Pin Angle Thermal Effects on Friction Stir Welding of AA5058 Aluminum Alloy: CFD Simulation and Experimental Validation
出版年份 2021 全文链接
标题
Pin Angle Thermal Effects on Friction Stir Welding of AA5058 Aluminum Alloy: CFD Simulation and Experimental Validation
作者
关键词
-
出版物
Materials
Volume 14, Issue 24, Pages 7565
出版商
MDPI AG
发表日期
2021-12-10
DOI
10.3390/ma14247565
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Friction Spot Extrusion Welding on Dissimilar Materials AA2024-T3 to AA5754-O: Effect of Shoulder Plunge Depth
- (2021) S. Memon et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Numerical Simulation for the Optimization of Polygonal Pin Profiles in Friction Stir Welding of Aluminum
- (2021) Hao Su et al. Acta Metallurgica Sinica-English Letters
- Influence of Tool Geometry and Process Parameters on the Properties of Friction Stir Spot Welded Multiple (AA 5754 H111) Aluminium Sheets
- (2021) Danka Labus Zlatanovic et al. Materials
- Effects of materials positioning and tool rotational speed on metallurgical and mechanical properties of dissimilar modified friction stir clinching of AA5754-O and AA2024-T3 sheets
- (2021) S. Memon et al. Results in Physics
- Dissimilar welding of AA5083 to AZ31 Mg alloys using Modified friction stir clinching brazing
- (2021) M. Paidar et al. MATERIALS LETTERS
- Modified Friction Stir Clinching of AA5754-O to AA6061-T6: The role of shoulder feature on the metallurgical and mechanical properties
- (2021) K.S. Ashraff Ali et al. VACUUM
- Underwater friction stir welding of PC: Experimental study and thermo-mechanical modelling
- (2021) Hamed Aghajani Derazkola et al. Journal of Manufacturing Processes
- Effects of friction stir welding tool tilt angle on properties of Al-Mg-Si alloy T-joint
- (2021) Hesamoddin Aghajani Derazkola et al. CIRP Journal of Manufacturing Science and Technology
- The effect of tool pin size and taper angle on the thermal process and plastic material flow in friction stir welding
- (2021) Jie Chen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of FSW Tool Plunge Depth on Properties of an Al-Mg-Si Alloy T-Joint: Thermomechanical Modeling and Experimental Evaluation
- (2021) Shabbir Memon et al. Materials
- Analysis of Friction Stir Welding Tool Offset on the Bonding and Properties of Al–Mg–Si Alloy T-Joints
- (2021) Shabbir Memon et al. Materials
- Shoulder Related Temperature Thresholds in FSSW of Aluminium Alloys
- (2021) David G. Andrade et al. Materials
- Thermo-Mechanical Simulation of Underwater Friction Stir Welding of Low Carbon Steel
- (2021) Shabbir Memon et al. Materials
- Influence of tool pin profiles on the filler added friction stir spot welded dissimilar aluminium alloy joints
- (2021) Balamurugan M et al. Materials Research Express
- Internal Flow Behaviour and Microstructural Evolution of the Bobbin-FSW Welds: Thermomechanical Comparison between 1xxx and 3xxx Aluminium Grades
- (2021) Abbas Tamadon et al. Advances in Materials Science
- UFSW tool pin profile effects on properties of aluminium-steel joint
- (2021) Xinli Xu et al. VACUUM
- Investigation of Mechanical and Microstructural Properties of Welded Specimens of AA6061-T6 Alloy with Friction Stir Welding and Parallel-Friction Stir Welding Methods
- (2021) Amir Ghiasvand et al. Materials
- Submerged Dissimilar Friction Stir Welding of AA6061 and AA7075 Aluminum Alloys: Microstructure Characterization and Mechanical Property
- (2021) Akbar Heidarzadeh et al. Metals
- Effect of tilt angle in FSW of polycarbonate sheets in butt configuration
- (2020) F. Lambiase et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Simulation and experimental study of underwater dissimilar friction-stir welding between aluminium and steel
- (2020) Arameh Eyvazian et al. Journal of Materials Research and Technology-JMR&T
- EBSD study of underwater friction stir welded AA7003-T4 and AA6060-T4 dissimilar joint
- (2020) Jialiang Dong et al. Journal of Materials Research and Technology-JMR&T
- Friction Stir Welding and Friction Spot Stir Welding Processes of Polymers—State of the Art
- (2020) Francesco Lambiase et al. Materials
- Microstructure and Low Cycle Fatigue Properties of AA5083 H111 Friction Stir Welded Joint
- (2020) Janusz Torzewski et al. Materials
- Monte Carlo simulation of grain refinement during friction stir processing
- (2020) F. Khodabakhshi et al. JOURNAL OF MATERIALS SCIENCE
- Peak Temperature Correlation and Temperature Distribution during Joining of AZ80A Mg Alloy by FSW – A Numerical and Experimental Investigation
- (2020) p Sevvel et al. STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING
- CFD Modelling of Temperature Distribution and Material Flow Investigation During FSW of DH36 Shipbuilding Grade Steel
- (2020) Avinish Tiwari et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Strengthening mechanism of friction stir welded alpha titanium alloy specially designed T-joints
- (2020) Yu Su et al. Journal of Manufacturing Processes
- Development of fed friction-stir (FFS) process for dissimilar nanocomposite welding between AA2024 aluminum alloy and polycarbonate (PC)
- (2020) Hamed Aghajani Derazkola et al. Journal of Manufacturing Processes
- Evaluation of a polymer-steel laminated sheet composite structure produced by friction stir additive manufacturing (FSAM) technology
- (2020) H. Aghajani Derazkola et al. POLYMER TESTING
- Fabrication of a nanostructured high strength steel tube by friction-forging tubular additive manufacturing (FFTAM) technology
- (2020) H. Aghajani Derazkola et al. Journal of Manufacturing Processes
- Processing and characterizations of polycarbonate/alumina nanocomposites by additive powder fed friction stir processing
- (2020) Hamed Aghajani Derazkola et al. THIN-WALLED STRUCTURES
- Heat Input and Mechanical Properties Investigation of Friction Stir Welded AA5083/AA5754 and AA5083/AA7020
- (2020) Mohamed M. Z. Ahmed et al. Metals
- Friction spot extrusion welding-brazing of copper to aluminum alloy
- (2020) M. Paidar et al. MATERIALS LETTERS
- Underwater friction stir welding of Al-Mg alloy: Thermo-mechanical modeling and validation
- (2020) Pouyan Talebizadehsardari et al. Materials Today Communications
- Weldability of AA6061-T6 and AISI 304 by underwater friction stir welding
- (2019) Raju P. Mahto et al. Journal of Manufacturing Processes
- Underwater submerged dissimilar friction-stir welding of AA5083 aluminum alloy and A441 AISI steel
- (2019) Hamed Aghajani Derazkola et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A novel fed friction-stir (FFS) technology for nanocomposite joining
- (2019) Hamed Aghajani Derazkola et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effect of tool tilt angle on strength and microstructural characteristics of friction stir welded lap joints of AA2014-T6 aluminum alloy
- (2019) C. RAJENDRAN et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Fully coupled thermomechanical simulation of friction stir welding of aluminum 6061-T6 alloy T-joint
- (2019) Kareem N. Salloomi Journal of Manufacturing Processes
- A Weighting Grade-Based Optimization Method for Determining Refill Friction Stir Spot Welding Process Parameters
- (2019) Rafał Kluz et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Friction stir welding of polycarbonate lap joints: Relationship between processing parameters and mechanical properties
- (2019) Hamed Aghajani Derazkola et al. POLYMER TESTING
- Study on the effects of tool tile angle, offset and plunge depth on friction stir welding of poly(methyl methacrylate) T-joint
- (2019) Arameh Eyvazian et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- A new procedure for the fabrication of dissimilar joints through injection of colloidal nanoparticles during friction stir processing: Proof concept for AA6062/PMMA joints
- (2019) Hamed Aghajani Derazkola et al. Journal of Manufacturing Processes
- Submerged friction stir welding of dissimilar joints between an Al-Mg alloy and low carbon steel: Thermo-mechanical modeling, microstructural features, and mechanical properties
- (2019) Hamed Aghajani Derazkola et al. Journal of Manufacturing Processes
- Modeling and experimental validation of material flow during FSW of polycarbonate
- (2019) Hamed Aghajani Derazkola et al. Materials Today Communications
- Experimental and thermomechanical study on FSW of PMMA polymer T-joint
- (2018) Majid Elyasi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties
- (2018) Mohd. Atif WAHID et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Experimental and thermomechanical analysis of the effect of tool pin profile on the friction stir welding of poly(methyl methacrylate) sheets
- (2018) Hamed Aghajani Derazkola et al. Journal of Manufacturing Processes
- Intermetallic compounds (IMCs) formation during dissimilar friction-stir welding of AA5005 aluminum alloy to St-52 steel: numerical modeling and experimental study
- (2018) H. Aghajani Derazkola et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Potentials and strategies of solid-state additive friction-stir manufacturing technology: A critical review
- (2018) F. Khodabakhshi et al. Journal of Manufacturing Processes
- An investigation on the dissimilar friction stir welding of T-joints between AA5754 aluminum alloy and poly(methyl methacrylate)
- (2018) Hamed Aghajani Derazkola et al. THIN-WALLED STRUCTURES
- Experimental and thermomechanical analysis of friction stir welding of poly(methyl methacrylate) sheets
- (2017) H. Aghajani Derazkola et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Friction-stir lap-joining of aluminium-magnesium/poly-methyl-methacrylate hybrid structures: thermo-mechanical modelling and experimental feasibility study
- (2017) H. Aghajani Derazkola et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effects of processing parameters on the characteristics of dissimilar friction-stir-welded joints between AA5058 aluminum alloy and PMMA polymer
- (2017) Hamed Aghajani Derazkola et al. Welding in the World
- Influence of plate position, tool offset and tool rotational speed on mechanical properties and microstructures of dissimilar Al/Cu friction stir welding joints
- (2016) Prakash Kumar Sahu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Investigations of tool tilt angle on properties friction stir welding of A441 AISI to AA1100 aluminium
- (2016) Majid Elyasi et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Effects of the Reversely Rotating Assisted Shoulder on Microstructures During the Reverse Dual-rotation Friction Stir Welding
- (2015) J.Q. Li et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Analysis of process parameters effects on dissimilar friction stir welding of AA1100 and A441 AISI steel
- (2015) H. A. Derazkola et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Review of tools for friction stir welding and processing
- (2012) Y N Zhang et al. CANADIAN METALLURGICAL QUARTERLY
- Material Flow in FSW of T-joints: Experimental and Numerical Analysis
- (2008) G. Buffa et al. International Journal of Material Forming
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started