期刊
ENERGY CONVERSION AND MANAGEMENT
卷 86, 期 -, 页码 28-38出版社
PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.enconman.2014.05.013
关键词
Microchannel heat sink; CuO/water and Al2O3/water nanofluids; Heat transfer coefficient; Pressure drop
Single phase forced convective heat transfer and fluid flow of CuO/water and Al2O3/water nanofluids have been experimentally investigated in a microchannel heat sink (MCHS). The heat sink consisted of 17 rectangular cross section microchannels with the dimensions of 400 mu m x 560 mu m. All the experiments have been performed at constant heat flux of 19 W/cm(2) and at the laminar flow regime 500 < Re < 2000. Heat transfer coefficient, Nu number, and also pressure drop in the MCHS have been measured and compared with the conventional correlations. Both nanofluids showed greater heat transfer performance and larger pressure drop in comparison with pure water. Results indicated that 0.2 vol.% CuO and 1 vol.% Al2O3 nanofluids enhanced the heat transfer coefficient up to 27% and 49%, respectively. In this regards, CuO nanoparticle was more efficient since it could be used in lower concentration. Furthermore, it was shown that the heat transfer coefficient increased with increasing the nanoparticle concentration but it was not true to say that the heat transfer enhancement increased with Reynolds number. The results of this study in conjunction with previous papers indicated that lower Nu numbers and higher heat transfer coefficients would be obtained in the MCHS in comparison with the conventional diameter heat exchangers. It showed the greater importance of both conductive and convective heat transfer mechanisms in this kind of heat exchangers. (C) 2014 Elsevier Ltd. All rights reserved.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据