4.7 Article

Design and experimental investigation of ultra-low frequency vibration isolation during neonatal transport

期刊

出版社

ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD
DOI: 10.1016/j.ymssp.2020.106633

关键词

Vibration isolation; Quasi zero stiffness; Incubator; Neonatal transport

资金

  1. National Natural Science Foundation of China [11972152, 11572116]
  2. China Scholarship Council

向作者/读者索取更多资源

To resolve the tough issue of ultra-low frequency vibration isolation during neonatal transport, a new incubator with quasi-zero-stiffness (QZS) isolators is proposed. In the new incubator, the infant housing unit is supported by the QZS isolators to mitigate mechanical vibration being transmitted from the ambulance floor to the infant. Each of the QZS isolators is devised by combining a pair of permanent magnet rings and a coil spring, and the design parameters are realized by the equivalent magnetic charge method. Both the prototypes of the QZS isolator and incubator are manufactured, and their vibration isolation performances are tested. The results show that the QZS isolator can fulfil vibration isolation from 2 Hz, and the incubator with four such QZS isolators is effective from 3.2 Hz under the designated payload. Most importantly, the acceleration response of the infant model in the housing unit is much lower than the base excitation, when the incubator is driven by a random base excitation with frequency bandwidth from 2 Hz to 15 Hz. (C) 2020 Elsevier Ltd. All rights reserved.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.7
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

Article Engineering, Mechanical

Force transmissibility of a two-stage vibration isolation system with quasi-zero stiffness

Xinlong Wang, Jiaxi Zhou, Daolin Xu, Huajiang Ouyang, Yong Duan

NONLINEAR DYNAMICS (2017)

Article Engineering, Mechanical

Sensitivity analysis of parametric errors on the performance of a torsion quasi-zero-stiffness vibration isolator

Kai Wang, Jiaxi Zhou, Daolin Xu

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)

Article Physics, Applied

Local resonator with high-static-low-dynamic stiffness for lowering band gaps of flexural wave in beams

Jiaxi Zhou, Kai Wang, Daolin Xu, Huajiang Ouyang

JOURNAL OF APPLIED PHYSICS (2017)

Article Acoustics

A novel quasi-zero-stiffness strut and its applications in six-degree-of-freedom vibration isolation platform

Jiaxi Zhou, Qingyu Xiao, Daolin Xu, Huajiang Ouyang, Yingli Li

JOURNAL OF SOUND AND VIBRATION (2017)

Article Acoustics

Vibration isolation in neonatal transport by using a quasi-zero-stiffness isolator

Jiaxi Zhou, Kai Wang, Daolin Xu, Huajiang Ouyang, Yimei Fu

JOURNAL OF VIBRATION AND CONTROL (2018)

Article Physics, Applied

Tunable low-frequency torsional-wave band gaps in a meta-shaft

Kai Wang, Jiaxi Zhou, Daolin Xu, Huajiang Ouyang

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2019)

Article Engineering, Mechanical

A nonlinear resonator with inertial amplification for very low-frequency flexural wave attenuations in beams

Jiaxi Zhou, Lingling Dou, Kai Wang, Daolin Xu, Huajiang Ouyang

NONLINEAR DYNAMICS (2019)

Article Physics, Applied

Low-frequency band gaps in a metamaterial rod by negative-stiffness mechanisms: Design and experimental validation

Kai Wang, Jiaxi Zhou, Qiang Wang, Huajiang Ouyang, Daolin Xu

APPLIED PHYSICS LETTERS (2019)

Article Engineering, Mechanical

Lower band gaps of longitudinal wave in a one-dimensional periodic rod by exploiting geometrical nonlinearity

Kai Wang, Jiaxi Zhou, Daolin Xu, Huajiang Ouyang

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Article Engineering, Multidisciplinary

Mathematical modeling and analysis of a meta-plate for very low-frequency band gap

Kai Wang, Jiaxi Zhou, Changqi Cai, Daolin Xu, Huajiang Ouyang

APPLIED MATHEMATICAL MODELLING (2019)

Article Engineering, Civil

Fabrication, dynamic properties and multi-objective optimization of a metal origami tube with Miura sheets

Jie Liu, Haifeng Ou, Rong Zeng, Jiaxi Zhou, Kai Long, Guilin Wen, Yi Min Xie

THIN-WALLED STRUCTURES (2019)

Article Mechanics

Design and numerical validation of quasi-zero-stiffness metamaterials for very low-frequency band gaps

Changqi Cai, Jiaxi Zhou, Linchao Wu, Kai Wang, Daolin Xu, Huajiang Ouyang

COMPOSITE STRUCTURES (2020)

Article Engineering, Mechanical

A semi-active metamaterial beam with electromagnetic quasi-zero-stiffness resonators for ultralow-frequency band gap tuning

Kai Wang, Jiaxi Zhou, Huajiang Ouyang, Li Cheng, Daolin Xu

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Article Acoustics

A Six Degrees-of-Freedom Vibration Isolation Platform Supported by a Hexapod of Quasi-Zero-Stiffness Struts

Jiaxi Zhou, Kai Wang, Daolin Xu, Huajiang Ouyang, Yingli Li

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2017)

Article Engineering, Mechanical

Approximate symplectic approach for mistuned bladed disk dynamic problem

Xuanen Kan, Yanjun Lu, Fan Zhang, Weipeng Hu

Summary: A blade disk system is crucial for the energy conversion efficiency of turbomachinery, but differences between blades can result in localized vibration. This study develops an approximate symplectic method to simulate vibration localization in a mistuned bladed disk system and reveals the influences of initial positive pressure, contact angle, and surface roughness on the strength of vibration localization.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2024)

Article Engineering, Mechanical

Dynamic characteristics of spur gear system with tooth root crack considering gearbox flexibility

Zimeng Liu, Cheng Chang, Haodong Hu, Hui Ma, Kaigang Yuan, Xin Li, Xiaojian Zhao, Zhike Peng

Summary: Considering the calculation efficiency and accuracy of meshing characteristics of gear pair with tooth root crack fault, a parametric model of cracked spur gear is established by simplifying the crack propagation path. The LTCA method is used to calculate the time-varying meshing stiffness and transmission error, and the results are verified by finite element method. The study also proposes a crack area share index to measure the degree of crack fault and determines the application range of simplified crack propagation path.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2024)

Article Engineering, Mechanical

A novel forward computational modal analysis method of the motor stator assembly considering core lamination and winding stacking

Rongjian Sun, Conggan Ma, Nic Zhang, Chuyo Kaku, Yu Zhang, Qirui Hou

Summary: This paper proposes a novel forward calculation method (FCM) for calculating anisotropic material parameters (AMPs) of the motor stator assembly, considering structural discontinuities and composite material properties. The method is based on multi-scale theory and decouples the multi-scale equations to describe the equivalence and equivalence preconditions of AMPs of two scale models. The effectiveness of this method is verified by modal experiments.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2024)

Article Engineering, Mechanical

An Intelligent Scheduling System and Hybrid Optimization Algorithm for Ship Locks of the Three Gorges Hub on the Yangtze River

Hao Zhang, Jiangcen Ke

Summary: This research introduces an intelligent scheduling system framework to optimize the ship lock schedule of the Three Gorges Hub. By analyzing navigational rules, operational characteristics, and existing problems, a mixed-integer nonlinear programming model is formulated with multiple objectives and constraints, and a hybrid intelligent algorithm is constructed for optimization.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2024)

Article Engineering, Mechanical

An enhanced ultrasonic method for monitoring and predicting stress loss in multi-layer structures via vibro-acoustic modulation

Jingjing He, Xizhong Wu, Xuefei Guan

Summary: A sensitivity and reliability enhanced ultrasonic method has been developed in this study to monitor and predict stress loss in pre-stressed multi-layer structures. The method leverages the potential breathing effect of porous cushion materials in the structures to increase the sensitivity of the signal feature to stress loss. Experimental investigations show that the proposed method offers improved accuracy, reliability, and sensitivity to stress change.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2024)

Article Engineering, Mechanical

Spectral estimation model for linear displacement and vibration monitoring with GBSAR system

Benyamin Hosseiny, Jalal Amini, Hossein Aghababaei

Summary: This paper presents a method for monitoring sub-second or sub-minute displacements using GBSAR signals, which employs spectral estimation to achieve multi-dimensional target detection. It improves the processing of MIMO radar data and enables high-resolution fast displacement monitoring from GBSAR signals.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2024)

Article Engineering, Mechanical

Transformer-based meta learning method for bearing fault identification under multiple small sample conditions

Xianze Li, Hao Su, Ling Xiang, Qingtao Yao, Aijun Hu

Summary: This paper proposes a novel method for bearing fault identification, which can accurately identify faults with few samples under complex working conditions. The method is based on a Transformer meta-learning model, and the final result is determined by the weighted voting of multiple models.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2024)

Article Engineering, Mechanical

Correlation warping radius tracking for condition monitoring of rolling bearings under varying operating conditions

Xiaomeng Li, Yi Wang, Guangyao Zhang, Baoping Tang, Yi Qin

Summary: Inspired by chaos fractal theory and slowly varying damage dynamics theory, this paper proposes a new health monitoring indicator for vibration signals of rotating machinery, which can effectively monitor the mechanical condition under both cyclo-stationary and variable operating conditions.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2024)

Article Engineering, Mechanical

Latching control: A wave energy converter inspired vibration control strategy

Hao Wang, Songye Zhu

Summary: This paper extends the latching mechanism to vibration control to improve energy dissipation efficiency. An innovative semi-active latched mass damper (LMD) is proposed, and different latching control strategies are tested and evaluated. The latching control can optimize the phase lag between control force and structural response, and provide an innovative solution to improve damper effectiveness and develop adaptive semi-active dampers.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2024)

Article Engineering, Mechanical

A hierarchical Bayesian modeling framework for identification of Non-Gaussian processes

Menghao Ping, Xinyu Jia, Costas Papadimitriou, Xu Han, Chao Jiang, Wang-Ji Yan

Summary: Identification of non-Gaussian processes is a challenging task in engineering problems. This article presents an improved orthogonal series expansion method to convert the identification of non-Gaussian processes into a finite number of non-Gaussian coefficients. The uncertainty of these coefficients is quantified using polynomial chaos expansion. The proposed method is applicable to both stationary and nonstationary non-Gaussian processes and has been validated through simulated data and real-world applications.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2024)

Article Engineering, Mechanical

Double mechanical frequencies locking phenomenon in a piezoelectric driven 3-DOF magnetic coupling resonator

Lei Li, Wei Yang, Dongfa Li, Jianxin Han, Wenming Zhang

Summary: The frequency locking phenomenon induced by modal coupling can effectively overcome the dependence of peak frequency on driving strength in nonlinear resonant systems and improve the stability of peak frequency. This study proposes the double frequencies locking phenomenon in a three degrees of freedom (3-DOF) magnetic coupled resonant system driven by piezoelectricity. Experimental and theoretical investigations confirm the occurrence of first frequency locking and the subsequent switching to second frequency locking with the increase of driving force. Furthermore, a mass sensing scheme for double analytes is proposed based on the double frequencies locking phenomenon.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2024)

Article Engineering, Mechanical

Torsional vibration attenuation of a closed-loop engine crankshaft system via the tuned mass damper and nonlinear energy sink under multiple operating conditions

Kai Ma, Jingtao Du, Yang Liu, Ximing Chen

Summary: This study explores the feasibility of using nonlinear energy sinks (NES) as replacements for traditional linear tuned mass dampers (TMD) in practical engineering applications, specifically in diesel engine crankshafts. The results show that NES provides better vibration attenuation for the crankshaft compared to TMD under different operating conditions.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2024)

Article Engineering, Mechanical

Mixed-flow pump cavitation characteristics extraction based on power spectrum density through pressure pulsation signal analysis

Wentao Xu, Li Cheng, Shuaihao Lei, Lei Yu, Weixuan Jiao

Summary: In this study, a high-precision hydraulic mechanical stand and a vertical mixed-flow pumping station device were used to conduct research on cavitation signals of mixed-flow pumps. By analyzing the water pressure pulsation signal, it was found that the power spectrum density method is more sensitive and capable of extracting characteristics compared to traditional time-frequency domain analysis. This has significant implications for the identification and prevention of cavitation in mixed-flow pump machinery.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2024)

Article Engineering, Mechanical

Design of a two-stage compliant asymmetric piezoelectrically actuated microgripper with parasitic motion compensation

Xiaodong Chen, Kang Tai, Huifeng Tan, Zhimin Xie

Summary: This paper addresses the issue of parasitic motion in microgripper jaws and its impact on clamping accuracy, and proposes a symmetrically stressed parallelogram mechanism as a solution. Through mechanical modeling and experimental validation, the effectiveness of this method is demonstrated.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2024)

Article Engineering, Mechanical

Influences of inclined crack defects on vibration characteristics of cylindrical roller bearings

Zhifeng Shi, Gang Zhang, Jing Liu, Xinbin Li, Yajun Xu, Changfeng Yan

Summary: This study provides useful guidance for early bearing fault detection and diagnosis by investigating the effects of crack inclination and propagation direction on the vibration characteristics of bearings.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2024)