Challenges and Opportunities in the Selective Laser Melting of Biodegradable Metals for Load-Bearing Bone Scaffold Applications
出版年份 2020 全文链接
标题
Challenges and Opportunities in the Selective Laser Melting of Biodegradable Metals for Load-Bearing Bone Scaffold Applications
作者
关键词
-
出版物
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
Volume -, Issue -, Pages -
出版商
Springer Science and Business Media LLC
发表日期
2020-05-09
DOI
10.1007/s11661-020-05796-z
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- The Influence of Alloying and Fabrication Techniques on the Mechanical Properties, Biodegradability and Biocompatibility of Zinc: A Comprehensive Review
- (2019) J. Venezuela et al. Acta Biomaterialia
- Exploring the Role of Manganese on the Microstructure, Mechanical Properties, Biodegradability, and Biocompatibility of Porous Iron-Based Scaffolds
- (2019) Matthew S. Dargusch et al. ACS Biomaterials-Science & Engineering
- Thermal Plasma Spraying as a New Approach for Preparation of Zinc Biodegradable Scaffolds: A Complex Material Characterization
- (2019) Jaroslav Čapek et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
- Fundamental Theory of Biodegradable Metals-Definition, Criteria, and Design
- (2019) Yang Liu et al. ADVANCED FUNCTIONAL MATERIALS
- The addition of silver affects the deformation mechanism of a twinning-induced plasticity steel: Potential for thinner degradable stents
- (2019) Sergio Loffredo et al. Acta Biomaterialia
- Influence of design and postprocessing parameters on the degradation behavior and mechanical properties of additively manufactured magnesium scaffolds
- (2019) Alexander Kopp et al. Acta Biomaterialia
- Additive manufacturing of biodegradable metals: Current research status and future perspectives
- (2019) Yu Qin et al. Acta Biomaterialia
- Corrosion fatigue behavior of additively manufactured biodegradable porous iron
- (2019) Y. Li et al. CORROSION SCIENCE
- Laser additive manufacturing of Zn-2Al part for bone repair: Formability, microstructure and properties
- (2019) Cijun Shuai et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Selective laser melting of Mg-Zn binary alloys: Effects of Zn content on densification behavior, microstructure, and mechanical property
- (2019) Kaiwen Wei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The influence of laser processing parameters on the densification and surface morphology of pure Fe and Fe-35Mn scaffolds produced by selective laser melting
- (2019) D. Carluccio et al. Journal of Manufacturing Processes
- Additively manufactured functionally graded biodegradable porous iron
- (2019) Y. Li et al. Acta Biomaterialia
- Mechanical properties and biodegradation of porous Zn-1Al alloy scaffolds
- (2019) Lichen Zhao et al. MATERIALS LETTERS
- Evaluation of the mechanical compatibility of additively manufactured porous Ti–25Ta alloy for load-bearing implant applications
- (2019) Nicolas Soro et al. Journal of the Mechanical Behavior of Biomedical Materials
- Biodegradation-affected fatigue behavior of additively manufactured porous magnesium
- (2019) Y. Li et al. Additive Manufacturing
- Additive manufacturing of biodegradable Zn-xWE43 porous scaffolds: Formation quality, microstructure and mechanical properties
- (2019) Yu Qin et al. MATERIALS & DESIGN
- Novel microstructural features of selective laser melted lattice struts fabricated with single point exposure scanning
- (2019) E. Onal et al. Additive Manufacturing
- Additively manufactured iron-manganese for biodegradable porous load-bearing bone scaffold applications
- (2019) Danilo Carluccio et al. Acta Biomaterialia
- Additively manufactured biodegradable porous zinc
- (2019) Y. Li et al. Acta Biomaterialia
- Selective laser melting Fe and Fe-35Mn for biodegradable implants
- (2019) Danilo Carluccio et al. INTERNATIONAL JOURNAL OF MODERN PHYSICS B
- In vitro and in vivo studies on zinc-hydroxyapatite composites as novel biodegradable metal matrix composite for orthopedic applications
- (2018) Hongtao Yang et al. Acta Biomaterialia
- Additively manufactured biodegradable porous iron
- (2018) Y. Li et al. Acta Biomaterialia
- Zinc-based alloys for degradable vascular stent applications
- (2018) Ehsan Mostaed et al. Acta Biomaterialia
- Additively manufactured biodegradable porous magnesium
- (2018) Y. Li et al. Acta Biomaterialia
- Segmentation-free geometrical verification of additively manufactured components by x-ray computed tomography
- (2018) Giovanni Moroni et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Characterization of nanostructured biodegradable Zn-Mn alloy synthesized by mechanical alloying
- (2018) P. Sotoudeh Bagha et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Comparative study between CW and PW emissions in selective laser melting
- (2018) Leonardo Caprio et al. JOURNAL OF LASER APPLICATIONS
- Densification behavior of pure Zn metal parts produced by selective laser melting for manufacturing biodegradable implants
- (2018) Peng Wen et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Indirectly extruded biodegradable Zn-0.05wt%Mg alloy with improved strength and ductility: In vitro and in vivo studies
- (2018) Chi Xiao et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Prototyping of biodegradable flat stents in pure zinc by laser microcutting and chemical etching
- (2018) Guendalina Catalano et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- A combined strategy to enhance the properties of Zn by laser rapid solidification and laser alloying
- (2018) Youwen Yang et al. Journal of the Mechanical Behavior of Biomedical Materials
- Synthesis of biodegradable Zn-based scaffolds using NaCl templates: Relationship between porosity, compressive properties and degradation behavior
- (2018) Yi Hou et al. MATERIALS CHARACTERIZATION
- Fabrication and properties of biodegradable ZnO nano-rods/porous Zn scaffolds
- (2018) Lichen Zhao et al. MATERIALS CHARACTERIZATION
- Preparation and characterization of porous zinc prepared by spark plasma sintering as a material for biodegradable scaffolds
- (2018) Jaroslav Čapek et al. MATERIALS CHEMISTRY AND PHYSICS
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- In situ monitoring of selective laser melting of zinc powder via infrared imaging of the process plume
- (2018) M. Grasso et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- 3D Printed Fe Scaffolds with HA Nanocoating for Bone Regeneration
- (2018) Chen Yang et al. ACS Biomaterials-Science & Engineering
- Laser additive manufacturing of Zn metal parts for biodegradable applications: Processing, formation quality and mechanical properties
- (2018) Peng Wen et al. MATERIALS & DESIGN
- A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
- (2018) Haniyeh Fayazfar et al. MATERIALS & DESIGN
- 3D Printed Fe Scaffolds with HA Nanocoating for Bone Regeneration
- (2018) Chen Yang et al. ACS Biomaterials Science & Engineering
- Laser additive manufacturing of Zn porous scaffolds: shielding gas flow, surface quality and densification
- (2018) Peng Wen et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Fabrication and properties of porous Zn-Ag alloy scaffolds as biodegradable materials
- (2018) Yu Xie et al. MATERIALS CHEMISTRY AND PHYSICS
- Nitroimidazole derivative incorporated liposomes for hypoxia-triggered drug delivery and enhanced therapeutic efficacy in patient-derived tumor xenografts
- (2018) Yi Li et al. Acta Biomaterialia
- Recent advancements in Fe-based biodegradable materials for bone repair
- (2018) R. Gorejová et al. JOURNAL OF MATERIALS SCIENCE
- Additive manufactured WE43 magnesium: A comparative study of the microstructure and mechanical properties with those of powder extruded and as-cast WE43
- (2018) Naemi A. Zumdick et al. MATERIALS CHARACTERIZATION
- Influence of pulsed and continuous wave emission on melting efficiency in selective laser melting
- (2018) Leonardo Caprio et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Complementary use of pulsed and continuous wave emission modes to stabilize melt pool geometry in laser powder bed fusion
- (2018) Ali Gökhan Demir et al. OPTICS AND LASER TECHNOLOGY
- From pulsed to continuous wave emission in SLM with contemporary fiber laser sources: effect of temporal and spatial pulse overlap in part quality
- (2017) Ali Gökhan Demir et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Laser rapid solidification improves corrosion behavior of Mg-Zn-Zr alloy
- (2017) Cijun Shuai et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting
- (2017) M. Wiesener et al. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
- In vitro corrosion properties and cytocompatibility of Fe-Ga alloys as potential biodegradable metallic materials
- (2017) Henan Wang et al. Materials Science & Engineering C-Materials for Biological Applications
- Zn-Li alloy after extrusion and drawing: Structural, mechanical characterization, and biodegradation in abdominal aorta of rat
- (2017) Shan Zhao et al. Materials Science & Engineering C-Materials for Biological Applications
- Fabrication, mechanical properties and in vitro degradation behavior of newly developed Zn Ag alloys for degradable implant applications
- (2017) M. Sikora-Jasinska et al. Materials Science & Engineering C-Materials for Biological Applications
- Scaffolds for Bone Tissue Engineering: State of the art and new perspectives
- (2017) Livia Roseti et al. Materials Science & Engineering C-Materials for Biological Applications
- Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: A state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility
- (2017) X.P. Tan et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of laser processing parameters on porosity, microstructure and mechanical properties of porous Mg-Ca alloys produced by laser additive manufacturing
- (2017) Chang Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Abnormal effect of Mn addition on the mechanical properties of as-extruded Zn alloys
- (2017) Shineng Sun et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Process defects andin situmonitoring methods in metal powder bed fusion: a review
- (2017) Marco Grasso et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Structural Characteristics and In Vitro Biodegradation of a Novel Zn-Li Alloy Prepared by Induction Melting and Hot Rolling
- (2017) Shan Zhao et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Processability of pure Zn and pure Fe by SLM for biodegradable metallic implant manufacturing
- (2017) Marco Montani et al. RAPID PROTOTYPING JOURNAL
- Significantly Enhancing the Ignition/Compression/Damping Response of Monolithic Magnesium by Addition of Sm2O3 Nanoparticles
- (2017) Milli Suchita Kujur et al. Metals
- Investigation on Mechanical Behavior of Biodegradable Iron Foams under Different Compression Test Conditions
- (2017) Reza Alavi et al. Metals
- Design and characterizations of novel biodegradable Zn-Cu-Mg alloys for potential biodegradable implants
- (2017) Zibo Tang et al. MATERIALS & DESIGN
- Additive manufacturing of cardiovascular CoCr stents by selective laser melting
- (2017) Ali Gökhan Demir et al. MATERIALS & DESIGN
- 3D printed Ti6Al4V implant surface promotes bone maturation and retains a higher density of less aged osteocytes at the bone-implant interface
- (2016) Furqan A. Shah et al. Acta Biomaterialia
- Long-term osseointegration of 3D printed CoCr constructs with an interconnected open-pore architecture prepared by electron beam melting
- (2016) Furqan A. Shah et al. Acta Biomaterialia
- Binder-jetting 3D printing and alloy development of new biodegradable Fe-Mn-Ca/Mg alloys
- (2016) Daeho Hong et al. Acta Biomaterialia
- Vascularized bone grafting fixed by biodegradable magnesium screw for treating osteonecrosis of the femoral head
- (2016) Dewei Zhao et al. BIOMATERIALS
- Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
- (2016) Xiaojian Wang et al. BIOMATERIALS
- Experimental Research on a Novel Iodine-125 Seed Strand Connected Using Magnesium Alloy AZ31
- (2016) Tao Zhang et al. Brachytherapy
- The microstructure, mechanical properties and degradation behavior of laser-melted Mg Sn alloys
- (2016) Yuanzhuo Zhou et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Defining the Lower Limit of a “Critical Bone Defect” in Open Diaphyseal Tibial Fractures
- (2016) Nikkole M. Haines et al. JOURNAL OF ORTHOPAEDIC TRAUMA
- Microstructure, mechanical and corrosion properties of biodegradable powder metallurgical Fe-2 wt% X (X = Pd, Ag and C) alloys
- (2016) Jaroslav Čapek et al. MATERIALS CHEMISTRY AND PHYSICS
- Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment
- (2016) Naoya Taniguchi et al. Materials Science & Engineering C-Materials for Biological Applications
- Research on a Zn-Cu alloy as a biodegradable material for potential vascular stents application
- (2016) Jialin Niu et al. Materials Science & Engineering C-Materials for Biological Applications
- Structure, mechanical characteristics and in vitro degradation, cytotoxicity, genotoxicity and mutagenicity of novel biodegradable Zn–Mg alloys
- (2016) J. Kubásek et al. Materials Science & Engineering C-Materials for Biological Applications
- Microstructural, mechanical, corrosion and cytotoxicity characterization of the hot forged FeMn30(wt.%) alloy
- (2016) Jaroslav Čapek et al. Materials Science & Engineering C-Materials for Biological Applications
- X-ray computed tomography for additive manufacturing: a review
- (2016) A Thompson et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Long-term clinical study and multiscale analysis of in vivo biodegradation mechanism of Mg alloy
- (2016) Jee-Wook Lee et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Effect of preheat and layer thickness on selective laser melting (SLM) of magnesium
- (2016) Monica Mahesh Savalani et al. RAPID PROTOTYPING JOURNAL
- Biodegradable Metals for Cardiovascular Stents: from Clinical Concerns to Recent Zn-Alloys
- (2016) Patrick K. Bowen et al. Advanced Healthcare Materials
- Influence of Alloying Treatment and Rapid Solidification on the Degradation Behavior and Mechanical Properties of Mg
- (2016) Jian Chen et al. Metals
- Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles
- (2016) Michael Cloots et al. MATERIALS & DESIGN
- Powder bed binder jet printed alloy 625: Densification, microstructure and mechanical properties
- (2016) Amir Mostafaei et al. MATERIALS & DESIGN
- Mechanical properties and in vitro biodegradation of newly developed porous Zn scaffolds for biomedical applications
- (2016) Lichen Zhao et al. MATERIALS & DESIGN
- Reprint of: The history of biodegradable magnesium implants: A review
- (2015) Frank Witte Acta Biomaterialia
- Numerical investigation and an effective modelling on the Selective Laser Melting (SLM) process with aluminium alloy 6061
- (2015) Loong-Ee Loh et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- SLM Produced Porous Titanium Implant Improvements for Enhanced Vascularization and Osteoblast Seeding
- (2015) Julia Matena et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Comparison of Selective Laser Melted Titanium and Magnesium Implants Coated with PCL
- (2015) Julia Matena et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- In vitro biodegradation behavior, mechanical properties, and cytotoxicity of biodegradable Zn-Mg alloy
- (2015) Haibo Gong et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Fe-Au and Fe-Ag composites as candidates for biodegradable stent materials
- (2015) Tao Huang et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Degradable porous Fe-35wt.%Mn produced via powder sintering from NH 4 HCO 3 porogen
- (2015) Qian Zhang et al. MATERIALS CHEMISTRY AND PHYSICS
- Influence of element vaporization on formability, composition, microstructure, and mechanical performance of the selective laser melted Mg–Zn–Zr components
- (2015) Kaiwen Wei et al. MATERIALS LETTERS
- Comparison of wear properties of commercially pure titanium prepared by selective laser melting and casting processes
- (2015) H. Attar et al. MATERIALS LETTERS
- Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications
- (2015) Thomas Niendorf et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy
- (2015) Yanjin Lu et al. OPTICS AND LASER TECHNOLOGY
- Bacterial inhibition potential of 3D rapid-prototyped magnesium-based porous composite scaffolds–an in vitro efficacy study
- (2015) Rui Ma et al. Scientific Reports
- Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr
- (2015) H. F. Li et al. Scientific Reports
- Bone tissue regeneration: the role of scaffold geometry
- (2015) Amir A. Zadpoor Biomaterials Science
- Design and characterizations of novel biodegradable ternary Zn-based alloys with IIA nutrient alloying elements Mg, Ca and Sr
- (2015) Huafang Li et al. MATERIALS & DESIGN
- Influence of thermal treatment on microstructure, mechanical and degradation properties of Zn–3Mg alloy as potential biodegradable implant material
- (2015) M.S. Dambatta et al. MATERIALS & DESIGN
- Controlling the degradation kinetics of porous iron by poly(lactic-co-glycolic acid) infiltration for use as temporary medical implants
- (2015) Abdul Hakim Md Yusop et al. Scientific Reports
- Recent advances on the development of magnesium alloys for biodegradable implants
- (2014) Yongjun Chen et al. Acta Biomaterialia
- Biodegradable Fe-based alloys for use in osteosynthesis: Outcome of an in vivo study after 52weeks
- (2014) Tanja Kraus et al. Acta Biomaterialia
- Comparative study of CW, nanosecond- and femtosecond-pulsed laser microcutting of AZ31 magnesium alloy stents
- (2014) Ali Gökhan Demir et al. Biointerphases
- Mesoporous bioactive glass doped-poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) composite scaffolds with 3-dimensionally hierarchical pore networks for bone regeneration
- (2014) Shengbing Yang et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Energy consumption model of Binder-jetting additive manufacturing processes
- (2014) Xin Xu et al. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH
- Effects of Mg on microstructure and corrosion properties of Zn–Mg alloy
- (2014) Caizhen Yao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Tribological and corrosion properties of Al–12Si produced by selective laser melting
- (2014) K.G. Prashanth et al. JOURNAL OF MATERIALS RESEARCH
- Scaffold Design for Bone Regeneration
- (2014) Liliana Polo-Corrales et al. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY
- Biodegradable metals
- (2014) Y.F. Zheng et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Effect of energy input on formability, microstructure and mechanical properties of selective laser melted AZ91D magnesium alloy
- (2014) Kaiwen Wei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Progress of biodegradable metals
- (2014) Huafang Li et al. Progress in Natural Science-Materials International
- Effects of alloying elements on the corrosion behavior and biocompatibility of biodegradable magnesium alloys: a review
- (2014) Yunfei Ding et al. Journal of Materials Chemistry B
- A Novel magnesium composed PLGA/TCP porous scaffold fabricated by 3D printing for bone regeneration
- (2014) Yuxiao Lai et al. Journal of Orthopaedic Translation
- Novel processing of iron–manganese alloy-based biomaterials by inkjet 3-D printing
- (2013) Da-Tren Chou et al. Acta Biomaterialia
- Zinc Exhibits Ideal Physiological Corrosion Behavior for Bioabsorbable Stents
- (2013) Patrick K. Bowen et al. ADVANCED MATERIALS
- Biodegradable magnesium-based screw clinically equivalent to titanium screw in hallux valgus surgery: short term results of the first prospective, randomized, controlled clinical pilot study
- (2013) Henning Windhagen et al. Biomedical Engineering Online
- Synthesis, microstructure and mechanical properties of porous MgZn scaffolds
- (2013) Z.S. Seyedraoufi et al. Journal of the Mechanical Behavior of Biomedical Materials
- Safety and performance of the drug-eluting absorbable metal scaffold (DREAMS) in patients with de-novo coronary lesions: 12 month results of the prospective, multicentre, first-in-man BIOSOLVE-I trial
- (2013) Michael Haude et al. LANCET
- Vacuum heat treatment of iron parts produced by selective laser melting: Microstructure, residual stress and tensile behavior
- (2013) Bo Song et al. MATERIALS & DESIGN
- In vitro degradation and biocompatibility of Fe–Pd and Fe–Pt composites fabricated by spark plasma sintering
- (2013) T. Huang et al. Materials Science & Engineering C-Materials for Biological Applications
- Bone tissue engineering using 3D printing
- (2013) Susmita Bose et al. Materials Today
- Microstructure and tensile properties of iron parts fabricated by selective laser melting
- (2013) Bo Song et al. OPTICS AND LASER TECHNOLOGY
- Mg–Zr–Sr alloys as biodegradable implant materials
- (2012) Yuncang Li et al. Acta Biomaterialia
- The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds
- (2012) S. Van Bael et al. Acta Biomaterialia
- Fast escape of hydrogen from gas cavities around corroding magnesium implants
- (2012) Julia Kuhlmann et al. Acta Biomaterialia
- Recrystallization behavior, microstructure evolution and mechanical properties of biodegradable Fe–Mn–C(–Pd) TWIP alloys
- (2012) Michael Schinhammer et al. ACTA MATERIALIA
- Electrochemical characteristics of magnesium alloy AZ31 in Hank’s solution
- (2012) L Bukovinová et al. CORROSION ENGINEERING SCIENCE AND TECHNOLOGY
- Corrosion behaviour of a nominally high purity Mg ingot produced by permanent mould direct chill casting
- (2012) Zhixia Qiao et al. CORROSION SCIENCE
- Image data based reconstruction of the midface using a patient-specific implant in combination with a vascularized osteomyocutaneous scapular flap
- (2012) Christian Mertens et al. JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY
- Selective laser melting-produced porous titanium scaffolds regenerate bone in critical size cortical bone defects
- (2012) Johan Van der Stok et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- Microstructure, mechanical properties, biocorrosion behavior, and cytotoxicity of as-extruded Mg–Nd–Zn–Zr alloy with different extrusion ratios
- (2012) Xiaobo Zhang et al. Journal of the Mechanical Behavior of Biomedical Materials
- Effects of Sr and Sn on microstructure and corrosion resistance of Mg–Zr–Ca magnesium alloy for biomedical applications
- (2012) Wenjin Zhang et al. MATERIALS & DESIGN
- A novel biodegradable Mg–Nd–Zn–Zr alloy with uniform corrosion behavior in artificial plasma
- (2012) Lin Mao et al. MATERIALS LETTERS
- Biocorrosion behavior and cytotoxicity of a Mg–Gd–Zn–Zr alloy with long period stacking ordered structure
- (2012) Xiaobo Zhang et al. MATERIALS LETTERS
- Degradation performance of biodegradable FeMnC(Pd) alloys
- (2012) Michael Schinhammer et al. Materials Science & Engineering C-Materials for Biological Applications
- In vitro degradation behavior and biocompatibility of Mg–Nd–Zn–Zr alloy by hydrofluoric acid treatment
- (2012) Lin Mao et al. Materials Science & Engineering C-Materials for Biological Applications
- Microstructure and high mechanical properties of Mg–9RY–4Zn (RY: Y-rich misch metal) alloy with long period stacking ordered phase
- (2012) Zhe Leng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Comparison of biodegradable behaviors of AZ31 and Mg–Nd–Zn–Zr alloys in Hank's physiological solution
- (2012) Yang Zong et al. Materials Science and Engineering B-Advanced Functional Solid-State Materials
- Microstructures and mechanical properties of as cast Mg–Zr–Ca alloys for biomedical applications
- (2012) Y-L Zhou et al. MATERIALS TECHNOLOGY
- Finite Element Analysis of Schwarz P Surface Pore Geometries for Tissue-Engineered Scaffolds
- (2012) Jaemin Shin et al. MATHEMATICAL PROBLEMS IN ENGINEERING
- Recent advances in bone tissue engineering scaffolds
- (2012) Susmita Bose et al. TRENDS IN BIOTECHNOLOGY
- The Effect of Structural Design on Mechanical Properties and Cellular Response of Additive Manufactured Titanium Scaffolds
- (2012) Jan Wieding et al. Materials
- Biodegradable Orthopedic Magnesium-Calcium (MgCa) Alloys, Processing, and Corrosion Performance
- (2012) Meisam Salahshoor et al. Materials
- Geometry as a Factor for Tissue Growth: Towards Shape Optimization of Tissue Engineering Scaffolds
- (2012) Cécile M. Bidan et al. Advanced Healthcare Materials
- Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation
- (2011) D. Vojtěch et al. Acta Biomaterialia
- Magnesium alloys for temporary implants in osteosynthesis: In vivo studies of their degradation and interaction with bone
- (2011) Tanja Kraus et al. Acta Biomaterialia
- Microstructure and mechanical properties of selective laser melted magnesium
- (2011) C.C. Ng et al. APPLIED SURFACE SCIENCE
- On the In Vivo Degradation Performance of Stranded 125I Seeds Connected With AZ31B Magnesium Alloy
- (2011) Fu-jun Zhang et al. Brachytherapy
- Corrosion of high purity Mg, Mg2Zn0.2Mn, ZE41 and AZ91 in Hank’s solution at 37°C
- (2011) Nor Ishida Zainal Abidin et al. CORROSION SCIENCE
- High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships
- (2011) O. Bouaziz et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Effects of extrusion and heat treatment on the mechanical properties and biocorrosion behaviors of a Mg–Nd–Zn–Zr alloy
- (2011) Xiaobo Zhang et al. Journal of the Mechanical Behavior of Biomedical Materials
- Investigation of the mechanical and degradation properties of Mg–Sr and Mg–Zn–Sr alloys for use as potential biodegradable implant materials
- (2011) Harpreet S. Brar et al. Journal of the Mechanical Behavior of Biomedical Materials
- Effects of processing parameters on properties of selective laser melting Mg–9%Al powder mixture
- (2011) Baicheng Zhang et al. MATERIALS & DESIGN
- Preparation and characterization of a new biomedical Mg–Zn–Ca alloy
- (2011) Yu Sun et al. MATERIALS & DESIGN
- Mechanical properties, degradation performance and cytotoxicity of Mg–Zn–Ca biomedical alloys with different compositions
- (2011) Baoping Zhang et al. Materials Science & Engineering C-Materials for Biological Applications
- Microstructure, cytotoxicity and corrosion of powder-metallurgical iron alloys for biodegradable bone replacement materials
- (2011) Bernd Wegener et al. Materials Science and Engineering B-Advanced Functional Solid-State Materials
- Synthesis and properties of topologically ordered porous magnesium
- (2011) N.T. Kirkland et al. Materials Science and Engineering B-Advanced Functional Solid-State Materials
- Fabrication of magnesium using selective laser melting technique
- (2011) Chi Chung Ng et al. RAPID PROTOTYPING JOURNAL
- Assessing the biocompatibility of degradable metallic materials: State-of-the-art and focus on the potential of genetic regulation☆
- (2010) Agung Purnama et al. Acta Biomaterialia
- Corrosion fatigue behaviors of two biomedical Mg alloys – AZ91D and WE43 – In simulated body fluid
- (2010) X.N. Gu et al. Acta Biomaterialia
- Effects of alloying elements (Mn, Co, Al, W, Sn, B, C and S) on biodegradability and in vitro biocompatibility of pure iron
- (2010) B. Liu et al. Acta Biomaterialia
- A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
- (2010) Lore Thijs et al. ACTA MATERIALIA
- Effect of Grain Size on Corrosion: A Review
- (2010) K. D. Ralston et al. CORROSION
- The effects of calcium and yttrium additions on the microstructure, mechanical properties and biocompatibility of biodegradable magnesium alloys
- (2010) Yuncang Li et al. JOURNAL OF MATERIALS SCIENCE
- Influence of Substrate Dislocation on Passivation of Pure Iron in pH 8.4 Borate Buffer Solution
- (2010) Takatoshi Yamamoto et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Effects of Zn on the microstructure, mechanical property and bio-corrosion property of Mg–3Ca alloys for biomedical application
- (2010) Hui Du et al. MATERIALS CHEMISTRY AND PHYSICS
- Synthesis of topologically-ordered open-cell porous magnesium
- (2010) Mark P. Staiger et al. MATERIALS LETTERS
- In vitro investigation of Fe30Mn6Si shape memory alloy as potential biodegradable metallic material
- (2010) B. Liu et al. MATERIALS LETTERS
- Development, characterization and clinical use of a biodegradable composite scaffold for bone engineering in oro-maxillo-facial surgery
- (2010) John E. Davies et al. Organogenesis
- Fe–Mn alloys for metallic biodegradable stents: Degradation and cell viability studies☆
- (2009) Hendra Hermawan et al. Acta Biomaterialia
- In vivo corrosion and corrosion protection of magnesium alloy LAE442☆
- (2009) F. Witte et al. Acta Biomaterialia
- Corrosion behaviour of AZ31 magnesium alloy with different grain sizes in simulated biological fluids☆
- (2009) M. Alvarez-Lopez et al. Acta Biomaterialia
- Design strategy for biodegradable Fe-based alloys for medical applications☆
- (2009) Michael Schinhammer et al. Acta Biomaterialia
- Microstructure, mechanical properties and bio-corrosion properties of Mg–Si(–Ca, Zn) alloy for biomedical application☆
- (2009) Erlin Zhang et al. Acta Biomaterialia
- Research on an Mg–Zn alloy as a degradable biomaterial
- (2009) Shaoxiang Zhang et al. Acta Biomaterialia
- Microstructure and corrosion behavior of coated AZ91 alloy by microarc oxidation for biomedical application
- (2009) Y.M. Wang et al. APPLIED SURFACE SCIENCE
- The effect of mean pore size on cell attachment, proliferation and migration in collagen–glycosaminoglycan scaffolds for bone tissue engineering
- (2009) Ciara M. Murphy et al. BIOMATERIALS
- A biodegradable polymer-based coating to control the performance of magnesium alloy orthopaedic implants
- (2009) Hoi Man Wong et al. BIOMATERIALS
- Degradable biomaterials based on magnesium corrosion
- (2009) Frank Witte et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Corrosion behaviors of Mg and its alloys with different Al contents in a modified simulated body fluid
- (2009) Zhaohui Wen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Bio-corrosion characterization of Mg–Zn–X (X = Ca, Mn, Si) alloys for biomedical applications
- (2009) F. Rosalbino et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Porous Metals and Metallic Foams: Current Status and Recent Developments
- (2008) L.-P. Lefebvre et al. ADVANCED ENGINEERING MATERIALS
- Characterization and degradation behavior of AZ31 alloy surface modified by bone-like hydroxyapatite for implant applications
- (2008) Cuilian Wen et al. APPLIED SURFACE SCIENCE
- Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique
- (2008) Garrett E. Ryan et al. BIOMATERIALS
- On the mechanisms of biocompatibility
- (2008) David F. Williams BIOMATERIALS
- In vitro degradation and mechanical integrity of calcium-containing magnesium alloys in modified-simulated body fluid
- (2008) M. Bobby Kannan et al. BIOMATERIALS
- Rapid prototyped porous titanium coated with calcium phosphate as a scaffold for bone tissue engineering
- (2008) Marco A. Lopez-Heredia et al. BIOMATERIALS
- The development of binary Mg–Ca alloys for use as biodegradable materials within bone
- (2008) Zijian Li et al. BIOMATERIALS
- In vitro corrosion and biocompatibility of binary magnesium alloys
- (2008) Xuenan Gu et al. BIOMATERIALS
- Metal release from stainless steel, Co–Cr–Mo–Ni–Fe and Ni–Ti alloys in vascular implants
- (2008) Yoshimitsu Okazaki et al. CORROSION SCIENCE
- Degradation of magnesium and its alloys: Dependence on the composition of the synthetic biological media
- (2008) Wolf-Dieter Mueller et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Short-Term Effects of Biocorrodible Iron Stents in Porcine Coronary Arteries
- (2008) RON WAKSMAN et al. JOURNAL OF INTERVENTIONAL CARDIOLOGY
- Biomaterials in orthopaedics
- (2008) M Navarro et al. Journal of the Royal Society Interface
- Preparation and characterization of a new biomedical magnesium–calcium alloy
- (2008) Yizao Wan et al. MATERIALS & DESIGN
- Influence of Ca on the corrosion properties of magnesium for biomaterials
- (2008) Woo-Cheol Kim et al. MATERIALS LETTERS
- Preparation, mechanical properties and in vitro biodegradation of porous magnesium scaffolds
- (2008) Huaye Zhuang et al. Materials Science & Engineering C-Materials for Biological Applications
- Microstructure, mechanical and corrosion properties and biocompatibility of Mg–Zn–Mn alloys for biomedical application
- (2008) Erlin Zhang et al. Materials Science & Engineering C-Materials for Biological Applications
- Biodegradable behaviors of AZ31 magnesium alloy in simulated body fluid
- (2008) Yingwei Song et al. Materials Science & Engineering C-Materials for Biological Applications
- Microstructure, mechanical properties and corrosion properties of Mg–Zn–Y alloys with low Zn content
- (2008) Erlin Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure, mechanical properties and bio-corrosion properties of Mg–Zn–Mn–Ca alloy for biomedical application
- (2008) Erlin Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Iron–manganese: new class of metallic degradable biomaterials prepared by powder metallurgy
- (2008) H. Hermawan et al. POWDER METALLURGY
- Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
- (2008) M. Geetha et al. PROGRESS IN MATERIALS SCIENCE
- Aluminum as a risk factor for Alzheimer's disease
- (2008) Pricilla Costa Ferreira et al. Revista Latino-Americana de Enfermagem
- Rapid Prototyping: Porous Titanium Alloy Scaffolds Produced by Selective Laser Melting for Bone Tissue Engineering
- (2008) Patrick H. Warnke et al. TISSUE ENGINEERING PART C-METHODS
- Vascularization in tissue engineering
- (2008) Jeroen Rouwkema et al. TRENDS IN BIOTECHNOLOGY
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now