Article
Engineering, Environmental
Binbin Fu, Litao Geng, Guangchao Jia, Zhilong Yuan, Peitao Zhao, Rongyang Zhao, Cuiping Wang, Jiaming Li
Summary: Plastic waste has grown significantly in recent years, causing a global environmental issue known as white pollution. However, plastic waste also contains valuable carbon and hydrogen content, which can be converted into high-quality oil using supercritical methanol. The experiment showed that increasing temperature and reaction time promoted the conversion of polypropylene (PP), resulting in a higher oil yield. The oil obtained primarily consisted of hydrocarbons and oxygenates, and the composition varied more significantly with temperature rather than reaction time. The study concluded that supercritical methanol is a feasible solvent for converting plastic waste into high-quality oil, offering a potential solution to plastic pollution.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING
(2023)
Article
Materials Science, Multidisciplinary
Biaobing Chen, Min Liu, Shuang Cao, Gairong Chen, Xiaowei Guo, Xianyou Wang
Summary: This paper presents a new method for recovering FePO4 and Li2CO3 from spent LiFePO4 cathode materials to address the shortage of lithium resources. It was found that a sample with 12% carbon content in the LiFePO4 composite demonstrated better electrochemical performance.
MATERIALS CHEMISTRY AND PHYSICS
(2022)
Article
Thermodynamics
M. Monge-Palacios, E. Grajales-Gonzalez, S. Mani Sarathy
Summary: This study conducted the first molecular dynamics study of the oxidation of methanol in four supercritical environments, revealing changes in the oxidation chemistry when supercritical CO2 and/or H2O are present. The collision analysis showed that collisions with H2O can efficiently activate methanol for dissociation events. The findings contribute to the development of kinetic models for methanol oxidation/pyrolysis and the implementation of oxy-combustion and hydrothermal combustion techniques.
Article
Energy & Fuels
Ricardo Garcia-Morales, Abel Zunigo-Moreno, Francisco J. Veronico-Sanchez, Jose Domenzain-Gonzalez, Hugo I. Perez-Lopez, Christian Bouchot, Octavio Elizalde-Solis
Summary: The aim of this study was to synthesize fatty acid methyl esters from waste beef tallow using one-step supercritical methanol transesterification without pre-treatment. Animal waste samples were collected from local markets and experiments were conducted in a batch reactor made of Inconel 625 alloy. Various parameters such as methanol:waste beef tallow molar ratio, temperature, and pressure were investigated to obtain the fatty acid methyl esters, which were then characterized and the overall yield was calculated.
Article
Chemistry, Physical
Alireza Rahbari, Alec Shirazi, John Pye
Summary: Research on methanol synthesis through solar-thermal supercritical water gasification (SCWG) shows that steam methane reforming (SMR) with CO2 dumping can achieve a lower production cost, but the lowest-cost reforming option may change if the cost of renewable H-2 decreases.
SUSTAINABLE ENERGY & FUELS
(2021)
Article
Chemistry, Applied
Xiangchen Kong, Chao Liu, Weicong Xu, Yue Han, Yuyang Fan, Ming Lei, Ming Li, Rui Xiao
Summary: This study investigates the depolymerization of stubborn lignin (SL) using Cu/CuMgAlOx catalyst in supercritical methanol, achieving a monomer yield of 37.76% with cyclohexanols identified as the major products. Various analytical techniques confirm the depolymerization of SL and upgrading of its derivatives. Computational determinations of activation energies, chemisorption energies, and bond dissociation energies support the experimental results, providing insights into the cleavage of stubborn linkages within SL.
FUEL PROCESSING TECHNOLOGY
(2021)
Article
Chemistry, Physical
Xuyan Liu, Ruipeng Zhao, Yijie Xia, Qiang Li
Summary: LFP/C composites prepared through carbothermic reduction process show enhanced electrochemical performance with increasing carbon content. LFP/C-15 exhibits the highest initial discharge specific capacity and superior capacity retention rate, close to the theoretical specific capacity.
Article
Chemistry, Physical
Giyoung Hong, Kyungho Song, Youn-Woo Lee
Summary: The waste artificial marble powder (AMP) composed of PMMA and ATH was recycled using supercritical fluids, showing that higher temperatures are required for PMMA depolymerization in AMP due to the presence of ATH. The transformation of ATH to alumina influences the yield of MMA, with supercritical methanol yielding the highest MMA production. The reaction conditions also affect the products obtained, with MMA as the major product in supercritical methanol and methacrylic acid as the main product in sub- and supercritical water.
JOURNAL OF SUPERCRITICAL FLUIDS
(2021)
Article
Engineering, Chemical
Guoxing Li, Youjun Lu, Peter Glarborg
Summary: This paper investigated the oxidation kinetics of methane and methane/methanol mixtures in supercritical water and established a detailed chemical kinetic model. The results showed that oxidation reactions in supercritical water have different characteristics compared to the gas phase. The addition of methanol promoted the oxidation of methane, while supercritical water facilitated the oxidation process by enhancing the production of reactive radicals.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
(2022)
Article
Chemistry, Physical
Jian Lan, Hongying Hou, Baoxiang Huang, Hao Li, Junkai Li
Summary: The research investigates the extraction of LFP/C material from wastes and the positive role of vitamin C. The results show that vitamin C can improve the electronic conductivity and Li-storage performances of LFP/C cathode. This is an important method to reduce waste accumulation and promote the development of a circular economy mode.
Article
Environmental Sciences
Retno Purbowati, Titik Taufikurohmah, Achmad Syahrani
Summary: The green extraction of SCFE-CO2 with co-solvent methanol can produce a more complete phenolic acid composition and a higher quantity, without toxicity. The extraction process involves using 100 g of Quercus infectoria gall of size 0.3 mm, with a temperature of 60 & DEG;C, pressure of 20 MPa, and a co-solvent methanol flow rate varying from 0.05 to 6 ml/min for 60 min. The analysis showed that this method can identify about 27 phenolic compounds, and the flow rate of methanol co-solvent significantly affects the extraction outcome up to a flow rate of 0.5 ml/min, with no further impact beyond that.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
(2023)
Article
Chemistry, Physical
Yuhang Yang, Liang Zhao, Jun Zhang
Summary: The catalytic gasification of methanol by transition metal chlorides in supercritical water was studied. The addition of transition metal chlorides significantly improved the hydrogen yield and gasification efficiency, while water molecules decreased the energy barriers of methanol decomposition pathways and different transition metal cations promoted methanol decomposition by forming coordinate bond force with hydroxy group oxygen atom.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
(2023)
Article
Energy & Fuels
Guoxing Li, Youjun Lu, Hamid Hashemi, Peter Glarborg
Summary: A detailed chemical kinetic model was developed for high-pressure methanol oxidation in the gas phase and supercritical water, with updated kinetic parameters for key reactions. The model was validated against experimental data and showed good agreement overall, with discrepancies attributed to experimental artifacts. A comparative kinetic analysis explored the characteristic similarities and differences of methanol oxidation under the two conditions.
Article
Chemistry, Multidisciplinary
Aleksei V. Kubarkov, Alexander V. Babkin, Oleg A. Drozhzhin, Keith J. Stevenson, Evgeny V. Antipov, Vladimir G. Sergeyev
Summary: In this study, a combination of LiFePO4 active material with single-walled carbon nanotubes as conductive additive was used to develop high-energy-density cathodes for Li-ion batteries. The effect of different morphologies of the active material particles on the electrochemical characteristics of the cathodes was investigated. Spherical LiFePO4 microparticles provided higher packing density but had poorer contact with the current collector and lower rate capability compared to plate-shaped LiFePO4 nanoparticles.
Article
Forestry
Yao Yilin, Eiji Minami, Haruo Kawamoto
Summary: This study investigates the effect of pressure on the decomposition of Japanese cedar in supercritical methanol and finds that higher pressure leads to better delignification and higher coniferyl alcohol and sugar yields. The ability of methanol to dissolve lignin-derived oligomers at high pressure and the rapid dissolution and recovery of products from cell walls contribute to these findings. This study is significant for the industrial production of biochemicals using supercritical methanol.
JOURNAL OF WOOD SCIENCE
(2023)
Article
Engineering, Environmental
Xiaohui Zhang, Zhiwei Chen, Ying Luo, Xiaole Han, Qingqing Jiang, Tengfei Zhou, Haijian Yang, Juncheng Hu
Summary: The research team successfully designed a Z-scheme CdS/NH2-MIL-125(Ti) heterojunction photocatalyst, which can significantly enhance the hydrogen evolution rate and provide a new avenue for solar-driven energy conversion.
JOURNAL OF HAZARDOUS MATERIALS
(2021)
Article
Nanoscience & Nanotechnology
Cheng Huang, Sirong Zou, Ye Liu, Shilin Zhang, Qingqing Jiang, Tengfei Zhou, Sen Xin, Juncheng Hu
Summary: The study demonstrates the synthesis of surface-amorphized bismuth oxychloride through a rapid precipitation strategy and reveals its excellent photocatalytic water oxidation performance compared to its crystallized counterpart.
ACS APPLIED MATERIALS & INTERFACES
(2021)
Article
Chemistry, Physical
Qingqing Jiang, Lin Wang, Junning Chen, Zhengxi Huang, Hai-Jian Yang, Tengfei Zhou, Juncheng Hu
Summary: Coating MoS2 nanosheets on porous carbon polyhedrons derived from zeolite imidazole framework-8 as anode materials for potassium-ion batteries results in excellent electrochemical performance due to unique hybrid structures and synergistic effects between MoS2 and N-doped carbon polyhedron, enhancing electronic conductivity, shortening potassium-ion diffusion distance, relieving MoS2 nanosheet agglomeration, mitigating volume variation, and providing numerous active sites for potassium ion accommodation.
JOURNAL OF ALLOYS AND COMPOUNDS
(2021)
Article
Chemistry, Physical
Qingqing Jiang, Lin Wang, Yan Wang, Meihua Qin, Rui Wu, Zhengxi Huang, Hai-Jian Yang, Yongxiu Li, Tengfei Zhou, Juncheng Hu
Summary: In this study, MoSe2 nanosheets were fabricated on N-doped porous carbon polyhedron (NPCP) to serve as novel anode materials for potassium-ion batteries (PIBs). The hybrid structure of NPCP@MoSe2 exhibited enhanced electrochemical performance with high specific capacity, good cycling stability, and outstanding rate capability.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2021)
Article
Chemistry, Physical
Lin Wang, Qingqing Jiang, Kun Yang, Yifan Sun, Tengfei Zhou, Zhengxi Huang, Hai-Jian Yang, Juncheng Hu
Summary: This study utilized an MOF-derived carbon structure and the self-assembly of CNTs on hollow carbon polyhedrons to disperse and stabilize metal selenides as anode materials for potassium-ion batteries, achieving long-term cycling stability by suppressing the agglomeration of the metal selenide nanoparticles and maintaining structural integrity.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2021)
Article
Chemistry, Physical
Shuoping Ding, Tianao Dong, Tim Peppel, Norbert Steinfeldt, Juncheng Hu, Jennifer Strunk
Summary: Porous hierarchical microspheres composed of amorphous SiO2 and crystalline beta-Bi2O3 were synthesized via a solvothermal process and subsequent calcination, with amorphous SiO2 contributing to enhanced thermostability of beta-Bi2O3. Photocatalytic activity of the synthesized samples was found to be significantly influenced by phase composition and morphology, with samples containing highly crystalline beta-Bi2O3 phase exhibiting optimal performance in tetracycline hydrochloride degradation under visible light irradiation at low catalyst dosage. The synergistic effect of porous structure, light absorption capability, and charge carrier separation efficiency were identified as key factors contributing to the samples' photocatalytic activity.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2022)
Article
Chemistry, Multidisciplinary
Ying Luo, Xiaohui Zhang, Cheng Huang, Xiaole Han, Qingqing Jiang, Tengfei Zhou, Haijian Yang, Juncheng Hu
Summary: The Ni-doped Zn0.8Cd0.2S hollow sphere photocatalyst achieved goals of promoting charge separation, increasing surface active sites, and enhancing photocatalytic activity. Ni doping reduced the band structure of the substrate, suppressed the recombination of photoinduced electrons and holes, and provided more reactive sites. The significant increase in photocatalytic H-2 evolution rate demonstrated the success of the Ni-doped ZnxCd1-xS for improved stability.
Article
Chemistry, Physical
Haizhao Zheng, Zhiwei Chen, Cheng Huang, Linlin Gao, Tianao Dong, Juncheng Hu
Summary: The CdS/ZIF-8 heterojunction system was successfully fabricated through a facile wet-chemically method, showing significantly enhanced interfacial charge separation and superior photocatalytic hydrogen production performance compared to pristine CdS, offering new insights for novel photocatalyst development.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2022)
Article
Chemistry, Multidisciplinary
L. Gao, Z. Chen, H. Zheng, J. Hu
Summary: Due to the release of antibiotics into the environment, it is urgent to find effective methods for treating antibiotic-containing wastewater. Photocatalytic technology, which can generate reactive oxygen species, shows promise for water purification and environmental remediation. In this study, a spindle-like hollow CdIn2S4 photocatalytic system was developed for efficient tetracycline removal. The hollow structure improved light absorption and carriers separation, resulting in a degradation efficiency of over 94.5% within 40 minutes under visible light. The degradation rate constant was four times higher than that of the pristine CdIn2S4. This work provides insights for the design of hollow catalysts in other environmental applications.
MATERIALS TODAY CHEMISTRY
(2022)
Article
Chemistry, Physical
Qin Wen, Xuexin Yuan, Qiqi Zhou, Hai-Jian Yang, Qingqing Jiang, Juncheng Hu, Cun-Yue Guo
Summary: A series of bifunctional Schiff base metal catalysts were synthesized for the coupling reactions of carbon dioxide and epoxides. The reaction variables were studied, and the optimal reaction conditions were determined. The performance of different metal-centered catalysts was evaluated, and a bifunctional catalyst with excellent activity and stability was identified. The kinetic study and proposed mechanism for the cyclization reaction were also provided.
Article
Chemistry, Physical
Qin Wen, Xuexin Yuan, Qiqi Zhou, Hai-Jian Yang, Qingqing Jiang, Juncheng Hu, Cun-Yue Guo
Summary: In this paper, a series of bifunctional metallic niobium complexes were synthesized for the coupling reaction of CO2 and epoxides. The catalysts showed high efficiency, selectivity, and substrate suitability, and could be easily recovered and reused. Kinetic studies and a possible reaction mechanism were also proposed to further understand the reaction.
Article
Chemistry, Multidisciplinary
Zijian Xin, Haizhao Zheng, Juncheng Hu
Summary: Photocatalysts derived from semiconductor heterojunctions, such as the Co3O4@ZIS p-n heterojunction created in this study, show great potential in solar energy conversion. The Co3O4 hollow structure enhances light absorption and utilization efficiency, while also preventing agglomeration of ZnIn2S4 nanosheets and improving hydrogen generation rate. The Co3O4(20) @ZIS heterojunction exhibits excellent photocatalytic activity, producing hydrogen at a rate seven times higher than pure ZnIn2S4 under simulated solar light. These hollow p-n heterojunctions have promising applications in solar energy conversion.
Article
Materials Science, Multidisciplinary
Xuejuan Huang, Pengcheng Wang, Qingqing Jiang, Juncheng Hu
Summary: A unique BiOCl double-shelled hollow microsphere structure with adjustable shell thickness was fabricated for the first time through a template-free one-pot solvothermal method. The photocatalyst exhibited excellent carbamazepine degradation efficiency under simulated solar irradiation, outperforming conventional BiOCl solid microspheres. The presence of nanosheet subunits and porous structures shortened the diffusion length of charge carriers, facilitating the separation and transfer of photogenerated species. The double-shelled hollow structure also achieved higher light utilization.
MATERIALS TODAY COMMUNICATIONS
(2023)
Article
Chemistry, Physical
Shuoping Ding, Igor Medic, Norbert Steinfeldt, Tianao Dong, Tim Voelzer, Simon Haida, Jabor Rabeah, Juncheng Hu, Jennifer Strunk
Summary: Constructing hierarchical and ultrathin-structured metal sulfides is beneficial for efficient hydrogen evolution catalysts. In this study, ZnIn2S4 hollow nanoflowers composed of ultrathin nanosheets were creatively synthesized through a trisodium citrate-mediated and stirring-assisted solvothermal method. The optimized ZnIn2S4 hollow nanoflowers exhibited a high photocatalytic hydrogen generation rate and can be obtained without the need for a cocatalyst.
Article
Chemistry, Multidisciplinary
Qingqing Jiang, Weifang Zhao, Xinyue Xu, Da Ke, Ran Ren, Fuzhen Zhao, Shilin Zhang, Tengfei Zhou, Juncheng Hu
Summary: In this study, carbon-coated MoSe2 decorated Mo(2)CTx MXene heterostructures were fabricated, which exhibited high reversible capacities in potassium-ion batteries.
CHEMICAL COMMUNICATIONS
(2023)
Article
Chemistry, Physical
Qi-Wen Chen, Ze-Qing Guo, Jian-Ping Zhou
Summary: Multifunctional continuous solid solutions NFMTO-x were successfully synthesized via a one-step hydrothermal method by controlling the ratio of Mg and Fe. The NFMTO-x materials exhibited enhanced visible light response, effective adsorption and photocatalytic degradation of organic pollutants, CO2 methanation capability, and easy recyclability due to their magnetic properties. This research provides a significant multifunctional material for water purification.
APPLIED SURFACE SCIENCE
(2024)
Review
Chemistry, Physical
George E. Stan, Maziar Montazerian, Adam Shearer, Bryan W. Stuart, Francesco Baino, John C. Mauro, Jose M. F. Ferreira
Summary: Bioactive glasses have the ability to form strong bonds with tissues and release therapeutic ions. However, their biomechanical compatibility limits their use in load-bearing applications. The use of magnetron sputtering technology to fabricate BG coatings shows promise in improving their efficacy and potential for application.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Zhaoxuan Wang, Zhicheng Yan, Zhigang Qi, Yu Feng, Qi Chen, Ziqi Song, Meng Huang, Peng Jia, Ki Buem Kim, Weimin Wang
Summary: The corrosion behavior of Fe-60 and Fe-83 ribbons in 0.6 M NaCl was studied. Fe-60 exhibited a local corrosion mode and formed a stable passivation film with higher corrosion resistance, while Fe-83 showed a combination of local and global corrosion modes and had lower corrosion resistance. Controlling the precipitation of nanocrystalline phases and increasing the POx content in the passivation film significantly improved the corrosion resistance of Fe-based glassy alloys.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Hao-Kai Peng, Sheng-Yen Zheng, Wei-Ning Kao, Ting-Chieh Lai, Kai-Sheun Lee, Yung- Hsien Wu
Summary: This study investigates the effects of high energy/fluence proton radiation on the performance of HfZrOx-based FeFETs memory with different Zr content. The results show that the characteristics of FeFETs are influenced by proton radiation, and the extent of the influence depends on the Zr content. FeFETs with 50% Zr content exhibit minimal changes in memory window and demonstrate good endurance and retention performance.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Zongyi Yue, Guangyi Wang, Zengguang Huang, Sihua Zhong
Summary: In this study, AZO and ITO films were successfully tuned as excellent passivation layers for c-Si surfaces, achieving effective minority carrier lifetime and outstanding optical properties through the optimization of annealing temperature and interfacial silicon oxide.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Martin Hruska, Jan Kejzlar, Jaroslav Otta, Premysl Fitl, Michal Novotny, Jakub Cizek, Oksana Melikhova, Matej Micusik, Peter Machata, Martin Vrnata
Summary: This paper presents a detailed study on the hydrogen sensing capabilities of highly nanoporous black gold films. The films exhibit fast response and recovery times at low temperatures. Different levels of nanoporosity were prepared and tested to investigate the sensing properties, and it was found that nanoporous black gold is suitable for hydrogen sensing. The sensitivity of the film depends on its nanoporosity.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Yupu Wang, Gaofeng Teng, Chun To Yiu, Junyi Zhu
Summary: In the study of BM-SCO and HSCO thin films, it was found that H vacancies tend to prefer sites near the external surface or oxygen vacancy channels (OVCs), while H interstitials prefer sites of oxygen on a layer that contains six-fold coordinated Co. These findings not only enrich the understanding of complex surface phenomena of defect formation but also provide an explanation for the reversibility during phase transformation.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Jiafeng Lu, Linping Teng, Qinxiao Zhai, Chunhua Wang, Matthieu Lancry, Ye Dai, Xianglong Zeng
Summary: In this study, we achieved full control of fiber nanograting orientation by manipulating laser polarization, and tailored space variant fiber nanogratings, which expanded the diversity in fiber nanograting engineering.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Yibo Liu, Yujie Tao, Yue Liu, Qi Sun, Qinrong Lin, Kexin Kang, Qinghua Zhang, Qingjie Sun
Summary: This study investigates the wettability of the Ti-Cu-Fe multi-metal system, specifically the wetting behaviors of CuSi3 droplets on TC4 and 304SS plates. The results show that the CO2 + Ar gas atmosphere significantly affects interfacial mass transfer, thus influencing the wettability of the systems.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Jimei Liu, Fei Wang, Rong Guo, Yuqi Liu, Mengyu Zhang, Jaka Sunarso, Dong Liu
Summary: This study developed Co/MXene composites with anti-corrosion properties by varying the cobalt content. These composites exhibited remarkable electromagnetic absorption performance and high resistance to corrosion under various corrosive conditions. The study also revealed the mechanism of electron transfer from cobalt to MXene and the electromagnetic dissipation behavior originated from polarization loss alone.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Moujie Huang, Yongsong Ma, Jingbo Yang, Lingyun Xu, Hangqi Yang, Miao Wang, Xin Ma, Xin Xia, Junhao Yang, Deli Wang, Chuang Peng
Summary: Strong metal-support interactions (SMSIs) are important for enhancing catalytic activities and stability in thermal catalysis. This study demonstrates a method to create SMSIs in electrocatalysis using carbon nanotubes and Ru nanoparticles, resulting in excellent catalytic activity and stability.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Ravi Trivedi, Brinti Mondal, Nandini Garg, Brahmananda Chakraborty
Summary: This study explores the potential of biphenylene as a nanocarrier for the delivery of the anticancer drug cisplatin. It is found that biphenylene offers physical stability, rapid release rate, solubility, and bio-compatibilities compared to other nanocarriers. The adsorption of cisplatin on the surface of biphenylene involves charge transfer from cisplatin to biphenylene. The drug is shown to be released at body temperature in an acidic environment. Biphenylene also exhibits excellent cytotoxicity activity and cellular uptake of the drug. Overall, biphenylene shows promise as a potential nanocarrier for cisplatin delivery.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Hyun Jeong, Hyeong Chan Suh, Ga Hyun Cho, Rafael Salas-Montiel, Hayoung Ko, Ki Kang Kim, Mun Seok Jeong
Summary: In this study, a potential platform to enhance Raman scattering and increase the number of observable Raman modes in monolayer transition metal dichalcogenides (TMDs) was proposed. The platform consisted of large-scale arrays of gold micropillars (MPs), which were able to enhance the Raman intensity of TMDs and make difficult-to-detect Raman modes observable. The platform showed great industrial advantages and wide applicability due to its low cost, simple process, large controllable area, and short process time.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Yasir Abbas, Shafqat Ali, Sajjad Ali, Waqar Azeem, Zareen Zuhra, Haoliang Wang, Mohamed Bououdina, Zhenzhong Sun
Summary: In this study, FeOx@SPNO-C core-shell nanospheres as a catalyst for degradation of sulfamethoxazole (SMX) were successfully synthesized. The synergistic interaction between FeOx and SPNO-C, high carbon charge density, and the presence of C = O groups and N/Fe-Nx sites were found to be key factors for the enhanced degradation of SMX.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Qiaoting Yang, Yuxiao Gong, Yan Qian, Zhou-Qing Xiao, Serge Cosnier, Xue-Ji Zhang, Robert S. Marks, Dan Shan
Summary: This study proposes a hierarchical confinement strategy to design Prussian blue nanoparticles (PB NPs) with satisfactory electrocatalytic ability and stability. The catalytic synthesis of PB NPs is achieved through a hydrothermal process, and the as-prepared PB@NH2MIL exhibits efficient electronic transmission and enhanced electrocatalytic properties.
APPLIED SURFACE SCIENCE
(2024)