Evaluation of heat sink performance using PCM and vapor chamber/heat pipe

Numerical study on convective heat transfer of nanofluid in a minichannel heat sink with micro-encapsulated PCM-cooled ceiling

(2020) Wei-Mon Yan et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Studies on optimum fins number in PCM-based heat sinks

(2019) Rasool Kalbasi et al.   ENERGY

Experimental study of cooling performance of water-based alumina nanofluid in a minichannel heat sink with MEPCM layer embedded in its ceiling

(2019) C.J. Ho et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Investigation of a computer CPU heat sink under laminar forced convection using a structural stability method

(2019) Alireza Moradikazerouni et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Combined effects of inclination angle and fin number on thermal performance of a PCM-based heat sink

(2019) Mustafa Yusuf Yazici et al.   APPLIED THERMAL ENGINEERING

On the effective thermal conductivity of the vapour region in vapour chamber heat spreaders

(2019) Jason Velardo et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Thermal analysis of an inclined heat sink with finned PCM container for solar applications

(2019) Tushar Sathe et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Transient performance of a PCM-based heat sink with a partially filled metal foam: Effects of the filling height ratio

(2018) Zi-Qin Zhu et al.   APPLIED THERMAL ENGINEERING

Natural convection in a cross-fin heat sink

(2018) Shangsheng Feng et al.   APPLIED THERMAL ENGINEERING

Finned heat pipe assisted low melting point metal PCM heat sink against extremely high power thermal shock

(2018) Xiao-Hu Yang et al.   ENERGY CONVERSION AND MANAGEMENT

Investigation of the thermal performance of a novel flat heat pipe sink with multiple heat sources

(2018) Xiaoxing Han et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Thermal performance evaluation of thin vapor chamber

(2018) S.W. Chang et al.   APPLIED THERMAL ENGINEERING

Thermal management of high-power LEDs based on integrated heat sink with vapor chamber

(2017) Yong Tang et al.   ENERGY CONVERSION AND MANAGEMENT

Experimental investigation of n-eicosane based circular pin-fin heat sinks for passive cooling of electronic devices

(2017) Hafiz Muhammad Ali et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Heat transfer enhancement of LEDs with a combination of piezoelectric fans and a heat sink

(2017) S.F. Sufian et al.   MICROELECTRONICS RELIABILITY

Application of TCE-PCM based heat sinks for cooling of electronic components: A review

(2016) Santosh Kumar Sahoo et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

A numerical method for PCM-based pin fin heat sinks optimization

(2015) R. Pakrouh et al.   ENERGY CONVERSION AND MANAGEMENT

Thermal cooling enhancement techniques for electronic components

(2015) P. Naphon et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Theoretical and experimental estimation of limiting input heat flux for thermoelectric power generators with passive cooling

(2015) Ashwin Date et al.   SOLAR ENERGY

Electricity generation from an exhaust heat recovery system utilising thermoelectric cells and heat pipes

(2014) B. Orr et al.   APPLIED THERMAL ENGINEERING

Experimental investigation of inserts configurations and PCM type on the thermal performance of PCM based heat sinks

(2013) Saad Mahmoud et al.   APPLIED ENERGY

Thermal optimization of PCM based pin fin heat sinks: An experimental study

(2013) Rajesh Baby et al.   APPLIED THERMAL ENGINEERING

Numerical optimization of a PCM-based heat sink with internal fins

(2013) Peleg P. Levin et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Application of two-phase vapor chamber technique for hard disk drive cooling of PCs

(2012) P. Naphon et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Field thermal performance of naturally ventilated solar roof with PCM heat sink

(2012) Jan Kośny et al.   SOLAR ENERGY

Experimental and numerical studies on performance of PCM-based heat sink with different configurations of internal fins

(2011) S.F. Hosseinizadeh et al.   APPLIED THERMAL ENGINEERING

Thermal optimization of plate-fin heat sinks with fins of variable thickness under natural convection

(2011) Dong-Kwon Kim   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Electric power generation from solar pond using combined thermosyphon and thermoelectric modules

(2011) Randeep Singh et al.   SOLAR ENERGY

Natural convection in an internally finned phase change material heat sink for the thermal management of photovoltaics

(2011) M.J. Huang et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Heat pipe with PCM for electronic cooling

(2010) Ying-Che Weng et al.   APPLIED ENERGY

Thermal performance of plate-fin vapor chamber heat sinks

(2010) Hung-Yi Li et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Thermal optimization of plate-fin heat sinks with variable fin thickness

(2010) Dong-Kwon Kim et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Development of 30Watt high-power LEDs vapor chamber-based plate

(2010) Jung-Chang Wang et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Cooling of portable hand-held electronic devices using phase change materials in finned heat sinks

(2009) S.C. Fok et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Experimental research on heat transfer mechanism of heat sink with composite phase change materials

(2008) Huibin Yin et al.   ENERGY CONVERSION AND MANAGEMENT

Numerical study of pin-fin heat sink with un-uniform fin height design

(2008) Yue-Tzu Yang et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Studies on Optimum Distribution of Fins in Heat Sinks Filled With Phase Change Materials

(2008) S. K. Saha et al.   JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME