Catalytic pyrolysis kinetic behaviour of glass fibre-reinforced epoxy resin composites over ZSM-5 zeolite catalyst
出版年份 2022 全文链接
标题
Catalytic pyrolysis kinetic behaviour of glass fibre-reinforced epoxy resin composites over ZSM-5 zeolite catalyst
作者
关键词
Glass fibre-reinforced epoxy resin composites, Pyrolysis, Zeolite catalyst, TG-FTIR analysis, Pyrolysis kinetic behaviour
出版物
FUEL
Volume 315, Issue -, Pages 123235
出版商
Elsevier BV
发表日期
2022-01-18
DOI
10.1016/j.fuel.2022.123235
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Rapid photocatalytic degradation of phenol from water using composite nanofibers under UV
- (2021) Alaa Mohamed et al. Environmental Sciences Europe
- A review on recycling and reuse methods for carbon fiber/glass fiber composites waste from wind turbine blades
- (2021) Manjeet Rani et al. COMPOSITES PART B-ENGINEERING
- Microcrystalline paraffin wax, biogas, carbon particles and aluminum recovery from metallised food packaging plastics using pyrolysis, mechanical and chemical treatments
- (2021) Samy Yousef et al. JOURNAL OF CLEANER PRODUCTION
- Functionalization of char derived from pyrolysis of metallised food packaging plastics waste and its application as a filler in fiberglass/epoxy composites
- (2021) Samy Yousef et al. PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
- Catalytic Pyrolysis Kinetic Behavior and TG-FTIR-GC–MS Analysis of Metallized Food Packaging Plastics with Different Concentrations of ZSM-5 Zeolite Catalyst
- (2021) Justas Eimontas et al. Polymers
- Morphology, compositions, thermal behavior and kinetics of pyrolysis of lint-microfibers generated from clothes dryer
- (2021) Samy Yousef et al. JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS
- Pyrolysis Kinetic Behaviour of Glass Fibre-Reinforced Epoxy Resin Composites Using Linear and Nonlinear Isoconversional Methods
- (2021) Samy Yousef et al. Polymers
- Gasification kinetics of char derived from metallised food packaging plastics waste pyrolysis
- (2021) Samy Yousef et al. ENERGY
- Pyrolysis kinetic behaviour and TG-FTIR-GC–MS analysis of Coronavirus Face Masks
- (2021) Samy Yousef et al. JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS
- A comprehensive study on the oxidative pyrolysis of epoxy resin from fiber/epoxy composites: Product characteristics and kinetics
- (2021) Chuan Ma et al. JOURNAL OF HAZARDOUS MATERIALS
- Pyrolysis and gasification kinetic behavior of mango seed shells using TG-FTIR-GC–MS system under N2 and CO2 atmospheres
- (2021) Samy Yousef et al. RENEWABLE ENERGY
- Wear Resistance of the Glass-Fiber Reinforced Polymer Composite with the Addition of Quartz Filler
- (2021) Wojciech Zurowski et al. Materials
- Pyrolysis kinetic behavior and TG-FTIR-GC–MS analysis of end-life ultrafiltration polymer nanocomposite membranes
- (2021) Samy Yousef et al. CHEMICAL ENGINEERING JOURNAL
- Influence of carbon black filler on pyrolysis kinetic behaviour and TG-FTIR-GC–MS analysis of glass fibre reinforced polymer composites
- (2021) Samy Yousef et al. ENERGY
- Ply scale modelling of the quasi-static and fatigue behaviours of an acrylic-thermoplastic-matrix and glass-fibre-reinforced laminated composite covering the service temperature range of wind turbine blades
- (2021) Eileen Boissin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Catalytic pyrolysis kinetic behaviour and TG-FTIR-GC–MS analysis of waste fishing nets over ZSM-5 zeolite catalyst for caprolactam recovery
- (2021) Justas Eimontas et al. RENEWABLE ENERGY
- Recovery and reuse of carbon fibre and acrylic resin from thermoplastic composites used in marine application
- (2021) Haithem Bel Haj Frej et al. RESOURCES CONSERVATION AND RECYCLING
- Ultra-permeable CNTs/PES membranes with a very low CNTs content and high H2/N2 and CH4/N2 selectivity for clean energy extraction applications
- (2021) Samy Yousef et al. Journal of Materials Research and Technology-JMR&T
- Development of a low cost and green microwave assisted approach towards the circular carbon fibre composites
- (2020) Omid Zabihi et al. COMPOSITES PART B-ENGINEERING
- High-performance fiberglass/epoxy reinforced by functionalized CNTs for vehicle applications with less fuel consumption and greenhouse gas emissions
- (2020) Sharath P. Subadra et al. POLYMER TESTING
- A new industrial technology for closing the loop of full-size waste motherboards using chemical-ultrasonic-mechanical treatment
- (2020) Samy Yousef et al. PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
- Modeling of Metalized Food Packaging Plastics Pyrolysis Kinetics Using an Independent Parallel Reactions Kinetic Model
- (2020) Samy Yousef et al. Polymers
- Damage Process in Glass Fiber Reinforced Polymer Specimens Using Acoustic Emission Technique with Low Frequency Acquisition
- (2020) Leandro Friedrich et al. COMPOSITE STRUCTURES
- Superhydrophilic functionalized graphene/fiberglass/epoxy laminates with high mechanical, impact and thermal performance and treated by plasma
- (2020) Samy Yousef et al. POLYMER TESTING
- Low velocity impact and pseudo-ductile behaviour of carbon/glass/epoxy and carbon/glass/PMMA hybrid composite laminates for aircraft application at service temperature
- (2020) Sharath P. Subadra et al. POLYMER TESTING
- A new strategy for using Lint-Microfibers Generated from Clothes Dryer as a sustainable source of renewable energy
- (2020) Samy Yousef et al. SCIENCE OF THE TOTAL ENVIRONMENT
- Pyrolysis kinetic behavior and TG-FTIR-GC–MS analysis of metallised food packaging plastics
- (2020) Samy Yousef et al. FUEL
- Pyrolysis Kinetic Study and Reaction Mechanism of Epoxy Glass Fiber Reinforced Plastic by Thermogravimetric Analyzer (TG) and TG–FTIR (Fourier-Transform Infrared) Techniques
- (2020) Yuanhua Qiao et al. Polymers
- CO2/CH4, CO2/N2 and CO2/H2 selectivity performance of PES membranes under high pressure and temperature for biogas upgrading systems
- (2020) Samy Yousef et al. Environmental Technology & Innovation
- Application of supercritical water for green recycling of epoxy-based carbon fiber reinforced plastic
- (2019) Young Nam Kim et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Catalytic fast pyrolysis of maize straw with a core–shell ZSM-5@SBA-15 catalyst for producing phenols and hydrocarbons
- (2019) Xiangfei Xue et al. BIORESOURCE TECHNOLOGY
- Investigation of surface modification and volume content of glass and carbon fibres from fibre reinforced polymer waste for reinforcing concrete
- (2019) Magdalena Kimm et al. JOURNAL OF HAZARDOUS MATERIALS
- Thermal properties enhancement of epoxy resins by incorporating polybenzimidazole nanofibers filled with graphene and carbon nanotubes as reinforcing material
- (2019) V. Datsyuk et al. POLYMER TESTING
- Improving activity of ZSM-5 zeolite catalyst for the production of monomeric aromatics/phenolics from hydrolysis lignin via catalytic fast pyrolysis
- (2018) Hooman Paysepar et al. APPLIED CATALYSIS A-GENERAL
- Multifunctional epoxy/carbon fiber laminates for thermal energy storage and release
- (2018) Giulia Fredi et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Recycling of bare waste printed circuit boards as received using an organic solvent technique at a low temperature
- (2018) Samy Yousef et al. JOURNAL OF CLEANER PRODUCTION
- Recovery of gold, other metallic and non-metallic components of full-size waste random access memory
- (2018) Maksym Tatariants et al. JOURNAL OF CLEANER PRODUCTION
- A critical review on recycling of end-of-life carbon fibre/glass fibre reinforced composites waste using pyrolysis towards a circular economy
- (2018) S.R. Naqvi et al. RESOURCES CONSERVATION AND RECYCLING
- Comparing Life Cycle Energy and Global Warming Potential of Carbon Fiber Composite Recycling Technologies and Waste Management Options
- (2018) Fanran Meng et al. ACS Sustainable Chemistry & Engineering
- Recycling glass fiber thermoplastic composites from wind turbine blades
- (2018) Dylan S. Cousins et al. JOURNAL OF CLEANER PRODUCTION
- Catalytic co-pyrolysis of epoxy-printed circuit board and plastics over HZSM-5 and HY
- (2017) Young-Min Kim et al. JOURNAL OF CLEANER PRODUCTION
- Anticipating in-use stocks of carbon fiber reinforced polymers and related waste flows generated by the commercial aeronautical sector until 2050
- (2017) Anaële Lefeuvre et al. RESOURCES CONSERVATION AND RECYCLING
- Characterization of waste printed circuit boards recycled using a dissolution approach and ultrasonic treatment at low temperatures
- (2017) Maksym Tatariants et al. RSC Advances
- Recovery of glass fibre and carbon fibres from reinforced thermosets by batch pyrolysis and investigation of fibre re-using as reinforcement in LDPE matrix
- (2016) Jude A. Onwudili et al. COMPOSITES PART B-ENGINEERING
- Recent advances in the catalytic hydrodeoxygenation of bio-oil
- (2016) Heejin Lee et al. KOREAN JOURNAL OF CHEMICAL ENGINEERING
- Mechanical properties of fire-retardant glass fiber-reinforced polymer materials with alumina tri-hydrate filler
- (2015) Michaela R. Petersen et al. COMPOSITES PART B-ENGINEERING
- Pyrolysis characteristics of glass fiber-reinforced plastic (GFRP) under isothermal conditions
- (2015) Young Min Yun et al. JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS
- Current status of recycling of fibre reinforced polymers: Review of technologies, reuse and resulting properties
- (2015) Géraldine Oliveux et al. PROGRESS IN MATERIALS SCIENCE
- Pyrolysis characteristics of GFRP (Glass Fiber Reinforced Plastic) under non-isothermal conditions
- (2014) Young Min Yun et al. FUEL
- Aromatics and phenols from catalytic pyrolysis of Douglas fir pellets in microwave with ZSM-5 as a catalyst
- (2012) Lu Wang et al. JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS
- Near- and supercritical solvolysis of carbon fibre reinforced polymers (CFRPs) for recycling carbon fibers as a valuable resource: State of the art
- (2012) Christelle Morin et al. JOURNAL OF SUPERCRITICAL FLUIDS
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started