Achieving ultra-high ductility and fracture toughness in molybdenum via Mo2TiC2 MXene addition

Theory of designing the gradient microstructured metals for overcoming strength-ductility trade-off

(2020) Jitang Fan et al.   SCRIPTA MATERIALIA

Increasing the ductility of heat-resistant AlNp/Al composites by submicron Al2O3 particles

(2020) Kewei Xie et al.   MATERIALS CHARACTERIZATION

Preparation, microstructure and tensile properties of two dimensional MXene reinforced copper matrix composites

(2020) Mengqi Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Concurrent enhancement of strength and ductility for Al-Si binary alloy by refining Si phase to nanoscale

(2019) Maowen Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Achieving ultra-high strengthening and toughening efficiency in carbon nanotubes/magnesium composites via constructing micro-nano layered structure

(2019) Yeyang Xiang et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Mechanical properties and frictional resistance of Al composites reinforced with Ti3C2Tx MXene

(2019) Jie Hu et al.   CHINESE CHEMICAL LETTERS

Enhanced fracture toughness and toughening mechanisms of fine-grained Mo–12Si–8.5B alloy with a bi-modally structured α-Mo grain

(2019) Rui Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of thermal residual stresses and thermal-induced geometrically necessary dislocations on size-dependent strengthening of particle-reinforced MMCs

(2018) Dongfeng Cao et al.   COMPOSITE STRUCTURES

Effect of phase coarsening on the mechanical properties of alloys: II. Mechanism analysis

(2018) J.C. Li et al.   ENGINEERING FRACTURE MECHANICS

Microstructure and fracture toughness of Nb-Si based alloys with Ta and W additions

(2018) Yueling Guo et al.   INTERMETALLICS

Preparation and characterization of Mo/ZrO 2 –Y 2 O 3 composites

(2018) Liying Yao et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Crack initiation mechanism in lanthanum-doped titanium-zirconium-molybdenum alloy during sintering and rolling

(2018) Ping Hu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fabrication, interfacial characteristics and strengthening mechanisms of ZrB 2 microparticles reinforced Cu composites prepared by hot-pressed sintering

(2018) Chenchen Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Secondary phases formation in lanthanum-doped titanium-zirconium-molybdenum alloy

(2018) Bo-liang Hu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Probabilistic design of a molybdenum-base alloy using a neural network

(2018) B.D. Conduit et al.   SCRIPTA MATERIALIA

Silicon carbide matrix composites reinforced with two-dimensional titanium carbide – Manufacturing and properties

(2018) Jaroslaw Wozniak et al.   CERAMICS INTERNATIONAL

Role of structural parameters on strength-ductility combination of laminated carbon nanotubes/copper composites

(2018) Linglong Meng et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Microstructure-based modelling of fracture of particulate reinforced metal matrix composites

(2018) Qi Wu et al.   COMPOSITES PART B-ENGINEERING

Production and characterization of TZM based TiC or ZrC reinforced composites prepared by spark plasma sintering (SPS)

(2018) Cansinem Tuzemen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Influences of HfC particles on microstructure, mechanical properties and ablation resistance at elevated temperature of Mo-15W-HfC alloys

(2017) Lilin Yang et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Microstructure, magneto-structural transformations and mechanical properties of Ni 50 Mn 37.5 Sn 12.5-x In x (x=0, 2, 4, 6 % at.) metamagnetic shape memory alloys sintered by vacuum hot pressing

(2017) W. Maziarz et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Preparation and characterization of polymer-Ti3 C2 T x (MXene) composite nanofibers produced via electrospinning

(2017) Elisa A. Mayerberger et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Densification and grain growth of Gd2Zr2O7 nanoceramics during pressureless sintering

(2017) Mao Zhou et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Effects of high-energy ball milling and reactive spark plasma sintering on the densification of HfC-SiC composites

(2017) Lun Feng et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Electroless Ni-plated graphene for tensile strength enhancement of copper

(2017) Rongrong Jiang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

2D metal carbides (MXenes) in fibers

(2017) Babak Anasori et al.   Materials Today

Preparation of a new 2D MXene/PES composite membrane with excellent hydrophilicity and high flux

(2017) Runlin Han et al.   RSC Advances

Processing and characterization of spark plasma sintered TZM alloy

(2016) Can Burak Danisman et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Simultaneously enhancing strength and ductility of carbon nanotube/aluminum composites by improving bonding conditions

(2016) B. Chen et al.   SCRIPTA MATERIALIA

Grains versus subgrains: How growth kinetics is affected by the presence of nanosized dispersoids

(2016) A.H. Omranpoor et al.   SOLID STATE COMMUNICATIONS

Preparation, mechanical and anti-friction performance of MXene/polymer composites

(2016) Heng Zhang et al.   MATERIALS & DESIGN

Two-Dimensional, Ordered, Double Transition Metals Carbides (MXenes)

(2015) Babak Anasori et al.   ACS Nano

Mechanisms of subgrain coarsening and its effect on the mechanical properties of carbon-supersaturated nanocrystalline hypereutectoid steel

(2015) Y.J. Li et al.   ACTA MATERIALIA

Coupling effect of intergranular and intragranular particles on ductile fracture of Mo–La2O3 alloys

(2015) P.M. Cheng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Fabrication of metal matrix composites by friction stir processing with different Particles and processing parameters

(2015) S. Sahraeinejad et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mo2TiAlC2: A new ordered layered ternary carbide

(2015) Babak Anasori et al.   SCRIPTA MATERIALIA

High strain-rate response and deformation mechanisms in polycrystalline Ti2AlC

(2014) Riddhiman Bhattacharya et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Ductilizing Mo–La 2 O 3 alloys with ZrB 2 addition

(2014) P.M. Cheng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Improving the tensile ductility and uniform elongation of high-strength ultrafine-grained Al alloys by lowering the grain boundary misorientation angle

(2014) T. Hu et al.   SCRIPTA MATERIALIA

Microstructure and mechanical properties of ZrO2 ceramics toughened by 5–20vol% Ta metallic particles fabricated by pressureless sintering

(2013) A. Smirnov et al.   CERAMICS INTERNATIONAL

Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility

(2013) G. Liu et al.   NATURE MATERIALS

Effect of Mo on microstructure and mechanical properties of Nb–Ti–C–B multiphase alloy

(2012) Xiaodong He et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Toughening of zirconia/alumina composites by the addition of graphene platelets

(2012) Jian Liu et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Strong and ductile particulate reinforced ultrafine-grained metallic composites fabricated by flake powder metallurgy

(2012) Xizhou Kai et al.   SCRIPTA MATERIALIA