标题
A laboratory investigation of cutting damage to the steel-concrete interface
作者
关键词
Steel-concrete interface (SCI), Cutting damage, Heat-affected zone, Hardness difference, Sample preparation, Corrosion
出版物
CEMENT AND CONCRETE RESEARCH
Volume 138, Issue -, Pages 106229
出版商
Elsevier BV
发表日期
2020-09-27
DOI
10.1016/j.cemconres.2020.106229
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Effect of design parameters on microstructure of steel-concrete interface in reinforced concrete
- (2019) Fangjie Chen et al. CEMENT AND CONCRETE RESEARCH
- Evaluation of drying methods by nitrogen adsorption
- (2019) Zhidong Zhang et al. CEMENT AND CONCRETE RESEARCH
- Kinetics of electrochemical dissolution of metals in porous media
- (2019) Matteo Stefanoni et al. NATURE MATERIALS
- The effect of the steel–concrete interface on chloride-induced corrosion initiation in concrete: a critical review by RILEM TC 262-SCI
- (2019) Ueli M. Angst et al. MATERIALS AND STRUCTURES
- The corrosion rate and microstructure of Portland cement and calcium aluminate cement-based concrete mixtures in outfall sewers: A comparative study
- (2019) Moses W. Kiliswa et al. CEMENT AND CONCRETE RESEARCH
- Determination of chloride threshold initiating corrosion: A new set-up taking the localized aspect of corrosion into account
- (2019) Chantal Chalhoub et al. CEMENT AND CONCRETE RESEARCH
- A discussion of the paper “Effect of design parameters on microstructure of steel-concrete interface in reinforced concrete”
- (2019) Zhidong Zhang et al. CEMENT AND CONCRETE RESEARCH
- Quantification of non-uniform distribution and growth of corrosion products at steel-concrete interface
- (2019) Fangjie Chen et al. CONSTRUCTION AND BUILDING MATERIALS
- Detection and segmentation of mechanical damage in concrete with X-Ray microtomography
- (2018) Colin M. Loeffler et al. MATERIALS CHARACTERIZATION
- Report of TC 238-SCM: hydration stoppage methods for phase assemblage studies of blended cements—results of a round robin test
- (2018) Ruben Snellings et al. MATERIALS AND STRUCTURES
- The steel–concrete interface
- (2017) Ueli M. Angst et al. MATERIALS AND STRUCTURES
- Spatial distribution of crystalline corrosion products formed during corrosion of stainless steel in concrete
- (2015) Marijana Serdar et al. CEMENT AND CONCRETE RESEARCH
- Real-time measurements of temperature, pressure and moisture profiles in High-Performance Concrete exposed to high temperatures during neutron radiography imaging
- (2015) N. Toropovs et al. CEMENT AND CONCRETE RESEARCH
- On the limitations of predicting the ohmic resistance in a macro-cell in mortar from bulk resistivity measurements
- (2015) K. Hornbostel et al. CEMENT AND CONCRETE RESEARCH
- SURFACE ROUGHNESS AND CUTTING FORCES IN TURNING OF TOOL STEEL WITH MIXED CERAMIC AND CUBIC BORON NITRIDE CUTTING TOOLS
- (2015) Bekir Yalçın TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING
- The influence of different drying techniques on the water sorption properties of cement-based materials
- (2014) D. Snoeck et al. CEMENT AND CONCRETE RESEARCH
- Beam hardening correction for X-ray computed tomography of heterogeneous natural materials
- (2014) Richard A. Ketcham et al. COMPUTERS & GEOSCIENCES
- Penetration of corrosion products and corrosion-induced cracking in reinforced cementitious materials: Experimental investigations and numerical simulations
- (2013) Alexander Michel et al. CEMENT & CONCRETE COMPOSITES
- Moisture dependence of thermal expansion in cement-based materials at early ages
- (2013) Mateusz Wyrzykowski et al. CEMENT AND CONCRETE RESEARCH
- Experimental investigation of the relation between damage at the concrete-steel interface and initiation of reinforcement corrosion in plain and fibre reinforced concrete
- (2013) A. Michel et al. CORROSION SCIENCE
- Controlling the coefficient of thermal expansion of cementitious materials – A new application for superabsorbent polymers
- (2012) Mateusz Wyrzykowski et al. CEMENT & CONCRETE COMPOSITES
- Influence of porosity on compressive and tensile strength of cement mortar
- (2012) Xudong Chen et al. CONSTRUCTION AND BUILDING MATERIALS
- Untersuchungen zum kritischen korrosionsauslösenden Chloridgehalt unter Berücksichtigung der Kontaktzone zwischen Stahl und Beton
- (2011) Jörg Harnisch et al. Beton- und Stahlbetonbau
- Comparison of methods for arresting hydration of cement
- (2011) Jie Zhang et al. CEMENT AND CONCRETE RESEARCH
- The relationship between porosity and strength for porous concrete
- (2011) C. Lian et al. CONSTRUCTION AND BUILDING MATERIALS
- Influence of steel–concrete interface condition on galvanic corrosion currents in carbonated concrete
- (2010) A. Nasser et al. CORROSION SCIENCE
- On the penetration of corrosion products from reinforcing steel into concrete due to chloride-induced corrosion
- (2010) H.S. Wong et al. CORROSION SCIENCE
- Cutting process of composite materials: An experimental study
- (2010) Rafal Rusinek INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS
- Waterjet—An innovative tool for manufacturing
- (2009) Janet Folkes JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Initiation of chloride-induced corrosion of steel in concrete: role of the interfacial zone
- (2009) C. L. Page MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started