Understanding the Role of π-Conjugated Polymers as Binders in Enabling Designs for High-Energy/High-Rate Lithium Metal Batteries

In Situ Measurement of Ionic and Electronic Conductivities of Conductive Polymers as a Function of Electrochemical Doping in Battery Electrolytes

(2021) Billal Zayat et al.   Journal of Physical Chemistry C

Concentration Gradient-Driven Aluminum Diffusion in a Single-Step Coprecipitation of a Compositionally Graded Precursor for LiNi0.8Co0.135Al0.065O2 with Mitigated Irreversibility of H2 ↔ H3 Phase Transition

(2020) Sasikala Natarajan et al.   ACS Applied Materials & Interfaces

Dihexyl-Substituted Poly(3,4-Propylenedioxythiophene) as a Dual Ionic and Electronic Conductive Cathode Binder for Lithium-Ion Batteries

(2020) Pratyusha Das et al.   CHEMISTRY OF MATERIALS

Scalable chemical approach to prepare crystalline Mn2V2O7 nanoparticles: introducing a new long-term cycling cathode material for lithium-ion battery

(2020) L. Shreenivasa et al.   Journal of Materials Science: Materials in Electronics

NCA, NCM811, and the Route to Ni-Richer Lithium-Ion Batteries

(2020) Christian M. Julien et al.   Energies

Pathways for practical high-energy long-cycling lithium metal batteries

(2019) Jun Liu et al.   Nature Energy

Bridging the academic and industrial metrics for next-generation practical batteries

(2019) Yuliang Cao et al.   Nature Nanotechnology

Nonaggregating Doped Polymers Based on Poly(3,4-Propylenedioxythiophene)

(2019) Amir Mazaheripour et al.   MACROMOLECULES

Self-smoothing anode for achieving high-energy lithium metal batteries under realistic conditions

(2019) Chaojiang Niu et al.   Nature Nanotechnology

Degradation Mechanism of Ni-Enriched NCA Cathode for Lithium Batteries: Are Microcracks Really Critical?

(2019) Kang-Joon Park et al.   ACS Energy Letters

High-energy lithium metal pouch cells with limited anode swelling and long stable cycles

(2019) Chaojiang Niu et al.   Nature Energy

Commercialization of Lithium Battery Technologies for Electric Vehicles

(2019) Xiaoqiao Zeng et al.   Advanced Energy Materials

An introduction of new nanostructured Zn0.29V2O5 cathode material for lithium ion battery: a detailed studies on synthesis, characterization and lithium uptake

(2019) L Shreenivasa et al.   Materials Research Express

Capacity Fading of Ni-Rich NCA Cathodes: Effect of Microcracking Extent

(2019) Gyeong Won Nam et al.   ACS Energy Letters

A Conductive Binder for High-Performance Sn Electrodes in Lithium-Ion Batteries

(2018) Yan Zhao et al.   ACS Applied Materials & Interfaces

Application of Poly(3-hexylthiophene-2,5-diyl) as a Protective Coating for High Rate Cathode Materials

(2018) Chun-Han Lai et al.   CHEMISTRY OF MATERIALS

Capacity Fading of Ni-Rich Li[NixCoyMn1–x–y]O2 (0.6 ≤ x ≤ 0.95) Cathodes for High-Energy-Density Lithium-Ion Batteries: Bulk or Surface Degradation?

(2018) Hoon-Hee Ryu et al.   CHEMISTRY OF MATERIALS

Single-particle measurements of electrochemical kinetics in NMC and NCA cathodes for Li-ion batteries

(2018) Ping-Chun Tsai et al.   Energy & Environmental Science

Pushing the limit of layered transition metal oxide cathodes for high-energy density rechargeable Li ion batteries

(2018) U.-H. Kim et al.   Energy & Environmental Science

Impact of Pore Tortuosity on Electrode Kinetics in Lithium Battery Electrodes: Study in Directionally Freeze-Cast LiNi 0.8 Co 0.15 Al 0.05 O 2 (NCA)

(2018) Benjamin Delattre et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

The lithium-ion battery: State of the art and future perspectives

(2018) Ghassan Zubi et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Rational design of a high-energy LiNi 0.8 Co 0.15 Al 0.05 O 2 cathode for Li-ion batteries

(2018) Ning Ding et al.   SOLID STATE IONICS

Enhanced Ion Conductivity in Conducting Polymer Binder for High-Performance Silicon Anodes in Advanced Lithium-Ion Batteries

(2018) Wenwu Zeng et al.   Advanced Energy Materials

Designing principle for Ni-rich cathode materials with high energy density for practical applications

(2018) Yu Xia et al.   Nano Energy

Advanced Lithium-Ion Batteries for Practical Applications: Technology, Development, and Future Perspectives

(2018) Sinho Choi et al.   Advanced Materials Technologies

Electrochemical impedance study of commercial LiNi0.80Co0.15Al0.05O2 electrodes as a function of state of charge and aging

(2018) Xinhua Zhu et al.   ELECTROCHIMICA ACTA

Dependence of Cell Failure on Cut-Off Voltage Ranges and Observation of Kinetic Hindrance in LiNi0.8Co0.15Al0.05O2

(2018) Jing Li et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Variation of Electronic Conductivity within Secondary Particles Revealing a Capacity-Fading Mechanism of Layered Ni-Rich Cathode

(2018) Jae-Hyung Kim et al.   ACS Energy Letters

High charge acceptance through interface reaction on carbon coated negative electrode for advanced lead-carbon battery system

(2018) T. Sadhasivam et al.   ELECTROCHIMICA ACTA

Lithium ion, lithium metal, and alternative rechargeable battery technologies: the odyssey for high energy density

(2017) Tobias Placke et al.   JOURNAL OF SOLID STATE ELECTROCHEMISTRY

Narrowing the Gap between Theoretical and Practical Capacities in Li-Ion Layered Oxide Cathode Materials

(2017) Maxwell D. Radin et al.   Advanced Energy Materials

Dead lithium: mass transport effects on voltage, capacity, and failure of lithium metal anodes

(2017) Kuan-Hung Chen et al.   Journal of Materials Chemistry A

Evaluating structure–function relationships toward three-component conjugated polymers via direct arylation polymerization (DArP) for Stille-convergent solar cell performance

(2017) Nemal S. Gobalasingham et al.   Journal of Materials Chemistry A

Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries

(2017) Paul Albertus et al.   Nature Energy

Surface Modification of Li-Rich Cathode Materials for Lithium-Ion Batteries with a PEDOT:PSS Conducting Polymer

(2016) Feng Wu et al.   ACS Applied Materials & Interfaces

A Commercial Conducting Polymer as Both Binder and Conductive Additive for Silicon Nanoparticle-Based Lithium-Ion Battery Negative Electrodes

(2016) Thomas M. Higgins et al.   ACS Nano

A systematic study of thick electrodes for high energy lithium ion batteries

(2016) Madhav Singh et al.   JOURNAL OF ELECTROANALYTICAL CHEMISTRY

Carboxymethyl chitosan/conducting polymer as water-soluble composite binder for LiFePO4 cathode in lithium ion batteries

(2016) Haoxiang Zhong et al.   JOURNAL OF POWER SOURCES

Surface Modification of Over-Lithiated Layered Oxides with PEDOT:PSS Conducting Polymer in Lithium-Ion Batteries

(2015) J. Lee et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Characterization of Electronic and Ionic Transport in Li1-xNi0.8Co0.15Al0.05O2 (NCA)

(2015) R. Amin et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Rechargeable Batteries: Grasping for the Limits of Chemistry

(2015) Erik J. Berg et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Effect of addition of a conducting polymer on the properties of the LiFePO4-based cathode material for lithium-ion batteries

(2015) S. N. Eliseeva et al.   RUSSIAN JOURNAL OF APPLIED CHEMISTRY

Synthesis of LiNi0.8Co0.15Al0.05O2 with 5-sulfosalicylic acid as a chelating agent and its electrochemical properties

(2015) Hongbin Xie et al.   Journal of Materials Chemistry A

Conducting Polymer-Skinned Electroactive Materials of Lithium-Ion Batteries: Ready for Monocomponent Electrodes without Additional Binders and Conductive Agents

(2014) Ju-Myung Kim et al.   ACS Applied Materials & Interfaces

Failure Mechanism for Fast-Charged Lithium Metal Batteries with Liquid Electrolytes

(2014) Dongping Lu et al.   Advanced Energy Materials

Electrochemically Oxidized Electronic and Ionic Conducting Nanostructured Block Copolymers for Lithium Battery Electrodes

(2013) Shrayesh N. Patel et al.   ACS Nano

A comprehensive understanding of electrode thickness effects on the electrochemical performances of Li-ion battery cathodes

(2012) Honghe Zheng et al.   ELECTROCHIMICA ACTA

Microstructural Observation of LiNi0.8Co0.15Al0.05O2after Charge and Discharge by Scanning Transmission Electron Microscopy

(2012) Yoshinari Makimura et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Conducting-polymer-based supercapacitor devices and electrodes

(2010) Graeme A. Snook et al.   JOURNAL OF POWER SOURCES