Pyrolysis Kinetic Behaviour of Glass Fibre-Reinforced Epoxy Resin Composites Using Linear and Nonlinear Isoconversional Methods
出版年份 2021 全文链接
标题
Pyrolysis Kinetic Behaviour of Glass Fibre-Reinforced Epoxy Resin Composites Using Linear and Nonlinear Isoconversional Methods
作者
关键词
-
出版物
Polymers
Volume 13, Issue 10, Pages 1543
出版商
MDPI AG
发表日期
2021-05-12
DOI
10.3390/polym13101543
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Rapid photocatalytic degradation of phenol from water using composite nanofibers under UV
- (2021) Alaa Mohamed et al. Environmental Sciences Europe
- Microcrystalline paraffin wax, biogas, carbon particles and aluminum recovery from metallised food packaging plastics using pyrolysis, mechanical and chemical treatments
- (2021) Samy Yousef et al. JOURNAL OF CLEANER PRODUCTION
- Functionalization of char derived from pyrolysis of metallised food packaging plastics waste and its application as a filler in fiberglass/epoxy composites
- (2021) Samy Yousef et al. PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
- Catalytic Pyrolysis Kinetic Behavior and TG-FTIR-GC–MS Analysis of Metallized Food Packaging Plastics with Different Concentrations of ZSM-5 Zeolite Catalyst
- (2021) Justas Eimontas et al. Polymers
- Combined analytical strategies for chemical and physical characterization of tar from torrefaction of olive stone
- (2021) Anna Trubetskaya et al. FUEL
- Morphology, compositions, thermal behavior and kinetics of pyrolysis of lint-microfibers generated from clothes dryer
- (2021) Samy Yousef et al. JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS
- Pyrolysis kinetic behaviour and TG-FTIR-GC–MS analysis of Coronavirus Face Masks
- (2021) Samy Yousef et al. JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS
- A comprehensive study on the oxidative pyrolysis of epoxy resin from fiber/epoxy composites: Product characteristics and kinetics
- (2021) Chuan Ma et al. JOURNAL OF HAZARDOUS MATERIALS
- Pyrolysis and gasification kinetic behavior of mango seed shells using TG-FTIR-GC–MS system under N2 and CO2 atmospheres
- (2021) Samy Yousef et al. RENEWABLE ENERGY
- A New Industrial Technology for Mass Production of Graphene/PEBA Membranes for CO2/CH4 Selectivity with High Dispersion, Thermal and Mechanical Performance
- (2020) Samy Yousef et al. Polymers
- Analysis of emissions from combusting pyrolysis products
- (2020) Nicholas R. Schwartz et al. FUEL
- Comparative study on the evolution of physicochemical properties of tar obtained from heavy fraction of bio-oil at different heating rates
- (2020) Zejun Luo et al. JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS
- High-performance fiberglass/epoxy reinforced by functionalized CNTs for vehicle applications with less fuel consumption and greenhouse gas emissions
- (2020) Sharath P. Subadra et al. POLYMER TESTING
- A new industrial technology for closing the loop of full-size waste motherboards using chemical-ultrasonic-mechanical treatment
- (2020) Samy Yousef et al. PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
- Modeling of Metalized Food Packaging Plastics Pyrolysis Kinetics Using an Independent Parallel Reactions Kinetic Model
- (2020) Samy Yousef et al. Polymers
- Conversion of end-of-life cotton banknotes into liquid fuel using mini-pyrolysis plant
- (2020) Samy Yousef et al. JOURNAL OF CLEANER PRODUCTION
- Superhydrophilic functionalized graphene/fiberglass/epoxy laminates with high mechanical, impact and thermal performance and treated by plasma
- (2020) Samy Yousef et al. POLYMER TESTING
- Low velocity impact and pseudo-ductile behaviour of carbon/glass/epoxy and carbon/glass/PMMA hybrid composite laminates for aircraft application at service temperature
- (2020) Sharath P. Subadra et al. POLYMER TESTING
- Structural validation of a thermoplastic composite wind turbine blade with comparison to a thermoset composite blade
- (2020) Robynne E. Murray et al. RENEWABLE ENERGY
- A new strategy for using Lint-Microfibers Generated from Clothes Dryer as a sustainable source of renewable energy
- (2020) Samy Yousef et al. SCIENCE OF THE TOTAL ENVIRONMENT
- In-house recycling of carbon- and glass fibre-reinforced thermoplastic composite laminate waste into high-performance sheet materials
- (2020) Peter Kiss et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Investigation of the interphase mechanisms and welding behaviour of fast-curing epoxy based composites with co-cured thermoplastic boundary layers
- (2020) Lucian Zweifel et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Pyrolysis kinetic behavior and TG-FTIR-GC–MS analysis of metallised food packaging plastics
- (2020) Samy Yousef et al. FUEL
- Pyrolysis Kinetic Study and Reaction Mechanism of Epoxy Glass Fiber Reinforced Plastic by Thermogravimetric Analyzer (TG) and TG–FTIR (Fourier-Transform Infrared) Techniques
- (2020) Yuanhua Qiao et al. Polymers
- Real time material flow monitoring in mechanical waste processing and the relevance of fluctuations
- (2020) A. Curtis et al. WASTE MANAGEMENT
- CO2/CH4, CO2/N2 and CO2/H2 selectivity performance of PES membranes under high pressure and temperature for biogas upgrading systems
- (2020) Samy Yousef et al. Environmental Technology & Innovation
- Three-Dimensional Nano-Morphology of Carbon Nanotube/Epoxy Filled Poly(methyl methacrylate) Microcapsules
- (2019) M. Galip Icduygu et al. Materials
- Seismic performance of recycled aggregate concrete-filled glass fibre-reinforced polymer-steel composite tube columns
- (2019) Shu Fang et al. CONSTRUCTION AND BUILDING MATERIALS
- Multifunctional epoxy/carbon fiber laminates for thermal energy storage and release
- (2018) Giulia Fredi et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Separation and purification of metal and fiberglass extracted from waste printed circuit boards using milling and dissolution techniques
- (2018) Maksym Tatariants et al. Environmental Progress & Sustainable Energy
- Improvement of pyrolysis oil obtained from co-pyrolysis of WPCBs and compound additive during two stage pyrolysis
- (2018) Ziwei Ye et al. JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS
- Recycling of bare waste printed circuit boards as received using an organic solvent technique at a low temperature
- (2018) Samy Yousef et al. JOURNAL OF CLEANER PRODUCTION
- A strategy for synthesis of copper nanoparticles from recovered metal of waste printed circuit boards
- (2018) Samy Yousef et al. JOURNAL OF CLEANER PRODUCTION
- Recovery of gold, other metallic and non-metallic components of full-size waste random access memory
- (2018) Maksym Tatariants et al. JOURNAL OF CLEANER PRODUCTION
- Glass fiber-reinforced epoxy composite with surface-modified graphene oxide: enhancement of interlaminar fracture toughness and thermo-mechanical performance
- (2018) Alireza Ashori et al. POLYMER BULLETIN
- A critical review on recycling of end-of-life carbon fibre/glass fibre reinforced composites waste using pyrolysis towards a circular economy
- (2018) S.R. Naqvi et al. RESOURCES CONSERVATION AND RECYCLING
- Antimicrobial copper nanoparticles synthesized from waste printed circuit boards using advanced chemical technology
- (2018) Maksym Tatariants et al. WASTE MANAGEMENT
- Wind turbine blade recycling: Experiences, challenges and possibilities in a circular economy
- (2018) J.P. Jensen et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Mechanical and thermal properties of carbon nanotube- and graphene-glass fiber fabric-reinforced epoxy composites: A comparative study
- (2018) Shaohua Zeng et al. TEXTILE RESEARCH JOURNAL
- Tribological Behavior of Nanocomposites Based on UHMWPE Aged in Simulated Synovial Fluid
- (2018) Annamaria Visco et al. Polymers
- Effects of heating rate on fast pyrolysis behavior and product distribution of Jerusalem artichoke stalk by using TG-FTIR and Py-GC/MS
- (2018) Bo Wang et al. RENEWABLE ENERGY
- Mechanical and thermal characterizations of non-metallic components recycled from waste printed circuit boards
- (2017) Samy Yousef et al. JOURNAL OF CLEANER PRODUCTION
- Characterization of waste printed circuit boards recycled using a dissolution approach and ultrasonic treatment at low temperatures
- (2017) Maksym Tatariants et al. RSC Advances
- Thermo-chemical behavior and product formation during pyrolysis of mango seed shell
- (2016) L.A. Andrade et al. INDUSTRIAL CROPS AND PRODUCTS
- Energy demand in mechanical recycling of glass fibre reinforced thermoset plastic composites
- (2016) Norshah Aizat Shuaib et al. JOURNAL OF CLEANER PRODUCTION
- Pyrolysis characteristics of glass fiber-reinforced plastic (GFRP) under isothermal conditions
- (2015) Young Min Yun et al. JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS
- Pyrolysis characteristics of GFRP (Glass Fiber Reinforced Plastic) under non-isothermal conditions
- (2014) Young Min Yun et al. FUEL
- An overview of mechanical properties and durability of glass-fibre reinforced recycled mixed plastic waste composites
- (2014) Rohan Muni Bajracharya et al. MATERIALS & DESIGN
- Recycling of fiber-reinforced composites and direct structural composite recycling concept
- (2013) Eylem Asmatulu et al. JOURNAL OF COMPOSITE MATERIALS
- Chemical recycling of glass fibre reinforced composites using subcritical water
- (2012) Géraldine Oliveux et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Date palm wood flour/glass fibre reinforced hybrid composites of recycled polypropylene: Mechanical and thermal properties
- (2012) Mariam A. AlMaadeed et al. MATERIALS & DESIGN
- A new iterative linear integral isoconversional method for the determination of the activation energy varying with the conversion degree
- (2009) Junmeng Cai et al. JOURNAL OF COMPUTATIONAL CHEMISTRY
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now