Recent advances in Ti-6Al-4V additively manufactured by selective laser melting for biomedical implants: Prospect development
出版年份 2021 全文链接
标题
Recent advances in Ti-6Al-4V additively manufactured by selective laser melting for biomedical implants: Prospect development
作者
关键词
Selective laser melting, Ti-6Al-4V, Stress shielding effect, Chemical treatment, Surface coating, Osseointegration
出版物
JOURNAL OF ALLOYS AND COMPOUNDS
Volume 896, Issue -, Pages 163072
出版商
Elsevier BV
发表日期
2021-12-04
DOI
10.1016/j.jallcom.2021.163072
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Additive manufacturing and the COVID-19 challenges: An in-depth study
- (2021) Md. Sarower Tareq et al. JOURNAL OF MANUFACTURING SYSTEMS
- 3D printed Ti6Al4V bone scaffolds with different pore structure effects on bone ingrowth
- (2021) Fuyuan Deng et al. Journal of Biological Engineering
- Surface-treated 3D printed Ti-6Al-4V scaffolds with enhanced bone regeneration performance: an in vivo study
- (2021) Guangdao Zhang et al. Annals of Translational Medicine
- In vitro evaluation of electrochemically bioactivated Ti6Al4V 3D porous scaffolds
- (2021) Alexandr Myakinin et al. Materials Science & Engineering C-Materials for Biological Applications
- In vitro bio-tribological behaviour of textured nitride coating on selective laser melted Ti-6Al-4V alloy
- (2021) Xueyang Zhao et al. SURFACE & COATINGS TECHNOLOGY
- Influence of Successive Chemical and Thermochemical Treatments on Surface Features of Ti6Al4V Samples Manufactured by SLM
- (2021) Jesús E. González et al. Metals
- Effect of ultrasonic shot peening on microstructure evolution and corrosion resistance of selective laser melted Ti–6Al–4V alloy
- (2021) Qi Zhang et al. Journal of Materials Research and Technology-JMR&T
- Effects of laser shock peening on the hot corrosion behaviour of the selective laser melted Ti6Al4V titanium alloy
- (2021) Haifei Lu et al. CORROSION SCIENCE
- Effects of embedded spherical pore on the tensile properties of a selective laser melted Ti6Al4V alloy
- (2021) L.X. Meng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Bioactivation Treatment with Mixed Acid and Heat on Titanium Implants Fabricated by Selective Laser Melting Enhances Preosteoblast Cell Differentiation
- (2021) Phuc Thi Minh Le et al. Nanomaterials
- Lattice distortion in selective laser melting (SLM)-manufactured unstable β-type Ti-15Mo-5Zr-3Al alloy analyzed by high-precision X-ray diffractometry
- (2021) Aya Takase et al. SCRIPTA MATERIALIA
- Corrosion and passivation behavior of laser powder bed fusion produced Ti-6Al-4V in static/dynamic NaCl solutions with different concentrations
- (2021) P. Qin et al. CORROSION SCIENCE
- Mechanical properties and in vitro cytocompatibility of dense and porous Ti–6Al–4V ELI manufactured by selective laser melting technology for biomedical applications
- (2021) Santhosh Suresh et al. Journal of the Mechanical Behavior of Biomedical Materials
- Enhancing the corrosion protection of Ti-6Al-4V alloy through reactive sputtering niobium oxide thin films
- (2021) João Pedro Lopes do Nascimento et al. SURFACE & COATINGS TECHNOLOGY
- Effect of surface powder particles and morphologies on corrosion of Ti-6Al-4 V fabricated with different energy densities in selective laser melting
- (2021) Snehashis Pal et al. MATERIALS & DESIGN
- Porous tantalum structure integrated on Ti6Al4V base by Laser Powder Bed Fusion for enhanced bony-ingrowth implants: In vitro and in vivo validation
- (2021) Pengfei Lei et al. Bioactive Materials
- Effect of Nb addition on mechanical properties and corrosion behavior of Ti6Al4V alloy produced by selective laser melting
- (2020) Qingxuan Sui et al. JOURNAL OF MATERIALS RESEARCH
- Recent progress in porous TiNb-based alloys for biomedical implant applications
- (2020) Yong-Hua Li et al. MATERIALS SCIENCE AND TECHNOLOGY
- Surface Modification of Titanium and Titanium Alloys: Technologies, Developments, and Future Interests
- (2020) Lai-Chang Zhang et al. ADVANCED ENGINEERING MATERIALS
- Radiographic correlation of clinical shoulder deformity and patient perception following scapula fracture
- (2020) Joscelyn M Tatro et al. INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED
- Effect of COVID-19 on Hip and Knee Arthroplasty Surgical Volume in the United States
- (2020) Nicholas A. Bedard et al. JOURNAL OF ARTHROPLASTY
- Influence of selective laser melting scanning speed parameter on the surface morphology, surface roughness, and micropores for manufactured Ti6Al4V parts
- (2020) Mohd Faizal Sadali et al. JOURNAL OF MATERIALS RESEARCH
- Rational design, bio-functionalization and biological performance of hybrid additive manufactured titanium implants for orthopaedic applications: A review
- (2020) Jun Li et al. Journal of the Mechanical Behavior of Biomedical Materials
- Investigation of electrochemical corrosion behavior of additive manufactured Ti–6Al–4V alloy for medical implants in different electrolytes
- (2020) Ashutosh Sharma et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Physicochemical properties and cytocompatibility assessment of non-degradable scaffolds for bone tissue engineering applications
- (2020) H. Pereira et al. Journal of the Mechanical Behavior of Biomedical Materials
- Comparison of the osteoblastic activity of low elastic modulus Ti-24Nb-4Zr-8Sn alloy and pure titanium modified by physical and chemical methods
- (2020) Xinxin Zhan et al. Materials Science & Engineering C-Materials for Biological Applications
- Compressive fatigue properties of additive-manufactured Ti-6Al-4V cellular material with different porosities
- (2020) Ming-Wei Wu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Biofilm dispersion
- (2020) Kendra P. Rumbaugh et al. NATURE REVIEWS MICROBIOLOGY
- Effect of heat treatment on the corrosion resistance behavior of selective laser melted Ti6Al4V ELI
- (2020) Xingchen Yan et al. SURFACE & COATINGS TECHNOLOGY
- Surface roughness effect of SLM and EBM Ti-6Al-4V on multiaxial high cycle fatigue
- (2020) Bastien Vayssette et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Selective Laser Melting of Ti-6Al-4V: The Impact of Post-processing on the Tensile, Fatigue and Biological Properties for Medical Implant Applications
- (2020) Parastoo Jamshidi et al. Materials
- The effect of manufacturing defects on the fatigue life of selective laser melted Ti-6Al-4V structures
- (2020) Y.N. Hu et al. MATERIALS & DESIGN
- Microstructural study and mechanical characterisation of heat-treated direct metal laser sintered Ti6Al4V for biomedical applications
- (2020) Dheepa Srinivasan et al. MATERIALS TECHNOLOGY
- Challenges and Opportunities for Integrating Dealloying Methods into Additive Manufacturing
- (2020) A. Chuang et al. Materials
- Recent Development in Beta Titanium Alloys for Biomedical Applications
- (2020) Liang-Yu Chen et al. Metals
- Effects of heat treatment on microstructure and mechanical properties of selective laser melted Ti-6Al-4V lattice materials
- (2020) Nan Jin et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Selective Laser Melting of Ti6Al4V sub-millimetric cellular structures: Prediction of dimensional deviations and mechanical performance
- (2020) F. Bartolomeu et al. Journal of the Mechanical Behavior of Biomedical Materials
- Osteogenic and antibacterial surfaces on additively manufactured porous Ti-6Al-4V implants: Combining silver nanoparticles with hydrothermally synthesized HA nanocrystals
- (2020) Mohammad Fazel et al. Materials Science & Engineering C-Materials for Biological Applications
- Microstructural features and compressive properties of SLM Ti6Al4V lattice structures
- (2020) Jinguo Ge et al. SURFACE & COATINGS TECHNOLOGY
- Selective Laser Melting and Electron Beam Melting of Ti6Al4V for Orthopedic Applications: A Comparative Study on the Applied Building Direction
- (2020) Paola Ginestra et al. Materials
- The corrosion behavior of Ti6Al4V fabricated by selective laser melting in the artificial saliva with different fluoride concentrations and pH values
- (2020) Hongwei Zhang et al. CORROSION SCIENCE
- Mechanical Properties and Microstructure of DMLS Ti6Al4V Alloy Dedicated to Biomedical Applications
- (2019) Żaneta Mierzejewska et al. Materials
- A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
- (2019) Lai‐Chang Zhang et al. ADVANCED ENGINEERING MATERIALS
- Failure and energy absorption characteristics of four lattice structures under dynamic loading
- (2019) Nan Jin et al. MATERIALS & DESIGN
- Effect of selective laser melting parameters on morphology, microstructure, densification and mechanical properties of supersaturated silver alloy
- (2019) Wei Xiong et al. MATERIALS & DESIGN
- Surface Modification of Biomedical Titanium Alloy: Micromorphology, Microstructure Evolution and Biomedical Applications
- (2019) Wei Liu et al. Coatings
- Bionic mechanical design and 3D printing of novel porous Ti6Al4V implants for biomedical applications
- (2019) Wen-ming Peng et al. Journal of Zhejiang University-SCIENCE B
- Partial Bone Formation in Additive Manufactured Porous Implants Reduces Predicted Stress and Danger of Fatigue Failure
- (2019) Vee San Cheong et al. ANNALS OF BIOMEDICAL ENGINEERING
- The role of bone cells in immune regulation during the course of infection
- (2019) Asuka Terashima et al. Seminars in Immunopathology
- Effect of Build Orientation on the Corrosion Behavior and Mechanical Properties of Selective Laser Melted Ti-6Al-4V
- (2019) Qingxuan Sui et al. Metals
- The manufacturability and compression properties of the Schwarz Diamond type Ti6Al4V cellular lattice fabricated by selective laser melting
- (2019) Joanna Maszybrocka et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Mechanical performance of highly permeable laser melted Ti6Al4V bone scaffolds
- (2019) Arun Arjunan et al. Journal of the Mechanical Behavior of Biomedical Materials
- Morphology, composition and electrochemical properties of bioactive-TiO2/HA on CP-Ti and Ti6Al4V substrates fabricated by alkali treatment of hybrid plasma electrolytic oxidation process (estimation of porosity from EIS results)
- (2019) H. Fakhr Nabavi et al. SURFACE & COATINGS TECHNOLOGY
- Elastic Mechanical Properties of 45S5-Based Bioactive Glass–Ceramic Scaffolds
- (2019) Francesco Baino et al. Materials
- Gaseous surface hardening of Ti-6Al-4V fabricated by selective laser melting
- (2019) Emilie H. Valente et al. SURFACE & COATINGS TECHNOLOGY
- Animal Origin Bioactive Hydroxyapatite Thin Films Synthesized by RF-Magnetron Sputtering on 3D Printed Cranial Implants
- (2019) Diana Chioibasu et al. Metals
- Effect of roughness on electrochemical and pitting corrosion of Ti-6Al-4V alloy in 12 wt.% HCl solution at 35 °C
- (2019) Guangfang Chi et al. Journal of Materials Research and Technology-JMR&T
- Metallurgy principles applied to powder bed fusion 3D printing/additive manufacturing of personalized and optimized metal and alloy biomedical implants: an overview
- (2019) L.E. Murr Journal of Materials Research and Technology-JMR&T
- Analysis of Total Knee Arthroplasty revision causes
- (2018) Anne Postler et al. BMC MUSCULOSKELETAL DISORDERS
- The enabling role of dealloying in the creation of specific hierarchical porous metal structures—A review
- (2018) T. Song et al. CORROSION SCIENCE
- Ciprofloxacin derivatives and their antibacterial activities
- (2018) Gui-Fu Zhang et al. EUROPEAN JOURNAL OF MEDICINAL CHEMISTRY
- Statistical and optimize of lattice structures with selective laser melting (SLM) of Ti6AL4V material
- (2018) K. Kadirgama et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: A review
- (2018) H. Shipley et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- The Influence of Selective Laser Melting (SLM) Process Parameters on In-Vitro Cell Response
- (2018) Bartłomiej Wysocki et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Effect of subtransus heat treatment on the microstructure and mechanical properties of additively manufactured Ti-6Al-4V alloy
- (2018) Xiang-Yu Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Synthesis of Ti-5Al, Ti-6Al-7Nb, and Ti-22Al-25Nb alloys from elemental powders using powder-bed fusion additive manufacturing
- (2018) Igor Polozov et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of heat treatment on the phase transformation and mechanical properties of Ti6Al4V fabricated by selective laser melting
- (2018) Xingchen Yan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Heat treatments effects on functionalization and corrosion behavior of Ti-6Al-4V ELI alloy made by additive manufacturing
- (2018) Guilherme Arthur Longhitano et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Predictors for Long-Term Hip Survivorship Following Acetabular Fracture Surgery
- (2018) Diederik O. Verbeek et al. JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME
- A study of the microstructures and mechanical properties of Ti6Al4V fabricated by SLM under vacuum
- (2018) Bin Zhou et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Additive manufacturing: scientific and technological challenges, market uptake and opportunities
- (2018) Syed A.M. Tofail et al. Materials Today
- Tribological, electrochemical and biocompatibility properties of Ti6Al4V alloy produced by selective laser melting method and then processed using gas nitriding, CN or Ti-C:H coating treatments
- (2018) W.H. Kao et al. SURFACE & COATINGS TECHNOLOGY
- Optimization of selective laser melting parameters and influence of post heat treatment on microstructure and mechanical properties of maraging steel
- (2018) James Mutua et al. MATERIALS & DESIGN
- On the effect of internal channels and surface roughness on the high-cycle fatigue performance of Ti-6Al-4V processed by SLM
- (2018) Johannes Günther et al. MATERIALS & DESIGN
- Simultaneous improvement in strength and plasticity of Ti-24Nb-4Zr-8Sn manufactured by selective laser melting
- (2018) C.L. Yang et al. MATERIALS & DESIGN
- Selective laser melting of titanium alloy with 50 wt% tantalum: Effect of laser process parameters on part quality
- (2018) Swee Leong Sing et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Selective Laser Melting processed Ti6Al4V lattices with graded porosities for dental applications
- (2018) Zena J Wally et al. Journal of the Mechanical Behavior of Biomedical Materials
- Effect of heat treatment on the microstructure and mechanical properties of Ti6Al4V gradient structures manufactured by selective laser melting
- (2018) Mingkang Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Selective laser melting-fabricated Ti-6Al-4V alloy: Microstructural inhomogeneity, consequent variations in elastic modulus and implications
- (2018) J.Y. Cho et al. OPTICS AND LASER TECHNOLOGY
- Deformation mechanisms in surface nano-crystallization of low elastic modulus Ti6Al4V/Zn composite during severe plastic deformation
- (2018) Yuting Lv et al. SCRIPTA MATERIALIA
- Configuration Optimization Design of Ti6Al4V Lattice Structure Formed by SLM
- (2018) Long Bai et al. Materials
- Study on Porous Mg-Zn-Zr ZK61 Alloys Produced by Laser Additive Manufacturing
- (2018) Min Zhang et al. Metals
- Femtosecond Laser Produced Hydrophobic Hierarchical Structures on Additive Manufacturing Parts
- (2018) Lishi Jiao et al. Nanomaterials
- Effect of porosity variation strategy on the performance of functionally graded Ti-6Al-4V scaffolds for bone tissue engineering
- (2018) Xiang-Yu Zhang et al. MATERIALS & DESIGN
- Antibacterial surface modification of titanium implants in orthopaedics
- (2018) Wich Orapiriyakul et al. Journal of Tissue Engineering
- Osseointegration and current interpretations of the bone-implant interface
- (2018) Furqan A. Shah et al. Acta Biomaterialia
- Investigation on the effect of heat treatment and process parameters on the tensile behaviour of SLM Ti-6Al-4V parts
- (2018) Amir Mahyar Khorasani et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Cellular biology of fracture healing
- (2018) Chelsea S. Bahney et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- Optimization of SLM process parameters for Ti6Al4V medical implants
- (2018) Mahmoud Elsayed et al. RAPID PROTOTYPING JOURNAL
- Effect of Selective Laser Melting Process Parameters on the Quality of Al Alloy Parts: Powder Characterization, Density, Surface Roughness, and Dimensional Accuracy
- (2018) Ahmed Maamoun et al. Materials
- Effect of Unit Cell Type and Pore Size on Porosity and Mechanical Behavior of Additively Manufactured Ti6Al4V Scaffolds
- (2018) Haizum Zaharin et al. Materials
- Resemblance in Corrosion Behavior of Selective Laser Melted and Traditional Monolithic β Ti-24Nb-4Zr-8Sn Alloy
- (2018) Peng Qin et al. ACS Biomaterials-Science & Engineering
- Functionally graded porous scaffolds in multiple patterns: New design method, physical and mechanical properties
- (2018) Fei Liu et al. MATERIALS & DESIGN
- Additive manufacturing of Ti6Al4V alloy: A review
- (2018) Shunyu Liu et al. MATERIALS & DESIGN
- Investigation of the structure and mechanical properties of additively manufactured Ti-6Al-4V biomedical scaffolds designed with a Schwartz primitive unit-cell
- (2018) Nicolas Soro et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fatigue performances of selective laser melted Ti-6Al-4V alloy: Influence of surface finishing, hot isostatic pressing and heat treatments
- (2018) Hanchen Yu et al. INTERNATIONAL JOURNAL OF FATIGUE
- Osteomyelitis
- (2017) Steven K. Schmitt INFECTIOUS DISEASE CLINICS OF NORTH AMERICA
- Application of mechanical surface finishing processes for roughness reduction and fatigue improvement of additively manufactured Ti-6Al-4V parts
- (2017) S. Bagehorn et al. INTERNATIONAL JOURNAL OF FATIGUE
- Microstructure and mechanical properties of open-cell porous Ti-6Al-4V fabricated by selective laser melting
- (2017) S.Y. Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Biomedical materials and techniques to improve the tribological, mechanical and biomedical properties of orthopedic implants – A review article
- (2017) Mahmoud Z. Ibrahim et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Bioglass® 45S5-based composites for bone tissue engineering and functional applications
- (2017) M. Rizwan et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Scapula fracture incidence in reverse total shoulder arthroplasty using screws above or below metaglene central cage: clinical and biomechanical outcomes
- (2017) Justin C. Kennon et al. JOURNAL OF SHOULDER AND ELBOW SURGERY
- Heat Treatment Degrading the Corrosion Resistance of Selective Laser Melted Ti-6Al-4V Alloy
- (2017) Nianwei Dai et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Tribological behavior of Ti6Al4V cellular structures produced by Selective Laser Melting
- (2017) F. Bartolomeu et al. Journal of the Mechanical Behavior of Biomedical Materials
- Promising characteristics of gradient porosity Ti-6Al-4V alloy prepared by SLM process
- (2017) Michaela Fousová et al. Journal of the Mechanical Behavior of Biomedical Materials
- Bionic mechanical design of titanium bone tissue implants and 3D printing manufacture
- (2017) Xuan Pei et al. MATERIALS LETTERS
- Mechanical stability of custom-made implants: Numerical study of anatomical device and low elastic Young's modulus alloy
- (2017) P. Didier et al. Materials Science & Engineering C-Materials for Biological Applications
- Corrosion and surface modification on biocompatible metals: A review
- (2017) R.I.M. Asri et al. Materials Science & Engineering C-Materials for Biological Applications
- Microstructural and surface modifications and hydroxyapatite coating of Ti-6Al-4V triply periodic minimal surface lattices fabricated by selective laser melting
- (2017) Chunze Yan et al. Materials Science & Engineering C-Materials for Biological Applications
- Influence mechanism of parameters process and mechanical properties evolution mechanism of maraging steel 300 by selective laser melting
- (2017) Yuchao Bai et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of Selective Laser Melted Ti6Al4V
- (2017) Haider Ali et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Anisotropic response of Ti-6Al-4V alloy fabricated by 3D printing selective laser melting
- (2017) L.Y. Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Antibacterial activity and biofilm inhibition by surface modified titanium alloy medical implants following application of silver, titanium dioxide and hydroxyapatite nanocoatings
- (2017) A. Besinis et al. Nanotoxicology
- Osteogenic Comparison on Selective Laser Melting Printed and Sandblasting-Acid-Etching Ti Substrates for Customized Implant Applications
- (2017) Mengke Wang et al. Science of Advanced Materials
- Surface damage mitigation of Ti6Al4V alloy via thermal oxidation for oil and gas exploitation application: characterization of the microstructure and evaluation of the surface performance
- (2017) Naiming Lin et al. RSC Advances
- Osteoimmunology in Bone Fracture Healing
- (2017) Takehito Ono et al. Current Osteoporosis Reports
- Effects of Aging on Fracture Healing
- (2017) Dan Clark et al. Current Osteoporosis Reports
- Improved fatigue endurance ratio of additive manufactured Ti-6Al-4V lattice by hot isostatic pressing
- (2017) Ming-Wei Wu et al. MATERIALS & DESIGN
- Effect of Nb content on microstructure, property and in vitro apatite-forming capability of Ti-Nb alloys fabricated via selective laser melting
- (2017) Qian Wang et al. MATERIALS & DESIGN
- Wear resistance enhancement of titanium alloy (Ti–6Al–4V) by ball burnishing process
- (2017) Goutam Devaraya Revankar et al. Journal of Materials Research and Technology-JMR&T
- Additively Manufactured Macroporous Titanium with Silver-Releasing Micro-/Nanoporous Surface for Multipurpose Infection Control and Bone Repair – A Proof of Concept
- (2016) Zhaojun Jia et al. ACS Applied Materials & Interfaces
- Additive Manufacturing of Biomaterials, Tissues, and Organs
- (2016) Amir A. Zadpoor et al. ANNALS OF BIOMEDICAL ENGINEERING
- Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
- (2016) Xiaojian Wang et al. BIOMATERIALS
- Review of zirconia-based bioceramic: Surface modification and cellular response
- (2016) Ginny Soon et al. CERAMICS INTERNATIONAL
- Corrosion behavior of selective laser melted Ti-6Al-4 V alloy in NaCl solution
- (2016) Nianwei Dai et al. CORROSION SCIENCE
- Bioactive treatment promotes osteoblast differentiation on titanium materials fabricated by selective laser melting technology
- (2016) Masako TSUKANAKA et al. DENTAL MATERIALS JOURNAL
- Microstructure, static properties, and fatigue crack growth mechanisms in Ti-6Al-4V fabricated by additive manufacturing: LENS and EBM
- (2016) Yuwei Zhai et al. ENGINEERING FAILURE ANALYSIS
- Improved bioactivity of selective laser melting titanium: Surface modification with micro-/nano-textured hierarchical topography and bone regeneration performance evaluation
- (2016) Jia-yun Xu et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment
- (2016) Naoya Taniguchi et al. Materials Science & Engineering C-Materials for Biological Applications
- Review on manufacture by selective laser melting and properties of titanium based materials for biomedical applications
- (2016) L.-C. Zhang et al. MATERIALS TECHNOLOGY
- Post Processing and Biological Evaluation of the Titanium Scaffolds for Bone Tissue Engineering
- (2016) Bartłomiej Wysocki et al. Materials
- Polymeric Biomaterials for Medical Implants and Devices
- (2016) Adrian J.T. Teo et al. ACS Biomaterials-Science & Engineering
- Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melting
- (2016) Xiaoli Zhao et al. MATERIALS & DESIGN
- Polymeric Biomaterials for Medical Implants and Devices
- (2016) Adrian J.T. Teo et al. ACS Biomaterials Science & Engineering
- Posterior Lumbar Interbody Fusion
- (2016) Christian P. DiPaola et al. JOURNAL OF THE AMERICAN ACADEMY OF ORTHOPAEDIC SURGEONS
- Novel Osteogenic Ti-6Al-4V Device For Restoration Of Dental Function In Patients With Large Bone Deficiencies: Design, Development And Implementation
- (2016) D. J. Cohen et al. Scientific Reports
- Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review
- (2015) Lai-Chang Zhang et al. ADVANCED ENGINEERING MATERIALS
- Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
- (2015) Galina Kasperovich et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Thermomechanical response of 3D laser-deposited Ti–6Al–4V alloy over a wide range of strain rates and temperatures
- (2015) Peng-Hui Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Implantation of customized 3-D printed titanium prosthesis in limb salvage surgery: a case series and review of the literature
- (2015) Hongbin Fan et al. World Journal of Surgical Oncology
- Surface Modifications and Their Effects on Titanium Dental Implants
- (2015) A. Jemat et al. Biomed Research International
- Biology of Bone Tissue: Structure, Function, and Factors That Influence Bone Cells
- (2015) Rinaldo Florencio-Silva et al. Biomed Research International
- Bone and metal: An orthopaedic perspective on osseointegration of metals
- (2014) Vitali Goriainov et al. Acta Biomaterialia
- Immobilisation of an antibacterial drug to Ti6Al4V components fabricated using selective laser melting
- (2014) Jayasheelan Vaithilingam et al. APPLIED SURFACE SCIENCE
- Bone regeneration performance of surface-treated porous titanium
- (2014) Saber Amin Yavari et al. BIOMATERIALS
- Silver deposition on titanium surface by electrochemical anodizing process reduces bacterial adhesion ofStreptococcus sanguinisandLactobacillus salivarius
- (2014) Maria Godoy-Gallardo et al. CLINICAL ORAL IMPLANTS RESEARCH
- Scaffold Design for Bone Regeneration
- (2014) Liliana Polo-Corrales et al. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY
- Manufacturing and Characterization of Ti6Al4V Lattice Components Manufactured by Selective Laser Melting
- (2014) Sabina Campanelli et al. Materials
- New Developments of Ti-Based Alloys for Biomedical Applications
- (2014) Yuhua Li et al. Materials
- Implantable zirconia bioceramics for bone repair and replacement: A chronological review
- (2014) Adeel Afzal Materials Express
- The effect of crystallization of bioactive bioglass 45S5 on apatite formation and degradation
- (2013) Manja Plewinski et al. DENTAL MATERIALS
- Study on Notch Sensitivity of Fracture Properties of Concrete Containing Nano-SiO2Particles and Fly Ash
- (2013) Peng Zhang et al. Journal of Nanomaterials
- Bone Regeneration by the Osteoconductivity of Porous Titanium Implants Manufactured by Selective Laser Melting: A Histological and Micro Computed Tomography Study in the Rabbit
- (2013) Michael de Wild et al. TISSUE ENGINEERING PART A
- The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds
- (2012) S. Van Bael et al. Acta Biomaterialia
- Immobilized antibiotics to prevent orthopaedic implant infections
- (2012) Noreen J. Hickok et al. ADVANCED DRUG DELIVERY REVIEWS
- An innovative, easily fabricated, silver nanoparticle-based titanium implant coating: development and analytical characterization
- (2012) E. De Giglio et al. ANALYTICAL AND BIOANALYTICAL CHEMISTRY
- Deformation and fracture behavior of laser processed dense and porous Ti6Al4V alloy under static and dynamic loading
- (2012) N. Biswas et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Osteoinduction of porous Ti implants with a channel structure fabricated by selective laser melting
- (2011) A. Fukuda et al. Acta Biomaterialia
- Types of Implant Surgical Guides in Dentistry: A Review
- (2011) Kathleen Manuela D'Souza et al. Journal of Oral Implantology
- Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V
- (2011) Bo Song et al. MATERIALS & DESIGN
- As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
- (2011) T. Vilaro et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
- (2011) L.C. Zhang et al. SCRIPTA MATERIALIA
- Bioactive Ti metal analogous to human cancellous bone: Fabrication by selective laser melting and chemical treatments
- (2010) Deepak K. Pattanayak et al. Acta Biomaterialia
- The regulation of stem cell differentiation by cell-cell contact on micropatterned material surfaces
- (2009) Jian Tang et al. BIOMATERIALS
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started