Recent research progress in friction stir welding of aluminium and copper dissimilar joint: A review
出版年份 2021 全文链接
标题
Recent research progress in friction stir welding of aluminium and copper dissimilar joint: A review
作者
关键词
Friction stir welding, Dissimilar joint, Mechanical property, Electrical property, Intermetallic compound
出版物
Journal of Materials Research and Technology-JMR&T
Volume -, Issue -, Pages -
出版商
Elsevier BV
发表日期
2021-09-17
DOI
10.1016/j.jmrt.2021.09.037
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Modeling of material flow in dissimilar friction stir lap welding of aluminum and brass using coupled Eulerian and Lagrangian method
- (2021) Mostafa Akbari et al. The International Journal of Advanced Manufacturing Technology
- Enhancements on dissimilar friction stir welding between AZ31 and SPHC mild steel with Al-Mg as powder additives
- (2021) Mohd Ridha Muhamad et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Interfacial reaction during friction stir assisted scribe welding of immiscible Fe and Mg alloy system
- (2021) Hrishikesh Das et al. Scientific Reports
- Investigation of the microstructure, mechanical properties and fracture mechanisms of dissimilar friction stir welded Aluminium/Titanium joints
- (2021) Taher A. Shehabeldeen et al. Journal of Materials Research and Technology-JMR&T
- Enhancing metallurgical and mechanical properties of friction stir butt welded joints of Al–Cu via cold sprayed Ni interlayer
- (2021) Wentao Hou et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Impact of shoulder morphology on macrostructural forming and the texture development during probeless friction stir spot welding
- (2021) Q. Chu et al. Journal of Materials Research and Technology-JMR&T
- Homogeneously Dispersed Graphene Nanoplatelets as Long-Term Corrosion Inhibitors for Aluminum Matrix Composites
- (2021) Yuming Xie et al. ACS Applied Materials & Interfaces
- Challenges, process requisites/inputs, mechanics and weld performance of dissimilar micro-friction stir welding (dissimilar μFSW): A comprehensive review
- (2021) Mayank Verma et al. Journal of Manufacturing Processes
- Insight into ultra-refined grains of aluminum matrix composites via deformation-driven metallurgy
- (2021) Yuming Xie et al. COMPOSITES COMMUNICATIONS
- Recent research progress in solid state friction-stir welding of aluminium–magnesium alloys: a critical review
- (2020) Virendra Pratap Singh et al. Journal of Materials Research and Technology-JMR&T
- Evaluation of capabilities of ultrasonic vibration on the surface, electrical and mechanical behaviours of aluminium to copper dissimilar friction stir welds
- (2020) Najib A. Muhammad et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- A review of microstructural changes occurring during FSW in aluminium alloys and their modelling
- (2020) Dimitri Jacquin et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Development of high strength and high electrical conductivity Cu/Gr composites through friction stir processing
- (2020) R. Bheekya Naik et al. MATERIALS LETTERS
- Effects of tool shoulder size on the thermal process and material flow behaviors in ultrasonic vibration enhanced friction stir welding
- (2020) L. Shi et al. Journal of Manufacturing Processes
- Machine learning based hierarchy of causative variables for tool failure in friction stir welding
- (2020) Y. Du et al. ACTA MATERIALIA
- The role of tool offset on the microstructure and mechanical properties of Al/Cu friction stir welded joints
- (2020) Wentao Hou et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and Conductivity of the Al-Cu Joint Processed by Friction Stir Welding
- (2020) Yanni Wei et al. Advances in Materials Science and Engineering
- Effect of Sn interlayer on mechanical properties and microstructure in Al/Mg friction stir lap welding with different rotational speeds
- (2020) Bo Zheng et al. Materials Research Express
- Weldability, microstructure, and residual stress in Al/Cu and Cu/Al friction stir spot weld joints with Zn interlayer
- (2020) Adel Boucherit et al. The International Journal of Advanced Manufacturing Technology
- Effects of Al‐Ni powder addition on dissimilar friction stir welding between AA7075‐T6 and 304 L
- (2020) M.R. Muhamad et al. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
- Determination of best tool geometry for friction stir welding of AA 6061-T6 using hybrid PCA-TOPSIS optimization method
- (2020) Abhijit Banik et al. MEASUREMENT
- Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
- (2020) A. Heidarzadeh et al. PROGRESS IN MATERIALS SCIENCE
- Structure-property characteristics of Al-Cu joint formed by high-rotation-speed friction stir lap welding without tool penetration into lower Cu sheet
- (2020) Qilong Guan et al. Journal of Manufacturing Processes
- Analysis of material distribution in dissimilar friction stir welded joints of Al 1050 and copper
- (2020) Nikhil Gotawala et al. Journal of Manufacturing Processes
- Friction stir welding of Ti-6Al-4V alloy: Friction tool, microstructure, and mechanical properties
- (2020) Junping Li et al. Journal of Manufacturing Processes
- Effect of sintering techniques on microstructural, mechanical and tribological properties of Al-SiC composites
- (2020) Mohd Bilal Naim Shaikh et al. Surfaces and Interfaces
- Corrosion Resistance of Aluminum-Copper Alloys with Different Grain Structures
- (2020) Alejandra S. Román et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Recent progress on control strategies for inherent issues in friction stir welding
- (2020) Xiangchen Meng et al. PROGRESS IN MATERIALS SCIENCE
- Microstructural characterization and mechanical properties of micro friction stir welded dissimilar Al/Cu ultra-thin sheets
- (2020) Yue Mao et al. Journal of Manufacturing Processes
- Characterizations of microstructure, crystallographic texture and mechanical properties of dissimilar friction stir welding joints for AA2024 and AA7075 under different tool shoulder end profiles
- (2020) Chenghang Zhang et al. Materials Today Communications
- Gaussian process regression to predict the morphology of friction-stir-welded aluminum/copper lap joints
- (2019) M. Krutzlinger et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Weldability and shear strength feasibility study for automotive electric vehicle battery tab interconnects
- (2019) Abhishek Das et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Optimization of Process Parameters for Friction Stir Welding of Aluminum and Copper Using the Taguchi Method
- (2019) Nima Eslami et al. Metals
- Ultrasonic vibration assisted friction stir welding of aluminium alloy and pure copper
- (2019) Najib A. Muhammad et al. Journal of Manufacturing Processes
- Electrical and mechanical properties of friction stir welded Al-Cu butt joints
- (2019) N. Eslami et al. Welding in the World
- Tool eccentricity in friction stir welding: a comprehensive review
- (2019) L. H. Shah et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Analysis of the Temperature Field in Al-Cu Dissimilar Materials Friction Stir Welding
- (2019) Hongyu Sun et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Microstructure and Mechanical Properties of Dissimilar Al – Cu Joints Formed by Friction Stir Welding
- (2019) E. N. Ryl’kov et al. METAL SCIENCE AND HEAT TREATMENT
- Friction Stir Welding of Copper: Numerical Modeling and Validation
- (2019) Pankaj Sahlot et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Effect of a Zinc Interlayer on a Cu/Al Lap Joint in Ultrasound-Assisted Friction Stir Welding
- (2019) Shujin Chen et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Influence of Tool Material, Tool Geometry, Process Parameters, Stacking Sequence, and Heat Sink on Producing Sound Al/Cu Lap Joints through Friction Stir Welding
- (2019) Wei et al. Metals
- A Study on Electrical and Electrochemical Characteristics of Friction Stir Welded Lithium-Ion Battery Tabs for Electric Vehicles
- (2019) Omkar Mypati et al. JOURNAL OF ELECTRONIC MATERIALS
- Effect of knurling shoulder design with polygonal pins on material flow and mechanical properties during friction stir welding of Al–Mg–Si alloy
- (2019) Krishna Kishore MUGADA et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Effect of Tilt Angle and Pin Depth on Dissimilar Friction Stir Lap Welded Joints of Aluminum and Steel Alloys
- (2019) Veerendra Chitturi et al. Materials
- Numerical modelling on cooling assisted friction stir welding of dissimilar Al-Cu joint
- (2019) Nirav P. Patel et al. Journal of Manufacturing Processes
- Role of tool design on thermal cycling and mechanical properties of a high-speed micro friction stir welded 7075-T6 aluminum alloy
- (2019) Y. Ni et al. Journal of Manufacturing Processes
- Effect of tool pin side area ratio on temperature distribution in friction stir welding
- (2019) A.M. Sadoun et al. Results in Physics
- Improving interface morphology and shear failure load of friction stir lap welding by changing material concentrated zone location
- (2018) Zhenlei Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Special welding parameters study on Cu/Al joint in laser-heated friction stir welding
- (2018) Xinjiang Fei et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of Heat Input on the Mechanical Behaviour of Al-Cu FSW Lap Joints
- (2018) Aldoni Gabriel Wiedenhoft et al. Materials Research-Ibero-american Journal of Materials
- Friction Stir Welding of Dissimilar Al/Al and Al/Non-Al Alloys: A Review
- (2018) Xiangbin Wang et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Numerical model for prediction of tool wear and worn-out pin profile during friction stir welding
- (2018) Pankaj Sahlot et al. WEAR
- Dissimilar Joining of Pure Copper to Aluminum Alloy via Friction Stir Welding
- (2018) Farhad Bakhtiari Argesi et al. Acta Metallurgica Sinica-English Letters
- State-of-the-Art and Energy Management System of Lithium-Ion Batteries in Electric Vehicle Applications: Issues and Recommendations
- (2018) Mahammad A. Hannan et al. IEEE Access
- The study of material flow behaviour in dissimilar material FSW of AA6061 and Cu-B370 alloys plates
- (2018) Arun Kumar Kadian et al. Journal of Manufacturing Processes
- The origin of different microstructural and strengthening mechanisms of copper and brass in their dissimilar friction stir welded joint
- (2018) Akbar Heidarzadeh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Dissimilar Friction Stir Butt Welding of Aluminum and Copper with Cross-Section Adjustment for Current-Carrying Components
- (2018) Nima Eslami et al. Metals
- Effect of pin profile on microstructure and mechanical properties of friction stir spot welded Al-Cu dissimilar metals
- (2018) L. Zhou et al. Journal of Manufacturing Processes
- Microstructure characterization and mechanical behavior of dissimilar friction stir welded Al/Cu couple with different joint configurations
- (2017) Wei Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Analysis on the Fracture of Al-Cu Dissimilar Materials Friction Stir Welding Lap Joint
- (2017) Hongyu Sun et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Hybrid approaches of assisted heating and cooling for friction stir welding of copper to aluminum joints
- (2017) Kush P. Mehta et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- On the effect of tool offset in hybrid-FSW of copper-aluminium alloy
- (2017) D. K. Yaduwanshi et al. MATERIALS AND MANUFACTURING PROCESSES
- Development of processing windows for friction stir spot welding of aluminium Al5052 /copper C27200 dissimilar materials
- (2017) S. SIDDHARTH et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- A Comparison of Different Finite Element Methods in the Thermal Analysis of Friction Stir Welding (FSW)
- (2017) Bahman Meyghani et al. Metals
- Strength and failure analysis of similar and dissimilar friction stir spot welds: Influence of different tools and pin geometries
- (2017) Ashu Garg et al. MATERIALS & DESIGN
- Numerical and experimental investigation of thermal history, material flow and mechanical properties of friction stir welded aluminium alloy to DHP copper dissimilar joint
- (2016) T. K. Bhattacharya et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of plate position, tool offset and tool rotational speed on mechanical properties and microstructures of dissimilar Al/Cu friction stir welding joints
- (2016) Prakash Kumar Sahu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- 3-dimensional numerical analysis of friction stir welding of copper and aluminum
- (2016) M. E. Aalami-Aleagha et al. Journal of Mechanical Science and Technology
- Critical review on friction stir welding of aluminium to copper
- (2016) I. Galvão et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Evolving properties of friction stir spot welds between AA1060 and commercially pure copper C11000
- (2016) Mukuna P. MUBIAYI et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Effect of Friction Stir Welding Parameters on the Mechanical and Microstructure Properties of the Al-Cu Butt Joint
- (2016) Sare Celik et al. Metals
- Numerical modeling and experimental investigation on plasma-assisted hybrid friction stir welding of dissimilar materials
- (2016) D.K. Yaduwanshi et al. MATERIALS & DESIGN
- Influence of tool design and process parameters on dissimilar friction stir welding of copper to AA6061-T651 joints
- (2015) Kush P. Mehta et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The effect of preheating on mechanical properties of friction stir welded dissimilar joints of pure copper and AA7075 aluminum alloy sheets
- (2015) Seyed Vahid Safi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Thermal Performance Evaluation of Friction Stir Welded and Bolted Cold Plates with Al/Cu Interface
- (2015) A. K. Lakshminarayanan et al. JOM
- Tool travel speed effects on the microstructure of friction stir welded aluminum–copper joints
- (2015) M. Felix Xavier Muthu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Banded structures in friction stir welded Al alloys
- (2015) A. Tongne et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of tool shoulder features on defects and tensile properties of friction stir welded aluminum 6061-T6
- (2015) Luis Trueba et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The dissimilar friction stir lap welding of 1A99 Al to pure Cu using Zn as filler metal with “pinless” tool configuration
- (2015) Binbin Kuang et al. MATERIALS & DESIGN
- Self-piercing riveting of similar and dissimilar metal sheets of aluminum alloy and copper alloy
- (2015) Xiaocong He et al. MATERIALS & DESIGN
- Corrosion susceptibility of dissimilar friction stir welds of AA5083 and AA6082 alloys
- (2015) U. Donatus et al. MATERIALS CHARACTERIZATION
- Effect of Interfacial Microstructure Evolution on Mechanical Properties and Fracture Behavior of Friction Stir-Welded Al-Cu Joints
- (2015) P. Xue et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure and mechanical properties of dissimilar Al–Cu joints by friction stir welding
- (2015) Qiu-zheng ZHANG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Experimental and theoretical analysis of friction stir welding of Al–Cu joints
- (2014) Ahmed O. Al-Roubaiy et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigation on dissimilar underwater friction stir lap welding of 6061-T6 aluminum alloy to pure copper
- (2014) Jingqing Zhang et al. MATERIALS & DESIGN
- Effects of Tilt Angle on the Properties of Dissimilar Friction Stir Welding Copper to Aluminum
- (2014) Kush P. Mehta et al. MATERIALS AND MANUFACTURING PROCESSES
- Studying of tool rotation speed on mechanical properties of copper–Al5083 butt joint welded by friction stir welding
- (2014) Hossein Bisadi et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Effects of processing parameters on corrosion properties of dissimilar friction stir welds of aluminium and copper
- (2014) Esther T. AKINLABI et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Establishing a correlation between interfacial microstructures and corrosion initiation sites in Al/Cu joints by SEM–EDS and AFM–SKPFM
- (2013) M. Sarvghad-Moghaddam et al. CORROSION SCIENCE
- Effect of Tool Pin Insertion Depth on Friction Stir Lap Welding of Aluminum to Stainless Steel
- (2013) Yanni Wei et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Influence of aluminium alloy type on dissimilar friction stir lap welding of aluminium to copper
- (2013) I. Galvão et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructural evolution and mechanical properties of dissimilar Al–Cu joints produced by friction stir welding
- (2013) C.W. Tan et al. MATERIALS & DESIGN
- Enhancing metallurgical and mechanical properties of friction stir lap welding of Al–Cu using intermediate layer
- (2013) M Akbari et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Solid-state welding of aluminum to copper—case studies
- (2013) Jean Pierre Bergmann et al. Welding in the World
- The role of Metal-Matrix Composite development During Friction Stir Welding of Aluminum to Brass in Weld Characteristics
- (2012) H. R. Zareie Rajani et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- The influences of rotational and welding speeds on microstructures and mechanical properties of friction stir welded Al5083 and commercially pure copper sheets lap joints
- (2012) H. Bisadi et al. MATERIALS & DESIGN
- Multiscale Study of Interfacial Intermetallic Compounds in a Dissimilar Al 6082-T6/Cu Friction-Stir Weld
- (2012) M. N. Avettand-Fenoël et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Influence of Tool Offsetting on the Structure and Morphology of Dissimilar Aluminum to Copper Friction-Stir Welds
- (2012) Ivan Galvão et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of materials position on friction stir lap welding of Al to Cu
- (2012) M Akbari et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Microstructure and mechanical properties of dissimilar pure copper/1350 aluminum alloy butt joints by friction stir welding
- (2012) Xia-wei LI et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Effect of Shoulder Size on Weld Properties of Dissimilar Metal Friction Stir Welds
- (2011) E. T. Akinlabi JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar Al–Cu joints
- (2011) P. Xue et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Al-to-Cu Friction Stir Lap Welding
- (2011) Vahid Firouzdor et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Formation and distribution of brittle structures in friction stir welding of aluminium and copper: influence of process parameters
- (2011) I Galvão et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Achieving high property friction stir welded aluminium/copper lap joint at low heat input
- (2011) P Xue et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Review: friction stir welding tools
- (2011) R Rai et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effect of tool rotational speed and probe length on lap joint quality of a friction stir welded magnesium alloy
- (2010) X. Cao et al. MATERIALS & DESIGN
- Material flow in heterogeneous friction stir welding of aluminium and copper thin sheets
- (2010) I. Galvão et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Weldability and mechanical properties of dissimilar aluminum–copper lap joints made by friction stir welding
- (2009) T. Saeid et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of friction stir processing on corrosion resistance of aluminum–copper alloy gas tungsten arc welds
- (2009) K. Prasad Rao et al. MATERIALS & DESIGN
- Corrosion behavior of hypoeutectic Al-Cu alloys in H2SO4 and NaCl solutions
- (2009) Wislei R. Osório et al. Acta Metallurgica Sinica-English Letters
- Microstructural and mechanical properties of friction stir welded aluminum/copper lap joints
- (2007) A. Abdollah-Zadeh et al. JOURNAL OF ALLOYS AND COMPOUNDS
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started