标题
Review: friction stir welding tools
作者
关键词
-
出版物
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
Volume 16, Issue 4, Pages 325-342
出版商
Informa UK Limited
发表日期
2011-06-21
DOI
10.1179/1362171811y.0000000023
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Recent Developments in the Friction Stir Welding of Titanium Alloys
- (2013) M. J. Russell et al. Welding in the World
- Friction stir welded structural materials: beyond Al-alloys
- (2011) G. Çam INTERNATIONAL MATERIALS REVIEWS
- Identification of Process Parameters for Friction Stir Welding Ti–6Al–4V
- (2010) P. Edwards et al. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
- Analysis of effect of tool geometry on plastic flow during friction stir spot welding using particle method
- (2010) Shigeki Hirasawa et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Hook formation and mechanical properties in AZ31 friction stir spot welds
- (2010) Y.H. Yin et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A newly developed tool without probe for friction stir spot welding and its performance
- (2010) Y. Tozaki et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Joining of CP-Ti to 304 stainless steel using friction stir welding technique
- (2010) M. Fazel-Najafabadi et al. MATERIALS & DESIGN
- Influence of tool pin profile on the metallurgical and mechanical properties of friction stir welded Al–10wt.% TiB2 metal matrix composite
- (2010) S.J. Vijay et al. MATERIALS & DESIGN
- Effect of tool rotational speed and probe length on lap joint quality of a friction stir welded magnesium alloy
- (2010) X. Cao et al. MATERIALS & DESIGN
- Microstructure and mechanical properties of friction stir welded Al/Mg2Si metal matrix cast composite
- (2010) H. Nami et al. MATERIALS & DESIGN
- Prediction of tensile strength of friction stir welded aluminium matrix TiCp particulate reinforced composite
- (2010) S. Gopalakrishnan et al. MATERIALS & DESIGN
- The microstructure and mechanical properties of friction stir welded Al–Zn–Mg alloy in as welded and heat treated conditions
- (2010) R.K.R. Singh et al. MATERIALS & DESIGN
- Influence of friction stir welding process and tool parameters on strength properties of AA7075-T6 aluminium alloy joints
- (2010) S. Rajakumar et al. MATERIALS & DESIGN
- Microstructural evolution during friction stir welding of Ti–15V–3Cr–3Al–3Sn alloy
- (2010) S. Mironov et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Material flow during friction stir spot welding
- (2010) Q. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Tensile properties of a friction stir welded magnesium alloy: Effect of pin tool thread orientation and weld pitch
- (2010) S.M. Chowdhury et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Pin Shapes on Joint Characteristics of Friction Stir Spot Welded AA5J32 Sheet
- (2010) Don-Hyun Choi et al. MATERIALS TRANSACTIONS
- Parametric finite-element studies on the effect of tool shape in friction stir welding
- (2010) H Li et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Effect of interfacial microstructure on lap shear strength of friction stir spot weld of aluminium alloy to magnesium alloy
- (2010) Y. S. Sato et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Spot joining of AA 5754 and high strength steel sheets by consumable bit
- (2010) M. P. Miles et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effect of surface states of steel on microstructure and mechanical properties of lap joints of magnesium alloy and steel by friction stir welding
- (2010) Y. C. Chen et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Friction stir spot welding of AA 1050 Al alloy and hot stamped boron steel (22MnB5)
- (2010) A. A. M. da Silva et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Friction stir welding of ductile iron and low carbon steel
- (2010) C.-P. Cheng et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Peak temperatures during friction stir welding of Ti–6Al–4V
- (2010) P. Edwards et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Friction stir welding of pure titanium lap joint
- (2010) H. Liu et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Influence of tool design on mechanical properties of AZ31 friction stir spot welds
- (2010) Y. H. Yin et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Experimental investigation of onion ring structure formation in friction stir butt welds of copper plates produced by non-threaded tool pin
- (2010) J. Teimournezhad et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Optimal FSW process parameters for interface and welded zone toughness of dissimilar aluminium–steel joint
- (2010) T. P. Chen et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Friction stir welding of dissimilar alloys – a perspective
- (2010) T. DebRoy et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Friction stir spot welding of DP780 carbon steel
- (2010) M. Santella et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Study of friction stir joining of thin aluminium sheets in lap joint configuration
- (2010) M. K. Yadava et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Metallurgical analysis of Al/Cu friction stir spot welding
- (2010) R. Heideman et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Through-thickness crystallographic texture of stationary shoulder friction stir welded aluminium
- (2010) M.M.Z. Ahmed et al. SCRIPTA MATERIALIA
- Toward optimum friction stir welding tool shoulder diameter
- (2010) A. Arora et al. SCRIPTA MATERIALIA
- Effect of tool geometry on hook formation and static strength of friction stir spot welded aluminum 5754-O sheets
- (2009) H. Badarinarayan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Frictional wear evaluation of WC–Co alloy tool in friction stir spot welding of low carbon steel plates
- (2009) D.H. Choi et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Properties of tungsten-rhenium and tungsten-rhenium with hafnium carbide
- (2009) Todd Leonhardt JOM
- Investigations on the Effects of the Tool Material, Geometry, and Tilt Angle on Friction Stir Welding of Pure Titanium
- (2009) K. Reshad Seighalani et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Understanding the material flow path of friction stir welding process using unthreaded tools
- (2009) Olivier Lorrain et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Process parameters study on FSW joint of dissimilar metals for aluminum–steel
- (2009) Thaiping Chen JOURNAL OF MATERIALS SCIENCE
- The application of shoulderless conical tools in friction stir welding: An experimental and theoretical study
- (2009) D.H. Lammlein et al. MATERIALS & DESIGN
- Effect of tool geometry on microstructure and mechanical properties of friction stir lap welded magnesium alloy and steel
- (2009) Y.C. Chen et al. MATERIALS & DESIGN
- Friction stir welding of lap joints: Influence of process parameters on the metallurgical and mechanical properties
- (2009) G. Buffa et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Friction stir welding of titanium alloy TiAl6V4 to aluminium alloy AA2024-T3
- (2009) Ulrike Dressler et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of alloying elements on interface microstructure of Mg–Al–Zn magnesium alloys and titanium joint by friction stir welding
- (2009) Masayuki Aonuma et al. Materials Science and Engineering B-Advanced Functional Solid-State Materials
- Boride Formation Induced by pcBN Tool Wear in Friction-Stir-Welded Stainless Steels
- (2009) Seung Hwan C. Park et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of process conditions on superplastic forming behaviour in Ti–6Al–4V friction stir welds
- (2009) P. Edwards et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effect of contamination on microstructure in friction stir spot welded DP590 steel
- (2009) R. Ohashi et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effect of friction stir welding conditions on properties and microstructures of high strength automotive steel
- (2009) M. P. Miles et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Friction stir welding of hypereutectoid steel (SK5) below eutectoid temperature
- (2009) Y. D. Chung et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effect of reduced or zero pin length and anvil insulation on friction stir spot welding thin gauge 6111 automotive sheet
- (2009) D. Bakavos et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Evaluation of microstructure and properties in friction stir welded superaustenitic stainless steel
- (2009) Y. S. Sato et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Microstructural and mechanical characterisation of friction stir welded 15-5PH steel
- (2009) T. Weinberger et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Tool design and stir zone grain size in AZ31 friction stir spot welds
- (2009) N. Sun et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Investigation of microstructure, surface and subsurface characteristics in titanium alloy friction stir welds of varied thicknesses
- (2009) P. D. Edwards et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Dissimilar friction stir spot welding of low carbon steel and Al–Mg alloy by formation of IMCs
- (2009) C.-Y. Lee et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Critical assessment: friction stir welding of steels
- (2009) H. K. D. H. Bhadeshia et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effect of friction stir processing tool probe on fabrication of SiC particle reinforced composite on aluminium surface
- (2009) E. R. I. Mahmoud et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Improved process stability during friction stir welding of 5 cm thick copper canisters through shoulder geometry and parameter studies
- (2009) L. Cederqvist et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Joint formation in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds
- (2009) T. Liyanage et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Texture development in the stir zone of near-α titanium friction stir welds
- (2009) K.E. Knipling et al. SCRIPTA MATERIALIA
- The stir zone microstructure and its formation mechanism in Ti–6Al–4V friction stir welds
- (2009) L. Zhou et al. SCRIPTA MATERIALIA
- Effect of tool geometry on static strength of friction stir spot-welded aluminum alloy
- (2008) H. Badarinarayan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Toward reliable calculations of heat and plastic flow during friction stir welding of Ti-6Al-4V alloy
- (2008) R. Nandan et al. International Journal of Materials Research
- Numerical and Experimental Investigations on the Loads Carried by the Tool During Friction Stir Welding
- (2008) Hosein Atharifar et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Thermal Expansion Coefficient and Mechanical Properties of Friction Stir Welded Invar (Fe-36%Ni)
- (2008) Bharat K. Jasthi et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Selection of FSW tool pin profile, shoulder diameter and material for joining AZ31B magnesium alloy – An experimental approach
- (2008) G. Padmanaban et al. MATERIALS & DESIGN
- Microstructural characterization and mechanical properties in friction stir welding of aluminum and titanium dissimilar alloys
- (2008) Y.C. Chen et al. MATERIALS & DESIGN
- Influence of Tool Geometry in Friction Stir Welding
- (2008) K. Kumar et al. MATERIALS AND MANUFACTURING PROCESSES
- Microstructures and mechanical properties of friction stir welded dissimilar copper/brass joints
- (2008) C. Meran et al. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
- Recent advances in friction-stir welding – Process, weldment structure and properties
- (2008) R NANDAN et al. PROGRESS IN MATERIALS SCIENCE
- Failure modes and fatigue life estimations of spot friction welds in lap-shear specimens of aluminum 6111-T4 sheets. Part 2: Welds made by a flat tool
- (2007) P LIN et al. INTERNATIONAL JOURNAL OF FATIGUE
- Failure modes and fatigue life estimations of spot friction welds in lap-shear specimens of aluminum 6111-T4 sheets. Part 1: Welds made by a concave tool
- (2007) P LIN et al. INTERNATIONAL JOURNAL OF FATIGUE
- Characterization of the influences of FSW tool geometry on welding forces and weld tensile strength using an instrumented tool
- (2007) D.G. Hattingh et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influences of tool pin profile and tool shoulder diameter on the formation of friction stir processing zone in AA6061 aluminium alloy
- (2007) K. Elangovan et al. MATERIALS & DESIGN
- The role of friction stir welding tool on material flow and weld formation
- (2007) K. Kumar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Stir zone microstructure of commercial purity titanium friction stir welded using pcBN tool
- (2007) Yu Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started