标题
Nanomaterial Patterning in 3D Printing
作者
关键词
-
出版物
ADVANCED MATERIALS
Volume -, Issue -, Pages 1907142
出版商
Wiley
发表日期
2020-03-04
DOI
10.1002/adma.201907142
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Freeze-Casting of Surface-Magnetized Iron(II,III) Oxide Particles in a Uniform Static Magnetic Field Generated by a Helmholtz Coil
- (2019) Isaac Nelson et al. ADVANCED ENGINEERING MATERIALS
- Three-dimensional printing of piezoelectric materials with designed anisotropy and directional response
- (2019) Huachen Cui et al. NATURE MATERIALS
- Intrinsic and extrinsic control of freeze casting
- (2019) Isaac Nelson et al. Journal of Materials Research and Technology-JMR&T
- Rheological Issues in Carbon-Based Inks for Additive Manufacturing
- (2019) Charlie O’Mahony et al. Micromachines
- Multimaterial actinic spatial control 3D and 4D printing
- (2019) J. J. Schwartz et al. Nature Communications
- Droplet-jet mode near-field electrospinning for controlled helix patterns with sub-10 µm coiling diameter
- (2019) Dongwoon Shin et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- Electrical and mechanical tuning of 3D printed photopolymer–MWCNT nanocomposites through in situ dispersion
- (2019) Luis A. Chavez et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Optical Nanoprinting of Colloidal Particles and Functional Structures
- (2019) Jingang Li et al. ACS Nano
- Direct Writing of a 90 wt% Particle Loading Nanothermite
- (2019) Haiyang Wang et al. ADVANCED MATERIALS
- 3D printed cellulose nanocrystal composites through digital light processing
- (2019) Vincent Chi-Fung Li et al. CELLULOSE
- New Perspective of Mitigating the Coffee-Ring Effect: Interfacial Assembly
- (2019) Karam Nashwan Al-Milaji et al. Journal of Physical Chemistry C
- Acoustic tweezers
- (2019) Long Meng et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Multi-metal electrohydrodynamic redox 3D printing at the submicron scale
- (2019) Alain Reiser et al. Nature Communications
- Electrically assisted 3D printing of nacre-inspired structures with self-sensing capability
- (2019) Yang Yang et al. Science Advances
- Dynamic Photomask-Assisted Direct Ink Writing Multimaterial for Multilevel Triboelectric Nanogenerator
- (2019) Kaijuan Chen et al. ADVANCED FUNCTIONAL MATERIALS
- Inkjet-printed stretchable and low voltage synaptic transistor array
- (2019) F. Molina-Lopez et al. Nature Communications
- Perovskite nanowire–block copolymer composites with digitally programmable polarization anisotropy
- (2019) Nanjia Zhou et al. Science Advances
- Printing of Hydrophobic Materials in Fumed Silica Nanoparticle Suspension
- (2019) Yifei Jin et al. ACS Applied Materials & Interfaces
- Additive Manufacturing of Precision Biomaterials
- (2019) Elia A. Guzzi et al. ADVANCED MATERIALS
- Bilayer polymer solar cells prepared with transfer printing of active layers from controlled swelling/de-swelling of PDMS
- (2019) Anisha Mohapatra et al. Nano Energy
- Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels
- (2019) Mark A. Skylar-Scott et al. Science Advances
- Mechanical properties and energy absorption of 3D printed square hierarchical honeycombs under in-plane axial compression
- (2019) Yong Tao et al. COMPOSITES PART B-ENGINEERING
- Universal Nanocarrier Ink Platform for Biomaterials Additive Manufacturing
- (2019) Elia A. Guzzi et al. Small
- Three-Dimensional Printing Hollow Polymer Template-Mediated Graphene Lattices with Tailorable Architectures and Multifunctional Properties
- (2018) Qiangqiang Zhang et al. ACS Nano
- Dynamics of Cellulose Nanocrystal Alignment during 3D Printing
- (2018) Michael K. Hausmann et al. ACS Nano
- 3D Printing of Materials with Tunable Failure via Bioinspired Mechanical Gradients
- (2018) Dimitri Kokkinis et al. ADVANCED MATERIALS
- Recent Progress in Biomimetic Additive Manufacturing Technology: From Materials to Functional Structures
- (2018) Yang Yang et al. ADVANCED MATERIALS
- Microfluidics-Enabled Multimaterial Maskless Stereolithographic Bioprinting
- (2018) Amir K. Miri et al. ADVANCED MATERIALS
- A review on suppression and utilization of the coffee-ring effect
- (2018) Dileep Mampallil et al. ADVANCES IN COLLOID AND INTERFACE SCIENCE
- Patternable fabrication of hyper-hierarchical metal surface structures for ultrabroadband antireflection and self-cleaning
- (2018) Peixun Fan et al. APPLIED SURFACE SCIENCE
- Hydrodynamic properties of biomimetic shark skin: effect of denticle size and swimming speed
- (2018) August Domel et al. Bioinspiration & Biomimetics
- Vibrationally directed assembly of micro- and nanoparticle-polymer composites
- (2018) Soheila Shabaniverki et al. CHEMICAL ENGINEERING SCIENCE
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- Dual-band plasmonic perfect absorber based on all-metal nanostructure for refractive index sensing application
- (2018) Yongzhi Cheng et al. MATERIALS LETTERS
- The Limits of Primary Radiation Forces in Bulk Acoustic Standing Waves for Concentrating Nanoparticles
- (2018) Christopher Reyes et al. PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION
- Freeze casting – A review of processing, microstructure and properties via the open data repository, FreezeCasting.net
- (2018) Kristen L. Scotti et al. PROGRESS IN MATERIALS SCIENCE
- A bioinspired flexible organic artificial afferent nerve
- (2018) Yeongin Kim et al. SCIENCE
- Additive manufacturing of 3D nano-architected metals
- (2018) Andrey Vyatskikh et al. Nature Communications
- Addressing Unmet Clinical Needs with 3D Printing Technologies
- (2018) Udayan Ghosh et al. Advanced Healthcare Materials
- Interfacial Self-Assembly of Colloidal Nanoparticles in Dual-Droplet Inkjet Printing
- (2018) Karam Nashwan Al-Milaji et al. Advanced Materials Interfaces
- Chaotic printing: using chaos to fabricate densely packed micro- and nanostructures at high resolution and speed
- (2018) Grissel Trujillo-de Santiago et al. Materials Horizons
- A novel 6-axis hybrid additive-subtractive manufacturing process: Design and case studies
- (2018) Lin Li et al. Journal of Manufacturing Processes
- Multilayered metal-dielectric film structure for highly efficient solar selective absorption
- (2018) Er-Tao Hu et al. Materials Research Express
- Acoustic Field-Assisted Particle Patterning for Smart Polymer Composite Fabrication in Stereolithography
- (2018) Lu Lu et al. 3D Printing and Additive Manufacturing
- 3D printing of soft robotic systems
- (2018) T. J. Wallin et al. Nature Reviews Materials
- Direct-Write Freeform Colloidal Assembly
- (2018) Alvin T. L. Tan et al. ADVANCED MATERIALS
- Recent developments in bio-monitoring via advanced polymer nanocomposite-based wearable strain sensors
- (2018) Yang Lu et al. BIOSENSORS & BIOELECTRONICS
- Ultrasound directed self-assembly processing of nanocomposite materials with ultra-high carbon nanotube weight fraction
- (2018) J Greenhall et al. JOURNAL OF COMPOSITE MATERIALS
- Three-dimensional printing of hierarchical liquid-crystal-polymer structures
- (2018) Silvan Gantenbein et al. NATURE
- Printing ferromagnetic domains for untethered fast-transforming soft materials
- (2018) Yoonho Kim et al. NATURE
- Electromechanical modeling and experimental verification of a direct write nanocomposite
- (2018) Alireza Nafari et al. Smart Materials and Structures
- Heterogeneous microoptical structures with sub-micrometer precision
- (2018) Sönke Steenhusen et al. THIN SOLID FILMS
- Additive manufacturing of complex micro-architected graphene aerogels
- (2018) Ryan M. Hensleigh et al. Materials Horizons
- Exploitation of Cationic Silica Nanoparticles for Bioprinting of Large-Scale Constructs with High Printing Fidelity
- (2018) Mihyun Lee et al. ACS Applied Materials & Interfaces
- 3D Printing in Zero G Technology Demonstration Mission: complete experimental results and summary of related material modeling efforts
- (2018) Tracie Prater et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Acoustic tweezers for the life sciences
- (2018) Adem Ozcelik et al. NATURE METHODS
- Experimental study on jet impact speed in near-field electrospinning for precise patterning of nanofiber
- (2018) Dongwoon Shin et al. Journal of Manufacturing Processes
- 3D‐Printed Gastric Resident Electronics
- (2018) Yong Lin Kong et al. Advanced Materials Technologies
- Directed assembly of nanoparticles into continuous microstructures by standing surface acoustic waves
- (2018) Haim Sazan et al. JOURNAL OF COLLOID AND INTERFACE SCIENCE
- Magnetic-Field-Assisted Projection Stereolithography for Three-Dimensional Printing of Smart Structures
- (2017) Lu Lu et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Continuous micro-vortex-based nanoparticle manipulation via focused surface acoustic waves
- (2017) David J. Collins et al. LAB ON A CHIP
- 3D Printing of Polymer Nanocomposites via Stereolithography
- (2017) Jill Z. Manapat et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Self-Assembly in Block Copolymer Thin Films upon Solvent Evaporation: A Simulation Study
- (2017) Jinlong Hao et al. MACROMOLECULES
- Stiff, porous scaffolds from magnetized alumina particles aligned by magnetic freeze casting
- (2017) Michael B. Frank et al. Materials Science & Engineering C-Materials for Biological Applications
- Two-photon polymerization for biological applications
- (2017) Alexander K. Nguyen et al. Materials Today
- Nanowire enhanced dimensional accuracy in acrylate resin-based 3D printing
- (2017) Yanyang Han et al. NEW JOURNAL OF CHEMISTRY
- Mechanisms of ovipositor insertion and steering of a parasitic wasp
- (2017) Uroš Cerkvenik et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Isolation of exosomes from whole blood by integrating acoustics and microfluidics
- (2017) Mengxi Wu et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Gradient metasurfaces: a review of fundamentals and applications
- (2017) Fei Ding et al. REPORTS ON PROGRESS IN PHYSICS
- In situ expansion of engineered human liver tissue in a mouse model of chronic liver disease
- (2017) Kelly R. Stevens et al. Science Translational Medicine
- Investigation of pyroelectric fields generated by lithium niobate crystals through integrated microheaters
- (2017) S. Bhowmick et al. SENSORS AND ACTUATORS A-PHYSICAL
- Multicellular Biohybrid Materials: Probing the Interplay of Cells of Different Types Precisely Positioned and Constrained on 3D Wireframe-Like Microstructures
- (2017) Maurizio R. Gullo et al. Advanced Healthcare Materials
- Large-Scale Rapid Liquid Printing
- (2017) Kathleen Hajash et al. 3D Printing and Additive Manufacturing
- Biocompatibility of Photopolymers in 3D Printing
- (2017) Frank Alifui-Segbaya et al. 3D Printing and Additive Manufacturing
- Printing, folding and assembly methods for forming 3D mesostructures in advanced materials
- (2017) Yihui Zhang et al. Nature Reviews Materials
- Three-dimensional microarchitected materials and devices using nanoparticle assembly by pointwise spatial printing
- (2017) Mohammad Sadeq Saleh et al. Science Advances
- One-step volumetric additive manufacturing of complex polymer structures
- (2017) Maxim Shusteff et al. Science Advances
- Suspension 3D Printing of Liquid Metal into Self-Healing Hydrogel
- (2017) Yongze Yu et al. Advanced Materials Technologies
- Prolonged energy harvesting for ingestible devices
- (2017) Phillip Nadeau et al. Nature Biomedical Engineering
- Correlation between particle size/domain structure and magnetic properties of highly crystalline Fe3O4 nanoparticles
- (2017) Qing Li et al. Scientific Reports
- Tunable Surface and Matrix Chemistries in Optically Printed (0–3) Piezoelectric Nanocomposites
- (2016) Kanguk Kim et al. ACS Applied Materials & Interfaces
- Coffee-Ring-Free Quantum Dot Thin Film Using Inkjet Printing from a Mixed-Solvent System on Modified ZnO Transport Layer for Light-Emitting Devices
- (2016) Congbiao Jiang et al. ACS Applied Materials & Interfaces
- High-Operating-Temperature Direct Ink Writing of Mesoscale Eutectic Architectures
- (2016) J. William Boley et al. ADVANCED MATERIALS
- Integration of Organic Electrochemical and Field-Effect Transistors for Ultraflexible, High Temporal Resolution Electrophysiology Arrays
- (2016) Wonryung Lee et al. ADVANCED MATERIALS
- Advanced Bioinks for 3D Printing: A Materials Science Perspective
- (2016) David Chimene et al. ANNALS OF BIOMEDICAL ENGINEERING
- Ultrasound directed self-assembly of user-specified patterns of nanoparticles dispersed in a fluid medium
- (2016) J. Greenhall et al. APPLIED PHYSICS LETTERS
- Modeling the self-assembly of nanoparticles into branched aggregates from a sessile nanofluid droplet
- (2016) H. Zhang et al. APPLIED THERMAL ENGINEERING
- Surface microstructuring to modify wettability for 3D printing of nano-filled inks
- (2016) Saeid Vafaei et al. CHEMICAL ENGINEERING RESEARCH & DESIGN
- 3D printing with polymers: Challenges among expanding options and opportunities
- (2016) Jeffrey W. Stansbury et al. DENTAL MATERIALS
- Contactless magnetic manipulation of magnetic particles in a fluid
- (2016) S. Tokura et al. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
- Frontiers of 3D Printing/Additive Manufacturing: from Human Organs to Aircraft Fabrication†
- (2016) Lawrence E. Murr JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- 3D printed nervous system on a chip
- (2016) Blake N. Johnson et al. LAB ON A CHIP
- 3D printed bionic nanodevices
- (2016) Yong Lin Kong et al. Nano Today
- N-Doped graphene frameworks with superhigh surface area: excellent electrocatalytic performance for oxygen reduction
- (2016) H. J. Cui et al. Nanoscale
- Shear induced alignment of short nanofibers in 3D printed polymer composites
- (2016) Doruk Erdem Yunus et al. NANOTECHNOLOGY
- Printing soft matter in three dimensions
- (2016) Ryan L. Truby et al. NATURE
- The rise of plastic bioelectronics
- (2016) Takao Someya et al. NATURE
- Multiscale metallic metamaterials
- (2016) Xiaoyu Zheng et al. NATURE MATERIALS
- Biomimetic 4D printing
- (2016) A. Sydney Gladman et al. NATURE MATERIALS
- Two-photon direct laser writing of ultracompact multi-lens objectives
- (2016) Timo Gissibl et al. Nature Photonics
- Effect of the Polydispersity of a Colloidal Drop on Drying Induced Stress as Measured by the Buckling of a Floating Sheet
- (2016) François Boulogne et al. PHYSICAL REVIEW LETTERS
- Additive manufacturing of carbon nanotube-photopolymer composite radar absorbing materials
- (2016) Yuanyuan Zhang et al. POLYMER COMPOSITES
- Layerless fabrication with continuous liquid interface production
- (2016) Rima Janusziewicz et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- 3D Printing of Graphene Aerogels
- (2016) Qiangqiang Zhang et al. Small
- 3D printed components with ultrasonically arranged microscale structure
- (2016) Thomas M Llewellyn-Jones et al. Smart Materials and Structures
- Design optimization of ink in electrohydrodynamic jet printing: Effect of viscoelasticity on the formation of Taylor cone jet
- (2016) Milim Yu et al. MATERIALS & DESIGN
- Tailoring film agglomeration for preparation of silver nanoparticles with controlled morphology
- (2016) Yiming Bai et al. MATERIALS & DESIGN
- Structure, biomimetics, and fluid dynamics of fish skin surfaces
- (2016) George V. Lauder et al. Physical Review Fluids
- Organic core-sheath nanowire artificial synapses with femtojoule energy consumption
- (2016) W. Xu et al. Science Advances
- Open-Source Selective Laser Sintering (OpenSLS) of Nylon and Biocompatible Polycaprolactone
- (2016) Ian S. Kinstlinger et al. PLoS One
- Toward Contactless Biology: Acoustophoretic DNA Transfection
- (2016) Thomas Vasileiou et al. Scientific Reports
- Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach
- (2015) Janet R. Xavier et al. ACS Nano
- Three-Dimensional Printing of High-Content Graphene Scaffolds for Electronic and Biomedical Applications
- (2015) Adam E. Jakus et al. ACS Nano
- 3D Printed Anatomical Nerve Regeneration Pathways
- (2015) Blake N. Johnson et al. ADVANCED FUNCTIONAL MATERIALS
- Template-Directed Directionally Solidified 3D Mesostructured AgCl-KCl Eutectic Photonic Crystals
- (2015) Jinwoo Kim et al. ADVANCED MATERIALS
- High-Resolution Printing of 3D Structures Using an Electrohydrodynamic Inkjet with Multiple Functional Inks
- (2015) Byeong Wan An et al. ADVANCED MATERIALS
- Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
- (2015) James O. Hardin et al. ADVANCED MATERIALS
- A sound idea: Manipulating domain walls in magnetic nanowires using surface acoustic waves
- (2015) J. Dean et al. APPLIED PHYSICS LETTERS
- Characterization of particulate matters and total VOC emissions from a binder jetting 3D printer
- (2015) Nima Afshar-Mohajer et al. BUILDING AND ENVIRONMENT
- One-step reconstruction with a 3D-printed, biomechanically evaluated custom implant after complex pelvic tumor resection
- (2015) K. C. Wong et al. Computer Aided Surgery
- Ten challenges in 3D printing
- (2015) William Oropallo et al. ENGINEERING WITH COMPUTERS
- High speed electrospinning for scaled-up production of amorphous solid dispersion of itraconazole
- (2015) Zsombor K. Nagy et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Mechanical Response of Hollow Metallic Nanolattices: Combining Structural and Material Size Effects
- (2015) L. C. Montemayor et al. JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME
- Deposition of Quantum Dots in a Capillary Tube
- (2015) Yong Lin Kong et al. LANGMUIR
- 3D Printed Programmable Release Capsules
- (2015) Maneesh K. Gupta et al. NANO LETTERS
- Biomimicry at the nanoscale: current research and perspectives of two-photon polymerization
- (2015) Attilio Marino et al. Nanoscale
- Memory on the racetrack
- (2015) Stuart Parkin et al. Nature Nanotechnology
- Continuous liquid interface production of 3D objects
- (2015) J. R. Tumbleston et al. SCIENCE
- Mitigation of tracheobronchomalacia with 3D-printed personalized medical devices in pediatric patients
- (2015) Robert J. Morrison et al. Science Translational Medicine
- Multimaterial magnetically assisted 3D printing of composite materials
- (2015) Dimitri Kokkinis et al. Nature Communications
- Holographic acoustic elements for manipulation of levitated objects
- (2015) Asier Marzo et al. Nature Communications
- Designing bioinspired composite reinforcement architectures via 3D magnetic printing
- (2015) Joshua J. Martin et al. Nature Communications
- Molecular origin of contact line stick-slip motion during droplet evaporation
- (2015) FengChao Wang et al. Scientific Reports
- Macroporous free-standing nano-sulfur/reduced graphene oxide paper as stable cathode for lithium-sulfur battery
- (2015) Chao Wang et al. Nano Energy
- Writing in the granular gel medium
- (2015) T. Bhattacharjee et al. Science Advances
- Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels
- (2015) T. J. Hinton et al. Science Advances
- 3D Optical Printing of Piezoelectric Nanoparticle–Polymer Composite Materials
- (2014) Kanguk Kim et al. ACS Nano
- The Osteoprint: A bioinspired two-photon polymerized 3-D structure for the enhancement of bone-like cell differentiation
- (2014) Attilio Marino et al. Acta Biomaterialia
- Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
- (2014) Joseph T. Muth et al. ADVANCED MATERIALS
- 3D Printing of Reduced Graphene Oxide Nanowires
- (2014) Jung Hyun Kim et al. ADVANCED MATERIALS
- Controllable Printing Droplets for High-Resolution Patterns
- (2014) Minxuan Kuang et al. ADVANCED MATERIALS
- 3D Bioprinting of Vascularized, Heterogeneous Cell-Laden Tissue Constructs
- (2014) David B. Kolesky et al. ADVANCED MATERIALS
- Structural origins of morphing in plant tissues
- (2014) Benny Bar-On et al. APPLIED PHYSICS LETTERS
- Bioactive nanoparticles stimulate bone tissue formation in bioprinted three-dimensional scaffold and human mesenchymal stem cells
- (2014) Guifang Gao et al. Biotechnology Journal
- Aligning carbon nanotubes using bulk acoustic waves to reinforce polymer composites
- (2014) Michael D. Haslam et al. COMPOSITES PART B-ENGINEERING
- 3D printing of MRI compatible components: Why every MRI research group should have a low-budget 3D printer
- (2014) Karl-Heinz Herrmann et al. MEDICAL ENGINEERING & PHYSICS
- 3D Printed Quantum Dot Light-Emitting Diodes
- (2014) Yong Lin Kong et al. NANO LETTERS
- Acoustic force spectroscopy
- (2014) Gerrit Sitters et al. NATURE METHODS
- Optimal Fractal-Like Hierarchical Honeycombs
- (2014) Ramin Oftadeh et al. PHYSICAL REVIEW LETTERS
- Temperature- and pH-Sensitive Nanohydrogels of Poly(N-Isopropylacrylamide) for Food Packaging Applications: Modelling the Swelling-Collapse Behaviour
- (2014) Clara Fuciños et al. PLoS One
- Ultralight, ultrastiff mechanical metamaterials
- (2014) X. Zheng et al. SCIENCE
- A method for building self-folding machines
- (2014) S. Felton et al. SCIENCE
- Conductive Nanomaterials for Printed Electronics
- (2014) Alexander Kamyshny et al. Small
- Direct Alignment and Patterning of Silver Nanowires by Electrohydrodynamic Jet Printing
- (2014) Hyungdong Lee et al. Small
- Bio-inspired detoxification using 3D-printed hydrogel nanocomposites
- (2014) Maling Gou et al. Nature Communications
- All-printable band-edge modulated ZnO nanowire photodetectors with ultra-high detectivity
- (2014) Xi Liu et al. Nature Communications
- Optimization of Aerosol Jet Printing for High-Resolution, High-Aspect Ratio Silver Lines
- (2013) Ankit Mahajan et al. ACS Applied Materials & Interfaces
- Macroscopic Highly Aligned DNA Nanowires Created by Controlled Evaporative Self-Assembly
- (2013) Bo Li et al. ACS Nano
- Carbon-Nanotube-Embedded Hydrogel Sheets for Engineering Cardiac Constructs and Bioactuators
- (2013) Su Ryon Shin et al. ACS Nano
- Transport and deposition patterns in drying sessile droplets
- (2013) Ronald G. Larson AICHE JOURNAL
- Nanocomposite hydrogels for biomedical applications
- (2013) Akhilesh K. Gaharwar et al. BIOTECHNOLOGY AND BIOENGINEERING
- Magnetically Actuated Soft Capsule With the Multimodal Drug Release Function
- (2013) Sehyuk Yim et al. IEEE-ASME TRANSACTIONS ON MECHATRONICS
- Flow-induced morphology evolution of uniformly miniaturized high-density polyethylene parts prepared by micro-injection molding
- (2013) Can Yang INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Additive manufacturing: A framework for implementation
- (2013) Stephen Mellor et al. INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS
- Effect of Surfactant on the Drying Patterns of Graphite Nanofluid Droplets
- (2013) Alexandru Crivoi et al. JOURNAL OF PHYSICAL CHEMISTRY B
- New polaritonic materials in the THz range made of directionally solidified halide eutectics
- (2013) R.I. Merino et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Optimization of Experimental Parameters To Determine the Jetting Regimes in Electrohydrodynamic Printing
- (2013) Ayoung Lee et al. LANGMUIR
- Manipulation of Nematic Liquid Crystal Microdroplets by Pyroelectric Effect
- (2013) Francesco Merola et al. MOLECULAR CRYSTALS AND LIQUID CRYSTALS
- 3D Printed Bionic Ears
- (2013) Manu S. Mannoor et al. NANO LETTERS
- Acoustophoretic contactless transport and handling of matter in air
- (2013) D. Foresti et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Ultrasonic assembly of anisotropic short fibre reinforced composites
- (2013) M.-S. Scholz et al. ULTRASONICS
- Large-scale organic nanowire lithography and electronics
- (2013) Sung-Yong Min et al. Nature Communications
- Three-dimensional deep sub-diffraction optical beam lithography with 9 nm feature size
- (2013) Zongsong Gan et al. Nature Communications
- Inkjet Printing Patterned Photonic Crystal Domes for Wide Viewing-Angle Displays by Controlling the Sliding Three Phase Contact Line
- (2013) Minxuan Kuang et al. Advanced Optical Materials
- Battle in the Amazon: Arapaima versus Piranha
- (2012) M. A. Meyers et al. ADVANCED ENGINEERING MATERIALS
- Highly Conductive and Stretchable Silver Nanowire Conductors
- (2012) Feng Xu et al. ADVANCED MATERIALS
- Tailored 3D Mechanical Metamaterials Made by Dip-in Direct-Laser-Writing Optical Lithography
- (2012) Tiemo Bückmann et al. ADVANCED MATERIALS
- Design and functionality of colloidal-crystal-templated materials—chemical applications of inverse opals
- (2012) Andreas Stein et al. CHEMICAL SOCIETY REVIEWS
- Bottom-up assembly of photonic crystals
- (2012) Georg von Freymann et al. CHEMICAL SOCIETY REVIEWS
- The effect of evaporation kinetics on nanoparticle structuring within contact line deposits of volatile drops
- (2012) Alexandros Askounis et al. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
- Layered Thin Film Micro Parts Reinforced with Aligned Short Fibers in Laser Stereolithography by Applying Magnetic Field
- (2012) Takeshi NAKAMOTO et al. Journal of Advanced Mechanical Design Systems and Manufacturing
- The hydrodynamic function of shark skin and two biomimetic applications
- (2012) J. Oeffner et al. JOURNAL OF EXPERIMENTAL BIOLOGY
- 3D micro-structures by piezoelectric inkjet printing of gold nanofluids
- (2012) Carmen Kullmann et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- Acoustofluidics 7: The acoustic radiation force on small particles
- (2012) Henrik Bruus LAB ON A CHIP
- A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
- (2012) Simon J. Leigh et al. PLoS One
- Design and optimization of a light-emitting diode projection micro-stereolithography three-dimensional manufacturing system
- (2012) Xiaoyu Zheng et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- The Stomatopod Dactyl Club: A Formidable Damage-Tolerant Biological Hammer
- (2012) J. C. Weaver et al. SCIENCE
- Composites Reinforced in Three Dimensions by Using Low Magnetic Fields
- (2012) R. M. Erb et al. SCIENCE
- Macroscopic-Scale Alignment of Ultralong Ag Nanowires in Polymer Nanofiber Mat and Their Hierarchical Structures by Magnetic-Field-Assisted Electrospinning
- (2012) Chuan-Ling Zhang et al. Small
- 3D Direct Laser Writing of Nano- and Microstructured Hierarchical Gecko-Mimicking Surfaces
- (2012) Michael Röhrig et al. Small
- A review of stimuli-responsive polymers for smart textile applications
- (2012) Jinlian Hu et al. Smart Materials and Structures
- Non-linear alignment dynamics in suspensions of platelets under rotating magnetic fields
- (2012) Randall M. Erb et al. Soft Matter
- Biomimetic superelastic graphene-based cellular monoliths
- (2012) Ling Qiu et al. Nature Communications
- Hierarchical structure and mechanical properties of nacre: a review
- (2012) Jiyu Sun et al. RSC Advances
- Simultaneous additive and subtractive three-dimensional nanofabrication using integrated two-photon polymerization and multiphoton ablation
- (2012) Wei Xiong et al. Light-Science & Applications
- Design and Rolling Locomotion of a Magnetically Actuated Soft Capsule Endoscope
- (2011) Sehyuk Yim et al. IEEE Transactions on Robotics
- Sintering of Inkjet-Printed Silver Nanoparticles at Room Temperature Using Intense Pulsed Light
- (2011) J. S. Kang et al. JOURNAL OF ELECTRONIC MATERIALS
- Dewetting-mediated pattern formation in nanoparticle assemblies
- (2011) Andrew Stannard JOURNAL OF PHYSICS-CONDENSED MATTER
- Long-Range Alignment of Gold Nanorods in Electrospun Polymer Nano/Microfibers
- (2011) Kristen E. Roskov et al. LANGMUIR
- Poisson's ratio and modern materials
- (2011) G. N. Greaves et al. NATURE MATERIALS
- Manipulation of particles in two dimensions using phase controllable ultrasonic standing waves
- (2011) C. R. P. Courtney et al. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Geometry and Mechanics in the Opening of Chiral Seed Pods
- (2011) S. Armon et al. SCIENCE
- Epidermal Electronics
- (2011) D.-H. Kim et al. SCIENCE
- Anisotropic Adhesion Properties of Triangular-Tip-Shaped Micropillars
- (2011) Moon Kyu Kwak et al. Small
- Tablet-level origin of toughening in abalone shells and translation to synthetic composite materials
- (2011) Horacio D. Espinosa et al. Nature Communications
- Self-Sharpening Mechanism of the Sea Urchin Tooth
- (2010) Christopher E. Killian et al. ADVANCED FUNCTIONAL MATERIALS
- Tunable Colors in Opals and Inverse Opal Photonic Crystals
- (2010) Carlos I. Aguirre et al. ADVANCED FUNCTIONAL MATERIALS
- Stretchable Microfluidic Radiofrequency Antennas
- (2010) Masahiro Kubo et al. ADVANCED MATERIALS
- Nanoparticulate Functional Materials
- (2010) Helmut Goesmann et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution
- (2010) Brian Derby Annual Review of Materials Research
- A review on stereolithography and its applications in biomedical engineering
- (2010) Ferry P.W. Melchels et al. BIOMATERIALS
- Amphiphilic block copolymer nano-fibers via RAFT-mediated polymerization in aqueous dispersed system
- (2010) Stéphanie Boissé et al. CHEMICAL COMMUNICATIONS
- On the compressive strength of open-cell metal foams with Kelvin and random cell structures
- (2010) Wen-Yea Jang et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Directing the Formation of Nanostructured Rings via Local Oxidation
- (2010) Andrew Stannard et al. LANGMUIR
- Analysis of an ultra hard magnetic biomineral in chiton radular teeth
- (2010) James C. Weaver et al. Materials Today
- Laser Printing Single Gold Nanoparticles
- (2010) Alexander S. Urban et al. NANO LETTERS
- Directional water collection on wetted spider silk
- (2010) Yongmei Zheng et al. NATURE
- Dispensing nano–pico droplets and liquid patterning by pyroelectrodynamic shooting
- (2010) P. Ferraro et al. Nature Nanotechnology
- Biomaterials by freeze casting
- (2010) U. G. K. Wegst et al. PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Lithium niobateX-cut,Y-cut, andZ-cut surfaces fromab initiotheory
- (2010) Simone Sanna et al. PHYSICAL REVIEW B
- The effect of particle aspect ratio on the electroelastic properties of piezoelectric nanocomposites
- (2010) C Andrews et al. Smart Materials and Structures
- Inkjet Printing-Process and Its Applications
- (2009) Madhusudan Singh et al. ADVANCED MATERIALS
- 6-Axis control ultraprecision microgrooving on sculptured surfaces with non-rotational cutting tool
- (2009) Y. Takeuchi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Yield and buckling behavior of Kelvin open-cell foams subjected to uniaxial compression
- (2009) Yuji Takahashi et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Coarse-grained lattice models for drying-mediated self-assembly of nanoparticles
- (2009) Orly Kletenik-Edelman et al. JOURNAL OF MATERIALS CHEMISTRY
- Microinjection molding of thermoplastic polymers: morphological comparison with conventional injection molding
- (2009) Julien Giboz et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- Nanoparticle catalysts
- (2009) A Z Moshfegh JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Acoustic tweezers: patterning cells and microparticles using standing surface acoustic waves (SSAW)
- (2009) Jinjie Shi et al. LAB ON A CHIP
- Primate archaeology
- (2009) Michael Haslam et al. NATURE
- Stretchable active-matrix organic light-emitting diode display using printable elastic conductors
- (2009) Tsuyoshi Sekitani et al. NATURE MATERIALS
- Structural colour printing using a magnetically tunable and lithographically fixable photonic crystal
- (2009) Hyoki Kim et al. Nature Photonics
- Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology
- (2009) Adir Cohen et al. ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY AND ENDODONTICS
- Crystal distribution and molecule orientation of micro injection molded polypropylene microstructured parts
- (2009) Zhen Lu et al. POLYMER ENGINEERING AND SCIENCE
- Giant-Stroke, Superelastic Carbon Nanotube Aerogel Muscles
- (2009) A. E. Aliev et al. SCIENCE
- A review of process development steps for new material systems in three dimensional printing (3DP)
- (2009) Ben Utela et al. Journal of Manufacturing Processes
- Ultra-Low Shrinkage Hybrid Photosensitive Material for Two-Photon Polymerization Microfabrication
- (2008) Aleksandr Ovsianikov et al. ACS Nano
- Patterning Thin Film Mechanical Properties to Drive Assembly of Complex 3D Structures
- (2008) Noy Bassik et al. ADVANCED MATERIALS
- Design of a Halbach Magnet Array Based on Optimization Techniques
- (2008) Jae-Seok Choi et al. IEEE TRANSACTIONS ON MAGNETICS
- Morphology and mechanical properties of polypropylene micro-arrays by micro-injection molding
- (2008) Zhen Lu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Dual-Scale Pattern Formation in Nanoparticle Assemblies
- (2008) Andrew Stannard et al. Journal of Physical Chemistry C
- Drying-Mediated Hierarchical Self-Assembly of Nanoparticles: A Dynamical Coarse-Grained Approach
- (2008) Orly Kletenik-Edelman et al. Journal of Physical Chemistry C
- Dual gratings interspersed on a single butterfly scale
- (2008) A. L Ingram et al. Journal of the Royal Society Interface
- Sliding-induced adhesion of stiff polymer microfibre arrays. II. Microscale behaviour
- (2008) B. Schubert et al. Journal of the Royal Society Interface
- Mechanisms and behavioural functions of structural coloration in cephalopods
- (2008) L. M Mathger et al. Journal of the Royal Society Interface
- Marangoni Effects on Evaporative Lithographic Patterning of Colloidal Films
- (2008) Daniel J. Harris et al. LANGMUIR
- Inkjet-Printed Line Morphologies and Temperature Control of the Coffee Ring Effect
- (2008) Dan Soltman et al. LANGMUIR
- Nanoscale Patterns of Oligonucleotides Formed by Electrohydrodynamic Jet Printing with Applications in Biosensing and Nanomaterials Assembly
- (2008) Jang-Ung Park et al. NANO LETTERS
- Programming biomolecular self-assembly pathways
- (2008) Peng Yin et al. NATURE
- Nanopatterning self-assembled nanoparticle superlattices by moulding microdroplets
- (2008) Wenlong Cheng et al. Nature Nanotechnology
- Electrospinning jets and polymer nanofibers
- (2008) Darrell H. Reneker et al. POLYMER
- Co‐axial Electrospinning for Nanofiber Structures: Preparation and Applications
- (2008) A. K. Moghe et al. Polymer Reviews
- The Transition from Stiff to Compliant Materials in Squid Beaks
- (2008) A. Miserez et al. SCIENCE
- Self-Assembling Nanoparticles at Surfaces and Interfaces
- (2007) Sachin Kinge et al. CHEMPHYSCHEM
- Gyroid cuticular structures in butterfly wing scales: biological photonic crystals
- (2007) K Michielsen et al. Journal of the Royal Society Interface
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now