标题
Nanoprecipitate‐Strengthened High‐Entropy Alloys
作者
关键词
-
出版物
Advanced Science
Volume 8, Issue 23, Pages 2100870
出版商
Wiley
发表日期
2021-10-22
DOI
10.1002/advs.202100870
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Investigation of sluggish diffusion in FCC Al0.25CoCrFeNi high-entropy alloy
- (2021) Abhishek Mehta et al. Materials Research Letters
- Novel Co-Cu-Based Immiscible Medium-Entropy Alloys with Promising Mechanical Properties
- (2021) Sujung Son et al. Metals
- Bifunctional nanoprecipitates strengthen and ductilize a medium-entropy alloy
- (2021) Ying Yang et al. NATURE
- High-throughput design of high-performance lightweight high-entropy alloys
- (2021) Rui Feng et al. Nature Communications
- Control of nanoscale precipitation and elimination of intermediate-temperature embrittlement in multicomponent high-entropy alloys
- (2020) T. Yang et al. ACTA MATERIALIA
- Mechanical properties and deformation mechanisms of a novel austenite-martensite dual phase steel
- (2020) S.S. Xu et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A new strategy of tailoring strength and ductility of CoCrFeNi based high-entropy alloy
- (2020) Fukai Zheng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Achieving ultrahigh strength in CoCrNi-based medium-entropy alloys with synergistic strengthening effect
- (2020) Xingshuo Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Tensile properties and bake hardening response of dual phase steels with varied martensite volume fraction
- (2020) Mohamed Soliman et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Nano-precipitates strengthened non-equiatomic medium-entropy alloy with outstanding tensile properties
- (2020) Wenjie Lu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Nanoscale precipitates as sustainable dislocation sources for enhanced ductility and high strength
- (2020) Shenyou Peng et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- High-entropy ceramics
- (2020) Corey Oses et al. Nature Reviews Materials
- Superior high-temperature properties and deformation-induced planar faults in a novel L12-strengthened high-entropy alloy
- (2020) Y.L. Zhao et al. ACTA MATERIALIA
- Consideration of kinetics on intermetallics formation in solid-solution high entropy alloys
- (2020) T.H. Chou et al. ACTA MATERIALIA
- Nanophase precipitation and strengthening in a dual-phase Al0.5CoCrFeNi high-entropy alloy
- (2020) Haoxue Yang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Cold deformation mechanism of cobalt-base superalloy GH5605
- (2020) Chao Liu et al. MATERIALS LETTERS
- Interstitial doping enhances the strength-ductility synergy in a CoCrNi medium entropy alloy
- (2020) Igor Moravcik et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Short-range order and its impact on the CrCoNi medium-entropy alloy
- (2020) Ruopeng Zhang et al. NATURE
- Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy
- (2020) X. H. Du et al. Nature Communications
- Heterogeneous precipitation mediated heterogeneous nanostructure enhances strength-ductility synergy in severely cryo-rolled and annealed CoCrFeNi2.1Nb0.2 high entropy alloy
- (2020) U. Sunkari et al. Scientific Reports
- Chemical boundary engineering: A new route toward lean, ultrastrong yet ductile steels
- (2020) Ran Ding et al. Science Advances
- Irradiation damage in (Zr0.25Ta0.25Nb0.25Ti0.25)C high-entropy carbide ceramics
- (2020) Fei Wang et al. ACTA MATERIALIA
- A new strategy for designing immiscible medium-entropy alloys with excellent tensile properties
- (2020) Jongun Moon et al. ACTA MATERIALIA
- A ductile high entropy alloy strengthened by nano sigma phase
- (2020) Lu Zhang et al. INTERMETALLICS
- Control of discontinuous and continuous precipitation of γʹ-strengthened high-entropy alloys through nanoscale Nb segregation and partitioning
- (2020) L. Fan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Co-free non-equilibrium medium-entropy alloy with outstanding tensile properties
- (2020) Wenjie Lu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Engineering multi-scale B2 precipitation in a heterogeneous FCC based microstructure to enhance the mechanical properties of a Al0.5Co1.5CrFeNi1.5 high entropy alloy
- (2020) S. Dasari et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Tailoring microstructures and tensile properties of a precipitation-strengthened (FeCoNi)94Ti6 medium-entropy alloy
- (2020) Y. Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Diffusional and displacive transformations in interstitial-free steel within the scope of a critical assessment of the mechanical property
- (2020) M. Sinha et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High-temperature age-hardening of a novel cost-effective Fe45Ni25Cr25Mo5 high entropy alloy
- (2020) Yu Yin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Interstitial carbide synergistically strengthening high-entropy alloy CoCrFeNiV0.5C
- (2020) Yimo Ma et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Ultrahigh strength and ductility in newly developed materials with coherent nanolamellar architectures
- (2020) Lei Fan et al. Nature Communications
- Mechanisms for suppressing discontinuous precipitation and improving mechanical properties of NiAl-strengthened steels through nanoscale Cu partitioning
- (2020) B.C. Zhou et al. ACTA MATERIALIA
- Heterogenous columnar-grained high-entropy alloys produce exceptional resistance to intermediate-temperature intergranular embrittlement
- (2020) B.X. Cao et al. SCRIPTA MATERIALIA
- Outstanding radiation resistance of tungsten-based high-entropy alloys
- (2019) O. El-Atwani et al. Science Advances
- Room temperature tensile behaviour of K640S Co-based superalloy
- (2019) Guichen Hou et al. MATERIALS SCIENCE AND TECHNOLOGY
- Effect of second phase particles on mechanical properties and grain growth in a CoCrFeMnNi high entropy alloy
- (2019) M.V. Klimova et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Precipitation behaviour and mechanical properties of a new wrought high entropy superalloy
- (2019) Ahad Shafiee et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of carbon on the microstructures and mechanical properties of FeCoCrNiMn high entropy alloys
- (2019) Lin Guo et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Exploring the relationship between the microstructure and strength of fresh and tempered martensite in a maraging stainless steel Fe–15Cr–5Ni
- (2019) Tao Zhou et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Cryogenic behaviour of the Al5Ti5Co35Ni35Fe20 multi-principal component alloy
- (2019) K. Górecki et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Design of D022 superlattice with superior strengthening effect in high entropy alloys
- (2019) Feng He et al. ACTA MATERIALIA
- Nanoparticles-strengthened high-entropy alloys for cryogenic applications showing an exceptional strength-ductility synergy
- (2019) T. Yang et al. SCRIPTA MATERIALIA
- Novel Co-rich high performance twinning-induced plasticity (TWIP) and transformation-induced plasticity (TRIP) high-entropy alloys
- (2019) Daixiu Wei et al. SCRIPTA MATERIALIA
- Dense high-entropy boride ceramics with ultra-high hardness
- (2019) Yan Zhang et al. SCRIPTA MATERIALIA
- Synergistic effect of Ti and Al on L12-phase design in CoCrFeNi-based high entropy alloys
- (2019) Da Chen et al. INTERMETALLICS
- Strengthening of a CrMnFeCoNi high-entropy alloy by carbide precipitation
- (2019) N. Gao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of ordered L12 precipitation on strain-rate dependent mechanical behavior in a eutectic high entropy alloy
- (2019) Bharat Gwalani et al. Scientific Reports
- High-entropy alloys
- (2019) Easo P. George et al. Nature Reviews Materials
- Experimental and numerical study of mechanical properties of multi-phase medium-Mn TWIP-TRIP steel: Influences of strain rate and phase constituents
- (2019) J.T. Benzing et al. ACTA MATERIALIA
- Carbide precipitation strengthening in fine-grained carbon-doped FeCoCrNiMn high entropy alloy
- (2019) Jian Peng et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Precipitation behavior and its impact on mechanical properties in an aged carbon-containing Al0.3Cu0.5CrFeNi2 high-entropy alloy
- (2019) Kai Zhang et al. MATERIALS CHARACTERIZATION
- Coherent precipitation and strengthening in a dual-phase AlNi2Co2Fe1.5Cr1.5 high-entropy alloy
- (2019) Yue Ma et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Precipitate evolution and strengthening behavior during aging process in a 2.5 GPa grade maraging steel
- (2019) Mengchao Niu et al. ACTA MATERIALIA
- Microstructural evolution and mechanical properties of Al0.3CoCrFeNiSix high-entropy alloys containing coherent nanometer-scaled precipitates
- (2019) Peng Cheng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways
- (2019) Qing-Jie Li et al. Nature Communications
- Irradiation induced creep in nanocrystalline high entropy alloys
- (2019) Gowtham Sriram Jawaharram et al. ACTA MATERIALIA
- Short communication: ‘Low activation, refractory, high entropy alloys for nuclear applications’
- (2019) A. Kareer et al. JOURNAL OF NUCLEAR MATERIALS
- The strengthening and toughening mechanism of dual martensite in quenching-partitioning steels
- (2019) Jian Wu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Tuning nanostructure using thermo-mechanical processing for enhancing mechanical properties of complex intermetallic containing CoCrFeNi2.1Nbx high entropy alloys
- (2019) U. Sunkari et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Nano-sized Cu clusters in deeply undercooled CoCuFeNiTa high entropy alloy
- (2019) M.R. Rahul et al. SCRIPTA MATERIALIA
- Effect of deformation induced B2 precipitates on the microstructure and mechanical property of Al0.3CoCrFeNi high-entropy alloy
- (2019) Wandong Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Phase stability and transformation in a light-weight high-entropy alloy
- (2018) Rui Feng et al. ACTA MATERIALIA
- Combined strengthening from nanotwins and nanoprecipitates in an iron-based superalloy
- (2018) B.B. Zhang et al. ACTA MATERIALIA
- Thermal stability and coarsening of coherent particles in a precipitation-hardened (NiCoFeCr) 94 Ti 2 Al 4 high-entropy alloy
- (2018) Y.Y. Zhao et al. ACTA MATERIALIA
- Controlled formation of coherent cuboidal nanoprecipitates in body-centered cubic high-entropy alloys based on Al 2 (Ni,Co,Fe,Cr) 14 compositions
- (2018) Y. Ma et al. ACTA MATERIALIA
- Bulk tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys
- (2018) M. Vaidya et al. ACTA MATERIALIA
- Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution
- (2018) Hong Luo et al. CORROSION SCIENCE
- Realizing strength-ductility combination of coarse-grained Al 0.2 Co 1.5 CrFeNi 1.5 Ti 0.3 alloy via nano-sized, coherent precipitates
- (2018) Kaisheng Ming et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Microstructural evolution and mechanical performance of carbon-containing CoCrFeMnNi-C high entropy alloys
- (2018) Jun Yeong Ko et al. JOURNAL OF ALLOYS AND COMPOUNDS
- High temperature deformation behavior of carbon-containing FeCoCrNiMn high entropy alloy
- (2018) Jianbo Li et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Martensite transformation behavior and mechanical properties of cold-rolled metastable Cr-Mn-Ni-N austenitic stainless steels
- (2018) Yichong Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Heavy carbon alloyed FCC-structured high entropy alloy with excellent combination of strength and ductility
- (2018) L.B. Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Role of brittle sigma phase in cryogenic-temperature-strength improvement of non-equi-atomic Fe-rich VCrMnFeCoNi high entropy alloys
- (2018) Yong Hee Jo et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Composition evolution of gamma prime nanoparticles in the Ti-doped CoFeCrNi high entropy alloy
- (2018) Bin Han et al. SCRIPTA MATERIALIA
- Development of high-strength Co-free high-entropy alloys hardened by nanosized precipitates
- (2018) Y.L. Zhao et al. SCRIPTA MATERIALIA
- Influence of compositional complexity on interdiffusion in Ni-containing concentrated solid-solution alloys
- (2018) Ke Jin et al. Materials Research Letters
- Lattice distortion in a strong and ductile refractory high-entropy alloy
- (2018) Chanho Lee et al. ACTA MATERIALIA
- Nanoscale precipitation and its influence on strengthening mechanisms in an ultra-high strength low-carbon steel
- (2018) S.S. Xu et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Electronic transport and phonon properties of maximally disordered alloys: From binaries to high-entropy alloys
- (2018) Sai Mu et al. JOURNAL OF MATERIALS RESEARCH
- Irradiation effects in high entropy alloys and 316H stainless steel at 300 °C
- (2018) Wei-Ying Chen et al. JOURNAL OF NUCLEAR MATERIALS
- Effect of reverse austenitic transformation on mechanical property and associated texture evolution in AISI 316 austenitic stainless steel processed by low temperature rolling and annealing
- (2018) Soham Chattopadhyay et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys
- (2018) Jun Ding et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys
- (2018) Yao-Jian Liang et al. Nature Communications
- On Lattice Distortion in High Entropy Alloys
- (2018) Quanfeng He et al. Frontiers in Materials
- Texture, orientation, and mechanical properties of Ti-stabilized Fe-17Cr ferritic stainless steel
- (2018) Junwei Fu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of boron addition on microstructure and tensile properties of copper modified ultra high strength NiSiCrCoMo steel
- (2018) Bidyapati Mishra et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Study of precipitation-assisted stress relaxation and creep behavior during the ageing of a nickel-iron superalloy
- (2018) Hailong Qin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
- (2018) Zhifeng Lei et al. NATURE
- Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys
- (2018) Zezhou Li et al. PROGRESS IN MATERIALS SCIENCE
- Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
- (2018) T. Yang et al. SCIENCE
- A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength
- (2018) Zhiqiang Fu et al. Science Advances
- Back stress strengthening dual-phase AlCoCr2FeNi2 high entropy alloy with outstanding tensile properties
- (2018) Xi Jin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Strength and ductility of CrFeCoNiMo alloy with hierarchical microstructures
- (2018) Kaisheng Ming et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0.2 high-entropy alloy at room and cryogenic temperatures
- (2018) Y. Tong et al. ACTA MATERIALIA
- Cu addition effects on TRIP to TWIP transition and tensile property improvement of ultra-high-strength austenitic high-Mn steels
- (2018) Jin Hyeok Choi et al. ACTA MATERIALIA
- Effect of μ-precipitates on the microstructure and mechanical properties of non-equiatomic CoCrFeNiMo medium-entropy alloys
- (2018) Jae Wung Bae et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Novel Fe 36 Mn 21 Cr 18 Ni 15 Al 10 high entropy alloy with bcc/B2 dual-phase structure
- (2017) D.G. Shaysultanov et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Direct versus indirect particle strengthening in a strong, ductile FeNiMnAlTi high entropy alloy
- (2017) Zhangwei Wang et al. MATERIALS CHARACTERIZATION
- Cryogenic rolling-enhanced mechanical properties and microstructural evolution of 5052 Al-Mg alloy
- (2017) Jintao Shi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of coherent L1 2 nanoprecipitates on the tensile behavior of a fcc-based high-entropy alloy
- (2017) Z.G. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Comparison of the hot-stamped boron-alloyed steel and the warm-stamped medium-Mn steel on microstructure and mechanical properties
- (2017) Xiaodong Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
- (2017) Suihe Jiang et al. NATURE
- High dislocation density–induced large ductility in deformed and partitioned steels
- (2017) B. B. He et al. SCIENCE
- The effect of Ti on precipitation of fully coherent DO 22 superlattice in an Ni-Cr-W-based superalloy
- (2017) Xiangyu Gao et al. SCRIPTA MATERIALIA
- Determination of the intrinsic diffusivities from the diffusion couple experiment in multicomponent systems
- (2017) Marek Zajusz et al. SCRIPTA MATERIALIA
- Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing
- (2017) Yen-Ling Kuo et al. SCRIPTA MATERIALIA
- Deformation and fracture mechanisms of nanotwinned metals
- (2017) Zesheng You et al. National Science Review
- Mechanical properties of copper/bronze laminates: Role of interfaces
- (2016) Xiaolong Ma et al. ACTA MATERIALIA
- Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co 25 Ni 25 Fe 25 Al 7.5 Cu 17.5 high-entropy alloy
- (2016) Zhiqiang Fu et al. ACTA MATERIALIA
- Diffusion of solutes in fcc Cobalt investigated by diffusion couples and first principles kinetic Monte Carlo
- (2016) S. Neumeier et al. ACTA MATERIALIA
- A precipitation-hardened high-entropy alloy with outstanding tensile properties
- (2016) J.Y. He et al. ACTA MATERIALIA
- Ductile CoCrFeNiMo x high entropy alloys strengthened by hard intermetallic phases
- (2016) W.H. Liu et al. ACTA MATERIALIA
- Design of Light-Weight High-Entropy Alloys
- (2016) Rui Feng et al. Entropy
- Effect of Ti content on the microstructure and mechanical behavior of (Fe 36 Ni 18 Mn 33 Al 13 ) 100−x Ti x high entropy alloys
- (2016) Zhangwei Wang et al. INTERMETALLICS
- Interdiffusion in the FCC-structured Al-Co-Cr-Fe-Ni high entropy alloys: Experimental studies and numerical simulations
- (2016) Juliusz Dąbrowa et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Recrystallization of a novel two-phase FeNiMnAlCr high entropy alloy
- (2016) Ian Baker et al. JOURNAL OF ALLOYS AND COMPOUNDS
- High-entropy alloy: challenges and prospects
- (2016) Y.F. Ye et al. Materials Today
- Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
- (2016) Zhiming Li et al. NATURE
- A cuboidal B2 nanoprecipitation-enhanced body-centered-cubic alloy Al 0.7 CoCrFe 2 Ni with prominent tensile properties
- (2016) Qing Wang et al. SCRIPTA MATERIALIA
- A low-cost hierarchical nanostructured beta-titanium alloy with high strength
- (2016) Arun Devaraj et al. Nature Communications
- Ab initio thermodynamics of the CoCrFeMnNi high entropy alloy: Importance of entropy contributions beyond the configurational one
- (2015) Duancheng Ma et al. ACTA MATERIALIA
- Precipitation mechanism and mechanical properties of an ultra-high strength steel hardened by nanoscale NiAl and Cu particles
- (2015) Z.B. Jiao et al. ACTA MATERIALIA
- Phase stability of non-equiatomic CoCrFeMnNi high entropy alloys
- (2015) Duancheng Ma et al. ACTA MATERIALIA
- Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation
- (2015) B. Schuh et al. ACTA MATERIALIA
- Effects of Nb additions on the microstructure and mechanical property of CoCrFeNi high-entropy alloys
- (2015) W.H. Liu et al. INTERMETALLICS
- Nano-twin mediated plasticity in carbon-containing FeNiCoCrMn high entropy alloys
- (2015) Z. Wu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Irradiation Behavior in High Entropy Alloys
- (2015) Song-qin XIA et al. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
- High-Entropy Alloys in Hexagonal Close-Packed Structure
- (2015) M. C. Gao et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Brittle intermetallic compound makes ultrastrong low-density steel with large ductility
- (2015) Sang-Heon Kim et al. NATURE
- Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles
- (2015) Lian-Yi Chen et al. NATURE
- A high-specific-strength and corrosion-resistant magnesium alloy
- (2015) Wanqiang Xu et al. NATURE MATERIALS
- Investigations of quaternary interdiffusion in a constituent system of high entropy alloys
- (2015) Kaustubh Kulkarni et al. AIP Advances
- Microstructural features and tensile behaviors of the Al 0.5 CrCuFeNi 2 high-entropy alloys by cold rolling and subsequent annealing
- (2015) S.G. Ma et al. MATERIALS & DESIGN
- Multicomponent and High Entropy Alloys
- (2014) Brian Cantor Entropy
- Steady state flow of the FeCoNiCrMn high entropy alloy at elevated temperatures
- (2014) J.Y. He et al. INTERMETALLICS
- Recrystallization Behavior of CoCrCuFeNi High-Entropy Alloy
- (2014) Nokeun Park et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Making strong nanomaterials ductile with gradients
- (2014) K. Lu SCIENCE
- A fracture-resistant high-entropy alloy for cryogenic applications
- (2014) B. Gludovatz et al. SCIENCE
- Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins
- (2014) Yujie Wei et al. Nature Communications
- High-Entropy Alloys: A Critical Review
- (2014) Ming-Hung Tsai et al. Materials Research Letters
- Hexagonal High-entropy Alloys
- (2014) Michael Feuerbacher et al. Materials Research Letters
- Ostwald ripening in multicomponent alloys
- (2013) T. Philippe et al. ACTA MATERIALIA
- Strengthening mechanisms in a high-strength bulk nanostructured Cu–Zn–Al alloy processed via cryomilling and spark plasma sintering
- (2013) Haiming Wen et al. ACTA MATERIALIA
- The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
- (2013) F. Otto et al. ACTA MATERIALIA
- Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys
- (2013) K.-Y. Tsai et al. ACTA MATERIALIA
- Synergistic effects of Cu and Ni on nanoscale precipitation and mechanical properties of high-strength steels
- (2013) Z.B. Jiao et al. ACTA MATERIALIA
- Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
- (2013) Kaka Ma et al. ACTA MATERIALIA
- Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system
- (2013) J.Y. He et al. ACTA MATERIALIA
- Tensile properties of high- and medium-entropy alloys
- (2013) A. Gali et al. INTERMETALLICS
- Annealing effects on the microstructure and properties of bulk high-entropy CoCrFeNiTi0.5 alloy casting ingot
- (2013) Li Jiang et al. INTERMETALLICS
- Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy
- (2013) P.P. Bhattacharjee et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Age-hardening of the CoCrFeNiMo0.85 high-entropy alloy
- (2013) Tao-Tsung Shun et al. MATERIALS CHARACTERIZATION
- Microstructures and properties of high-entropy alloys
- (2013) Yong Zhang et al. PROGRESS IN MATERIALS SCIENCE
- Influence of carbon content on the microstructure, martensitic transformation and mechanical properties in austenite/ε-martensite dual-phase Fe–Mn–C steels
- (2012) Jae-Bok Seol et al. ACTA MATERIALIA
- Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys
- (2012) Woei-Ren Wang et al. INTERMETALLICS
- Morphology, structure and composition of precipitates in Al0.3CoCrCu0.5FeNi high-entropy alloy
- (2012) Ming-Hung Tsai et al. INTERMETALLICS
- Significant hardening due to the formation of a sigma phase matrix in a high entropy alloy
- (2012) Ming-Hung Tsai et al. INTERMETALLICS
- Microstructure, crystallographic texture and mechanical properties of the magnesium alloy AZ31B after different routes of thermo-mechanical processing
- (2012) Sebastian Seipp et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Dry sliding wear behavior of laser clad TiVCrAlSi high entropy alloy coatings on Ti–6Al–4V substrate
- (2012) Can Huang et al. MATERIALS & DESIGN
- Prediction of high-entropy stabilized solid-solution in multi-component alloys
- (2012) X. Yang et al. MATERIALS CHEMISTRY AND PHYSICS
- Strengthening austenitic steels by using nanotwinned austenitic grains
- (2012) K. Lu et al. SCRIPTA MATERIALIA
- Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy
- (2012) W.H. Liu et al. SCRIPTA MATERIALIA
- Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles
- (2011) F.K. Yan et al. ACTA MATERIALIA
- Aging behavior of a CuCr2Fe2NiMn high-entropy alloy
- (2011) B. Ren et al. MATERIALS & DESIGN
- Effect of annealing treatment on microstructure and properties of high-entropy FeCoNiCrCu0.5 alloy
- (2011) Chun-Ming Lin et al. MATERIALS CHEMISTRY AND PHYSICS
- Annealing behaviour and mechanical properties of severely deformed interstitial free steel
- (2011) Azdiar A. Gazder et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Nb addition on the microstructure and properties of AlCoCrFeNi high-entropy alloy
- (2011) S.G. Ma et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The conflicts between strength and toughness
- (2011) Robert O. Ritchie NATURE MATERIALS
- The effect of molybdenum on the corrosion behaviour of the high-entropy alloys Co1.5CrFeNi1.5Ti0.5Mox in aqueous environments
- (2010) Y.L. Chou et al. CORROSION SCIENCE
- Effect of elemental interaction on microstructure of CuCrFeNiMn high entropy alloy system
- (2010) B. Ren et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Nanostructural hierarchy increases the strength of aluminium alloys
- (2010) Peter V. Liddicoat et al. Nature Communications
- Annealing on the structure and properties evolution of the CoCrFeNiCuAl high-entropy alloy
- (2009) K.B. Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale
- (2009) K. Lu et al. SCIENCE
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search