Effects of porosity on the mechanical properties of additively manufactured components: a critical review
出版年份 2020 全文链接
标题
Effects of porosity on the mechanical properties of additively manufactured components: a critical review
作者
关键词
-
出版物
Materials Research Express
Volume 7, Issue 12, Pages 122001
出版商
IOP Publishing
发表日期
2020-11-20
DOI
10.1088/2053-1591/abcc5d
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Guidelines for the use and interpretation of adsorption isotherm models: A review
- (2020) Mohammad A. Al-Ghouti et al. JOURNAL OF HAZARDOUS MATERIALS
- Comparative Screening of the Structural and Thermomechanical Properties of FDM Filaments Comprising Thermoplastics Loaded with Cellulose, Carbon and Glass Fibers
- (2020) Alp Karakoç et al. Materials
- Improved fatigue strength of additively manufactured Ti6Al4V by surface post processing
- (2020) M. Kahlin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Analysis of the effect of internal defects on fatigue performance of additive manufactured metals
- (2020) Niloofar Sanaei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High cycle fatigue behavior and life prediction for additively manufactured 17-4 PH stainless steel: Effect of sub-surface porosity and surface roughness
- (2020) Simone Romano et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- A unified approach to model the effect of porosity and high surface roughness on the fatigue properties of additively manufactured Ti6-Al4-V alloys
- (2020) T.D. Dinh et al. Additive Manufacturing
- Compressive fatigue properties of additive-manufactured Ti-6Al-4V cellular material with different porosities
- (2020) Ming-Wei Wu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Defects as a root cause of fatigue weakening of additively manufactured AlSi10Mg components
- (2020) Paolo Ferro et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Effects of building direction and defect sensitivity on the fatigue behavior of additively manufactured H13 tool steel
- (2020) Massimo Pellizzari et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Technologies in additive manufacturing for fiber reinforced composite materials: a review
- (2020) Palanikumar K. et al. Current Opinion in Chemical Engineering
- Current status and future directions of fused filament fabrication
- (2020) Sunpreet Singh et al. Journal of Manufacturing Processes
- Quantification of porosity and microstructure and their effect on quasi-static and dynamic behavior of additively manufactured Inconel 718
- (2020) Behzad Bahrami Babamiri et al. Additive Manufacturing
- Surface roughness effects on the fatigue behaviour of gyroid cellular structures obtained by additive manufacturing
- (2020) Alejandro Yánez et al. INTERNATIONAL JOURNAL OF FATIGUE
- The trends and challenges of fiber reinforced additive manufacturing
- (2019) Ismail Fidan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Polymers for additive manufacturing and 4D-printing: Materials, methodologies, and biomedical applications
- (2019) Carmen M. González-Henríquez et al. PROGRESS IN POLYMER SCIENCE
- Additive Manufacturing of Three-Phase Syntactic Foams Containing Glass Microballoons and Air Pores
- (2019) Ashish Kumar Singh et al. JOM
- Enhancing the bearing strength of woven carbon fibre thermoplastic composites through additive manufacturing
- (2019) Andrew N. Dickson et al. COMPOSITE STRUCTURES
- Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
- (2019) Vamsi Krishna Balla et al. COMPOSITES PART B-ENGINEERING
- X-Ray tomography of additive-manufactured zirconia: processing defects – strength relations
- (2019) M. Saâdaoui et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Mechanical properties of CF-reinforced PLA parts manufactured by fused deposition modeling
- (2019) Anouar El Magri et al. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
- Influence of thermal post treatments on microstructure and oxidation behavior of EB-PBF manufactured Alloy 718
- (2019) Esmaeil Sadeghi et al. MATERIALS CHARACTERIZATION
- The effect of surface topography and porosity on the tensile fatigue of 3D printed Ti-6Al-4V fabricated by selective laser melting
- (2019) Cambre N. Kelly et al. Materials Science & Engineering C-Materials for Biological Applications
- Computed tomography based procedure for reproducible porosity measurement of additive manufactured samples
- (2019) Tomáš Zikmund et al. NDT & E INTERNATIONAL
- Additively manufactured functionally graded biodegradable porous iron
- (2019) Y. Li et al. Acta Biomaterialia
- Effect of post-treatment on the microstructure and high-temperature oxidation behaviour of additively manufactured inconel 718 alloy
- (2019) Yeon-Ji Kang et al. CORROSION SCIENCE
- Do additive manufactured parts deserve better?
- (2019) John R. Yates et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Influence of laser processing parameters on porosity in Inconel 718 during additive manufacturing
- (2019) Pankaj Kumar et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The effect of raster orientation on the static and fatigue properties of filament deposited ABS polymer
- (2019) Natalie S.F. Jap et al. INTERNATIONAL JOURNAL OF FATIGUE
- The influence of additive manufacturing processing parameters on surface roughness and fatigue life
- (2019) Joy Gockel et al. INTERNATIONAL JOURNAL OF FATIGUE
- On investigation of rheological, mechanical and morphological characteristics of waste polymer-based feedstock filament for 3D printing applications
- (2019) Sudhir Kumar et al. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
- A modified BET equation to investigate supercritical methane adsorption mechanisms in shale
- (2019) Shangwen Zhou et al. MARINE AND PETROLEUM GEOLOGY
- Process-property-geometry correlations for additively-manufactured Ti–6Al–4V sheets
- (2019) Behzad Fotovvati et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- 3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
- (2019) Nesma T. Aboulkhair et al. PROGRESS IN MATERIALS SCIENCE
- A comprehensive review of the adsorption mechanisms and factors influencing the adsorption process from the perspective of bioethanol dehydration
- (2019) Samira Karimi et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Micromechanical modeling of irreversible thermal strain
- (2019) Tone D’Amico et al. Additive Manufacturing
- Role of compatibilizer in 3D printing of polymer blends
- (2019) Matthew E. Spreeman et al. Additive Manufacturing
- Simulation and validation of thermography inspection for components produced by additive manufacturing
- (2019) Marta S. Carvalho et al. APPLIED THERMAL ENGINEERING
- Additive manufacturing high performance graphene-based composites: A review
- (2019) Yan Li et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Additive manufacturing of polymer composites: Processing and modeling approaches
- (2019) A. El Moumen et al. COMPOSITES PART B-ENGINEERING
- Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties
- (2019) J.M. Chacón et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Porosity analysis of carbon fibre-reinforced polymer laminates manufactured using automated fibre placement
- (2019) Ebrahim Oromiehie et al. JOURNAL OF COMPOSITE MATERIALS
- Mechanical properties of an additive manufactured CF-PLA/ABS hybrid composite sheet
- (2019) Syed Waqar Ahmed et al. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
- Relationship between manufacturing defects and fatigue properties of additive manufactured austenitic stainless steel
- (2019) Thale R. Smith et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure-topology relationship effects on the quasi-static and dynamic behavior of additively manufactured lattice structures
- (2019) Kavan Hazeli et al. MATERIALS & DESIGN
- Interrupted fatigue testing with periodic tomography to monitor porosity defects in wire + arc additive manufactured Ti-6Al-4V
- (2019) Romali Biswal et al. Additive Manufacturing
- 3D printing of high density polyethylene by fused filament fabrication
- (2019) Carl G. Schirmeister et al. Additive Manufacturing
- Binder jetting: A review of process, materials, and methods
- (2019) Mohsen Ziaee et al. Additive Manufacturing
- In-Process monitoring of porosity during laser additive manufacturing process
- (2019) Bin Zhang et al. Additive Manufacturing
- Numerical simulations of the mesostructure formation in material extrusion additive manufacturing
- (2019) Marcin P. Serdeczny et al. Additive Manufacturing
- Reinforcement of material extrusion 3D printed polycarbonate using continuous carbon fiber
- (2019) M.N. Jahangir et al. Additive Manufacturing
- Modification the surface quality and mechanical properties by laser polishing of Al/PLA part manufactured by fused deposition modeling
- (2019) Lan Chen et al. APPLIED SURFACE SCIENCE
- Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites
- (2019) M. Heidari-Rarani et al. COMPOSITES PART B-ENGINEERING
- Process optimization and stochastic modeling of void contents and mechanical properties in additively manufactured composites
- (2019) Easir Arafat Papon et al. COMPOSITES PART B-ENGINEERING
- Anisotropic response in mechanical and corrosion properties of hastelloy X fabricated by selective laser melting
- (2019) Decheng Kong et al. CONSTRUCTION AND BUILDING MATERIALS
- Correlation between pore characteristics and tensile bond strength of additive manufactured mortar using X-ray computed tomography
- (2019) Hojae Lee et al. CONSTRUCTION AND BUILDING MATERIALS
- Optimization of an additively manufactured functionally graded lattice structure with liquid cooling considering structural performances
- (2019) Akihiro Takezawa et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Metal additive manufacturing in the commercial aviation industry: A review
- (2019) Annamaria Gisario et al. JOURNAL OF MANUFACTURING SYSTEMS
- Predicting the output dimensions, porosity and elastic modulus of additive manufactured biomaterial structures targeting orthopedic implants
- (2019) F. Bartolomeu et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical and corrosion behavior of titanium alloys additively manufactured by selective laser melting – A comparison between nearly β titanium, α titanium and α + β titanium
- (2019) Libo Zhou et al. OPTICS AND LASER TECHNOLOGY
- Impacts of process-induced porosity on material properties of copper made by binder jetting additive manufacturing
- (2019) Ashwath Yegyan Kumar et al. MATERIALS & DESIGN
- In-process monitoring of porosity in additive manufacturing using optical emission spectroscopy
- (2019) Mohammad Montazeri et al. IISE Transactions
- Factors that affect the properties of additively-manufactured AlSi10Mg: Porosity versus microstructure
- (2019) Wen Hao Kan et al. Additive Manufacturing
- Fatigue strength prediction of laser powder bed fusion processed Inconel 625 specimens with intentionally-seeded porosity: Feasibility study
- (2019) J.-R. Poulin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Determination of the influence of a stress-relief heat treatment and additively manufactured surface on the fatigue behavior of selectively laser melted AISI 316L by using efficient short-time procedures
- (2019) Bastian Blinn et al. INTERNATIONAL JOURNAL OF FATIGUE
- Phase-field-model-based analysis of the effects of powder particle on porosities and densities in selective laser sintering additive manufacturing
- (2019) Z. Zhang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Review on design and structural optimisation in additive manufacturing: Towards next-generation lightweight structures
- (2019) János Plocher et al. MATERIALS & DESIGN
- Ply and interlaminar behaviours of 3D printed continuous carbon fibre-reinforced thermoplastic laminates; effects of processing conditions and microstructure
- (2019) M. Iragi et al. Additive Manufacturing
- Production and characterization of PEEK/IF-WS2 nanocomposites for additive manufacturing: Simultaneous improvement in processing characteristics and material properties
- (2019) Atefeh Golbang et al. Additive Manufacturing
- A review of mechanical properties of additively manufactured Inconel 718
- (2019) E. Hosseini et al. Additive Manufacturing
- Effects of process parameters on porosity in laser powder bed fusion revealed by X-ray tomography
- (2019) Anton du Plessis Additive Manufacturing
- Additively manufactured biodegradable porous iron
- (2018) Y. Li et al. Acta Biomaterialia
- Thermal conductivities of plain woven C/SiC composite: Micromechanical model considering PyC interphase thermal conductance and manufacture-induced voids
- (2018) Yingjie Xu et al. COMPOSITE STRUCTURES
- Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing
- (2018) Martin Spoerk et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Modeling and simulation of large, conformal, porosity-graded and lightweight lattice structures made by additive manufacturing
- (2018) Patrick Terriault et al. FINITE ELEMENTS IN ANALYSIS AND DESIGN
- Visualizing, analyzing, and managing voids in the material extrusion process
- (2018) Hasti Eiliat et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V
- (2018) Jonathan Pegues et al. INTERNATIONAL JOURNAL OF FATIGUE
- Additive Manufacturing of Syntactic Foams: Part 1: Development, Properties, and Recycling Potential of Filaments
- (2018) Ashish Kumar Singh et al. JOM
- Mechanical properties of fiber reinforced polymer composites: A comparative study of conventional and additive manufacturing methods
- (2018) Kuldeep Agarwal et al. JOURNAL OF COMPOSITE MATERIALS
- Effects of post homogeneity heat treatment processes on microstructure evolution behavior and tensile mechanical properties of laser additive manufactured ultrahigh-strength AerMet100 steel
- (2018) Xian-zhe Ran et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of last stage heat treatment on microstructure and mechanical properties of laser additive manufactured AF1410 steel
- (2018) Yifan Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Relating porosity to fatigue failure in additively manufactured alloy 718
- (2018) Luke Sheridan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of hot isostatic pressing on the microstructure and mechanical properties of additive manufactured Al x CoCrFeNi high entropy alloys
- (2018) Jithin Joseph et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Interlayer diffusion of surface segregating additives to improve the isotropy of fused deposition modeling products
- (2018) Neiko P. Levenhagen et al. POLYMER
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Printing and characterisation of Kagome lattice structures by fused deposition modelling
- (2018) Rinoj Gautam et al. MATERIALS & DESIGN
- Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics
- (2018) G.D. Goh et al. MATERIALS & DESIGN
- A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
- (2018) Haniyeh Fayazfar et al. MATERIALS & DESIGN
- Layer-wise Spatial Modeling of Porosity in Additive Manufacturing
- (2018) Jia (Peter) Liu et al. IISE Transactions
- Additive manufacturing of woven carbon fibre polymer composites
- (2018) Andrew N. Dickson et al. COMPOSITE STRUCTURES
- Influence of post treatment on microstructure, porosity and mechanical properties of additive manufactured H13 tool steel
- (2018) M. Åsberg et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of Selective Laser Melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties
- (2018) K. Moussaoui et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy
- (2018) N.O. Larrosa et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Stochastic fracture of additively manufactured porous composites
- (2018) Özgür Keleş et al. Scientific Reports
- From microstructural design to surface engineering: A tailored approach for improving fatigue life of additively manufactured meta-biomaterials
- (2018) S.M. Ahmadi et al. Acta Biomaterialia
- Fracture toughness enhancement of carbon fiber–reinforced polymer composites utilizing additive manufacturing fabrication
- (2018) Firas Akasheh et al. JOURNAL OF ELASTOMERS AND PLASTICS
- Mechanical performance of additively-manufactured anisotropic and isotropic smooth shell-lattice materials: Simulations & experiments
- (2018) Colin Bonatti et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy
- (2018) Luca Girelli et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Interfacial interactions in PMMA/silica nanocomposites enhance the performance of parts created by Fused Filament Fabrication
- (2018) Dayton P. Street et al. POLYMER
- Structural optimization under internal porosity constraints using topological derivatives
- (2018) J. Martínez-Frutos et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Design considerations and modeling of fiber reinforced 3D printed parts
- (2018) Nekoda van de Werken et al. COMPOSITES PART B-ENGINEERING
- The selection of process parameters in additive manufacturing for aerospace alloys
- (2017) Mostafa Yakout et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Additive manufacturing in the context of structural integrity
- (2017) Michael Gorelik INTERNATIONAL JOURNAL OF FATIGUE
- Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V
- (2017) Ross Cunningham et al. JOM
- Effects of HIP on microstructural heterogeneity, defect distribution and mechanical properties of additively manufactured EBM Ti-48Al-2Cr-2Nb
- (2017) Mohsen Seifi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Induced porosity in Super Alloy 718 through the laser additive manufacturing process: Microstructure and mechanical properties
- (2017) Mario Valdez et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Additive manufacturing of thermoplastic matrix composites using fused deposition modeling: A comparison of two reinforcements
- (2017) Fuda Ning et al. JOURNAL OF COMPOSITE MATERIALS
- Influence of Powder Characteristics on Formation of Porosity in Additive Manufacturing of Ti-6Al-4V Components
- (2017) Maurizio Iebba et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Structural components manufactured by Selective Laser Melting and Investment Casting—Impact of the process route on the damage mechanism under cyclic loading
- (2017) S. Leuders et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Improving surface finish and wear resistance of additive manufactured nickel-titanium by ultrasonic nano-crystal surface modification
- (2017) Chi Ma et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- State-of-the-art of fiber-reinforced polymers in additive manufacturing technologies
- (2017) Thomas Hofstätter et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Effect of laser processing parameters on porosity, microstructure and mechanical properties of porous Mg-Ca alloys produced by laser additive manufacturing
- (2017) Chang Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical behavior of selective laser melted 316L stainless steel
- (2017) Jyoti Suryawanshi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and anisotropic mechanical properties of EBM manufactured Inconel 718 and effects of post heat treatments
- (2017) Dunyong Deng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Porosity measurements by X-ray computed tomography: Accuracy evaluation using a calibrated object
- (2017) Petr Hermanek et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Investigating water adsorption onto natural mineral dust particles: Linking DRIFTS experiments and BET theory
- (2017) Nitesh Joshi et al. Aeolian Research
- Mechanical characterization of 3D printed polymers for fiber reinforced polymers processing
- (2017) Daniel-Alexander Türk et al. MATERIALS & DESIGN
- Modelling and characterization of a porosity graded lattice structure for additively manufactured biomaterials
- (2017) Mathieu Dumas et al. MATERIALS & DESIGN
- 3D soft auxetic lattice structures fabricated by selective laser sintering: TPU powder evaluation and process optimization
- (2017) Shangqin Yuan et al. MATERIALS & DESIGN
- Additive construction: State-of-the-art, challenges and opportunities
- (2016) Nathalie Labonnote et al. AUTOMATION IN CONSTRUCTION
- Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
- (2016) Mary Kathryn Thompson et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Homogenization of material properties in additively manufactured structures
- (2016) Xingchen Liu et al. COMPUTER-AIDED DESIGN
- The status, challenges, and future of additive manufacturing in engineering
- (2015) Wei Gao et al. COMPUTER-AIDED DESIGN
- A new computational intelligence approach in formulation of functional relationship of open porosity of the additive manufacturing process
- (2015) A. Garg et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Permeability and strength of a porous metal structure fabricated by additive manufacturing
- (2015) Tatsuaki Furumoto et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Failure mechanisms of additively manufactured porous biomaterials: Effects of porosity and type of unit cell
- (2015) J. Kadkhodapour et al. Journal of the Mechanical Behavior of Biomedical Materials
- Young’s modulus and volume porosity relationships for additive manufacturing applications
- (2013) J. A. Choren et al. JOURNAL OF MATERIALS SCIENCE
- Fabrication of Metal and Alloy Components by Additive Manufacturing: Examples of 3D Materials Science
- (2013) Lawrence E. Murr et al. Journal of Materials Research and Technology-JMR&T
- Density and porosity control of sintered 316L stainless steel parts produced by additive manufacturing
- (2012) B Verlee et al. POWDER METALLURGY
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started