标题
Additive manufacturing of structural materials
作者
关键词
Additive manufacturing, Structural materials, 3D printing, 4D printing
出版物
MATERIALS SCIENCE & ENGINEERING R-REPORTS
Volume -, Issue -, Pages 100596
出版商
Elsevier BV
发表日期
2021-04-02
DOI
10.1016/j.mser.2020.100596
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Self-Healable Hydrogel–Liquid Metal Composite Platform Enabled by a 3D Printed Stamp for a Multimodular Sensor System
- (2020) Yoon Young Choi et al. ACS Applied Materials & Interfaces
- Nanoengineered Osteoinductive Bioink for 3D Bioprinting Bone Tissue
- (2020) David Chimene et al. ACS Applied Materials & Interfaces
- 4D Printing of a Light-Driven Soft Actuator with Programmed Printing Density
- (2020) Akihiro Nishiguchi et al. ACS Applied Materials & Interfaces
- Biomimetic Nonuniform, Dual-Stimuli Self-Morphing Enabled by Gradient Four-Dimensional Printing
- (2020) Zhengyi Song et al. ACS Applied Materials & Interfaces
- Additive Manufacturing of Optical Quality Germania–Silica Glasses
- (2020) Koroush Sasan et al. ACS Applied Materials & Interfaces
- Ultra-gentle soft robotic fingers induce minimal transcriptomic response in a fragile marine animal
- (2020) Michael Tessler et al. CURRENT BIOLOGY
- 3D printing gets bigger, faster and stronger
- (2020) Mark Zastrow NATURE
- Fabrication of Biocompatible Composites of Poly(lactic acid)/Hydroxyapatite Envisioning Medical Applications
- (2020) Eduardo Henrique Backes et al. POLYMER ENGINEERING AND SCIENCE
- Direct‐Ink Written Shape‐Morphing Film with Rapid and Programmable Multimotion
- (2020) Zhengyi Mao et al. Advanced Materials Technologies
- Programming Shape-Morphing Behavior of Liquid Crystal Elastomers via Parameter-Encoded 4D Printing
- (2020) Luquan Ren et al. ACS Applied Materials & Interfaces
- 3D printing of hydrogels: Rational design strategies and emerging biomedical applications
- (2020) Jinhua Li et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing
- (2020) Saad A. Khairallah et al. SCIENCE
- A general method to synthesize and sinter bulk ceramics in seconds
- (2020) Chengwei Wang et al. SCIENCE
- 3D printing of conducting polymers
- (2020) Hyunwoo Yuk et al. Nature Communications
- Metal 3D printing as a disruptive technology for superalloys
- (2020) Chinnapat Panwisawas et al. Nature Communications
- 3D Printed MEMS Technology—Recent Developments and Applications
- (2020) Tomasz Blachowicz et al. Micromachines
- 4D printed electro-induced continuous carbon fiber reinforced shape memory polymer composites with excellent bending resistance
- (2020) Chengjun Zeng et al. COMPOSITES PART B-ENGINEERING
- Trabecular-like Ti-6Al-4V scaffolds for orthopedic: fabrication by selective laser melting and in vitro biocompatibility
- (2019) Huixin Liang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Damage-tolerant architected materials inspired by crystal microstructure
- (2019) Minh-Son Pham et al. NATURE
- SPE's 48th Automotive Innovation Awards Celebrates Achievements in Auto Plastics
- (2019) Peggy Malnati PLASTICS ENGINEERING
- Fe-based bulk metallic glasses: glass formation, fabrication, properties and applications
- (2019) H.X. Li et al. PROGRESS IN MATERIALS SCIENCE
- A 3D printed PCB integrated TEM Horn Antenna
- (2019) Enrique Miralles et al. RADIO SCIENCE
- A Fully Three-Dimensional Printed Inchworm-Inspired Soft Robot with Magnetic Actuation
- (2019) Erina B. Joyee et al. Soft Robotics
- Microstructure and Mechanical Properties of 9Cr Martensitic Heat-resistant Steel Fabricated by Wire and Arc Additive Manufacture Technology
- (2019) Chuang Gao et al. Materials Express
- Advances in Selective Laser Melting of Nitinol Shape Memory Alloy Part Production
- (2019) Josiah Chekotu et al. Materials
- A three-dimensional printed porous implant combined with bone grafting following curettage of a subchondral giant cell tumour of the proximal tibia: a case report
- (2019) Minxun Lu et al. BMC Surgery
- Multimaterial actinic spatial control 3D and 4D printing
- (2019) J. J. Schwartz et al. Nature Communications
- 3D ink-extrusion additive manufacturing of CoCrFeNi high-entropy alloy micro-lattices
- (2019) Christoph Kenel et al. Nature Communications
- Elastic Shape Morphing of Ultralight Structures by Programmable Assembly
- (2019) Nick Cramer et al. Smart Materials and Structures
- Volumetric additive manufacturing via tomographic reconstruction
- (2019) Brett E. Kelly et al. SCIENCE
- Simple approach to developing high-efficiency neutron shielding composites
- (2019) Xuan Zhang et al. POLYMER ENGINEERING AND SCIENCE
- Morphing wing with compliant aileron and slat for unmanned aerial vehicles
- (2019) Alexander Menshchikov et al. PHYSICS OF FLUIDS
- A novel near-infrared light responsive 4D printed nanoarchitecture with dynamically and remotely controllable transformation
- (2019) Haitao Cui et al. Nano Research
- Aero-structural optimization and analysis of a camber-morphing flying wing: Structural and wind tunnel testing
- (2019) Dominic Keidel et al. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES
- Pyrolysis model for multiple compositions of a glass reinforced unsaturated polyester composite
- (2019) Mark B. McKinnon et al. JOURNAL OF APPLIED POLYMER SCIENCE
- New Concept for Aircraft Morphing Wing Skin: Design, Modeling, and Analysis
- (2019) Hangil You et al. AIAA JOURNAL
- Dual-Gel 4D Printing of Bioinspired Tubes
- (2019) Jiayu Liu et al. ACS Applied Materials & Interfaces
- High-Gain Circularly Polarized Lens Antenna for Terahertz Applications
- (2019) Geng Bo Wu et al. IEEE Antennas and Wireless Propagation Letters
- Multivascular networks and functional intravascular topologies within biocompatible hydrogels
- (2019) Bagrat Grigoryan et al. SCIENCE
- 3D printed flexible triboelectric nanogenerator with viscoelastic inks for mechanical energy harvesting
- (2019) Hui Li et al. Nano Energy
- 4D Printing of Shape‐Memory Hydrogels for Soft‐Robotic Functions
- (2019) MD Nahin Islam Shiblee et al. Advanced Materials Technologies
- Chemistry from 3D printed objects
- (2019) Matthew R. Hartings et al. Nature Reviews Chemistry
- Direct 3D Printing of Hybrid Nanofiber-Based Nanocomposites for Highly Conductive and Shape Memory Applications
- (2019) Hongqiu Wei et al. ACS Applied Materials & Interfaces
- Shape Morphing of Hydrogels in Alternating Magnetic Field
- (2019) Jingda Tang et al. ACS Applied Materials & Interfaces
- 3D printing of biomimetic composites with improved fracture toughness
- (2019) Zian Jia et al. ACTA MATERIALIA
- 3D printed zirconia ceramic hip joint with precise structure and broad-spectrum antibacterial properties
- (2019) Yanglong Zhu et al. International Journal of Nanomedicine
- Reconfigurable ferromagnetic liquid droplets
- (2019) Xubo Liu et al. SCIENCE
- 3D bioprinting of collagen to rebuild components of the human heart
- (2019) A. Lee et al. SCIENCE
- Multi-functional soft-bodied jellyfish-like swimming
- (2019) Ziyu Ren et al. Nature Communications
- Laser-Based Hybrid Manufacturing of Endosseous Implants: Optimized Titanium Surfaces for Enhancing Osteogenic Differentiation of Human Mesenchymal Stem Cells
- (2019) Guenaelle Bouet et al. ACS Biomaterials-Science & Engineering
- Partial Bone Formation in Additive Manufactured Porous Implants Reduces Predicted Stress and Danger of Fatigue Failure
- (2019) Vee San Cheong et al. ANNALS OF BIOMEDICAL ENGINEERING
- The role of the soft phase in rigidity enhancements in a particulate composite
- (2019) Sambit Bapari et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Additive manufacturing of NiTi shape memory alloys using pre-mixed powders
- (2019) C. Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- 3D laser-printed porous Ti6Al4V dental implants for compromised bone support
- (2019) Che Chang Tu et al. JOURNAL OF THE FORMOSAN MEDICAL ASSOCIATION
- Ultrahigh-performance TiNi shape memory alloy by 4D printing
- (2019) H.Z. Lu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Electrochemically reconfigurable architected materials
- (2019) Xiaoxing Xia et al. NATURE
- A review of catalytic performance of metallic glasses in wastewater treatment: Recent progress and prospects
- (2019) Lai-Chang Zhang et al. PROGRESS IN MATERIALS SCIENCE
- All-printed 3D hierarchically structured cellulose aerogel based triboelectric nanogenerator for multi-functional sensors
- (2019) Cuncun Qian et al. Nano Energy
- Experimental investigation of machined hole and optimization of machining parameters using electrochemical machining
- (2019) T. Sathish Journal of Materials Research and Technology-JMR&T
- 3D Printing of Magnetoresponsive Polymeric Materials with Tunable Mechanical and Magnetic Properties by Digital Light Processing
- (2019) Simone Lantean et al. Advanced Materials Technologies
- Soft phototactic swimmer based on self-sustained hydrogel oscillator
- (2019) Yusen Zhao et al. Science Robotics
- Untethered soft robotic matter with passive control of shape morphing and propulsion
- (2019) Arda Kotikian et al. Science Robotics
- Ultragentle manipulation of delicate structures using a soft robotic gripper
- (2019) Nina R. Sinatra et al. Science Robotics
- Symmetry-Breaking Actuation Mechanism for Soft Robotics and Active Metamaterials
- (2019) Shuai Wu et al. ACS Applied Materials & Interfaces
- 3D Printing of Interdigitated Dielectric Elastomer Actuators
- (2019) Alex Chortos et al. ADVANCED FUNCTIONAL MATERIALS
- Additive Manufacturing of Bioactive Poly(trimethylene carbonate)/β-Tricalcium Phosphate Composites for Bone Regeneration
- (2019) Kasper E. G. Dienel et al. BIOMACROMOLECULES
- Personalized 4D printing of bioinspired tracheal scaffold concept based on magnetic stimulated shape memory composites
- (2019) Wei Zhao et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Manufacturing of polymer/metal composites by fused deposition modeling process with polyethylene
- (2019) Mojtaba Nabipour et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Nanomagnetic encoding of shape-morphing micromachines
- (2019) Jizhai Cui et al. NATURE
- Voxelated soft matter via multimaterial multinozzle 3D printing
- (2019) Mark A. Skylar-Scott et al. NATURE
- Three-dimensional printing of multicomponent glasses using phase-separating resins
- (2019) David G. Moore et al. NATURE MATERIALS
- Scalable submicrometer additive manufacturing
- (2019) Sourabh K. Saha et al. SCIENCE
- Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface
- (2019) David A. Walker et al. SCIENCE
- Fabrication of integrated microfluidic devices by direct ink writing (DIW) 3D printing
- (2019) Terry Ching et al. SENSORS AND ACTUATORS B-CHEMICAL
- Aluminum with dispersed nanoparticles by laser additive manufacturing
- (2019) Ting-Chiang Lin et al. Nature Communications
- Multi-stimuli-responsive programmable biomimetic actuator
- (2019) Yue Dong et al. Nature Communications
- Stress, strain and deformation of poly-lactic acid filament deposited onto polyethylene terephthalate woven fabric through 3D printing process
- (2019) Prisca Aude Eutionnat-Diffo et al. Scientific Reports
- 3D‐Printed Sugar Scaffold for High‐Precision and Highly Sensitive Active and Passive Wearable Sensors
- (2019) Dong Hae Ho et al. Advanced Science
- 3D printing of very soft elastomer and sacrificial carbohydrate glass/elastomer structures for robotic applications
- (2019) Armita Hamidi et al. MATERIALS & DESIGN
- CNT-based electro-responsive shape memory functionalized 3D printed nanocomposites for liquid sensors
- (2019) Xue Wan et al. CARBON
- 4D printed anisotropic structures with tailored mechanical behaviors and shape memory effects
- (2019) Tianzhen Liu et al. COMPOSITES SCIENCE AND TECHNOLOGY
- A review on 3D printed matrix polymer composites: its potential and future challenges
- (2019) Jabran Saroia et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Electromagnetic property of a novel gradient honeycomb composite fabricated by 3D forming
- (2019) Zhao Pei et al. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
- Printing accuracy, mechanical properties, surface characteristics, and microbial adhesion of 3D-printed resins with various printing orientations
- (2019) Ji Suk Shim et al. JOURNAL OF PROSTHETIC DENTISTRY
- Additive manufacturing of ultrafine-grained high-strength titanium alloys
- (2019) Duyao Zhang et al. NATURE
- Effect of powder characteristics on production of oxide dispersion strengthened Fe 14Cr steel by laser powder bed fusion
- (2019) Elodie Vasquez et al. POWDER TECHNOLOGY
- Effects of pore size and porosity of surface-modified porous titanium implants on bone tissue ingrowth
- (2019) Jing-pu ZHENG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Three-Dimensional Printing of a LiFePO4/Graphite Battery Cell via Fused Deposition Modeling
- (2019) Alexis Maurel et al. Scientific Reports
- Tissue-engineering of vascular grafts containing endothelium and smooth-muscle using triple-coaxial cell printing
- (2019) Ge Gao et al. Applied Physics Reviews
- Additive Manufacturing of Transparent Silica Glass from Solutions
- (2018) Ido Cooperstein et al. ACS Applied Materials & Interfaces
- Hydrophilic/Hydrophobic Composite Shape-Shifting Structures
- (2018) Zeang Zhao et al. ACS Applied Materials & Interfaces
- Correlating the microstructure, growth mechanism and magnetic properties of FeSiAl soft magnetic composites fabricated via HNO 3 oxidation
- (2018) Dong Liu et al. ACTA MATERIALIA
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- High-strength epoxy nanocomposites for 3D printing
- (2018) Nadim S. Hmeidat et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Infill Optimization for Additive Manufacturing—Approaching Bone-Like Porous Structures
- (2018) Jun Wu et al. IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS
- 3D printing of Zr-based bulk metallic glasses with complex geometries and enhanced catalytic properties
- (2018) Chong Yang et al. INTERMETALLICS
- Cleft Alveolus Reconstruction Using a Three-Dimensional Printed Bioresorbable Scaffold With Human Bone Marrow Cells
- (2018) Geunseon Ahn et al. JOURNAL OF CRANIOFACIAL SURGERY
- A hybrid sodium-ion capacitor with polyimide as anode and polyimide-derived carbon as cathode
- (2018) Qinglan Zhao et al. JOURNAL OF POWER SOURCES
- Rolling of 3D Printed Dual-Layer Beam into a Cylinder by Ethanol Absorption
- (2018) Woorim Choi et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Mg-based bone implants show promising osteoinductivity and controllable degradation: A long-term study in a goat femoral condyle fracture model
- (2018) Xiangdong Kong et al. Materials Science & Engineering C-Materials for Biological Applications
- Additive manufacturing of multi-material structures
- (2018) Amit Bandyopadhyay et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Effect of heat treatment on microstructure, mechanical and corrosion properties of austenitic stainless steel 316L using arc additive manufacturing
- (2018) Xiaohui Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of last stage heat treatment on microstructure and mechanical properties of laser additive manufactured AF1410 steel
- (2018) Yifan Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Three-Dimensional High-Entropy Alloy–Polymer Composite Nanolattices That Overcome the Strength–Recoverability Trade-off
- (2018) Xuan Zhang et al. NANO LETTERS
- Additive manufacturing of biomaterials
- (2018) Susmita Bose et al. PROGRESS IN MATERIALS SCIENCE
- Bioinspired spring origami
- (2018) Jakob A. Faber et al. SCIENCE
- 3D printing for soft robotics – a review
- (2018) Jahan Zeb Gul et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Additive manufacturing of NiTiHf high temperature shape memory alloy
- (2018) Mohammad Elahinia et al. SCRIPTA MATERIALIA
- Non-beam-based metal additive manufacturing enabled by additive friction stir deposition
- (2018) Hang Z. Yu et al. SCRIPTA MATERIALIA
- A digital light processing 3D printer for fast and high-precision fabrication of soft pneumatic actuators
- (2018) Lisen Ge et al. SENSORS AND ACTUATORS A-PHYSICAL
- (Bio)Analytical chemistry enabled by 3D printing: Sensors and biosensors
- (2018) C. Lorena Manzanares Palenzuela et al. TRAC-TRENDS IN ANALYTICAL CHEMISTRY
- 3D printing of robotic soft actuators with programmable bioinspired architectures
- (2018) Manuel Schaffner et al. Nature Communications
- Additive manufacturing of 3D nano-architected metals
- (2018) Andrey Vyatskikh et al. Nature Communications
- 4D Printing of Robust Hydrogels Consisted of Agarose Nanofibers and Polyacrylamide
- (2018) Jinhua Guo et al. ACS Macro Letters
- 3D and 4D Bioprinting of the Myocardium: Current Approaches, Challenges, and Future Prospects
- (2018) Chin Siang Ong et al. Biomed Research International
- 3D printing of shape changing composites for constructing flexible paper-based photothermal bilayer actuators
- (2018) Dechuan Hua et al. Journal of Materials Chemistry C
- Three-dimensional ultraflexible triboelectric nanogenerator made by 3D printing
- (2018) Baodong Chen et al. Nano Energy
- Oxide dispersion-strengthened alloys generated by laser metal deposition of laser-generated nanoparticle-metal powder composites
- (2018) Carlos Doñate-Buendía et al. MATERIALS & DESIGN
- 3D printing of Fe-based bulk metallic glass composites with combined high strength and fracture toughness
- (2018) Ning Li et al. MATERIALS & DESIGN
- Production Techniques for 3D Printed Inflatable Elastomer Structures: Part II—Four-Axis Direct Ink Writing on Irregular Double-Curved and Inflatable Surfaces
- (2018) Fergal B. Coulter et al. 3D Printing and Additive Manufacturing
- Additive Manufacturing as a Method to Design and Optimize Bioinspired Structures
- (2018) Audrey Velasco-Hogan et al. ADVANCED MATERIALS
- Shape memory behavior and recovery force of 4D printed laminated Miura-origami structures subjected to compressive loading
- (2018) Yang Liu et al. COMPOSITES PART B-ENGINEERING
- Enhanced fracture toughness in architected interpenetrating phase composites by 3D printing
- (2018) Tiantian Li et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Bio-inspired magnetic helical microswimmers made of nickel-plated Spirulina with enhanced propulsion velocity
- (2018) De Gong et al. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
- 3D printing metals like thermoplastics: Fused filament fabrication of metallic glasses
- (2018) Michael A. Gibson et al. Materials Today
- Printing ferromagnetic domains for untethered fast-transforming soft materials
- (2018) Yoonho Kim et al. NATURE
- Small-scale soft-bodied robot with multimodal locomotion
- (2018) Wenqi Hu et al. NATURE
- Shipboard design and fabrication of custom 3D-printed soft robotic manipulators for the investigation of delicate deep-sea organisms
- (2018) Daniel M. Vogt et al. PLoS One
- Flexible magnetic composites for light-controlled actuation and interfaces
- (2018) Meng Li et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- A bioinspired multilegged soft millirobot that functions in both dry and wet conditions
- (2018) Haojian Lu et al. Nature Communications
- Advanced Radar Absorbing Ceramic-Based Materials for Multifunctional Applications in Space Environment
- (2018) Andrea Delfini et al. Materials
- 3D printing of multicolor luminescent glass
- (2018) Chang Liu et al. RSC Advances
- A Dexterous, Glove-Based Teleoperable Low-Power Soft Robotic Arm for Delicate Deep-Sea Biological Exploration
- (2018) Brennan T. Phillips et al. Scientific Reports
- Polymer tubes as carrier boats of thermosetting and powder materials based on 3D printing for triboelectric nanogenerator with microstructure
- (2018) Shihua He et al. Nano Energy
- Tailored Polyimide–Graphene Nanocomposite as Negative Electrode and Reduced Graphene Oxide as Positive Electrode for Flexible Hybrid Sodium-Ion Capacitors
- (2018) Qinglan Zhao et al. ACS Applied Materials & Interfaces
- 4D Printing of Complex Structures with a Fast Response Time to Magnetic Stimulus
- (2018) Pengfei Zhu et al. ACS Applied Materials & Interfaces
- 3D printing of ceramics: A review
- (2018) Zhangwei Chen et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Polymeric composites for powder-based additive manufacturing: Materials and applications
- (2018) Shangqin Yuan et al. PROGRESS IN POLYMER SCIENCE
- 3D Printing of Anisotropic Hydrogels with Bioinspired Motion
- (2018) Hakan Arslan et al. Advanced Science
- Toward a remarkable Li-S battery via 3D printing
- (2018) Xuejie Gao et al. Nano Energy
- Elemental segregation in an AlCoCrFeNi high-entropy alloy – A comparison between selective laser melting and induction melting
- (2018) Dennis Karlsson et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Selective Laser Sintering as Manufacturing Process for the Realization of Complex Nuclear Fusion and High Heat Flux Components
- (2017) Heiko Neuberger et al. FUSION SCIENCE AND TECHNOLOGY
- Groove Gap Waveguide in 3-D Printed Technology for Low Loss, Weight, and Cost Distribution Networks
- (2017) Adrian Tamayo-Dominguez et al. IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES
- 3D printing of crack-free high strength Zr-based bulk metallic glass composite by selective laser melting
- (2017) Di Ouyang et al. INTERMETALLICS
- Parameter optimization and experimental study of the sprocket repairing using laser cladding
- (2017) Huaming Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Design for Additive Bio-Manufacturing: From Patient-Specific Medical Devices to Rationally Designed Meta-Biomaterials
- (2017) Amir Zadpoor INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Experimental optimization of laser additive manufacturing process of single-crystal nickel-base superalloys by a statistical experiment design method
- (2017) Yao-Jian Liang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Investigation of mechanical properties for hybrid deposition and micro-rolling of bainite steel
- (2017) Youheng Fu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Boracic polyethylene/polyethylene wax blends and open-cell nickel foams as neutron-shielding composite
- (2017) Yun Zhang et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- 3D-printing and mechanics of bio-inspired articulated and multi-material structures
- (2017) Michael M. Porter et al. Journal of the Mechanical Behavior of Biomedical Materials
- A personalized 3D-printed prosthetic joint replacement for the human temporomandibular joint: From implant design to implantation
- (2017) David C. Ackland et al. Journal of the Mechanical Behavior of Biomedical Materials
- 4D Printed Actuators with Soft-Robotic Functions
- (2017) María López-Valdeolivas et al. MACROMOLECULAR RAPID COMMUNICATIONS
- CoCrFeNiTi-based high-entropy alloy with superior tensile strength and corrosion resistance achieved by a combination of additive manufacturing using selective electron beam melting and solution treatment
- (2017) Tadashi Fujieda et al. MATERIALS LETTERS
- Dual-phase nanostructuring as a route to high-strength magnesium alloys
- (2017) Ge Wu et al. NATURE
- Three-dimensional printing of transparent fused silica glass
- (2017) Frederik Kotz et al. NATURE
- 3D printing of high-strength aluminium alloys
- (2017) John H. Martin et al. NATURE
- A polyethylene-B 4 C based concrete for enhanced neutron shielding at neutron research facilities
- (2017) D.D. DiJulio et al. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT
- Cross-linkable multi-stimuli responsive hydrogel inks for direct-write 3D printing
- (2017) Dylan G. Karis et al. Polymer Chemistry
- Preparation and characteristics of epoxy/clay/B4C nanocomposite at high concentration of boron carbide for neutron shielding application
- (2017) Mohammad Amin Kiani et al. RADIATION PHYSICS AND CHEMISTRY
- Characterization of plastic and boron carbide additive manufactured neutron collimators
- (2017) M. B. Stone et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- 3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers
- (2017) Chao Yuan et al. Soft Matter
- Effect of dilution and macrosegregation on corrosion resistance of laser clad AerMet100 steel coating on 300M steel substrate
- (2017) Jian Liu et al. SURFACE & COATINGS TECHNOLOGY
- A 3D magnetic tissue stretcher for remote mechanical control of embryonic stem cell differentiation
- (2017) Vicard Du et al. Nature Communications
- A light-driven artificial flytrap
- (2017) Owies M. Wani et al. Nature Communications
- 3D Printable Ceramic-Polymer Electrolytes for Flexible High-Performance Li-Ion Batteries with Enhanced Thermal Stability
- (2017) Aaron J. Blake et al. Advanced Energy Materials
- 3D printing of a mechanically durable superhydrophobic porous membrane for oil–water separation
- (2017) Juan Lv et al. Journal of Materials Chemistry A
- Temperature and pH responsive 3D printed scaffolds
- (2017) Sujan Dutta et al. Journal of Materials Chemistry B
- Multimaterials 3D Printing for Free Assembly Manufacturing of Magnetic Driving Soft Actuator
- (2017) Zhongying Ji et al. Advanced Materials Interfaces
- A multifunctional skin-like sensor based on a 3D printed thermo-responsive hydrogel
- (2017) Zhouyue Lei et al. Materials Horizons
- Digital Morphing Wing: Active Wing Shaping Concept Using Composite Lattice-Based Cellular Structures
- (2017) Benjamin Jenett et al. Soft Robotics
- A review of 4D printing
- (2017) Farhang Momeni et al. MATERIALS & DESIGN
- Processing a glass-forming Zr-based alloy by selective laser melting
- (2017) S. Pauly et al. MATERIALS & DESIGN
- 3D printing of large, complex metallic glass structures
- (2017) Yiyu Shen et al. MATERIALS & DESIGN
- 3D Inkjet Printing of Electronics Using UV Conversion
- (2017) Ehab Saleh et al. Advanced Materials Technologies
- Magnetic Driving Flowerlike Soft Platform: Biomimetic Fabrication and External Regulation
- (2016) Wei Gao et al. ACS Applied Materials & Interfaces
- Three-Dimensional Printing of pH-Responsive and Functional Polymers on an Affordable Desktop Printer
- (2016) Milena Nadgorny et al. ACS Applied Materials & Interfaces
- Direct-Write Fabrication of 4D Active Shape-Changing Structures Based on a Shape Memory Polymer and Its Nanocomposite
- (2016) Hongqiu Wei et al. ACS Applied Materials & Interfaces
- Three-Dimensional, Inkjet-Printed Organic Transistors and Integrated Circuits with 100% Yield, High Uniformity, and Long-Term Stability
- (2016) Jimin Kwon et al. ACS Nano
- Rapid Laser Printing of Paper-Based Multilayer Circuits
- (2016) Gui-Wen Huang et al. ACS Nano
- Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loading
- (2016) Thomas Tancogne-Dejean et al. ACTA MATERIALIA
- Template-Free 3D Microprinting of Metals Using a Force-Controlled Nanopipette for Layer-by-Layer Electrodeposition
- (2016) Luca Hirt et al. ADVANCED MATERIALS
- 3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics
- (2016) Clara Minas et al. ADVANCED MATERIALS
- Graphene Oxide-Based Electrode Inks for 3D-Printed Lithium-Ion Batteries
- (2016) Kun Fu et al. ADVANCED MATERIALS
- Amorphous Fe 78 Si 9 B 13 alloy: An efficient and reusable photo-enhanced Fenton-like catalyst in degradation of cibacron brilliant red 3B-A dye under UV–vis light
- (2016) Z. Jia et al. APPLIED CATALYSIS B-ENVIRONMENTAL
- A 3D printed superconducting aluminium microwave cavity
- (2016) Daniel L. Creedon et al. APPLIED PHYSICS LETTERS
- Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
- (2016) Xiaojian Wang et al. BIOMATERIALS
- Additive manufacturing of biologically-inspired materials
- (2016) André R. Studart CHEMICAL SOCIETY REVIEWS
- 3D-printing technologies for electrochemical applications
- (2016) Adriano Ambrosi et al. CHEMICAL SOCIETY REVIEWS
- Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
- (2016) Xiaoyong Tian et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Periodontal ligament stem/progenitor cells with protein-releasing scaffolds for cementum formation and integration on dentin surface
- (2016) Hankyu Cho et al. CONNECTIVE TISSUE RESEARCH
- A Lightweight 3-D Printed $X$ -Band Bandpass Filter Based on Spherical Dual-Mode Resonators
- (2016) Cheng Guo et al. IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS
- 3-D Printed Millimeter-Wave and Terahertz Lenses with Fixed and Frequency Scanned Beam
- (2016) Huan Yi et al. IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION
- Nucleation and growth of chimney pores during electron-beam additive manufacturing
- (2016) Zachary C. Cordero et al. JOURNAL OF MATERIALS SCIENCE
- Fully porous 3D printed titanium femoral stem to reduce stress-shielding following total hip arthroplasty
- (2016) Sajad Arabnejad et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- Direct Ink Writing of micrometric SiOC ceramic structures using a preceramic polymer
- (2016) Giovanni Pierin et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Fundamental understanding of water vapor effect on SiOC evolution during pyrolysis
- (2016) Kathy Lu et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- 4D Printing of Reversible Shape Morphing Hydrogel Structures
- (2016) Sina Naficy et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Porous polymer derived ceramics
- (2016) Cekdar Vakifahmetoglu et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Low temperature additive manufacturing of three dimensional scaffolds for bone-tissue engineering applications: Processing related challenges and property assessment
- (2016) Alok Kumar et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Relationship between the microstructure and mechanical properties of an equiatomic AlCoCrFeNi high-entropy alloy fabricated by selective electron beam melting
- (2016) Hiroshi Shiratori et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Wire + Arc Additive Manufacturing
- (2016) S. W. Williams et al. MATERIALS SCIENCE AND TECHNOLOGY
- Printing soft matter in three dimensions
- (2016) Ryan L. Truby et al. NATURE
- An integrated design and fabrication strategy for entirely soft, autonomous robots
- (2016) Michael Wehner et al. NATURE
- Multiscale metallic metamaterials
- (2016) Xiaoyu Zheng et al. NATURE MATERIALS
- Biomimetic 4D printing
- (2016) A. Sydney Gladman et al. NATURE MATERIALS
- Applications of 3D printing in cardiovascular diseases
- (2016) Andreas A. Giannopoulos et al. Nature Reviews Cardiology
- Multiprocess 3D printing for increasing component functionality
- (2016) E. MacDonald et al. SCIENCE
- Micromechanics of Amorphous Metal/Polymer Hybrid Structures with 3D Cellular Architectures: Size Effects, Buckling Behavior, and Energy Absorption Capability
- (2016) Maxime Mieszala et al. Small
- Reconstruction of the Upper Cervical Spine Using a Personalized 3D-Printed Vertebral Body in an Adolescent With Ewing Sarcoma
- (2016) Nanfang Xu et al. SPINE
- Combinatorial Alloy Design by Laser Additive Manufacturing
- (2016) Helene Knoll et al. STEEL RESEARCH INTERNATIONAL
- Four-Dimensional Printing Hierarchy Scaffolds with Highly Biocompatible Smart Polymers for Tissue Engineering Applications
- (2016) Shida Miao et al. TISSUE ENGINEERING PART C-METHODS
- Nanotwin-governed toughening mechanism in hierarchically structured biological materials
- (2016) Yoon Ah Shin et al. Nature Communications
- Metallic 3-D Printed Rectangular Waveguides for Millimeter-Wave Applications
- (2016) Bing Zhang et al. IEEE Transactions on Components Packaging and Manufacturing Technology
- In Situ Thermal Generation of Silver Nanoparticles in 3D Printed Polymeric Structures
- (2016) Erika Fantino et al. Materials
- UV-Assisted 3D Printing of Glass and Carbon Fiber-Reinforced Dual-Cure Polymer Composites
- (2016) Marta Invernizzi et al. Materials
- Metallic 3-D Printed Antennas for Millimeter- and Submillimeter Wave Applications
- (2016) Bing Zhang et al. IEEE Transactions on Terahertz Science and Technology
- Composite batteries: a simple yet universal approach to 3D printable lithium-ion battery electrodes
- (2016) Ryan R. Kohlmeyer et al. Journal of Materials Chemistry A
- Selective laser melting of Zr-based bulk metallic glasses: Processing, microstructure and mechanical properties
- (2016) X.P. Li et al. MATERIALS & DESIGN
- A novel approach to improve mechanical properties of parts fabricated by fused deposition modeling
- (2016) Jianlei Wang et al. MATERIALS & DESIGN
- 3D printed anisotropic dielectric composite with meta-material features
- (2016) D.V. Isakov et al. MATERIALS & DESIGN
- The in vitro biocompatibility and osteoinductive activity study of magnesium composed PLGA/TCP porous scaffold for bone regeneration
- (2016) Cairong Li et al. Journal of Orthopaedic Translation
- Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites
- (2016) F. Castles et al. Scientific Reports
- The effect of density and feature size on mechanical properties of isostructural metallic foams produced by additive manufacturing
- (2015) E. Hernández-Nava et al. ACTA MATERIALIA
- Helical 3D-Printed Metal Electrodes as Custom-Shaped 3D Platform for Electrochemical Devices
- (2015) Adriano Ambrosi et al. ADVANCED FUNCTIONAL MATERIALS
- Metallic Architectures from 3D-Printed Powder-Based Liquid Inks
- (2015) Adam E. Jakus et al. ADVANCED FUNCTIONAL MATERIALS
- Stereolithography of SiOC Ceramic Microcomponents
- (2015) Erika Zanchetta et al. ADVANCED MATERIALS
- Capacitive Soft Strain Sensors via Multicore-Shell Fiber Printing
- (2015) Andreas Frutiger et al. ADVANCED MATERIALS
- Self-Fueled Biomimetic Liquid Metal Mollusk
- (2015) Jie Zhang et al. ADVANCED MATERIALS
- 3D Printing of Shape Memory Polymers for Flexible Electronic Devices
- (2015) Matt Zarek et al. ADVANCED MATERIALS
- Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
- (2015) Fuda Ning et al. COMPOSITES PART B-ENGINEERING
- Layer-by-layer printing of laminated graphene-based interdigitated microelectrodes for flexible planar micro-supercapacitors
- (2015) Gengzhi Sun et al. ELECTROCHEMISTRY COMMUNICATIONS
- 3D printed iris bandpass filters for millimetre-wave applications
- (2015) B. Zhang et al. ELECTRONICS LETTERS
- A 3-D Printed Lightweight X-Band Waveguide Filter Based on Spherical Resonators
- (2015) Cheng Guo et al. IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS
- Advanced Butler Matrices With Integrated Bandpass Filter Functions
- (2015) Vittorio Tornielli di Crestvolant et al. IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES
- 3D-Printed Origami Packaging With Inkjet-Printed Antennas for RF Harvesting Sensors
- (2015) John Kimionis et al. IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES
- Mechanical response of Ti–6Al–4V octet-truss lattice structures
- (2015) Liang Dong et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Experimental and numerical analysis of the selective laser sintering (SLS) of PA12 and PEKK semi-crystalline polymers
- (2015) Patrice Peyre et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Surface Modification and Performance Enhancement of Carbon Derived from Chromium Carbide for Supercapacitor Applications
- (2015) Q. Zhao et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Slurry-based additive manufacturing of ceramic parts by selective laser burn-out
- (2015) Hwa-Hsing Tang et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- First demonstration of promising selective electron beam melting method for utilizing high-entropy alloys as engineering materials
- (2015) Tadashi Fujieda et al. MATERIALS LETTERS
- 3D printing of porous hydroxyapatite scaffolds intended for use in bone tissue engineering applications
- (2015) Sophie C. Cox et al. Materials Science & Engineering C-Materials for Biological Applications
- Comparative study of the microstructures and mechanical properties of direct laser fabricated and arc-melted Al x CoCrFeNi high entropy alloys
- (2015) Jithin Joseph et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Electrospray-printed nanostructured graphene oxide gas sensors
- (2015) Anthony P Taylor et al. NANOTECHNOLOGY
- Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles
- (2015) Lian-Yi Chen et al. NATURE
- Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
- (2015) Xiaolei Wu et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Resilient 3D hierarchical architected metamaterials
- (2015) Lucas R. Meza et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Continuous liquid interface production of 3D objects
- (2015) J. R. Tumbleston et al. SCIENCE
- Additive manufacturing of polymer-derived ceramics
- (2015) Z. C. Eckel et al. SCIENCE
- The use of high-entropy alloys in additive manufacturing
- (2015) Yevgeni Brif et al. SCRIPTA MATERIALIA
- Electrodeposition-based 3D Printing of Metallic Microarchitectures with Controlled Internal Structures
- (2015) Seung Kwon Seol et al. Small
- Mechanisms, Capabilities, and Applications of High-Resolution Electrohydrodynamic Jet Printing
- (2015) M. Serdar Onses et al. Small
- Designing bioinspired composite reinforcement architectures via 3D magnetic printing
- (2015) Joshua J. Martin et al. Nature Communications
- 3-D Printed Metal-Pipe Rectangular Waveguides
- (2015) Mario D'Auria et al. IEEE Transactions on Components Packaging and Manufacturing Technology
- 3D Printable Graphene Composite
- (2015) Xiaojun Wei et al. Scientific Reports
- Review of selective laser melting: Materials and applications
- (2015) C. Y. Yap et al. Applied Physics Reviews
- Sintering and Additive Manufacturing: The New Paradigm for the Jewellery Manufacturer
- (2015) Frank Cooper Johnson Matthey Technology Review
- 4D Printing Inflatable Silicone Structures
- (2015) Fergal B. Coulter et al. 3D Printing and Additive Manufacturing
- Additive Manufacturing of Optically Transparent Glass
- (2015) John Klein et al. 3D Printing and Additive Manufacturing
- 4D Printing Technology: A Review
- (2015) Jin Choi et al. 3D Printing and Additive Manufacturing
- Bio-inspired impact-resistant composites
- (2014) L.K. Grunenfelder et al. Acta Biomaterialia
- Stable SiOC/Sn Nanocomposite Anodes for Lithium-Ion Batteries with Outstanding Cycling Stability
- (2014) Jan Kaspar et al. ADVANCED FUNCTIONAL MATERIALS
- Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
- (2014) Joseph T. Muth et al. ADVANCED MATERIALS
- 3D-Printing of Lightweight Cellular Composites
- (2014) Brett G. Compton et al. ADVANCED MATERIALS
- Bone loss following knee arthroplasty: potential treatment options
- (2014) Michele Vasso et al. ARCHIVES OF ORTHOPAEDIC AND TRAUMA SURGERY
- The promotion of osteointegration under diabetic conditions using chitosan/hydroxyapatite composite coating on porous titanium surfaces
- (2014) Xiang-Yu Ma et al. BIOMATERIALS
- Highly oriented carbon fiber–polymer composites via additive manufacturing
- (2014) Halil L. Tekinalp et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Development of a Ku-Band Corrugated Conical Horn Using 3-D Print Technology
- (2014) Jia-Chi Samuel Chieh et al. IEEE Antennas and Wireless Propagation Letters
- A 3-D Luneburg Lens Antenna Fabricated by Polymer Jetting Rapid Prototyping
- (2014) Min Liang et al. IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION
- Selective Laser Melting of Soda-Lime Glass Powder
- (2014) Miranda Fateri et al. International Journal of Applied Ceramic Technology
- Additive Manufacturing: Making Imagination the Major Limitation
- (2014) Yuwei Zhai et al. JOM
- Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process
- (2014) Seyeon Hwang et al. JOURNAL OF ELECTRONIC MATERIALS
- Additive Manufacturing of Glass
- (2014) Junjie Luo et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Dynamic behaviour of high strength steel parts developed through laser assisted direct metal deposition
- (2014) Syed H. Riza et al. MATERIALS & DESIGN
- The role of a low-energy–density re-scan in fabricating crack-free Al85Ni5Y6Co2Fe2 bulk metallic glass composites via selective laser melting
- (2014) X.P. Li et al. MATERIALS & DESIGN
- Bioinspired structural materials
- (2014) Ulrike G. K. Wegst et al. NATURE MATERIALS
- High-strength cellular ceramic composites with 3D microarchitecture
- (2014) J. Bauer et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Strong, lightweight, and recoverable three-dimensional ceramic nanolattices
- (2014) L. R. Meza et al. SCIENCE
- Ultralight, ultrastiff mechanical metamaterials
- (2014) X. Zheng et al. SCIENCE
- Application of a 3D printed customized implant for canine cruciate ligament treatment by tibial tuberosity advancement
- (2014) Miguel Castilho et al. Biofabrication
- Overcoming the brittleness of glass through bio-inspiration and micro-architecture
- (2014) M. Mirkhalaf et al. Nature Communications
- Active Printed Materials for Complex Self-Evolving Deformations
- (2014) Dan Raviv et al. Scientific Reports
- Tough Composites Inspired by Mineralized Natural Materials: Computation, 3D printing, and Testing
- (2013) Leon S. Dimas et al. ADVANCED FUNCTIONAL MATERIALS
- 25th Anniversary Article: The Evolution of Electronic Skin (E-Skin): A Brief History, Design Considerations, and Recent Progress
- (2013) Mallory L. Hammock et al. ADVANCED MATERIALS
- 3D Printing of Interdigitated Li-Ion Microbattery Architectures
- (2013) Ke Sun et al. ADVANCED MATERIALS
- Microstructure and mechanical properties of hybrid fabricated 1Cr12Ni2WMoVNb steel by laser melting deposition
- (2013) Yudai Wang et al. Chinese Journal of Aeronautics
- Effects of extreme surface roughness on 3D printed horn antenna
- (2013) C.R. Garcia et al. ELECTRONICS LETTERS
- Additive manufacturing of zirconia parts by indirect selective laser sintering
- (2013) Khuram Shahzad et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- A review of shape memory alloy research, applications and opportunities
- (2013) Jaronie Mohd Jani et al. MATERIALS & DESIGN
- Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting
- (2013) Chunze Yan et al. MATERIALS & DESIGN
- Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
- (2013) H. Attar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Processing metallic glasses by selective laser melting
- (2013) Simon Pauly et al. Materials Today
- Bone tissue engineering using 3D printing
- (2013) Susmita Bose et al. Materials Today
- Light-Controlled Graphene-Elastin Composite Hydrogel Actuators
- (2013) Eddie Wang et al. NANO LETTERS
- Actuators based on liquid crystalline elastomer materials
- (2013) Hongrui Jiang et al. Nanoscale
- Fabrication and deformation of three-dimensional hollow ceramic nanostructures
- (2013) Dongchan Jang et al. NATURE MATERIALS
- Terahertz plasmonic waveguides created via 3D printing
- (2013) Shashank Pandey et al. OPTICS EXPRESS
- Photo-Responsive Shape-Memory and Shape-Changing Liquid-Crystal Polymer Networks
- (2013) Danish Iqbal et al. Materials
- Hidden contributions of the enamel rods on the fracture resistance of human teeth
- (2012) M. Yahyazadehfar et al. Acta Biomaterialia
- Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
- (2012) K.N. Amato et al. ACTA MATERIALIA
- Self-assembly of montmorillonite platelets during drying
- (2012) P Walley et al. Bioinspiration & Biomimetics
- Silicon-containing polymer-derived ceramic nanocomposites (PDC-NCs): preparative approaches and properties
- (2012) Emanuel Ionescu et al. CHEMICAL SOCIETY REVIEWS
- Silicone rubber ablative composites improved with zirconium carbide or zirconia
- (2012) Dong Yang et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Developments in investment casting process—A review
- (2012) Sarojrani Pattnaik et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Multifunctional advanced ceramics from preceramic polymers and nano-sized active fillers
- (2012) P. Colombo et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Diffusion induced stresses in buckling battery electrodes
- (2012) Tanmay K. Bhandakkar et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Hydrogels in sensing applications
- (2012) Daniel Buenger et al. PROGRESS IN POLYMER SCIENCE
- Selective laser melting (SLM) of gold (Au)
- (2012) Mushtaq Khan et al. RAPID PROTOTYPING JOURNAL
- Polymer-derived SiCN and SiOC ceramics – structure and energetics at the nanoscale
- (2012) Gabriela Mera et al. Journal of Materials Chemistry A
- Bioinspired Strong and Highly Porous Glass Scaffolds
- (2011) Qiang Fu et al. ADVANCED FUNCTIONAL MATERIALS
- Honeycomb-Structured Silicon: Remarkable Morphological Changes Induced by Electrochemical (De)Lithiation
- (2011) Loïc Baggetto et al. ADVANCED MATERIALS
- Co-Continuous Composite Materials for Stiffness, Strength, and Energy Dissipation
- (2011) Lifeng Wang et al. ADVANCED MATERIALS
- Modeling of grain refinement in aluminum and copper subjected to cutting
- (2011) Hongtao Ding et al. COMPUTATIONAL MATERIALS SCIENCE
- Selective Laser Melting (SLM) of pure gold
- (2011) Mushtaq Khan et al. GOLD BULLETIN
- Laser solid forming Zr-based bulk metallic glass
- (2011) Gaolin Yang et al. INTERMETALLICS
- Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
- (2011) M. Nikzad et al. MATERIALS & DESIGN
- Direct metal deposition (DMD) of H13 tool steel on copper alloy substrate: Evaluation of mechanical properties
- (2011) M. Khalid Imran et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The conflicts between strength and toughness
- (2011) Robert O. Ritchie NATURE MATERIALS
- The guide to glass 3D printing: developments, methods, diagnostics and results
- (2011) Grant Marchelli et al. RAPID PROTOTYPING JOURNAL
- Strong Influence of Polymer Architecture on the Microstructural Evolution of Hafnium-Alkoxide-Modified Silazanes upon Ceramization
- (2011) Benjamin Papendorf et al. Small
- Can nanoparticles really enhance thermal stability of polymers? Part II: An overview on thermal decomposition of polycondensation polymers
- (2011) D. Bikiaris THERMOCHIMICA ACTA
- Tablet-level origin of toughening in abalone shells and translation to synthetic composite materials
- (2011) Horacio D. Espinosa et al. Nature Communications
- Electric insulation of a FeSiBC soft magnetic amorphous powder by a wet chemical method: Identification of the oxide layer and its thickness control
- (2010) S. Nakahara et al. ACTA MATERIALIA
- Two-Photon Lithography of Sub-Wavelength Metallic Structures in a Polymer Matrix
- (2010) Shobha Shukla et al. ADVANCED MATERIALS
- Template Synthesis of 3D High-Temperature Silicon-Oxycarbide and Silicon-Carbide Ceramic Photonic Crystals from Interference Lithographically Patterned Organosilicates
- (2010) Yongan Xu et al. CHEMISTRY OF MATERIALS
- Design and Characterization of 60-GHz Integrated Lens Antennas Fabricated Through Ceramic Stereolithography
- (2010) Ngoc Tinh Nguyen et al. IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION
- Mechanical characterisation of miniaturised direct inkjet printed 3Y-TZP specimens for microelectronic applications
- (2010) Emre Özkol et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Non-Newtonian flow in porous media
- (2010) Taha Sochi POLYMER
- Microscale metal additive manufacturing of multi‐component medical devices
- (2010) Adam Cohen et al. RAPID PROTOTYPING JOURNAL
- 3D printing based on imaging data: review of medical applications
- (2010) F. Rengier et al. International Journal of Computer Assisted Radiology and Surgery
- Glass and Medicine
- (2010) Larry L. Hench et al. International Journal of Applied Glass Science
- Fabrication of three-dimensional SiC ceramic microstructures with near-zero shrinkage via dual crosslinking induced stereolithography
- (2009) Sungjune Park et al. CHEMICAL COMMUNICATIONS
- Polycaprolactone coated porous tricalcium phosphate scaffolds for controlled release of protein for tissue engineering
- (2009) Weichang Xue et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Infrared-Triggered Actuators from Graphene-Based Nanocomposites
- (2009) Jiajie Liang et al. Journal of Physical Chemistry C
- Polymer-Derived SiOC/ZrO2Ceramic Nanocomposites with Excellent High-Temperature Stability
- (2009) Emanuel Ionescu et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Summary of the primer on tumor immunology and the biological therapy of cancer
- (2009) Yufeng Li et al. Journal of Translational Medicine
- The mechanical behaviour of some molluscan hard tissues
- (2009) J. D. Currey et al. JOURNAL OF ZOOLOGY
- Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: Microstructure and mechanical properties
- (2009) Bernd Baufeld et al. MATERIALS & DESIGN
- Iron-Based Amorphous Metals: High-Performance Corrosion-Resistant Material Development
- (2009) Joseph Farmer et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
- (2009) B. Y. Ahn et al. SCIENCE
- Cellular Ti–6Al–4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting
- (2008) Peter Heinl et al. Acta Biomaterialia
- Porous Metals and Metallic Foams: Current Status and Recent Developments
- (2008) L.-P. Lefebvre et al. ADVANCED ENGINEERING MATERIALS
- Bioinspired Design and Assembly of Platelet Reinforced Polymer Films
- (2008) L. J. Bonderer et al. SCIENCE
- Tough, Bio-Inspired Hybrid Materials
- (2008) E. Munch et al. SCIENCE
- Biological materials: Structure and mechanical properties
- (2007) Marc André Meyers et al. PROGRESS IN MATERIALS SCIENCE
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started