标题
Powder metallurgy with space holder for porous titanium implants: A review
作者
关键词
Powder metallurgy, Space holder method, Porous titanium structures, Medical devices, Stress shielding effect, Porous materials permeability, Interconnected porosity, Porous bone substitute materials, Open-cell titanium foams, Sintering-dissolution technique
出版物
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
Volume 76, Issue -, Pages 129-149
出版商
Elsevier BV
发表日期
2020-11-07
DOI
10.1016/j.jmst.2020.11.005
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Low Young’s Modulus and High Strength Obtained in Ti-Nb-Zr-Cr Alloys by Optimizing Zr Content
- (2020) Qiang Li et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Strengthening mechanism and corrosion resistance of beta-type Ti-Nb-Zr-Mn alloys
- (2020) S.F. Jawed et al. Materials Science & Engineering C-Materials for Biological Applications
- Fabrication, Morphology Analysis, and Mechanical Properties of Ti Foams Manufactured Using the Space Holder Method for Bone Substitute Materials
- (2019) Oktay Cetinel et al. Metals
- Production and Digital Image Correlation Analysis of Titanium Foams with Different Pore Morphologies as a Bone-Substitute Material
- (2019) Mohammed Shbeh et al. Advances in Materials Science and Engineering
- Designing bioactive porous titanium interfaces to balance mechanical properties and in vitro cells behavior towards increased osseointegration
- (2019) Ana Civantos et al. SURFACE & COATINGS TECHNOLOGY
- Comparison of Titanium and Bioresorbable Plates in “A” Shape Plate Properties—Finite Element Analysis
- (2019) Rafał Zieliński et al. Materials
- Porous Titanium for Biomedical Applications: Evaluation of the Conventional Powder Metallurgy Frontier and Space-Holder Technique
- (2019) Sheila Lascano et al. Applied Sciences-Basel
- Mechanical characterization and deformation behavior of β-stabilized Ti-Nb-Sn-Cr alloys
- (2019) S.F. Jawed et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The design and in vivo testing of a locally stiffness-matched porous scaffold
- (2019) Shaaz Ghouse et al. Applied Materials Today
- Incorporation of HA into porous titanium to form Ti-HA biocomposite foams
- (2019) Mohammed Shbeh et al. Journal of the Mechanical Behavior of Biomedical Materials
- Deposition and Biological Evaluation of Ta Coating on Porous SiC Scaffold for Orthopedic Application
- (2019) Hui Xie et al. Science of Advanced Materials
- Fracture and Fatigue of Titanium Narrow Dental Implants: New Trends in Order to Improve the Mechanical Response
- (2019) Eugenio Velasco-Ortega et al. Materials
- Effects of pore size and porosity of surface-modified porous titanium implants on bone tissue ingrowth
- (2019) Jing-pu ZHENG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Accentuated osseointegration in osteogenic nanofibrous coated titanium implants
- (2019) Siddhartha Das et al. Scientific Reports
- Development and implementation of a sequential compaction device to obtain radial graded porosity cylinders
- (2019) P. Trueba et al. Journal of Manufacturing Processes
- Compressive and fatigue behavior of functionally graded Ti-6Al-4V meshes fabricated by electron beam melting
- (2018) S. Zhao et al. ACTA MATERIALIA
- A combined passive and active musculoskeletal model study to estimate L4-L5 load sharing
- (2018) F. Azari et al. JOURNAL OF BIOMECHANICS
- Biocompatible porous titanium scaffolds produced using a novel space holder technique
- (2018) Yunhui Chen et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Long-Term Outcomes of Corrective Osteotomies Using Porous Titanium Wedges for Flexible Flatfoot Deformity Correction
- (2018) Michael Matthews et al. Journal of Foot & Ankle Surgery
- Effect of micropores on the microstructure and mechanical properties of porous Cu-Sn-Ti composites
- (2018) Biao Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Bony ingrowth potential of 3D-printed porous titanium alloy: a direct comparison of interbody cage materials in an in vivo ovine lumbar fusion model
- (2018) Kirk C. McGilvray et al. Spine Journal
- Two Different Strategies to Enhance Osseointegration in Porous Titanium: Inorganic Thermo-Chemical Treatment Versus Organic Coating by Peptide Adsorption
- (2018) Monica Ortiz-Hernandez et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Porous Titanium Scaffolds Fabricated by Metal Injection Moulding for Biomedical Applications
- (2018) Ali Dehghan-Manshadi et al. Materials
- Bacterial behavior on coated porous titanium substrates for biomedical applications
- (2018) Cristina Domínguez-Trujillo et al. SURFACE & COATINGS TECHNOLOGY
- Antibacterial PHAs coating for titanium implants
- (2017) Alejandra Rodríguez-Contreras et al. EUROPEAN POLYMER JOURNAL
- Antibacterial and bioactive coatings on titanium implant surfaces
- (2017) Anupama Kulkarni Aranya et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Preparation of porous titanium materials by powder sintering process and use of space holder technique
- (2017) Xin-sheng Wang et al. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
- Diametral compression behavior of biomedical titanium scaffolds with open, interconnected pores prepared with the space holder method
- (2017) B. Arifvianto et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical properties and biocompatibility of porous titanium scaffolds for bone tissue engineering
- (2017) Yunhui Chen et al. Journal of the Mechanical Behavior of Biomedical Materials
- Tribocorrosion behavior of bio-functionalized highly porous titanium
- (2017) F. Toptan et al. Journal of the Mechanical Behavior of Biomedical Materials
- The effect of pore size and porosity on mechanical properties and biological response of porous titanium scaffolds
- (2017) C. Torres-Sanchez et al. Materials Science & Engineering C-Materials for Biological Applications
- A review of biocompatible metal injection moulding process parameters for biomedical applications
- (2017) M.F.F.A. Hamidi et al. Materials Science & Engineering C-Materials for Biological Applications
- Fabrication and energy absorption properties of titanium foam with CaCl 2 as a space holder
- (2017) B. Xie et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Cervical Spine Injuries: A Whole-Body Musculoskeletal Model for the Analysis of Spinal Loading
- (2017) Dario Cazzola et al. PLoS One
- Stiffness and strength tailoring of cobalt chromium graded cellular structures for stress-shielding reduction
- (2017) Sakkadech Limmahakhun et al. MATERIALS & DESIGN
- Tuning Mesenchymal Stem Cell Response onto Titanium–Niobium–Hafnium Alloy by Recombinant Fibronectin Fragments
- (2016) C. Herranz-Diez et al. ACS Applied Materials & Interfaces
- Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting
- (2016) Y.J. Liu et al. ACTA MATERIALIA
- Multifunctional coatings to simultaneously promote osseointegration and prevent infection of orthopaedic implants
- (2016) Jordan Raphel et al. BIOMATERIALS
- Current advances and future perspectives in extrusion-based bioprinting
- (2016) Ibrahim T. Ozbolat et al. BIOMATERIALS
- Production and characterization of high porosity porous Fe-Cr-C alloys by the space holder leaching technique
- (2016) Da-rong Tian et al. International Journal of Minerals Metallurgy and Materials
- Bioactive macroporous titanium implants highly interconnected
- (2016) Cristina Caparrós et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Modification of titanium surfaces by adding antibiotic-loaded PHB spheres and PEG for biomedical applications
- (2016) Alejandra Rodríguez-Contreras et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Fully porous 3D printed titanium femoral stem to reduce stress-shielding following total hip arthroplasty
- (2016) Sajad Arabnejad et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- Characterization of the porous structures of the green body and sintered biomedical titanium scaffolds with micro-computed tomography
- (2016) B. Arifvianto et al. MATERIALS CHARACTERIZATION
- The effect of pore structure on the mechanical properties of titanium scaffolds
- (2016) Mohammad Khodaei et al. MATERIALS LETTERS
- Fatigue behavior of highly porous titanium produced by powder metallurgy with temporary space holders
- (2016) Sedat Özbilen et al. Materials Science & Engineering C-Materials for Biological Applications
- Evaluation of bone loss in antibacterial coated dental implants: An experimental study in dogs
- (2016) Maria Godoy-Gallardo et al. Materials Science & Engineering C-Materials for Biological Applications
- Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties
- (2016) M. Qian et al. MRS BULLETIN
- Geometry Design Optimization of Functionally Graded Scaffolds for Bone Tissue Engineering: A Mechanobiological Approach
- (2016) Antonio Boccaccio et al. PLoS One
- In vivo testing of porous Ti-25Nb alloy serving as a femoral stem prosthesis in a rabbit model
- (2016) Xiaojun Weng et al. Experimental and Therapeutic Medicine
- Design, processing and characterization of titanium with radial graded porosity for bone implants
- (2016) Y. Torres et al. MATERIALS & DESIGN
- Enhanced osseointegration of titanium implants with nanostructured surfaces: An experimental study in rabbits
- (2015) Laëtitia Salou et al. Acta Biomaterialia
- Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review
- (2015) Lai-Chang Zhang et al. ADVANCED ENGINEERING MATERIALS
- Three-dimensional real structure-based finite element analysis of mechanical behavior for porous titanium manufactured by a space holder method
- (2015) Dong Jun Lee et al. COMPUTATIONAL MATERIALS SCIENCE
- Radiographic Outcomes Following Lateral Column Lengthening With a Porous Titanium Wedge
- (2015) Christopher E. Gross et al. FOOT & ANKLE INTERNATIONAL
- Development of new titanium implants with longitudinal gradient porosity by space-holder technique
- (2015) J. J. Pavón et al. JOURNAL OF MATERIALS SCIENCE
- Porous titanium manufactured by a novel powder tapping method using spherical salt bead space holders: Characterisation and mechanical properties
- (2015) Jiangang Jia et al. Journal of the Mechanical Behavior of Biomedical Materials
- On the influence of space holder in the development of porous titanium implants: Mechanical, computational and biological evaluation
- (2015) S. Muñoz et al. MATERIALS CHARACTERIZATION
- Surface modification of highly porous titanium by plasma treatment
- (2015) N.F. Daudt et al. MATERIALS LETTERS
- The compression behaviors of titanium/carbamide powder mixtures in the preparation of biomedical titanium scaffolds with the space holder method
- (2015) B. Arifvianto et al. POWDER TECHNOLOGY
- Effect of sintering processing on property of porous Ti using space holder technique
- (2015) Bo-qiong LI et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Multi-biofunctionalization of a titanium surface with a mixture of peptides to achieve excellent antimicrobial activity and biocompatibility
- (2015) Wang Lin et al. Journal of Materials Chemistry B
- An investigation of the mechanical behaviour of fine tubes fabricated from a Ti–25Nb–3Mo–3Zr–2Sn alloy
- (2015) Yaowu Zhang et al. MATERIALS & DESIGN
- Development of tantalum scaffold for orthopedic applications produced by space-holder method
- (2015) E. Rupérez et al. MATERIALS & DESIGN
- Comparative Epidemiology of Revision Arthroplasty: Failed THA Poses Greater Clinical and Economic Burdens Than Failed TKA
- (2014) Kevin J. Bozic et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Study of metal injection molding of highly porous titanium by physical modeling and direct experiments
- (2014) Nihan Tuncer et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Mechanical properties and in vitro biological response to porous titanium alloys prepared for use in intervertebral implants
- (2014) C. Caparrós et al. Journal of the Mechanical Behavior of Biomedical Materials
- Space-holder effect on designing pore structure and determining mechanical properties in porous titanium
- (2014) Byounggab Lee et al. MATERIALS & DESIGN
- Titanium foam with coarser cell size and wide range of porosity using different types of evaporative space holders through powder metallurgy route
- (2014) D.P. Mondal et al. MATERIALS & DESIGN
- Fabrication of porous titanium scaffolds by stack sintering of microporous titanium spheres produced with centrifugal granulation technology
- (2014) Hongjie Chen et al. Materials Science & Engineering C-Materials for Biological Applications
- Biocompatibility of Advanced Manufactured Titanium Implants—A Review
- (2014) Alfred Sidambe Materials
- Fabrication of Metallic Biomedical Scaffolds with the Space Holder Method: A Review
- (2014) Budi Arifvianto et al. Materials
- Prepare dispersed CIS nano-scale particles and spray coating CIS absorber layers using nano-scale precursors
- (2014) Jian-Chiun Liou et al. Nanoscale Research Letters
- Development and Applications of Porous Tantalum Trabecular Metal-Enhanced Titanium Dental Implants
- (2013) Sompop Bencharit et al. Clinical Implant Dentistry and Related Research
- Formability and mechanical properties of porous titanium produced by a moldless process
- (2013) Yoshihito Naito et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Trends in Fracture Incidence: A Population-Based Study Over 20 Years
- (2013) Shreyasee Amin et al. JOURNAL OF BONE AND MINERAL RESEARCH
- Titanium foam made with saccharose as a space holder
- (2013) J. Jakubowicz et al. JOURNAL OF POROUS MATERIALS
- Highly porous open cell Ti-foam using NaCl as temporary space holder through powder metallurgy route
- (2013) Nidhi Jha et al. MATERIALS & DESIGN
- Fabrication of porous titanium scaffold with controlled porous structure and net-shape using magnesium as spacer
- (2013) Sung Won Kim et al. Materials Science & Engineering C-Materials for Biological Applications
- Specific surface area of titanium dioxide (TiO2) particles influences cyto- and photo-toxicity
- (2013) Sijing Xiong et al. TOXICOLOGY
- Effect of sintering neck on compressive mechanical properties of porous titanium
- (2013) Chun-ming ZOU et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Effects of type I collagen coating on titanium osseointegration: histomorphometric, cellular and molecular analyses
- (2012) Alexander Tadeu Sverzut et al. Biomedical Materials
- Metal injection moulding of CP-Ti components for biomedical applications
- (2012) A.T. Sidambe et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Processing and characterization of porous titanium for implants by using NaCl as space holder
- (2012) Y. Torres et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Mechanical behaviour of pressed and sintered titanium alloys obtained from prealloyed and blended elemental powders
- (2012) L. Bolzoni et al. Journal of the Mechanical Behavior of Biomedical Materials
- Processing and mechanical properties of porous Ti–7.5Mo alloy
- (2012) Hsueh-Chuan Hsu et al. MATERIALS & DESIGN
- Porous c.p. Titanium Using Dextrin as Space Holder for Endosseous Implants
- (2012) Ionut Gligor et al. PARTICULATE SCIENCE AND TECHNOLOGY
- Rapid Generation of Multiplexed Cell Cocultures Using Acoustic Droplet Ejection Followed by Aqueous Two-Phase Exclusion Patterning
- (2012) Yu Fang et al. TISSUE ENGINEERING PART C-METHODS
- Recent advances in bone tissue engineering scaffolds
- (2012) Susmita Bose et al. TRENDS IN BIOTECHNOLOGY
- Bioresorbable Plates and Screws for Clinical Applications: A Review
- (2012) Sandra Pina et al. Journal of Healthcare Engineering
- Overview of current additive manufacturing technologies and selected applications
- (2012) Timothy J. Horn et al. SCIENCE PROGRESS
- Processing titanium foams using tapioca starch as a space holder
- (2011) Amirhossein Mansourighasri et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Titanium foam through powder metallurgy route using acicular urea particles as space holder
- (2011) M. Sharma et al. MATERIALS LETTERS
- The effect of Si additions on the sintering and sintered microstructure and mechanical properties of Ti–3Ni alloy
- (2011) Y.F. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Characterization of Ti–6Al–4V alloy foams synthesized by space holder technique
- (2011) Ziya Esen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Investigation of spacer size effect on architecture and mechanical properties of porous titanium
- (2011) Nihan Tuncer et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Conventional Powder Metallurgy Process and Characterization of Porous Titanium for Biomedical Applications
- (2011) Y. Torres et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Porous tantalum structures for bone implants: Fabrication, mechanical and in vitro biological properties
- (2010) Vamsi Krishna Balla et al. Acta Biomaterialia
- Surface morphology optimization for osseointegration of coated implants
- (2010) Chaiy Rungsiyakull et al. BIOMATERIALS
- Laser assisted bioprinting of engineered tissue with high cell density and microscale organization
- (2010) Bertrand Guillotin et al. BIOMATERIALS
- Biofunctionalization of titanium implants with a biomimetic active peptide (P-15) promotes early osseointegration
- (2010) R. Lutz et al. CLINICAL ORAL IMPLANTS RESEARCH
- Highly porous titanium scaffolds for orthopaedic applications
- (2010) Bogdan Dabrowski et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Konventionelle Plattenosteosynthese
- (2010) K. Klaue ORTHOPADE
- The Correlation Between the Internal Structure and Vascularization of Controllable Porous Bioceramic Materials In Vivo: A Quantitative Study
- (2010) Feng Bai et al. TISSUE ENGINEERING PART A
- Porous titanium for biomedical applications: An experimental study on rabbits
- (2010) LM. Vasconcellos et al. Medicina Oral Patologia Oral y Cirugia Bucal
- Porous TiNbZr alloy scaffolds for biomedical applications
- (2009) Xiaojian Wang et al. Acta Biomaterialia
- The importance of particle size in porous titanium and nonporous counterparts for surface energy and its impact on apatite formation
- (2009) Xiao-Bo Chen et al. Acta Biomaterialia
- The effect of mean pore size on cell attachment, proliferation and migration in collagen–glycosaminoglycan scaffolds for bone tissue engineering
- (2009) Ciara M. Murphy et al. BIOMATERIALS
- Efficacy of a bioactive glassâceramic (Biosilicate®) in the maintenance of alveolar ridges and in osseointegration of titanium implants
- (2009) VirgÃlio M. Roriz et al. CLINICAL ORAL IMPLANTS RESEARCH
- Human cortical bone: the SiNuPrOs model. Part II – a multi-scale study of permeability
- (2009) M. Predoi-Racila et al. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING
- Effects of replacing metal powder with powder space holder on metal foam produced by metal injection moulding
- (2009) A. Manonukul et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Designing compressive properties of titanium foams
- (2009) Nihan Tuncer et al. JOURNAL OF MATERIALS SCIENCE
- Porous titanium scaffolds produced by powder metallurgy for biomedical applications
- (2009) Luana Marotta Reis de Vasconcellos et al. Materials Research-Ibero-american Journal of Materials
- Porous titanium implants fabricated by metal injection molding
- (2009) Liang-jian CHEN et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Metallic Scaffolds for Bone Regeneration
- (2009) Kelly Alvarez et al. Materials
- Porous Titanium by Electro-chemical Dissolution of Steel Space-holders
- (2008) P. J. Kwok et al. ADVANCED ENGINEERING MATERIALS
- A review of rapid prototyping techniques for tissue engineering purposes
- (2008) Sanna M. Peltola et al. ANNALS OF MEDICINE
- Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique
- (2008) Garrett E. Ryan et al. BIOMATERIALS
- The correlation of pore morphology, interconnectivity and physical properties of 3D ceramic scaffolds with bone ingrowth
- (2008) Anthony C. Jones et al. BIOMATERIALS
- Space-holder engineered porous NiTi shape memory alloys with improved pore characteristics and mechanical properties
- (2008) D.S. Li et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Chromium, cobalt and titanium metallosis involving a Nottingham shoulder replacement
- (2008) W. S. Khan et al. JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME
- Processing and compression testing of Ti6Al4V foams for biomedical applications
- (2008) M. E. Dizlek et al. JOURNAL OF MATERIALS SCIENCE
- Experiment study on fracture fixation with low rigidity titanium alloy
- (2008) Nozomu Sumitomo et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Processing and mechanical properties of magnesium foams
- (2008) Gang Ling Hao et al. JOURNAL OF POROUS MATERIALS
- Processing and properties of porous titanium using space holder technique
- (2008) Wenjuan Niu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
- (2008) M. Geetha et al. PROGRESS IN MATERIALS SCIENCE
- Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing
- (2007) Rachel E. Saunders et al. BIOMATERIALS
- Should the galvanic combination of titanium and stainless steel surgical implants be avoided?
- (2007) Paul Johan Høl et al. INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED
- Properties of solid core and porous surface Ti–6Al–4V implants manufactured by powder metallurgy
- (2007) Montasser M. Dewidar et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effects of compaction pressure and particle shape on the porosity and compression mechanical properties of sintered Ti6Al4V powder compacts for hard tissue implantation
- (2007) Mustafa Güden et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now