Article
Chemistry, Physical
Patrick Muenster, Marcel Diehl, Joop Enno Frerichs, Markus Boerner, Michael Ryan Hansen, Martin Winter, Philip Niehoff
Summary: The study demonstrates that applying a 2C C-rate can reduce the formation time of lithium ion batteries, but may also result in the occurrence of lithium plating. However, using different C-rates during formation process does not significantly affect the thermal safety and cycling performance.
JOURNAL OF POWER SOURCES
(2021)
Article
Electrochemistry
Chunmei Tang, Shouzheng Wang, Kaixiao Zhanga Shouzheng, Chun Cheng
Summary: The bilayer beta-Bi shows thermodynamical stability, good electrical conductivity, small volume expansion ratio, and fast charge/discharge rate as a promising anode material for Li-ion batteries, offering higher cycle efficiency and avoiding rapid capacity decline.
ELECTROCHIMICA ACTA
(2021)
Article
Chemistry, Physical
Maya Horii, Rebecca J. Christianson, Heena Mutha, John Christopher Bachman
Summary: The microstructure of solid electrolyte has a significant impact on the overall performance of batteries. To maintain high energy and power output, the conductivity to thickness ratio of the electrolyte must be above 10 S m(-2), and the grain size needs to be at least 10,000 times larger than the grain boundary thickness.
JOURNAL OF POWER SOURCES
(2022)
Article
Materials Science, Ceramics
Rui He, Aijia Wei, Xue Bai, Lihui Zhang, Xiaohui Li, Jinping Mu, Xi Zhang, Jianmin Ge, Zhenfa Liu
Summary: The recent development of Li-ion batteries based on Ni-rich cathodes with high specific capacity has sparked significant interest. However, the challenge of rapid capacity decay and poor thermal stability faced by cathodes with high Ni concentration has prompted the exploration of alternative solutions, such as in situ coating methods like the application of a LaPO4/Li3PO4 (LP) layer. The LP-modified cathode material demonstrates improved capacity retention and resistance to microcracking during charge/discharge cycling.
CERAMICS INTERNATIONAL
(2021)
Article
Chemistry, Physical
Wei Sun, Q. M. Li, Ping Xiao, Paola Carbone
Summary: This study investigates the impact of compressed separators on the electrochemical performance of Li-ion batteries (LIBs) and its underlying mechanisms. Two commercial separators, polypropylene (PP) and polyethylene (PE), with different compressive behaviors were examined. The tortuosity values of compressed PP and PE separators were determined using Electrochemical Impedance Spectrum (EIS) tests. LIBs with compressed PP and PE separators were tested for their capacity performance, revealing that the critical compressive strain for significant reduction in LIB's capacity is the onset strain of densifications. The experimental observations are supported by COMSOL modeling results.
JOURNAL OF POWER SOURCES
(2023)
Article
Energy & Fuels
Josu Olmos, Inigo Gandiaga, Andoni Saez-de-Ibarra, Xabier Larrea, Txomin Nieva, Iosu Aizpuru
Summary: This paper presents empirical cycling degradation models designed for NMC and LFP lithium-ion battery chemistries, built upon large sets of degradation data collected from the literature and validated with low mean absolute errors. The analysis of the models focuses on the impact of different stress factors on the overall degradation of the battery chemistries, providing guidance for selecting the best cell reference for a specific application.
JOURNAL OF ENERGY STORAGE
(2021)
Article
Chemistry, Physical
Adrien Soloy, Delphine Flahaut, Joachim Allouche, Dominique Foix, Germain Salvato Vallverdu, Emmanuelle Suard, Erwan Dumont, Lucille Gal, Francois Weill, Laurence Croguennec
Summary: The particle size has a significant impact on the electrochemical performance and reactivity of the layered oxide LiNi0.6Mn0.2Co0.2O2, with materials in the particle size range of 200-400 nm showing better reversible capacity and cyclability.
ACS APPLIED ENERGY MATERIALS
(2022)
Article
Chemistry, Physical
Tianye Zheng, Jia Zhang, Wei Jin, Steven T. Boles
Summary: This research demonstrates the strategic thermal control in cycling aluminum anodes to improve the cycling performance of lithium-ion batteries. The electrochemical formation of specific phases at slightly elevated temperatures enables higher capacity and stable cycling. The findings suggest that thermal conditions explored in this study can be applied in various applications and create synergies with practical scenarios.
ACS APPLIED ENERGY MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
S. Vauthier, M. Alvarez-Tirado, G. Guzman-Gonzalez, L. C. Tome, S. Cotte, L. Castro, A. Gueguen, D. Mecerreyes, N. Casado
Summary: The role of binders is crucial to achieve high performance and long cycle lives in next-generation electrodes for lithium batteries. In this study, PDADMA poly(ionic liquid)s with fluorinated anions were used as cathode binders in Li-ion and Li-air batteries, showing improved cell performances and enhanced capacity values, rate performance, and cycling stability. The proposed fluorinated PDADMA Poly(ionic liquid)s can be a highly competitive alternative to conventional binders used nowadays in Li-ion and Li-air batteries.
MATERIALS TODAY CHEMISTRY
(2023)
Article
Chemistry, Physical
U. Younis, I. Muhammad, F. Qayyum, W. Wu, Q. Sun
Summary: A novel two-dimensional pentadiamond monolayer C-558 composed of pentagons and octagons is proposed, showing metallic properties and high ion adsorption sites, suitable for high-performance lithium, sodium, and potassium ion batteries.
MATERIALS TODAY ENERGY
(2021)
Article
Chemistry, Physical
Shuang Xia, Qi Zhou, Bohao Peng, Xingpeng Zhang, Lili Liu, Fei Guo, Lijun Fu, Tao Wang, Yankai Liu, Yuping Wu
Summary: The study focuses on improving the performance of Li-S batteries by modifying commercial separators, effectively alleviating the 'shuttle effect' and corrosion of the lithium anodes. The modified separators show low charge transfer resistance and can physically barrier and catalytically convert polysulfides into Li2S, thus preventing anode corrosion and suppressing the 'shuttle effect'. The research provides valuable insights for the future commercialization of Li-S batteries.
MATERIALS TODAY ENERGY
(2022)
Article
Chemistry, Physical
Sergey Yu. Luchkin, Maria A. Kirsanova, Dmitry A. Aksyonov, Svetlana A. Lipovskikh, Victoria A. Nikitina, Artem M. Abakumov, Keith J. Stevenson
Summary: Li-rich layered metal oxides have been extensively studied as potential positive electrode materials for Li-ion batteries. This research investigates the cycling-driven electrochemical activation process in Li-rich materials, which leads to an increase in reversible capacity. The activation process involves oxidation and reduction reactions, with the rate being influenced by the cycling rate.
ACS APPLIED ENERGY MATERIALS
(2022)
Review
Chemistry, Multidisciplinary
Ziling Chen, Qian Zhang, Qijie Liang
Summary: The development of lithium-ion batteries heavily relies on the optimization of cathode materials, and carbon coating has been recognized as an effective strategy for meeting the demands of lithium-ion battery cathodes. This review focuses on the mechanisms and methods of carbon coating modification, as well as the recent progress and limitations of carbon coating on various cathode materials. Suggestions for improving the effectiveness of carbon coating in future studies are also provided.
Article
Chemistry, Applied
Hua Kong, Jiafeng Wu, Ying Han, Yu Zhang, Ning Zhou, Qi Chen, Wentao Sun, Huanping Zhou, Lian-Mao Peng
Summary: Recent progress has shown that perovskite can be used as a potential candidate for effective energy storage material. By adjusting the dimensionality of perovskite, high-performing one-dimensional hybrid perovskite-based lithium-ion batteries have been fabricated, with a significantly higher specific capacity compared to traditional perovskite and commercialized graphite electrode.
JOURNAL OF ENERGY CHEMISTRY
(2022)
Review
Chemistry, Physical
Zhaojin Li, Jinxing Yang, Tianjia Guang, Bingbing Fan, Kongjun Zhu, Xiaohui Wang
Summary: This paper summarizes the recent progress in controlled hydrothermal/solvothermal synthesis of LiFePO4 and explores the relationship between the synthesis conditions and the nucleation-and-growth of LiFePO4. The review covers surface decoration, lattice substitution, and defect control, while also discussing new research directions and future trends in the field.
Article
Engineering, Mechanical
M. M. Rashid, Md Meftahul Ferdaus, Muhammad Hasibul Hasan, Ataur Rahman
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
(2015)
Article
Mechanics
Raju Ahamed, Muhammad Mahbubur Rashid, Md Meftahul Ferdaus, Hazlina Md. Yusof
KOREA-AUSTRALIA RHEOLOGY JOURNAL
(2016)
Review
Green & Sustainable Science & Technology
Sazib Mollik, M. M. Rashid, M. Hasanuzzaman, M. E. Karim, M. Hosenuzzaman
RENEWABLE & SUSTAINABLE ENERGY REVIEWS
(2016)
Proceedings Paper
Engineering, Aerospace
R. Mizanur, M. M. Rashid, A. Rahman, A. H. M. Zahirul Alam, S. Ihsan, M. S. Mollik
3RD INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND AEROSPACE ENGINEERING 2016
(2017)
Proceedings Paper
Engineering, Aerospace
Mohammad Abdul Aziz, Rami Ali Al-Khulaidi, M. M. Rashid, M. R. Islam, M. A. N. Rashid
3RD INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND AEROSPACE ENGINEERING 2016
(2017)
Article
Electrochemistry
Muhammad Rashid, Amit Gupta
ELECTROCHIMICA ACTA
(2017)
Proceedings Paper
Engineering, Electrical & Electronic
M. Rabani M. Romlay, M. M. Rashid, S. F. Toha
PROCEEDINGS OF 6TH INTERNATIONAL CONFERENCE ON COMPUTER AND COMMUNICATION ENGINEERING (ICCCE 2016)
(2016)
Proceedings Paper
Engineering, Electrical & Electronic
Zaw Lay Htoon, Shahrul Na'im Sidek, Sado Fatai, Muhammad Mahbubur Rashid
PROCEEDINGS OF 6TH INTERNATIONAL CONFERENCE ON COMPUTER AND COMMUNICATION ENGINEERING (ICCCE 2016)
(2016)
Proceedings Paper
Engineering, Electrical & Electronic
Mohamad Hilmi bin Mat Idris, Muhammad Al Azhari bin Che Kamarudin, Muhammad Irsyad Sahalan, Zulkifli bin Zainal Abidin, Muhammad Mahbubur Rashid
PROCEEDINGS OF 6TH INTERNATIONAL CONFERENCE ON COMPUTER AND COMMUNICATION ENGINEERING (ICCCE 2016)
(2016)
Article
Mathematics
M. Ahmed, M. Y. Hazlina, M. M. Rashid
MALAYSIAN JOURNAL OF MATHEMATICAL SCIENCES
(2016)
Proceedings Paper
Computer Science, Artificial Intelligence
Md. Nasir Uddin, M. M. Rashid, M. Rubaiyat, Belayet Hossain, S. M. Salam, N. A. Nithe
2015 18th International Conference on Computer and Information Technology (ICCIT)
(2015)
Proceedings Paper
Automation & Control Systems
M. J. H. Khan, M. M. Rashid, M. M. Ferdaus
2015 10TH ASIAN CONTROL CONFERENCE (ASCC)
(2015)
Proceedings Paper
Engineering, Electrical & Electronic
M. N. Uddin, M. M. Rashid, Ahmad M. Tahir, M. Parvez, M. F. M. Elias, M. M. Sultan, Raddadi
2015 INTERNATIONAL CONFERENCE ON ELECTRICAL & ELECTRONIC ENGINEERING (ICEEE)
(2015)
Article
Automation & Control Systems
Amir Akramin Shafie, Azhar Bin Mohd Ibrahim, Muhammad Mahbubur Rashid
INTERNATIONAL JOURNAL OF AUTOMATION AND COMPUTING
(2014)