springback
- (2012) Robert H. Wagoner et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Lattice strain measurements using synchrotron diffraction to calibrate a micromechanical modeling in a ferrite–cementite steel
- (2012) V. Taupin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Experimental and numerical study on geometrically necessary dislocations and non-homogeneous mechanical properties of the ferrite phase in dual phase steels
- (2011) J. Kadkhodapour et al. ACTA MATERIALIA
- Anisotropic stress–strain response and microstructure evolution of textured α-uranium
- (2011) Marko Knezevic et al. ACTA MATERIALIA
- A slip system-based kinematic hardening model application to in situ neutron diffraction of cyclic deformation of austenitic stainless steel
- (2011) J.A. Wollmershauser et al. INTERNATIONAL JOURNAL OF FATIGUE
- A micro-level strain analysis of a high-strength dual-phase steel
- (2011) Marianne Kapp et al. International Journal of Materials Research
- An elasto-viscoplastic formulation based on fast Fourier transforms for the prediction of micromechanical fields in polycrystalline materials
- (2011) Ricardo A. Lebensohn et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Multiscale modeling of plasticity based on embedding the viscoplastic self-consistent formulation in implicit finite elements
- (2011) Javier Segurado et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Necking and fracture of advanced high strength steels
- (2011) C. Nikhare et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Deformation twinning in AZ31: Influence on strain hardening and texture evolution
- (2010) Marko Knezevic et al. ACTA MATERIALIA
- Mechanical and microstructural single-crystal Bauschinger effects: Observation of reversible plasticity in copper during bending
- (2010) Eralp Demir et al. ACTA MATERIALIA
- Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging
- (2010) Marion Calcagnotto et al. ACTA MATERIALIA
- Experimental evaluation and constitutive modeling of non-proportional deformation for asymmetric steels
- (2010) Rahul K. Verma et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
- (2010) Marion Calcagnotto et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Rietveld texture analysis from TOF neutron diffraction data
- (2010) H.-R. Wenk et al. POWDER DIFFRACTION
- Crystal plasticity simulations using discrete Fourier transforms
- (2009) Marko Knezevic et al. ACTA MATERIALIA
- Grain size and orientation distributions: Application to yielding of α-titanium
- (2009) Bradley S. Fromm et al. ACTA MATERIALIA
- Tension–compression asymmetry of phosphor bronze for electronic parts and its effect on bending behavior
- (2009) Toshihiko Kuwabara et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Formability of advanced high strength steels
- (2009) Robert H. Wagoner et al. International Journal of Material Forming
- A review of some plasticity and viscoplasticity constitutive theories
- (2008) J.L. Chaboche INTERNATIONAL JOURNAL OF PLASTICITY
- About the determination of the thermal and athermal stress components from stress-relaxation experiments
- (2007) T. Kruml et al. ACTA MATERIALIA
- Computationally efficient database and spectral interpolation for fully plastic Taylor-type crystal plasticity calculations of face-centered cubic polycrystals
- (2007) Marko Knezevic et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A dislocation-based constitutive law for pure Zr including temperature effects
- (2007) I.J. Beyerlein et al. INTERNATIONAL JOURNAL OF PLASTICITY
Become a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get StartedAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started