Article
Materials Science, Composites
Patcharapon Somdee, Manauwar Ali Ansari, Kalman Marossy
Summary: In this study, flexible and rigid polyurethane/copper composites were prepared via a simple solution casting process. The dispersion and chemical bonding of the filler were investigated, and the thermal properties and mechanical properties of the composites were analyzed. The results showed that the thermal conductivity of the composites was significantly improved compared to the pure polyurethane, and the mechanical properties were also enhanced. The study suggests that copper microparticles can serve as an active filler in both flexible and rigid polyurethane matrices.
POLYMER COMPOSITES
(2023)
Article
Materials Science, Composites
Zixuan Chen, Tianyu Yu, Yun-Hae Kim, Zetian Yang, Yan Li, Tao Yu
Summary: This study aims to investigate the mechanical properties of basalt fiber reinforced polymers (BFRPs) with the incorporation of different structured nanoclays, and to improve their interfacial bonding through experimental methods. The results show that a flattened nanoclay structure is more effective for enhancing the modulus, and the inclusion of different structured nanoclays also improves the interlaminar strength and toughness of BFRPs.
COMPOSITES SCIENCE AND TECHNOLOGY
(2021)
Article
Materials Science, Composites
Ting Gu, De-xiang Sun, Xu Xie, Xiao-dong Qi, Jing-hui Yang, Yan-zhou Lei, Yong Wang
Summary: This article introduces a method for preparing renewable high thermal conductivity composites and investigates their thermal and mechanical properties. The results show that the composites exhibit high thermal conductivity, good mechanical properties, flame retardancy, and electrical conductivity.
COMPOSITES SCIENCE AND TECHNOLOGY
(2022)
Article
Polymer Science
Zhifeng Wang, Jun Tong, Wei Li, Haichen Zhang, Manfeng Hu, Haichu Chen, Hui He
Summary: In this study, polypropylene/graphite intercalation compound (PP/GIC) composites were prepared at different temperatures through melt mixing, demonstrating improved dispersion and performance at higher temperatures, suggesting potential applications.
Article
Materials Science, Composites
Bo Niu, Haochen Shen, Tong Li, Hongyu Zhang, Zhen Qian, Yu Cao, Yayun Zhang, Donghui Long
Summary: In this study, phenolic-based composites with co-optimized thermal insulation and mechanical properties were prepared by adjusting resin concentration and fabric braiding angle. The resulting composites exhibited lower density and thermal conductivity, higher tensile strength, and comparable ablation resistance.
COMPOSITES SCIENCE AND TECHNOLOGY
(2022)
Article
Polymer Science
Chenping Zhang, Yugang Duan, Hong Xiao, Ben Wang, Yueke Ming, Yansong Zhu, Fugan Zhang
Summary: This paper investigates the interlaminar bond strength of laser in-situ consolidation CF/PEEK thermoplastic composites. The results show that porosity significantly affects the interlaminar shear strength, while there is no correlation between crystallinity and interlaminar shear strength. The interlaminar shear strength in the heated tool in-situ consolidation group is significantly higher than the constant pressure in-situ consolidation group.
Article
Engineering, Manufacturing
Fuzhong Wang, Bohang Wang, Ya Zhang, Fei Zhao, Zihan Qiu, Lin Zhou, Shiwei Chen, Minxian Shi, Zhixiong Huang
Summary: Graphene nanoplatelets/silicon carbide nanowires hybrid films were successfully produced and used as reinforcements for laminated composites. The incorporation of silicon carbide nanowires significantly improved the thermal conductivity of the composites. The hybrid films also enhanced the storage modulus and interlaminar shear strength of the composites.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
(2022)
Article
Nanoscience & Nanotechnology
Ping Tang, Zijian Zhang, Chenxin Guo, Shaohua Zeng, Pengpeng Chen, Ying Xu, Wangyan Nie, Yifeng Zhou
Summary: Carbon nanotubes have great potential for use in microelectronic packaging due to their excellent thermal conductivities. However, their high electroconductibility and poor radial conductivity limit their application in insulating materials. In this study, a heterostructured brushlike hybrid was prepared by anchoring amine-functionalized multiwalled carbon nanotubes onto insulating montmorillonite. The resulting composites exhibited improved thermal conductivity, mechanical properties, and thermal stability, providing a promising strategy for fabricating polymer composites.
ACS APPLIED NANO MATERIALS
(2022)
Article
Engineering, Manufacturing
Yuge Ouyang, Liuyang Bai, Huafeng Tian, Xiaofei Li, Fangli Yuan
Summary: This paper reviews the current progress in the development of Al2O3 reinforced polymer composites, including preparation methods, heat conduction mechanisms, factors affecting thermal conductivity, methods for improving thermal conductivity, and emerging applications. It also identifies several outstanding issues that need to be addressed in order to achieve higher thermal conductivity.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
(2022)
Article
Materials Science, Composites
Chenglin Li, Hao Zhang, Xiaowen Zhang, Zechao Zhang, Nan Li, Ying Liu, Xiuting Zheng, Dali Gao, Daming Wu, Jingyao Sun
Summary: With the continuous development of modern electronic equipment, thermal management of electronic devices has become increasingly important. This study focuses on developing electronic equipment shells with superior thermal conductivity and mechanical properties. A bi-continuous structure is used to balance the relationship between thermal conductivity and mechanical properties.
COMPOSITES SCIENCE AND TECHNOLOGY
(2022)
Article
Polymer Science
Alexander Poellinger, Thomas Koch, Stefan Krenn, Fabian Wilde, Domonkos Tolnai, Bernhard Plank, Sarah Heupl, Johannes Bernardi, Karin Whitmore, Marc Langela, Sandra Seichter, Michael Schoebel
Summary: Efficient transport of hydrogen is crucial for the widespread adoption of renewable energy. Reciprocating piston compressors with high strength non-lubricated sealing solutions are key technologies to meet the demands for gas purity and high-pressure gradients in hydrogen applications.
Article
Materials Science, Composites
Yingze Li, Nuo Xu, Hanxiong Lyu, Naiyu Jiang, Hongyan Zhang, Nan Zhou, Dongxing Zhang
Summary: In this study, a mixture sizing agent containing hydroxylated boron nitride and polyetherimide was synthesized to improve the interfacial adhesion between carbon fiber and polyetheretherketone. The synergistic effects of hydrogen bonding, 7C-7C interaction, and good compatibility were evaluated to enhance the miscibility, mechanical properties, and tribological properties of the composites.
COMPOSITES SCIENCE AND TECHNOLOGY
(2023)
Article
Polymer Science
Yevgen Mamunya, Oleksii Maruzhenko, Roman Kolisnyk, Maksym Iurzhenko, Andrii Pylypenko, Olha Masiuchok, Marcin Godzierz, Igor Krivtsun, Barbara Trzebicka, Sebastien Pruvost
Summary: Electrothermal processes were investigated in pyroresistive composites of high-density polyethylene with carbon black and carbon fibers. The kinetic heating curves showed an exponential dependence with a heating rate constant for each composite. Equilibrium temperature was reached after a short heating time, and decreased with the presence of positive temperature coefficient of resistance (PTC) effect. The composites exhibited self-regulating capability and the equilibrium temperature depended on the applied voltage and electric power with different relationships. An application of using HDPE-CB composite as a heating element for resistance welding was demonstrated.
Article
Engineering, Manufacturing
Zheng Liu, Xiaoli Fan, Junliang Zhang, Zhiyong Yang, Yusheng Tang, Jianwei Li, Jie Kong, Junwei Gu
Summary: The introduction of hyperbranched structure and fluorine groups in epoxy-preFHBPBO significantly improved the mechanical properties and wave-transparent performance of PBO fibers reinforced BADCy resins composites. The addition of 7 wt% epoxy-preFHBPBO increased the flexural strength and interlaminar shear strength, while reducing dielectric constant and dielectric loss compared to PBO fibers/BADCy composites. Moreover, the volume resistivity and breakdown strength were also enhanced in PBO fibers/FHBPBO-co-BADCy composites.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
(2021)
Article
Engineering, Manufacturing
Bo Zhang, Shaohua Wu, Chuncheng Li, Yaonan Xiao, Jiajian Liu
Summary: A unique selective exfoliation method was developed to prepare micro/nano-PBO composite paper, which greatly improved its mechanical properties while preserving its ultrahigh heat resistance. The structurally optimized composite paper exhibited significantly enhanced mechanical strength, modulus, and electrical breakdown strength, making it a promising electrical insulating material for extreme environments.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
(2022)
Article
Engineering, Multidisciplinary
Keyu Zhu, Xitao Zheng, Jing Peng, Jiaming Sun, Ruilin Huang, Leilei Yan
Summary: This paper discusses the influence of multiple impacts on the compression strength of honeycomb sandwich structures with composite face sheets. It is found that the size of the impactor affects the turning point of the compression strength. Additionally, high impact energy leads to damage in the bottom face sheet and reduces the overall compression strength.
COMPOSITES PART B-ENGINEERING
(2024)
Article
Engineering, Multidisciplinary
Danqian Wang, Yanfei Yue, Jueshi Qian
Summary: Magnesium Potassium Phosphate Cement (MKPC) as a binder for steel rebars shows improved corrosion resistance when subjected to carbonation, due to the increase in pH and the formation of a more protective oxide film.
COMPOSITES PART B-ENGINEERING
(2024)
Article
Engineering, Multidisciplinary
Zhibin Li, Wenyu Wang, Pengcheng Xue, Xingyu Wei, Jian Xiong
Summary: This work proposes a design approach and manufacturing method for carbon fiber reinforced plastic (CFRP) corrugated sandwich truncated cones (CSTC) to improve their anti-debonding ability and ensure reliability. The study establishes theoretical models for CSTCs' stiffness and failure modes, which are verified through experiments and finite element analysis (FEA). The research reveals the effect of geometric parameters on failure modes and performs an optimal design for CSTC structures. The findings have significant implications for the design and application of lightweight CSTCs in constructions, such as launch vehicle adapters.
COMPOSITES PART B-ENGINEERING
(2024)
Article
Engineering, Multidisciplinary
Mingyu Zhang, Lei Chu, Jiahua Chen, Fuxun Qi, Xiaoyan Li, Xinliang Chen, Deng-Guang Yu
Summary: This review summarizes the different structures and construction methods of fibrous membranes with asymmetric wettability. It also reviews the biological applications of these membranes and suggests future challenges.
COMPOSITES PART B-ENGINEERING
(2024)
Article
Engineering, Multidisciplinary
E. Mofakhami, L. Gervat, B. Fayolle, G. Miquelard-Garnier, C. Ovalle, L. Laiarinandrasana
Summary: This study investigates the effects of fibre concentration on the mechanical response of welded glass-fibre-reinforced polypropylene (GF-PP). Experimental observations reveal a significant reduction in weld ratio, up to 60%, indicating a decreased strength compared to the bulk material. Increasing fibre content in the welded material results in a decrease in stress at break and strain at the maximum stress. The use of DIC technique and X-ray microtomography further confirms the localized strain amplification in the welded zone due to the significant increase in fibre density.
COMPOSITES PART B-ENGINEERING
(2024)
Article
Engineering, Multidisciplinary
Emad Pourahmadi, Farjad Shadmehri, Rajamohan Ganesan
Summary: This research compares the mechanical properties of laminates manufactured using automated fiber placement and conventional autoclave curing methods. The results show that laminates manufactured using automated fiber placement have a lower interlaminar shear strength compared to laminates reconsolidated using autoclave curing. A finite element simulation method is proposed to quantitatively analyze these differences.
COMPOSITES PART B-ENGINEERING
(2024)
Article
Engineering, Multidisciplinary
Johnny Jakobsen, Benny Endelt, Fahimeh Shakibapour
Summary: This study proposes a new bolted/pinned joining method for composite applications, which improves load transfer by introducing a patch-type reinforcement. Experimental results demonstrate significant improvements in both static and fatigue load conditions compared to existing methods. Finite element simulations highlight the advantage of this method, as it creates a more efficient load-transferring mechanism through different stress distributions.
COMPOSITES PART B-ENGINEERING
(2024)
Article
Engineering, Multidisciplinary
Gisele G. Cintra, Janine D. Vieira, Daniel C. T. Cardoso, Thomas Keller
Summary: This paper proposes a novel approach to assess multi-crack behavior in layered fiber-polymer composites. The generated Compliance and R-curves provide useful insights into understanding the multiple delamination process and allow for separate evaluation of strain energy release rate (SERR) for each crack. The developed cohesive zone model successfully simulates the failure process zone of three parallel cracks, showing good agreement between the numerical model and experimental results.
COMPOSITES PART B-ENGINEERING
(2024)
Article
Engineering, Multidisciplinary
Renil Thomas Kidangan, Sreedhar Unnikrishnakurup, C. Krishnamurthy, Krishnan Balasubramaniam
Summary: The induction heating process can accurately identify fiber orientation and stacking order, making it a valuable tool for large-area inspection and quality control in manufacturing fiber-reinforced composites.
COMPOSITES PART B-ENGINEERING
(2024)
Article
Engineering, Multidisciplinary
Sungjun Hwang, Yousoo Han, Douglas J. Gardner
Summary: Bleached Kraft pulp, unbleached Kraft pulp, and old corrugated cardboard pulp are suitable for producing cellulose nanofibril suspensions. Spray drying is a fast, simple, cost-effective, and scalable drying method. Spray-dried cellulose nanofibrils can be used as reinforcing materials in polypropylene matrices. The particle size of cellulose nanofibrils affects the material properties.
COMPOSITES PART B-ENGINEERING
(2024)
Article
Engineering, Multidisciplinary
Mehdi Mahdavi, Abbas Zolfaghari
Summary: This study aims to improve the recovery forces of shape memory polymers (SMPs) through material extrusion additive manufacturing. By using glass fiber (GF) as reinforcement and manufacturing multi-layer composite specimens, it was found that PLA with 6.62% GF exhibited the best recovery force, which was further optimized through annealing heat treatment.
COMPOSITES PART B-ENGINEERING
(2024)
Review
Engineering, Multidisciplinary
Xiang Ao, Antonio Vazquez-Lopez, Davide Mocerino, Carlos Gonzalez, De-Yi Wang
Summary: The vulnerability of natural fibers to heat and fire poses a significant challenge for their substitution of traditional fiber reinforcements in composite materials. Natural fiber/polymer composites (NFCs) are regarded as potential candidates for engineering applications due to their environmental friendliness and low-impact sourcing. Thus, appropriate approaches need to be implemented to enhance the fire safety of NFCs. This review summarizes and discusses the latest understanding of flammability and thermal properties of natural fibers, with a special focus on their interaction with polymer matrix in fire behavior. Additionally, the latest developments in flame-retardant approaches for NFCs are reviewed, covering both flame retardancy and fire structural integrity. Finally, future prospects and perspectives on fire safety of NFCs are proposed, providing insights into further advancements of NFCs.
COMPOSITES PART B-ENGINEERING
(2024)
Article
Engineering, Multidisciplinary
Cheng Wang, Siqi Huo, Guofeng Ye, Bingtao Wang, Zhenghong Guo, Qi Zhang, Pingan Song, Hao Wang, Zhitian Liu
Summary: The demand for multifunctional, transparent epoxy resin with superior dielectric, mechanical, and fire-safety performances is increasing in modern industries. Researchers have developed an epoxidized, phosphaphenanthrene-containing poly(styrene butadiene styrene) (ESD) for advanced fire-safe epoxy resin, which maintains high transparency and improves UV-blocking property. The addition of 10 wt% ESD results in improved mechanical properties, decreased dielectric constant and loss, and outperformance compared to other fire-safe epoxy resins. This research provides an effective method for developing multifunctional flame-retardant epoxy resin.
COMPOSITES PART B-ENGINEERING
(2024)
Article
Engineering, Multidisciplinary
Bo Pang, Heping Zheng, Zuquan Jin, Dongshuai Hou, Yunsheng Zhang, Xiaoyun Song, Yanan Sun, Zhiyong Liu, Wei She, Lin Yang, Mengyuan Li
Summary: This study develops an internal superhydrophobic material (ISM) using waste denitrification fly ash, which maintains stable hydrophobicity under harsh conditions of use and does not rely on expensive fluor-based surface modifications. The synthesized ISM has excellent matrix strength, strong waterproof properties, and retains superhydrophobicity even at damaged or friction interfaces.
COMPOSITES PART B-ENGINEERING
(2024)
Article
Engineering, Multidisciplinary
Meirbek Mussatayev, Qiuji Yi, Mark Fitzgerald, Vincent K. Maes, Paul Wilcox, Robert Hughes
Summary: Real-time monitoring of carbon fibre composites during Automated Fibre Placement (AFP) manufacturing remains a challenge for non-destructive evaluation (NDE) techniques. This study designed a directional eddy-current (EC) probe to evaluate the detectability of out-of-plane wrinkles. Experimental evaluations and finite element modeling were conducted to better understand the relationship between eddy-current density and defect detection. The findings suggest that the probe configuration with an asymmetric driver coil and differential pickup coils shows the best capability for wrinkle detection.
COMPOSITES PART B-ENGINEERING
(2024)