Carbon Fibers Enhance the Propagation of High Loading Nanothermites: In Situ Observation of Microscopic Combustion

Connecting agglomeration and burn rate in a thermite reaction: Role of oxidizer morphology

(2021) Haiyang Wang et al.   COMBUSTION AND FLAME

Nanomaterial Patterning in 3D Printing

(2020) Brian Elder et al.   ADVANCED MATERIALS

Probing the reaction mechanism of Al/CuO nanocomposites doped with ammonium perchlorate

(2020) Cheng-ai Wang et al.   NANOTECHNOLOGY

Combustion of 3D printed 90 wt% loading reinforced nanothermite

(2020) Jinpeng Shen et al.   COMBUSTION AND FLAME

Experimental observation of the heat transfer mechanisms that drive propagation in additively manufactured energetic materials

(2020) Dylan J. Kline et al.   COMBUSTION AND FLAME

Development and Characterization of a Photopolymeric Binder for Additively Manufactured Composite Solid Propellant Using Vibration Assisted Printing

(2020) Monique S. McClain et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

Core–Shell Structured Nanoenergetic Materials: Preparation and Fundamental Properties

(2020) Xiaoxia Ma et al.   ADVANCED MATERIALS

Functionalized carbon fibers assembly with Al/Bi2O3: A new strategy for high-reliability ignition

(2020) Zhenxin Yi et al.   CHEMICAL ENGINEERING JOURNAL

Combustion Characteristics of Fluoropolymer Coated Boron Powders

(2020) Venu Keerthi et al.   COMBUSTION SCIENCE AND TECHNOLOGY

Microstructure and ignition mechanisms of reactive aluminum–zirconium ball milled composite metal powders as a function of particle size

(2020) Elliot R. Wainwright et al.   JOURNAL OF MATERIALS SCIENCE

Enhancing combustion performance of nano-Al/PVDF composites with β-PVDF

(2020) Sidi Huang et al.   COMBUSTION AND FLAME

Agglomeration and combustion characteristics of solid composite propellants containing aluminum-based alloys

(2020) Wen Ao et al.   COMBUSTION AND FLAME

Combustion behavior of AP/HTPB/Al composite propellant containing hydroborate iron compound

(2020) Wei-Qiang Pang et al.   COMBUSTION AND FLAME

Numerically evaluating energetic composite flame propagation with thermally conductive, high aspect ratio fillers

(2020) Miles C. Rehwoldt et al.   CHEMICAL ENGINEERING SCIENCE

Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites

(2019) Haiyang Wang et al.   COMBUSTION AND FLAME

Active Mixing of Reactive Materials for 3D Printing

(2019) Alexandra M. Golobic et al.   ADVANCED ENGINEERING MATERIALS

Direct Writing of a 90 wt% Particle Loading Nanothermite

(2019) Haiyang Wang et al.   ADVANCED MATERIALS

Electrospinning Preparation of NC/GAP/Submicron-HNS Energetic Composite Fiber and its Properties

(2019) Yi Wang et al.   ACS Omega

On the combustion of heterogeneous AP/HTPB composite propellants: A review

(2019) Claresta Dennis et al.   FUEL

Effects of Aluminum and Temperature on the Tensile Mechanical Properties of Lithium‐Perchlorate/Polyvinyl Alcohol‐Based Electrically Controlled Solid Propellants

(2019) Zhicheng He et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

Microspheres with Diverse Material Compositions Can be Prepared by Mechanical Milling

(2019) Mehnaz Mursalat et al.   ADVANCED ENGINEERING MATERIALS

Preparation of B/Nitrocellulose/Fe particles and their effect on the performance of an ammonium perchlorate propellant

(2019) Long Cheng et al.   COMBUSTION AND FLAME

Ignition and combustion analysis of direct write fabricated aluminum/metal oxide/PVDF films

(2019) Miles C. Rehwoldt et al.   COMBUSTION AND FLAME

Evaluating compositional effects on the laser-induced combustion and shock velocities of Al/Zr-based composite fuels

(2019) Elliot R. Wainwright et al.   COMBUSTION AND FLAME

High speed 2-dimensional temperature measurements of nanothermite composites: Probing thermal vs. Gas generation effects

(2018) Rohit J. Jacob et al.   JOURNAL OF APPLIED PHYSICS

Additive manufacturing of ammonium perchlorate composite propellant with high solids loadings

(2018) M.S. McClain et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Binder melt: Quantification using SEM/EDS and its effects on composite solid propellant combustion

(2018) Kumar Nagendra et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Influence of Carbon Nanofibers on Thermal and Mechanical Properties of NC-TEGDN-RDX Triple-Base Gun Propellants

(2018) Jinpeng Shen et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

Nanothermites: A short Review. Factsheet for Experimenters, Present and Future Challenges

(2018) Marc Comet et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

The Effects of Confinement on the Fracturing Performance of Printed Nanothermites

(2018) Eric R. Westphal et al.   PROPELLANTS EXPLOSIVES PYROTECHNICS

Tailoring burning rates using reactive wires in composite solid rocket propellants

(2017) Sarah Isert et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Metal-based nanoenergetic materials: Synthesis, properties, and applications

(2017) Dilip Sundaram et al.   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

3D-Printing of Meso-structurally Ordered Carbon Fiber/Polymer Composites with Unprecedented Orthotropic Physical Properties

(2017) James P. Lewicki et al.   Scientific Reports

Metal-Organic Framework Templated Synthesis of Copper Azide as the Primary Explosive with Low Electrostatic Sensitivity and Excellent Initiation Ability

(2016) Qianyou Wang et al.   ADVANCED MATERIALS

Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing

(2016) Nanya Li et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Energetic nanocomposites for detonation initiation in high explosives without primary explosives

(2015) Marc Comet et al.   APPLIED PHYSICS LETTERS

Electrospray Deposition of Energetic Polymer Nanocomposites with High Mass Particle Loadings: A Prelude to 3D Printing of Rocket Motors

(2014) Chuan Huang et al.   ADVANCED ENGINEERING MATERIALS

Do nanoenergetic particles remain nano-sized during combustion?

(2014) Purnendu Chakraborty et al.   COMBUSTION AND FLAME

Highly oriented carbon fiber–polymer composites via additive manufacturing

(2014) Halil L. Tekinalp et al.   COMPOSITES SCIENCE AND TECHNOLOGY

The importance of carbon fiber to polymer additive manufacturing

(2014) Lonnie J. Love et al.   JOURNAL OF MATERIALS RESEARCH

Combustion characteristics of high-energy Al/CuO composite powders: The role of oxidizer structure and pellet density

(2013) Ji Young Ahn et al.   POWDER TECHNOLOGY

Thermal conductivity and dielectric properties of Al/PVDF composites

(2012) Wenying Zhou et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Combustion characteristics of novel hybrid nanoenergetic formulations

(2011) Rajagopalan Thiruvengadathan et al.   COMBUSTION AND FLAME

Reduced-Sensitivity Nanothermites Containing Manganese Oxide Filled Carbon Nanofibers

(2010) Benny Siegert et al.   Journal of Physical Chemistry C

Effect of Bulk Density on Reaction Propagation in Nanothermites and Micron Thermites

(2009) Michelle L. Pantoya et al.   JOURNAL OF PROPULSION AND POWER

Thermal conductivity enhancement of carbon fiber composites

(2008) Moran Wang et al.   APPLIED THERMAL ENGINEERING

Thermal properties of carbon fibers at very high temperature

(2008) C. Pradere et al.   CARBON