Effects of Pressure and Number of Turns on Microstructural Homogeneity Developed in High-Pressure Double Torsion

The plasticity of highly oriented nano-layered Zr/Nb composites

(2016) Milan Ardeljan et al.   ACTA MATERIALIA

Low cycle fatigue behavior of direct metal laser sintered Inconel alloy 718

(2016) Sean Gribbin et al.   INTERNATIONAL JOURNAL OF FATIGUE

Strain rate and temperature sensitive multi-level crystal plasticity model for large plastic deformation behavior: Application to AZ31 magnesium alloy

(2016) Milan Ardeljan et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Effect of applied pressure on microstructure development and homogeneity in an aluminium alloy processed by high-pressure torsion

(2016) Piotr Bazarnik et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and tensile properties of Cu Al alloys processed by ECAP and rolling at cryogenic temperature

(2016) Wei Wei et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Texture formation in orthorhombic alpha-uranium under simple compression and rolling to high strains

(2016) Miroslav Zecevic et al.   JOURNAL OF NUCLEAR MATERIALS

Microstructure and mechanical behavior of direct metal laser sintered Inconel alloy 718

(2016) Derek H. Smith et al.   MATERIALS CHARACTERIZATION

Origin of texture development in orthorhombic uranium

(2016) Miroslav Zecevic et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and mechanical properties of carbon nanotubes reinforced aluminum matrix composites synthesized via equal-channel angular pressing

(2016) Hassan Zare et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Texture and microstructure evolution in nickel electrodeposited from an additive-free Watts electrolyte

(2016) Hossein Alimadadi et al.   SURFACE & COATINGS TECHNOLOGY

Residual stress and texture in Aluminum doped Zinc Oxide layers deposited by reactive radio frequency magnetron sputtering

(2016) C.L. Azanza Ricardo et al.   THIN SOLID FILMS

Compressive, shear, and fracture behavior of CNT reinforced Al matrix composites manufactured by severe plastic deformation

(2016) Hassan Zare et al.   MATERIALS & DESIGN

Bulk texture evolution of nanolamellar Zr–Nb composites processed via accumulative roll bonding

(2015) J.S. Carpenter et al.   ACTA MATERIALIA

Growth evolution of self-textured ZnO films deposited by magnetron sputtering at low temperatures

(2015) J.R.R. Bortoleto et al.   APPLIED SURFACE SCIENCE

Explicit incorporation of deformation twins into crystal plasticity finite element models

(2015) Milan Ardeljan et al.   COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING

The orientation and strain dependence of dislocation structure evolution in monotonically deformed polycrystalline copper

(2015) Jun Jiang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

A study of microstructure-driven strain localizations in two-phase polycrystalline HCP/BCC composites using a multi-scale model

(2015) Milan Ardeljan et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Predicting Texture Evolution in Ta and Ta-10W Alloys Using Polycrystal Plasticity

(2015) Marko Knezevic et al.   JOM

High-Pressure Double Torsion as a Severe Plastic Deformation Process: Experimental Procedure and Finite Element Modeling

(2015) Mohammad Jahedi et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Enhanced microstructural homogeneity in metal-matrix composites developed under high-pressure-double-torsion

(2015) Mohammad Jahedi et al.   MATERIALS CHARACTERIZATION

Anneal hardening of a nanostructured Cu–Al alloy processed by high-pressure torsion and rolling

(2015) Jingmei Tao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Evolution of microstructure and hardness in AZ31 alloy processed by high pressure torsion

(2015) Jitka Stráská et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Procedures for reducing large datasets of crystal orientations using generalized spherical harmonics

(2015) Marko Knezevic et al.   MECHANICS OF MATERIALS

Material-based design of the extrusion of bimetallic tubes

(2014) Marko Knezevic et al.   COMPUTATIONAL MATERIALS SCIENCE

A strain-rate and temperature dependent constitutive model for BCC metals incorporating non-Schmid effects: Application to tantalum–tungsten alloys

(2014) Marko Knezevic et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Texture evolution in two-phase Zr/Nb lamellar composites during accumulative roll bonding

(2014) Marko Knezevic et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Microstructural evolution and microhardness variations in a Cu–36Zn–2Pb alloy processed by high-pressure torsion

(2014) Hong Yan Zhang et al.   JOURNAL OF MATERIALS SCIENCE

Microstructural evolution in ultrafine-grained titanium processed by high-pressure torsion under different pressures

(2014) Chuan Ting Wang et al.   JOURNAL OF MATERIALS SCIENCE

A dislocation density based crystal plasticity finite element model: Application to a two-phase polycrystalline HCP/BCC composites

(2014) Milan Ardeljan et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

Texture evolution and enhanced grain refinement under high-pressure-double-torsion

(2014) Mohammad Jahedi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Characterization of Crystallographic Texture and Intra-Grain Morphology in Cross-Rolled Tantalum

(2014) Abhishek Bhattacharyya et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effects of processing on texture, internal stresses and mechanical properties during the pulsed electrodeposition of nanocrystalline and ultrafine-grained nickel

(2013) Kerstin Schüler et al.   ACTA MATERIALIA

Deformation behavior of the cobalt-based superalloy Haynes 25: Experimental characterization and crystal plasticity modeling

(2013) Marko Knezevic et al.   ACTA MATERIALIA

Microstructure Evolution and Mechanical Properties of Al-1080 Processed by a Combination of Equal Channel Angular Pressing and High Pressure Torsion

(2013) Mohamed Ibrahim Abd El Aal et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Anomalous Basal Slip Activity in Zirconium under High-strain Deformation

(2013) Marko Knezevic et al.   Materials Research Letters

Microstructure, texture and mechanical properties of aluminum processed by high-pressure tube twisting

(2012) M. Arzaghi et al.   ACTA MATERIALIA

Modeling mechanical response and texture evolution of α-uranium as a function of strain rate and temperature using polycrystal plasticity

(2012) Marko Knezevic et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Achieving homogeneity in a Cu–Zr alloy processed by high-pressure torsion

(2012) Jittraporn Wongsa-Ngam et al.   JOURNAL OF MATERIALS SCIENCE

Mechanical properties of copper after compression stage of high-pressure torsion

(2011) Yuepeng Song et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Comparison of microstructures and mechanical properties of a Cu–Ag alloy processed using different severe plastic deformation modes

(2011) Y.Z. Tian et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Three-dimensional finite element analysis of torsion extrusion (TE) as an SPD process

(2011) Mohammad Jahedi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A modification on ECAP process by incorporating torsional deformation

(2011) Behtash Mani et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Consolidation of commercial pure aluminum powder by torsional-equal channel angular pressing (T-ECAP) at room temperature

(2011) Behtash Mani et al.   POWDER TECHNOLOGY

Deformation twinning in AZ31: Influence on strain hardening and texture evolution

(2010) Marko Knezevic et al.   ACTA MATERIALIA

ECAP with back pressure for optimum strength and ductility in aluminium alloy 6016. Part 2: Mechanical properties and texture

(2010) P.W.J. Mckenzie et al.   ACTA MATERIALIA

Equal Channel Angular Pressing of a Mg-3Al-1Zn Alloy with Back Pressure

(2010) Feng Kang et al.   ADVANCED ENGINEERING MATERIALS

Study on the feasibility of the torsion extrusion (TE) process as a severe plastic deformation method for consolidation of Al powder

(2010) Mohammad Jahedi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of the high pressure torsion die geometry on the allotropic phase transformations in pure Zr

(2010) A.P. Zhilyaev et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural evolution in an Al-6061 alloy processed by high-pressure torsion

(2010) Aïcha Loucif et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Grain size and reversible beta-to-omega phase transformation in a Ti alloy

(2010) Y.B. Wang et al.   SCRIPTA MATERIALIA

First Experimental Observation of Shear Induced hcp to bcc Transformation in Pure Zr

(2009) M. T. Pérez-Prado et al.   PHYSICAL REVIEW LETTERS

Texture, microstructure and mechanical properties of equiaxed ultrafine-grained Zr fabricated by accumulative roll bonding

(2008) L JIANG   ACTA MATERIALIA

The effect of electrochemical adsorbates on texture and morphology development during zinc and zinc–cobalt electrodepositions

(2008) K. Raeissi et al.   ELECTROCHIMICA ACTA

Evaluating the influence of pressure and torsional strain on processing by high-pressure torsion

(2008) Cheng Xu et al.   JOURNAL OF MATERIALS SCIENCE

Low-temperature compaction of Ti–6Al–4V powder using equal channel angular extrusion with back pressure

(2008) R. Lapovok et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Using high-pressure torsion for metal processing: Fundamentals and applications

(2008) A ZHILYAEV et al.   PROGRESS IN MATERIALS SCIENCE

Shear deformation with imposed hydrostatic pressure for enhanced compaction of powder

(2008) R. Lapovok et al.   SCRIPTA MATERIALIA

The significance of slippage in processing by high-pressure torsion

(2008) Kaveh Edalati et al.   SCRIPTA MATERIALIA

Bulk nanocrystalline ω-Zr by high-pressure torsion

(2007) M.T. Pérez-Prado et al.   SCRIPTA MATERIALIA