标题
Advances in anisotropy of plastic behaviour and formability of sheet metals
作者
关键词
-
出版物
International Journal of Material Forming
Volume 13, Issue 5, Pages 749-787
出版商
Springer Science and Business Media LLC
发表日期
2020-08-24
DOI
10.1007/s12289-020-01580-x
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Model for description of nonlinear unloading-reloading stress-strain response with special reference to plastic-strain dependent chord modulus
- (2020) Fusahito Yoshida et al. INTERNATIONAL JOURNAL OF PLASTICITY
- BBC05 with non-integer exponent and ambiguities in Nakajima yield surface calibration
- (2020) Johan Pilthammar et al. International Journal of Material Forming
- Determination of Yield Surfaces in Accordance With ISO 16842 Using an Optimized Cruciform Test Specimen
- (2020) L. Nasdala et al. EXPERIMENTAL MECHANICS
- Distortional plasticity framework with application to advanced high strength steel
- (2020) Frédéric Barlat et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- An analytical model for necking strains in stretched plates under dynamic biaxial loading
- (2020) N. Jacques INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Optimized and validated prediction of plastic yielding supported by cruciform experiments and crystal plasticity
- (2020) Holger Hippke et al. International Journal of Material Forming
- Novel experimental method to determine the limit strain by means of thickness variation
- (2019) R.A. Iquilio et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Experimental determination and numerical prediction of necking and fracture forming limit curves of laminated Al/Cu sheets using a damage plasticity model
- (2019) Ali Zahedi et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Forming limit evaluation by considering through-thickness normal stress: Theory and modeling
- (2019) Qi Hu et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- New mathematical results and explicit expressions in terms of the stress components of Barlat et al. (1991) orthotropic yield criterion
- (2019) Oana Cazacu INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Formability limits of high-strength H240LA steel sheets under stress/strain gradients
- (2019) L.H. Martínez-Palmeth et al. MECHANICS OF MATERIALS
- Anisotropic plasticity characterization of 6000- and 7000-series aluminum sheet alloys at various strain rates
- (2019) Taamjeed Rahmaan et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- On anisotropic plasticity models using linear transformations on the deviatoric stress: Physical constraints on plastic flow in generalized plane strain
- (2019) C. Butcher et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Developments of the Marciniak-Kuczynski model for sheet metal formability: A review
- (2019) Dorel Banabic et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Prediction of plastic anisotropy of textured polycrystalline sheets using a new single-crystal model
- (2018) Nitin Chandola et al. COMPTES RENDUS MECANIQUE
- Influence of geometric errors of guide rails and table on motion errors of hydrostatic guideways under quasi-static condition
- (2018) Penghai Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effects of normal and through-thickness shear stresses on the forming limit curves of AA3104-H19 using advanced yield criteria
- (2018) S.M. Mirfalah Nasiri et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Analysis of the bending effects and the biaxial pre-straining in sheet metal stretch forming processes for the determination of the forming limits
- (2018) Emanuela Affronti et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- On the non-linear unloading behavior of a biaxially loaded dual-phase steel sheet
- (2018) Nengxiu Deng et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Prediction of forming limits for anisotropic materials with nonlinear strain paths by an instability approach
- (2018) Qi Hu et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Plastic deformation of commercially-pure titanium: experiments and modeling
- (2018) Madhav Baral et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Plastic flow of thin-walled tubes under nonlinear tension-torsion loading paths and an improved pseudo-corner model
- (2018) Kengo Yoshida et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A combined isotropic, kinematic and distortional hardening model for aluminum and steels under complex strain-path changes
- (2018) Jisheng Qin et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Mechanical response of stainless steel subjected to biaxial load path changes: Cruciform experiments and multi-scale modeling
- (2018) Manas V. Upadhyay et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A crystal plasticity model for describing the anisotropic hardening behavior of steel sheets during strain-path changes
- (2018) Hwigeon Kim et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Anisotropic fracture forming limit diagram considering non-directionality of the equi-biaxial fracture strain
- (2018) Namsu Park et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- New yield criteria for isotropic and textured metallic materials
- (2018) Oana Cazacu INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Measurement of the strength differential effect of DP980 steel sheet and experimental validation using pure bending test
- (2018) Taiki Maeda et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Evaluation of the forming limit curve of medium steel plate based on non-constant through-thickness normal stress
- (2018) B.L. Ma et al. Journal of Manufacturing Processes
- A comparative study of the extended forming limit diagrams considering strain path, through-thickness normal and shear stress
- (2018) Mozhdeh Erfanian et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Numerical modeling for accurate prediction of strain localization in hole expansion of a steel sheet
- (2018) Jeong-Yeon Lee et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- An efficient full-field crystal plasticity-based M–K framework to study the effect of 3D microstructural features on the formability of polycrystalline materials
- (2018) Jaspreet S Nagra et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Extension of the sensitivity-based virtual fields to large deformation anisotropic plasticity
- (2018) Aleksander Marek et al. International Journal of Material Forming
- Hot working of Ti-6Al-4V with a complex initial microstructure
- (2018) Michael O. Bodunrin et al. International Journal of Material Forming
- On the synergy between physical and virtual sheet metal testing: calibration of anisotropic yield functions using a microstructure-based plasticity model
- (2018) S. Coppieters et al. International Journal of Material Forming
- Size effect on the yield behavior of metal foil under multiaxial stress states: Experimental investigation and modelling
- (2018) C. Cheng et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- A comparison study on forming limit prediction methods for hot stamping of 7075 aluminum sheet
- (2018) Ning Wang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Stress integration-based on finite difference method and its application for anisotropic plasticity and distortional hardening under associated and non-associated flow rules
- (2018) Hyunsung Choi et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Impact of non-Schmid stress components present in the yield criterion for bcc metals on the activity of {110}〈111〉 slip systems
- (2018) Roman Gröger et al. COMPUTATIONAL MATERIALS SCIENCE
- A thermal forming limit prediction method considering material damage for 22MnB5 sheet
- (2017) Ping Hu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- An experimental and numerical investigation on the formability of AA7075 sheet in hot stamping condition
- (2017) Wenchao Xiao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigation into the shear stress, localization and fracture behaviour of DP600 and AA5182-O sheet metal alloys under elevated strain rates
- (2017) Taamjeed Rahmaan et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Evaluation of limit strain and temperature history in hot stamping of advanced high strength steels (AHSS)
- (2017) B.L. Ma et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- An efficient model for diffuse to localized necking transition in rate-dependent bifurcation analysis of metallic sheets
- (2017) Asghar Zajkani et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Theoretical and numerical investigation of the impact of out-of-plane compressive stress on sheet metal formability
- (2017) M. Ben Bettaieb et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Forming limit prediction for hot stamping processes featuring non-isothermal and complex loading conditions
- (2017) Haoxiang Gao et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Experimental and theoretical investigations of the forming limit of 5754O aluminum alloy sheet under different combined loading paths
- (2017) Haibo Wang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Characterization of forming limits at fracture with an optimized cruciform specimen: Application to DP600 steel sheets
- (2017) X. Song et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Constitutive characterization of a rare-earth magnesium alloy sheet (ZEK100-O) in shear loading: Studies of anisotropy and rate sensitivity
- (2017) A. Abedini et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Formability evaluation for sheet metals under hot stamping conditions by a novel biaxial testing system and a new materials model
- (2017) Zhutao Shao et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- An improved curvature method of detecting the onset of localized necking in Marciniak tests and its extension to Nakazima tests
- (2017) Junying Min et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Efficient fast Fourier transform-based numerical implementation to simulate large strain behavior of polycrystalline materials
- (2017) Jaspreet S. Nagra et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Material modeling of 6016-O and 6016-T4 aluminum alloy sheets and application to hole expansion forming simulation
- (2017) Toshihiko Kuwabara et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Anisotropy, tension-compression asymmetry and texture evolution of a rare-earth-containing magnesium alloy sheet, ZEK100, at different strain rates and temperatures: Experiments and modeling
- (2017) Saadi A. Habib et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Crystal-plasticity finite-element analysis of anisotropic deformation behavior in a commercially pure titanium Grade 1 sheet
- (2017) Takayuki Hama et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Fracture-based forming limit criteria for anisotropic materials in sheet metal forming
- (2017) Namsu Park et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Accurate characterization of biaxial stress-strain response of sheet metal from bulge testing
- (2017) Junying Min et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Application of the virtual fields method to the identification of the homogeneous anisotropic hardening parameters for advanced high strength steels
- (2017) Jiawei Fu et al. INTERNATIONAL JOURNAL OF PLASTICITY
- An evolving non-associated Hill48 plasticity model accounting for anisotropic hardening and r-value evolution and its application to forming limit prediction
- (2017) Junhe Lian et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Evaluation and calibration of anisotropic yield criteria in shear Loading: Constraints to eliminate numerical artefacts
- (2017) A. Abedini et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Modeling strain-path changes in aluminum and steel
- (2017) Jisheng Qin et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Effects of superimposed hydrostatic pressure on necking and fracture of tube under hydroforming
- (2017) Y. Shi et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Advanced constitutive modeling of advanced high strength steel sheets for springback prediction after double stage U-draw bending
- (2017) Jisik Choi et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Modeling of ductile fracture from shear to balanced biaxial tension for sheet metals
- (2017) Yanshan Lou et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Identification of the post-necking hardening response of rate- and temperature-dependent metals
- (2017) Paul Knysh et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- A yield criterion for cubic single crystals
- (2017) Oana Cazacu et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Forming limit in thermal cruciform biaxial tensile testing of titanium alloy
- (2017) Rui Xiao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- On the identification of an effective cross section for a cruciform specimen
- (2017) M. Härtel et al. STRAIN
- Analytical expressions for the yield stress and Lankford coefficients of polycrystalline sheets based on a new single crystal model
- (2017) Oana Cazacu et al. International Journal of Material Forming
- Investigation into the effect of material properties and arrangement of each layer on the formability of bimetallic sheets
- (2017) Roya Darabi et al. Journal of Manufacturing Processes
- Multiaxial constitutive behavior of an interstitial-free steel: Measurements through X-ray and digital image correlation
- (2016) Y. Jeong et al. ACTA MATERIALIA
- Investigation of the forming limit strains at fracture of AA5086 sheets using an in-plane biaxial tensile test
- (2016) X. Song et al. ENGINEERING FRACTURE MECHANICS
- Fracture Characterization of Rolled Sheet Alloys in Shear Loading: Studies of Specimen Geometry, Anisotropy, and Rate Sensitivity
- (2016) A. Abedini et al. EXPERIMENTAL MECHANICS
- Development of a New Biaxial Testing System for Generating Forming Limit Diagrams for Sheet Metals Under Hot Stamping Conditions
- (2016) Z. Shao et al. EXPERIMENTAL MECHANICS
- A Method of Detecting the Onset of Localized Necking Based on Surface Geometry Measurements
- (2016) J. Min et al. EXPERIMENTAL MECHANICS
- Characterization of anisotropic yield surfaces for titanium sheet using hydrostatic bulging with elliptical dies
- (2016) Bruce W. Williams et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Compensation for process-dependent effects in the determination of localized necking limits
- (2016) Junying Min et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Ductile fracture prediction for metal sheets using all-strain-based anisotropic eMMC model
- (2016) Yueqian Jia et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Forming limit curves analysis of aluminum alloy considering the through-thickness normal stress, anisotropic yield functions and strain rate
- (2016) S.M. Mirfalah-Nasiri et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- A non-quadratic constitutive model under non-associated flow rule of sheet metals with anisotropic hardening: Modeling and experimental validation
- (2016) Junying Min et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Constitutive modelling of high strength titanium alloy Ti-6Al-4 V for sheet forming applications at room temperature
- (2016) Ossama Mamdouh Badr et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Effects of anisotropy on material hardening and burst in the bulge test
- (2016) Kelin Chen et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Evaluation of Springback for DP980 S Rail Using Anisotropic Hardening Models
- (2016) Jisik Choi et al. JOM
- Experimental detection of forming limit strains on samples with multiple local necks
- (2016) Dmitry Vysochinskiy et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Post necking characterisation for sheet metal materials using full field measurement
- (2016) Stefan Marth et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of through thickness strain distribution on shear fracture hazard and its mitigation by using multilayer aluminum sheets
- (2016) Maysam Gorji et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- An improved damage evolution model to predict fracture of steel sheet at elevated temperature
- (2016) B.T. Tang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Unusual plastic deformation and damage features in titanium: Experimental tests and constitutive modeling
- (2016) Benoit Revil-Baudard et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Dual-phase steel sheets under cyclic tension–compression to large strains: Experiments and crystal plasticity modeling
- (2016) Milovan Zecevic et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Analysis of formability of Ca-added magnesium alloy sheets at low temperatures
- (2016) Se-Jong Kim et al. MATERIALS CHARACTERIZATION
- Identification of strain rate-dependent mechanical behaviour of DP600 under in-plane biaxial loadings
- (2016) Wei Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Deformation behavior of commercially pure (CP) titanium under equi-biaxial tension
- (2016) Nedunchezhian Srinivasan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Experimental investigation of forming limit curves and deformation features in warm forming of an aluminium alloy
- (2016) Zhutao Shao et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Optimization of a Cruciform Specimen Geometry for the Identification of Constitutive Parameters Based Upon Full-Field Measurements
- (2016) M. B. R. Bertin et al. STRAIN
- Experimental prediction of sheet metal formability of AW-5754 for non-linear strain paths by using a cruciform specimen and a blank holder with adjustable draw beads on a sheet metal testing machine
- (2016) David Jocham et al. International Journal of Material Forming
- Earing in cup-drawing of anisotropic Al-6022-T4 sheets
- (2016) Haobin Tian et al. International Journal of Material Forming
- Evaluation of non-linear strain paths using Generalized Forming Limit Concept and a modification of the Time Dependent Evaluation Method
- (2016) Christian Gaber et al. International Journal of Material Forming
- The effect of the through-thickness normal stress on sheet formability
- (2016) Bolin Ma et al. Journal of Manufacturing Processes
- Prediction of forming limit curves for nonlinear loading paths using quadratic and non-quadratic yield criteria and variable imperfection factor
- (2016) Morteza Nurcheshmeh et al. MATERIALS & DESIGN
- Development of a new and simplified procedure for the experimental determination of forming limit curves
- (2015) C. Karadogan et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- A comparative study of three groups of ductile fracture loci in the 3D space
- (2015) Yuanli Bai et al. ENGINEERING FRACTURE MECHANICS
- Multiaxial Deformation Apparatus for Testing of Microtubes Under Combined Axial-Force and Internal-Pressure
- (2015) P. W. Ripley et al. EXPERIMENTAL MECHANICS
- Cruciform Specimen Design and Verification for Constitutive Identification of Anisotropic Sheets
- (2015) N. Deng et al. EXPERIMENTAL MECHANICS
- Potential of the Cross Biaxial Test for Anisotropy Characterization Based on Heterogeneous Strain Field
- (2015) S. Zhang et al. EXPERIMENTAL MECHANICS
- Forming limit prediction of anisotropic material subjected to normal and through thickness shear stresses using a modified M–K model
- (2015) Afshin Fatemi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental study on the mechanical properties of AZ31B-H24 magnesium alloy sheets under various loading conditions
- (2015) Yueqian Jia et al. INTERNATIONAL JOURNAL OF FRACTURE
- Identification of sheet metal hardening for large strains with an in-plane biaxial tensile test and a dedicated cross specimen
- (2015) Wei Liu et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Investigations of the effect of strain path changes on forming limit curves using an in-plane biaxial tensile test
- (2015) Lionel Leotoing et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Characterization of mechanical property of magnesium AZ31 alloy sheets for warm temperature forming
- (2015) Youngwoo Koh et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Investigation of the influence of the initial groove angle in the M–K model on limit strains and forming limit curves
- (2015) Jie Ding et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Mechanical characterization and constitutive parameter identification of anisotropic tubular materials for hydroforming applications
- (2015) Ali Khalfallah et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Modeling of forming limit for multilayer sheets based on strain-rate potentials
- (2015) Daeyong Kim et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Evaluation of biaxial flow stress based on elasto-viscoplastic self-consistent analysis of X-ray diffraction measurements
- (2015) Youngung Jeong et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Strain-path change induced transients in flow stress, work hardening and r-values in aluminum
- (2015) Tomáš Mánik et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Experimental and Visco-Plastic Self-Consistent evaluation of forming limit diagrams for anisotropic sheet metals: An efficient and robust implementation of the M-K model
- (2015) C. Schwindt et al. INTERNATIONAL JOURNAL OF PLASTICITY
- An evolving plane stress yield criterion based on crystal plasticity virtual experiments
- (2015) Jerzy Gawad et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Anisotropy of thin-walled tubes by a new method of combined tension and shear loading
- (2015) Christopher P. Dick et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Effect of compression–tension loading reversal on the strain to fracture of dual phase steel sheets
- (2015) Stéphane J. Marcadet et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Size effect affected formability of sheet metals in micro/meso scale plastic deformation: Experiment and modeling
- (2015) Z.T. Xu et al. INTERNATIONAL JOURNAL OF PLASTICITY
- In-plane biaxial compression and tension testing of thin sheet materials
- (2015) Benjamin Zillmann et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Optical Measurement of Forming Limit and Formability of Cu/Al Clad Metals
- (2015) Tao Sun et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Numerical determination of the forming limit curves of anisotropic sheet metals using GTN damage model
- (2015) Abdolvahed Kami et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Revisiting the formability limits by fracture in sheet metal forming
- (2015) J.M.C. Soeiro et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Accurate determination of flow curves using the bulge test with optical measuring systems
- (2015) J. Mulder et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Work-hardening and twinning behaviors in a commercially pure titanium sheet under various loading paths
- (2015) Takayuki Hama et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Deformation and strain hardening behavior of powder metallurgical TRIP steel under quasi-static biaxial-planar loading
- (2015) D. Kulawinski et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Modified MK model combined with ductile fracture criterion and its application in warm hydroforming
- (2015) Xi-ying YANG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Warm forming limits of rare earth-magnesium alloy ZEK100 sheet
- (2015) Mariusz Boba et al. International Journal of Material Forming
- Numerical and experimental analysis of wrinkling during the cup drawing of an AA5042 aluminium alloy
- (2015) D. M. Neto et al. International Journal of Material Forming
- Path-independent forming limit models for multi-stage forming processes
- (2015) Robert E. Dick et al. International Journal of Material Forming
- Parameter reduction for the Yld2004-18p yield criterion
- (2015) Ton van den Boogaard et al. International Journal of Material Forming
- Numerical and experimental investigations of hydro-mechanical deep drawing process of laminated aluminum/steel sheets
- (2015) S. Bagherzadeh et al. Journal of Manufacturing Processes
- Characterisation of kinematic hardening and yield surface evolution from uniaxial to biaxial tension with continuous strain path change
- (2014) Marion Merklein et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Testing and modelling of material behaviour and formability in sheet metal forming
- (2014) S. Bruschi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Identification of Post-Necking Hardening Phenomena in Ductile Sheet Metal
- (2014) S. Coppieters et al. EXPERIMENTAL MECHANICS
- Mechanical Testing of Thin Sheet Magnesium Alloys in Biaxial Tension and Uniaxial Compression
- (2014) D. Steglich et al. EXPERIMENTAL MECHANICS
- On the prediction of failure in metal sheets with special reference to strain path dependence
- (2014) Kjell Mattiasson et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Effect of through-thickness normal stress on forming limits under Yld2003 yield criterion and M-K model
- (2014) Feifei Zhang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Forming limit model evaluation for anisotropic sheet metals under through-thickness normal stress
- (2014) Feifei Zhang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Calibration of anisotropic yield criterion with conventional tests or biaxial test
- (2014) Shunying Zhang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- The effect of normal stress on the formability of sheet metals under non-proportional loading
- (2014) Morteza Nurcheshmeh et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Measuring forming limit strains with digital image correlation analysis
- (2014) Kaifeng Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A new method of determining forming limit diagram for sheet materials by gas blow forming
- (2014) G. Mitukiewicz et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Correlation between swift effects and tension–compression asymmetry in various polycrystalline materials
- (2014) Benoit Revil-Baudard et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- About the influence of hydrostatic pressure on the yielding and flow of metallic polycrystals
- (2014) Stefan C. Soare et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- New approaches to detect the onset of localised necking in sheets under through-thickness strain gradients
- (2014) A.J. Martínez-Donaire et al. MATERIALS & DESIGN
- Forming limit diagrams of twin-roll cast, rolled and heat-treated AZ31 as a function of temperature and loading rate
- (2014) F. Berge et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A methodology for determination of extended strain-based forming limit curve considering the effects of strain path and normal stress
- (2014) R Hashemi et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Anti-buckling Fixture for Large Deformation Tension-Compression Cyclic Loading of Thin Metal Sheets
- (2014) L. Dietrich et al. STRAIN
- Formability of AA3003 brazing sheet at elevated temperatures: limiting dome height experiments and determination of forming limit diagrams
- (2014) Reza Bagheriasl et al. International Journal of Material Forming
- Investigation on the effect of through thickness normal stress on forming limit at elevated temperature by using modified M-K model
- (2014) Lihui Lang et al. International Journal of Material Forming
- Forming Limit Curves for Complex Strain Paths
- (2013) J. Rojek et al. ARCHIVES OF METALLURGY AND MATERIALS
- Development of a new procedure for the experimental determination of the Forming Limit Curves
- (2013) D. Banabic et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Hot stamping of AA5083 aluminium alloy sheets
- (2013) Paolo F. Bariani et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Capability of the BBC2008 yield criterion in predicting the earing profile in cup deep drawing simulations
- (2013) Marko Vrh et al. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
- Influence of Specimen Geometry on the Estimation of the Planar Biaxial Mechanical Properties of Cruciform Specimens
- (2013) J.-J. Hu et al. EXPERIMENTAL MECHANICS
- The development of continuum damage mechanics-based theories for predicting forming limit diagrams for hot stamping applications
- (2013) J Lin et al. INTERNATIONAL JOURNAL OF DAMAGE MECHANICS
- Temperature and strain rate influence on AA5086 Forming Limit Curves: Experimental results and discussion on the validity of the M-K model
- (2013) Xingrong Chu et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Work-hardening behavior of polycrystalline aluminum alloy under multiaxial stress paths
- (2013) Kengo Yoshida et al. INTERNATIONAL JOURNAL OF PLASTICITY
- An extended GTN model for ductile fracture under high and low stress triaxiality
- (2013) L. Malcher et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Enhancements of homogenous anisotropic hardening model and application to mild and dual-phase steels
- (2013) F. Barlat et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality
- (2013) Yanshan Lou et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Mechanical response of AZ31B magnesium alloy: Experimental characterization and material modeling considering proportional loading at room temperature
- (2013) D. Ghaffari Tari et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Asymmetric yield function based on the stress invariants for pressure sensitive metals
- (2013) Jeong Whan Yoon et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Characterization of the post-necking strain hardening behavior using the virtual fields method
- (2013) J.-H. Kim et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- New analytical criterion for porous solids with Tresca matrix under axisymmetric loadings
- (2013) Oana Cazacu et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- An experimental and numerical investigation of different shear test configurations for sheet metal characterization
- (2013) Qing Yin et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Evaluation of Stress and Strain Measurement Accuracy in Hydraulic Bulge Test with the Aid of Finite-element Analysis
- (2013) Kengo Yoshida ISIJ INTERNATIONAL
- On the Combined Effect of Pressure and Third Invariant on Yielding of Porous Solids With von Mises Matrix
- (2013) Oana Cazacu et al. JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME
- Cruciform shape benefits for experimental and numerical evaluation of sheet metal formability
- (2013) Lionel Leotoing et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Development of a biaxial tensile machine for characterization of sheet metals
- (2013) M. Merklein et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Assessment of the effect of the through-thickness strain/stress gradient on the formability of stretch-bend metal sheets
- (2013) Domingo Morales-Palma et al. MATERIALS & DESIGN
- Analysis of the extended stress-based forming limit curve considering the effects of strain path and through-thickness normal stress
- (2013) Ramin Hashemi et al. MATERIALS & DESIGN
- Experimental and numerical investigation of Mg alloy sheet formability
- (2013) M. Nebebe Mekonen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of stress triaxiality on porosity evolution in notched bars: Quantitative agreement between a recent dilatational model and X-ray tomography data
- (2013) Benoit Revil-Baudard et al. MECHANICS RESEARCH COMMUNICATIONS
- On the Swift effect and twinning in a rolled magnesium alloy under free-end torsion
- (2013) X.Q. Guo et al. SCRIPTA MATERIALIA
- Failure prediction for nonlinear strain paths in sheet metal forming
- (2012) Wolfram Volk et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Anisotropic Hardening of Sheet Metals at Elevated Temperature: Tension-Compressions Test Development and Validation
- (2012) M. G. Lee et al. EXPERIMENTAL MECHANICS
- Influences of material properties of components on formability of two-layer metallic sheets
- (2012) A. Jalali Aghchai et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of strain rate sensitivity on FLDs—An instability approach
- (2012) Ming-Yao Li et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Multiaxial tube expansion test method for measurement of sheet metal deformation behavior under biaxial tension for a large strain range
- (2012) Toshihiko Kuwabara et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Advanced Issues in springback
- (2012) Robert H. Wagoner et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Extension of homogeneous anisotropic hardening model to cross-loading with latent effects
- (2012) Frédéric Barlat et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Biaxial deformation behaviour of AZ31 magnesium alloy: Crystal-plasticity-based prediction and experimental validation
- (2012) D. Steglich et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Comparison of bifurcation and imperfection analyses of localized necking in rate-independent polycrystalline sheets
- (2012) Kengo Yoshida et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Characterization of anisotropy of sheet metals employing inhomogeneous strain fields for Yld2000-2D yield function
- (2012) A. Güner et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Material modeling of 6000 series aluminum alloy sheets with different density cube textures and effect on the accuracy of finite element simulation
- (2012) Daisaku Yanaga et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Determination of anisotropy and material hardening for aluminum sheet metal
- (2012) Nicolas Tardif et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Path independent forming limits in strain and stress spaces
- (2012) Thomas B. Stoughton et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- New ductile fracture criterion for prediction of fracture forming limit diagrams of sheet metals
- (2012) Yanshan Lou et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Overview on constitutive modeling for hydroforming with the existence of through-thickness normal stress
- (2012) Feifei Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Forming characteristic of sheet hydroforming under the influence of through-thickness normal stress
- (2012) Baosheng Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Experimental and numerical study of the role of crystallographic texture on the formability of an electro-galvanized steel sheet
- (2012) J.W. Signorelli et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Reduction of a pre-formed radius in aluminium sheet using electromagnetic and conventional forming
- (2012) J. Imbert et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A new method for predicting Forming Limit Curves from mechanical properties
- (2012) Michael Abspoel et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Numerical verification of a biaxial tensile test method using a cruciform specimen
- (2012) Yasuhiro Hanabusa et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Forming limit diagram prediction of AA5052/polyethylene/AA5052 sandwich sheets
- (2012) Jianguang Liu et al. MATERIALS & DESIGN
- Work-hardening behaviors of magnesium alloy sheet during in-plane cyclic loading
- (2012) Takayuki Hama et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Material modeling of AZ31 Mg sheet considering variation of r-values and asymmetry of the yield locus
- (2012) Mohammad Omar Andar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Ductile damage in aluminium alloy thin sheets: Correlation between micro-tomography observations and mechanical modeling
- (2012) S. Thuillier et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Warm forming behavior of high strength aluminum alloy AA7075
- (2012) Hui WANG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Design optimisation of biaxial tensile test specimen using finite element analysis
- (2012) P. Tiernan et al. International Journal of Material Forming
- The strain gradient approach to predict necking in tube hydroforming
- (2012) Ramin Hashemi et al. Journal of Manufacturing Processes
- Identification of plastic constitutive parameters at large deformations from three dimensional displacement fields
- (2011) Marco Rossi et al. COMPUTATIONAL MECHANICS
- Damage quantification in aluminium alloys using in situ tensile tests in X-ray tomography
- (2011) Eric Maire et al. ENGINEERING FRACTURE MECHANICS
- Optimized butterfly specimen for the fracture testing of sheet materials under combined normal and shear loading
- (2011) Matthieu Dunand et al. ENGINEERING FRACTURE MECHANICS
- Novel Technique for Static and Dynamic Shear Testing of Ti6Al4V Sheet
- (2011) J. Peirs et al. EXPERIMENTAL MECHANICS
- Investigation of deformation and failure features in hot stamping of AA6082: Experimentation and modelling
- (2011) Mohamed S. Mohamed et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Determination of forming limit diagrams of sheet materials with a hybrid experimental–numerical approach
- (2011) Q. Situ et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- An extended Marciniak–Kuczynski model for anisotropic sheet subjected to monotonic strain paths with through-thickness shear
- (2011) Philip Eyckens et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A novel yield locus description by combining the Taylor and the relaxed Taylor theory for sheet steels
- (2011) Yuguo An et al. INTERNATIONAL JOURNAL OF PLASTICITY
- An alternative to kinematic hardening in classical plasticity
- (2011) Frédéric Barlat et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Experimental characterization and elasto-plastic modeling of the quasi-static mechanical response of TA-6V at room temperature
- (2011) G. Gilles et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Effect of Pre-strain on Anisotropic Hardening and Springback Behavior of an Ultra Low Carbon Automotive Steel
- (2011) Rahul K. Verma et al. ISIJ INTERNATIONAL
- Influence of initial texture on formability of AZ31B magnesium alloy sheets at different temperatures
- (2011) Hua Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Formability of lightweight alloys by hot incremental sheet forming
- (2011) G. Ambrogio et al. MATERIALS & DESIGN
- Hardening in relation with microstructure evolution of high purity α-titanium deformed under monotonic and cyclic simple shear loadings at room temperature
- (2011) S. Bouvier et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Recent developments in plastic forming technology of titanium alloys
- (2011) He Yang et al. Science China-Technological Sciences
- Forming limit of textured AZ31B magnesium alloy sheet at different temperatures
- (2011) Guang-sheng HUANG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Phenomenological and crystal plasticity approaches to describe the mechanical behaviour of Ti6Al4V titanium alloy
- (2011) Walid Hammami et al. International Journal of Material Forming
- Measurement and analysis of differential work hardening behavior of pure titanium sheet using spline function
- (2011) Mantaro Ishiki et al. International Journal of Material Forming
- Modified maximum force criterion, a model for the theoretical prediction of forming limit curves
- (2011) P. Hora et al. International Journal of Material Forming
- Modelling of forming limit diagram of perforated commercial pure aluminium sheets using artificial neural network
- (2010) K. Elangovan et al. COMPUTATIONAL MATERIALS SCIENCE
- Forming limit diagrams with the existence of through-thickness normal stress
- (2010) Ahmad Assempour et al. COMPUTATIONAL MATERIALS SCIENCE
- Investigation of the dislocation slip assumption on formability of BCC sheet metals
- (2010) M.J. Serenelli et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- A new approach for failure criterion for sheet metals
- (2010) Thomas B. Stoughton et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Ductile fracture: Experiments and computations
- (2010) H. Li et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Experimental evaluation and constitutive modeling of non-proportional deformation for asymmetric steels
- (2010) Rahul K. Verma et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Complex unloading behavior: Nature of the deformation and its consistent constitutive representation
- (2010) Li Sun et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Prediction of plane strain fracture of AHSS sheets with post-initiation softening
- (2010) Yaning Li et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Extension of the virtual fields method to elasto-plastic material identification with cyclic loads and kinematic hardening
- (2010) F. Pierron et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Numerical failure analysis of a stretch-bending test on dual-phase steel sheets using a phenomenological fracture model
- (2010) Meng Luo et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Study of limit strains for FCC and BCC sheet metal using polycrystal plasticity
- (2010) M.J. Serenelli et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Analytical yield criterion for an anisotropic material containing spherical voids and exhibiting tension–compression asymmetry
- (2010) Joel B. Stewart et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Elastic–Plastic and Inelastic Characteristics of High Strength Steel Sheets under Biaxial Loading and Unloading
- (2010) Mohammad Omar Andar et al. ISIJ INTERNATIONAL
- Experimental and Numerical Determination of Limiting Drawing Ratio of Al3105-Polypropylene-Al3105 Sandwich Sheets
- (2010) M. H. Parsa et al. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
- Accurate stress computation in plane strain tensile tests for sheet metal using experimental data
- (2010) Paulo Flores et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A review on hot stamping
- (2010) H. Karbasian et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Prediction of shear-induced fracture in sheet metal forming
- (2010) Yaning Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of anisotropic yield functions on the accuracy of hole expansion simulations
- (2010) Toshihiko Kuwabara et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Identification of the post-necking hardening behaviour of sheet metal by comparison of the internal and external work in the necking zone
- (2010) S. Coppieters et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Electromagnetic forming—A review
- (2010) V. Psyk et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fracture in bending – The straining limits of monolithic sheets and machined tailor-made blanks
- (2010) Amir Abbas Zadpoor et al. MATERIALS & DESIGN
- A New Shear Test for Sheet Metal Characterization
- (2010) A. Brosius et al. STEEL RESEARCH INTERNATIONAL
- Effect of Anisotropic Yield Functions on the Accuracy of Hole Expansion Simulations for 590 MPa Grade Steel Sheet
- (2010) Kazuma Hashimoto et al. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN
- A new formulation of the modified maximum force criterion (MMFC)
- (2010) Liana Paraianu et al. International Journal of Material Forming
- Development of an Anisotropic Failure Criterion for Characterising the Influence of Curvature on Forming Limits of Aluminium Sheet Metal Alloys
- (2010) M. Liewald et al. International Journal of Material Forming
- Modelling the correlation between the geometrical features and the forming limit strains of perforated Al 8011 sheets using artificial neural network
- (2010) K. Elangovan et al. International Journal of Material Forming
- New algorithm for a robust user-independent evaluation of beginning instability for the experimental FLC determination
- (2010) W. Volk et al. International Journal of Material Forming
- Advances in anisotropy and formability
- (2010) Dorel Banabic et al. International Journal of Material Forming
- An experimental and numerical study of the effects of length scale and strain state on the necking and fracture behaviours in sheet metals
- (2009) P. Hogström et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Identification of sheet metal plastic anisotropy using heterogeneous biaxial tensile tests
- (2009) M. Teaca et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Marciniak–Kuczynski type modelling of the effect of Through-Thickness Shear on the forming limits of sheet metal
- (2009) Philip Eyckens et al. INTERNATIONAL JOURNAL OF PLASTICITY
- An efficient constitutive model for room-temperature, low-rate plasticity of annealed Mg AZ31B sheet
- (2009) M. Li et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Anisotropic response of high-purity α-titanium: Experimental characterization and constitutive modeling
- (2009) Michael E. Nixon et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Evaluation of associated and non-associated quadratic plasticity models for advanced high strength steel sheets under multi-axial loading
- (2009) Dirk Mohr et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Blow forming of AZ31 magnesium alloy at elevated temperatures
- (2009) Donato Sorgente et al. International Journal of Material Forming
- Bending effect in the failure of stretch-bend metal sheets
- (2009) D. Morales et al. International Journal of Material Forming
- Forming severity concept for predicting sheet necking under complex loading histories
- (2008) Yuanli Bai et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- A review of some plasticity and viscoplasticity constitutive theories
- (2008) J.L. Chaboche INTERNATIONAL JOURNAL OF PLASTICITY
- Generalised forming limit diagrams showing increased forming limits with non-planar stress states
- (2008) Julian M. Allwood et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Plastic Behavior of Metals at Large Strains: Experimental Studies Involving Simple Shear
- (2008) E. F. Rauch JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
- Analytic plastic potential for porous aggregates with matrix exhibiting tension–compression asymmetry
- (2008) Oana Cazacu et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- A new model of metal plasticity and fracture with pressure and Lode dependence
- (2007) Yuanli Bai et al. INTERNATIONAL JOURNAL OF PLASTICITY
Become a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get StartedAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started