Article
Chemistry, Physical
Leah Nation, Yan Wu, Xiaoming Liu, Miaofang Chi, Yuqin Wu, Yue Qi, Brian W. Sheldon
Summary: The study showed that Si-doping significantly improved the discharge capacity of Li-rich cathodes by around 25%, delayed surface phase transformation, and altered redox behavior. Electron energy loss spectroscopy supported the notion that the surface layer of the cathode had an altered oxygen electronic environment. Si-doping increased oxygen vacancy formation, changed redox couple sequence, effectively controlling the complex charge compensation mechanisms in the cathodes.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
(2021)
Review
Chemistry, Physical
Xin Cao, Yu Qiao, Min Jia, Ping He, Haoshen Zhou
Summary: This study reviews the potential application of Li-rich and Li-excess oxides as cathode materials for next-generation Li-ion batteries, discusses the challenges in using Li-excess oxides, and explores mechanisms to address these issues. Future research directions in the field are also proposed based on advanced characterizations and theory calculations.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Darsi Rambabu, Alae Eddine Lakraychi, Jiande Wang, Louis Sieuw, Deepak Gupta, Petru Apostol, Geraldine Chanteux, Tom Goossens, Koen Robeyns, Alexandru Vlad
Summary: In this study, electrically conducting Li-ion MOF cathodes were developed by rational control of the ligand to transition metal stoichiometry and SBU topology. The research not only enabled reversible redox but also significantly increased the electrical conductivity, demonstrating the concept of reversible redox activity and electronic conductivity in MOFs. Li-2-MDOBDC material showed excellent performance as a cathode material for lithium-ion batteries, with potential applications in energy storage and evaluation.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2021)
Article
Chemistry, Multidisciplinary
Zhongju Wang, Qianqian Fan, Wei Guo, Changchun Yang, Yongzhu Fu
Summary: The biredox-ionic composite EV-AQ(2) shows high initial capacity and improved cyclability as a cathode material for lithium-organic batteries, with promising potential for developing high-energy-density rechargeable batteries.
Article
Chemistry, Physical
Qing Cheng, Peng Chen, Xiaohong Liu, Yanping Wang, Jianxun Zhao, Heng Liu, Lianshan Sun, Xinwei Wang, Wanqiang Liu, Yong Cheng
Summary: A coaxial electrospinning process was used to prepare CoSe2/CTs material with hollow tubular structures for the cathode of Li-S battery. The material showed superior performance in tolerating sulfur volume expansion/contraction and enhancing the reaction kinetics in the battery. The method provides a significant strategy for preparing Co-based cathodes and improving the performance of Li-S batteries.
JOURNAL OF ALLOYS AND COMPOUNDS
(2024)
Review
Chemistry, Physical
Zhaojin Li, Jinxing Yang, Tianjia Guang, Bingbing Fan, Kongjun Zhu, Xiaohui Wang
Summary: This paper summarizes the recent progress in controlled hydrothermal/solvothermal synthesis of LiFePO4 and explores the relationship between the synthesis conditions and the nucleation-and-growth of LiFePO4. The review covers surface decoration, lattice substitution, and defect control, while also discussing new research directions and future trends in the field.
Review
Chemistry, Applied
Yuqing Wang, Ning An, Lei Wen, Lei Wang, Xiaotong Jiang, Feng Hou, Yuxin Yin, Ji Liang
Summary: This review comprehensively summarizes the recycling technologies for LiNixCoyMnzO2 and LiFePO4-based LIBs, as well as exhausted anode materials, and discusses the challenges and possible strategies for industrial-scale application. The closed-loop strategy for cycling cathode materials is highlighted as an ideal approach for its economic benefit and environmental friendliness.
JOURNAL OF ENERGY CHEMISTRY
(2021)
Article
Chemistry, Physical
Wending Pan, Yulong Zhang, Kee Wah Leong, Yingguang Zhang, Jianjun Mao, Yifei Wang, Xiaolong Zhao, Shijing Luo, D. Y. C. Leung
Summary: This study introduces 2D MoS2 as a high-performance cathode material for aqueous Al-ion batteries, achieving high voltage and energy density through anion intercalation mechanism. The battery demonstrated an impressive retention rate of approximately 100% after 200 cycles. This research not only provides insights into the development of 2D MoS2 cathode materials but also lays the foundation for advanced cathode materials in the field of Al-ion batteries.
Article
Energy & Fuels
Ewelina Rudnicka, Pawel Jakobczyk, Andrzej Lewandowski
Summary: In this study, the capacity of graphene|electrolyte|Li laboratory cell was tested at different currents. The impedance of the Li4Ti5O12|electrolyte|Li laboratory and commercial Li-ion cells was also measured. The research discusses various factors that affect Li-ion batteries, such as cathode and anode material capacity, battery polarization, heat dissipation, volume changes, capacity under non-equilibrium conditions, pseudocapacitive behavior, and battery safety. The results show that battery capacity may vary with current and polarization, and the measurement process may affect the determined capacity value.
JOURNAL OF ENERGY STORAGE
(2022)
Article
Chemistry, Multidisciplinary
Qinong Shao, Panyu Gao, Chenhui Yan, Mingxi Gao, Wubin Du, Jian Chen, Yaxiong Yang, Jiantuo Gan, Zhijun Wu, Chenyang Zhang, Gairong Chen, Xusheng Zheng, Yue Lin, Yinzhu Jiang, Wenping Sun, Yongfeng Liu, Mingxia Gao, Hongge Pan
Summary: Introducing an additional redox couple in Li- and Mn-rich layered oxides cathode significantly enhances cycling stability and inhibits oxygen release, with S2- ions playing a crucial role in stabilizing the oxygen lattice. The findings suggest a potential direction to improve the cycling stability of high-energy anion-redox cathode materials for rechargeable metal-ion batteries.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Qiang Pang, Xiangyu Yu, Shijing Zhang, Wei He, Siyu Yang, Yao Fu, Ying Tian, Mingming Xing, Xixian Luo
Summary: The study fabricated an aqueous Zn2+/Li+ hybrid-ion battery using LiV3O8 nanorods as cathode, metallic Zn as anode, and 3M Zn(OTf)(2) + 0.5M LiOTf aqueous solution as electrolyte. The hybrid-ion battery showed significantly improved cycle performance compared to batteries using pure 3M Zn(OTf)(2) electrolyte, with an impressive capacity retention of 87.0% after 4000 cycles at 5A g(1), due to the inhibitory effect of the hybrid electrolyte on the formation of irreversible by-products and Zn dendrite growth.
Editorial Material
Materials Science, Multidisciplinary
Sheng Shui Zhang
Summary: Fast charging of Li-ion cells faces challenges including accelerated capacity fade and inferior charging capability. Apart from the well-known issues of Li plating and voltage polarization, there are hidden factors such as failure of the solid electrolyte interphase, structural degradation of cathode materials, and high activation energies of Li+ ions in the electrolyte. Understanding these factors can help propose solutions to the fast-charging problems.
ENERGY & ENVIRONMENTAL MATERIALS
(2022)
Article
Chemistry, Physical
Anand Rajkamal, Hern Kim
Summary: The higher Ni content with less cobalt usage in lithium nickel cobalt manganese oxide cathode materials results in higher power rating and energy density in lithium-ion batteries. Cation doping effectively suppresses the mixing of Ni ions in the lithium layer. Different cationic dopants have varying effects on the structural stability and performance of the cathode material.
ACS APPLIED ENERGY MATERIALS
(2021)
Article
Engineering, Environmental
Fei Zhang, Miaomiao Wu, Xingchao Wang, Qian Xiang, Yan Wu, Juan Ding, Ying Sun
Summary: This study reports a novel organic electrode material, hexalithium salt of mellitic acid (Li6C12O12), which shows promising characteristics including low cost, high capacity, non-toxicity, and environmental friendliness for lithium-ion batteries (LIB) and dual-ion batteries (DIB). The electrochemical and spectroscopic analysis confirmed a reversible coordination reaction mechanism based on carboxylic carbonyl and Li+ ions. Li6C12O12 achieved large reversible capacities of 730 mA h g(-1) at 0.21 A/g and 372 mA h g(-1) even at 2 A/g. Moreover, Li6C12O12 electrode exhibited excellent performance in full LIB and DIB, showing high capacity and cycling stability. This work provides a new perspective on designing and tailoring organic electrode materials for high-performance lithium-ion batteries and dual-ion batteries.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Chemistry, Physical
Xi Chen, Laura C. Loaiza, Laure Monconduit, Vincent Seznec
Summary: The 2D Si-Ge alloy materials, known as siliganes, have been developed for use as anodes in Li-ion batteries, offering reasonable cost and promising electrochemical performance. Among them, the siligane_Si0.9Ge0.1 showed the best performance, with a reversible capacity of 1325 mA h g-1, high capacity retention, and coulombic efficiency at a current density of 0.05 A g-1 after 10 cycles.
ACS APPLIED ENERGY MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Tong-Tong Zuo, Felix Walther, Jun Hao Teo, Raffael Ruess, Yubo Wang, Marcus Rohnke, Daniel Schroeder, Linda F. Nazar, Juergen Janek
Summary: Lithium argyrodite-type electrolytes are promising due to their high ionic conductivity and processability. The influence of halogenation on electrochemical decomposition and chemical degradation mechanism at the cathode interface is investigated. The results show that halogenation leads to increased electrochemical decomposition, more gaseous degradation products, and a decreased interfacial resistance, resulting in higher cell performance.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2023)
Article
Chemistry, Multidisciplinary
Chun Yuen Kwok, Shiqi Xu, Ivan Kochetkov, Laidong Zhou, Linda F. F. Nazar
Summary: A Li2S/LiVS2 core-shell cathode architecture design is reported for all-solid-state Li-S batteries, which improves the kinetics of Li2S cathode by using the shell as a charge-carrier transport vehicle and electron transfer mediator. The solid-state Li2S cell exhibits good rate capability and capacity retention at room temperature, and high active material loading is demonstrated with stable capacity retention. However, the cycle life is limited under high active material loading.
ENERGY & ENVIRONMENTAL SCIENCE
(2023)
Article
Electrochemistry
Zoya Sadighi, Jeffrey S. S. Price, Jingyi Qu, David J. H. Emslie, Gianluigi A. A. Botton, Gillian R. R. Goward
Summary: Understanding the capacity delivery mechanism in conversion/alloying materials (CAM) electrodes, such as ZnO, in lithium-ion batteries requires investigating the electrochemical reactions. Magic angle spinning (MAS) Li-7 nuclear magnetic resonance (NMR) is used to probe the reactions between electrode materials and Li+ ions. The study reveals the formation of LixZn alloy during discharge and the dealloying of LixZn at full charge, resulting in atomic zinc nanograins. In situ formation of elemental zinc promotes uniform lithium deposition on subsequent cycles.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
(2023)
Article
Nanoscience & Nanotechnology
Erika P. P. Ramos, Abdeljalil Assoud, Laidong Zhou, Abhinandan Shyamsunder, Daniel Rettenwander, Linda F. F. Nazar
Summary: We have reported a new ion conductor, Na11Sn2SbSe12, which could be a possible candidate for a solid catholyte in composite cathodes for all-solid state Na-batteries. It possesses a room temperature ionic conductivity of 0.15 ± 0.03 mS cm(-1) and an activation energy of 0.39 ± 0.02 eV. Through a combination of Rietveld refinement and electrochemical impedance spectroscopy, we have investigated the sulfide solid solutions, Na11Sn2SbS12-xSex (x = 1 and 6), to understand the structure-property relationships governing ion transport in these materials.
Article
Chemistry, Multidisciplinary
Laidong Zhou, J. David Bazak, Baltej Singh, Chang Li, Abdeljalil Assoud, Nancy M. Washton, Vijayakumar Murugesan, Linda F. Nazar
Summary: We have discovered a new fast-ion conductor, Na3B5S9, that exhibits a high Na ion total conductivity of 0.80 mS cm(-1) (sintered pellet; cold-pressed pellet=0.21 mS cm(-1)). This material has a unique structure consisting of corner-sharing B10S20 supertetrahedral clusters that create a framework supporting 3D Na ion diffusion channels. The study reveals the importance of a disordered Na ion sublattice and well-connected Na ion migration pathways in dictating Na ion diffusion.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2023)
Article
Multidisciplinary Sciences
Chang Li, Ryan Kingsbury, Arashdeep Singh Thind, Abhinandan Shyamsunder, Timothy T. Fister, Robert F. Klie, Kristin A. Persson, Linda F. Nazar
Summary: The authors report a eutectic electrolyte that enables selective Zn2+ intercalation at the cathode and highly reversible Zn metal plating/stripping at the anode, resulting in a high-capacity Zn anode-free cell. By suppressing proton co-intercalation and dendrite growth, the authors achieve a benchmark performance in aqueous Zn-metal batteries, with high coulombic efficiency and long cycle life.
NATURE COMMUNICATIONS
(2023)
Article
Chemistry, Physical
Laidong Zhou, Tongtong Zuo, Chang Li, Qiang Zhang, Jurgen Janek, Linda F. F. Nazar
Summary: We report two new families of lithium metal chloride solid electrolytes, Li(3-x)Zr(x)(M)(1-x)Cl-6 (0≤x≤0.8; M = Ho or Lu), with high ionic conductivities of up to 1.8 mS cm(-1) and a low activation energy of 0.34 eV. Structural elucidation reveals the Li ion distribution in three different compounds. All-solid-state batteries with Li2.6Zr0.4(Ho/Lu)0.6Cl-6 solid electrolytes and NCM85 cathodes show stable cycling up to 4.6 V, with stable cathode interphases formed.
ACS ENERGY LETTERS
(2023)
Article
Nanoscience & Nanotechnology
Abhinandan Shyamsunder, Max Palmer, Ivan R. Kochetkov, Jeff S. Sakamoto, Linda F. Nazar
Summary: Conventional Li-S batteries rely on liquid electrolytes, while new electron pair donor (EPD) solvents provide higher sulfur solubility and better sulfur utilization. However, their instability requires the use of an ion-conductive membrane. This study found that even trace amounts of LiOH on the LLTZO surface react with sulfur in EPD solvents, leading to the formation of a resistive layer that impedes Li+ transport. However, modifying the LLZO surface with protective phosphate groups reduces charge-transfer resistance and inhibits the reaction between LiOH and sulfur. The electrolyte cells constructed based on this concept exhibit high sulfur utilization and good stability.
ACS APPLIED MATERIALS & INTERFACES
(2023)
Article
Chemistry, Inorganic & Nuclear
Sergei Novikov, Christopher J. Franko, Mengyang Cui, Zan Yang, Gillian R. Goward, Yurij Mozharivskyj
Summary: The structure of a Na4Sn2Ge5O16 phase and its potential for Na+ ionic conductivity were studied. Substituting Sn4+ with Sb5+ was found to increase Na+ mobility. The highest ionic conductivity was achieved in the Na3.8Sn1.8Sb0.2Ge5O16 sample. Solid-state nuclear magnetic resonance revealed faster Na site exchange in the doped sample.
INORGANIC CHEMISTRY
(2023)
Editorial Material
Chemistry, Physical
Anastassia N. Alexandrova, Julie S. Biteen, Sonia Coriani, Franz M. Geiger, Andrew A. Gewirth, Gillian R. Goward, Hua Guo, Libai Huang, Jian-Feng Li, Tim Liedl, Stephan Link, Zhi-Pan Liu, Sudipta Maiti, Andrew J. Orr-Ewing, David L. Osborn, Jim Pfaendtner, Benoit Roux, Friederike Schmid, J. R. Schmidt, William F. Schneider, Lyudmila V. Slipchenko, Gemma C. Solomon, Jeroen A. van Bokhoven, Veronique Van Speybroeck, Shen Ye, T. Daniel Crawford, Martin T. Zanni, Gregory V. Hartland, Joan-Emma Shea
JOURNAL OF PHYSICAL CHEMISTRY A
(2023)
Editorial Material
Chemistry, Physical
Anastassia N. Alexandrova, Julie S. Biteen, Sonia Coriani, Franz M. Geiger, Andrew A. Gewirth, Gillian R. Goward, Hua Guo, Libai Huang, Jian-Feng Li, Tim Liedl, Stephan Link, Zhi-Pan Liu, Sudipta Maiti, Andrew J. Orr-Ewing, David L. Osborn, Jim Pfaendtner, Benoit Roux, Friederike Schmid, J. R. Schmidt, William F. Schneider, Lyudmila V. Slipchenko, Gemma C. Solomon, Jeroen A. van Bokhoven, Veronique Van Speybroeck, Shen Ye, T. Daniel Crawford, Martin T. Zanni, Gregory V. Hartland, Joan-Emma Shea
JOURNAL OF PHYSICAL CHEMISTRY B
(2023)
Editorial Material
Chemistry, Physical
Anastassia N. Alexandrova, Julie S. Biteen, Sonia Coriani, Franz M. Geiger, Andrew A. Gewirth, Gillian R. Goward, Hua Guo, Libai Huang, Jian-Feng Li, Tim Liedl, Stephan Link, Zhi-Pan Liu, Sudipta Maiti, Andrew J. Orr-Ewing, David L. Osborn, Jim Pfaendtner, Benoit Roux, Friederike Schmid, J. R. Schmidt, William F. Schneider, Lyudmila V. Slipchenko, Gemma C. Solomon, Jeroen A. van Bokhoven, Veronique Van Speybroeck, Shen Ye, T. Daniel Crawford, Martin T. Zanni, Gregory V. Hartland, Joan-Emma Shea
JOURNAL OF PHYSICAL CHEMISTRY C
(2023)
Article
Chemistry, Multidisciplinary
Kevin J. Sanders, Amanda A. Ciezki, Alexander Berno, Ion C. Halalay, Gillian R. Goward
Summary: Nuclear magnetic resonance (NMR) spectroscopy is used to track lithium speciation inside a battery and quantify their amounts. Research on Si electrodes reveals that LixSi compounds formed during cycling exhibit nonequilibrium behavior and dendritic Li is irreversible.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2023)
Article
Chemistry, Physical
Yangyang Huang, Laidong Zhou, Chang Li, Zhuo Yu, Linda F. Nazar
Summary: A simple organic coating concept utilizing a nanometric layer of waxy soap has been reported to stabilize argyrodite material and suppress its oxidative degradation at high voltage, achieving good cycling stability and capacity retention.
ACS ENERGY LETTERS
(2023)
Article
Chemistry, Multidisciplinary
Chang Li, Rishabh D. Guha, Abhinandan Shyamsunder, Kristin A. Persson, Linda F. Nazar
Summary: We report a solvent-designed Mg(TFSI)2 electrolyte that facilitates ion pair dissociation, nanoscale Mg nucleation/growth, and dendrite-free Mg plating/stripping at 2 mA h cm-2, enabling full cell operation up to 3.5 V at a 2C rate for 400 cycles.
ENERGY & ENVIRONMENTAL SCIENCE
(2023)