Article
Engineering, Environmental
Patricia Garcia-Munoz, Niels P. Zussblatt, Bradley F. Chmelka, Victor A. de la Pena O'Shea, Fernando Fresno
Summary: The photocatalytic activity of iron-grafted mesoporous Pt/TiO2 catalysts for hydrogen production from water-ethanol mixtures was investigated. Results showed that Fe is primarily located on the catalyst surfaces as Fe2O3 and does not dope the TiO2 structure. The catalyst with the lowest iron content exhibited the highest activity for ethanol dehydrogenation, attributed to the higher surface dispersion of Fe and efficient formation of a surface heterojunction between Fe2O3 and TiO2 that favors charge separation.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Multidisciplinary
Wenlong Sheng, Fengwei Huang, Xianjun Lang
Summary: In this study, a NH2-MIL-125(Ti)/amorphous TiO2 composite photocatalyst was synthesized by integrating amorphous TiO2 microspheres with a Ti-based MOF (NH2-MIL-125(Ti)) during hydrothermal process. The NH2-MIL-125(Ti)/amorphous TiO2 photocatalyst exhibited more than five times higher catalytic activity than pristine NH2-MIL-125(Ti) for the selective oxidation of benzylamine. Optical and electrochemical characterizations revealed that visible light absorption in NH2-MIL-125(Ti)/amorphous TiO2 originated from NH2-MIL-125(Ti), while faster electron transfer to molecular oxygen was attributed to amorphous TiO2. This study highlights the importance of integrating MOFs with metal oxides in enhancing visible light photocatalysis.
MATERIALS TODAY CHEMISTRY
(2023)
Article
Engineering, Environmental
Xueying Cheng, Renquan Guan, Yunning Chen, Yudan Qian, Qingkun Shang, Yingnan Sun
Summary: In this study, the adsorption and photocatalytic degradation of oxytetracycline (OTC) were investigated using different metal-doped TiO2 nanocatalysts (M-TiO2, M = Fe, Co, Ni, Cr). The effects of different metal dopants on the adsorption and degradation abilities of TiO2 were studied. The photocatalytic performance of Fe-TiO2 was found to be excellent due to the synergy between the separation ability of photogenerated carriers and the adsorption ability of pollutants.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Chemistry, Multidisciplinary
Huayu Yuan, Qi Su, Yuehu Wang, Jiang Li, Baojun Liu, Yancheng Li, Pan Wu
Summary: The study successfully degraded tetracycline using a nanosized mesoporous phosphated TiO2 photocatalyst, achieving rapid degradation of TC and COD removal. By utilizing response surface methodology and experimental data analysis, the optimal operating conditions for TC photocatalytic degradation were determined, demonstrating the significance and accuracy of the model. Additionally, GC-MS analysis was employed to identify TC degradation intermediates and propose a potential pathway for photodegradation.
Article
Engineering, Environmental
Qianqian Hu, Yifan Liu, Weian Li, Yanqi Wang, Wenhua Liao, Hanxun Zou, Jianrong Li, Xiaoying Huang
Summary: This study presents a facile and environmentally friendly method for synthesizing C, N co-doped mesoporous TiO2 nanocrystals, using IL-assisted microwave synthesis, resulting in small-sized TiO2 with well-developed mesoporous structure and abundant C, N dopants. The material exhibits high specific-surface area, excellent hydrophilicity, elevated valence-band edges, abundant defect levels, and narrowed band-gap, leading to improved visible-light absorption, reduced photogenerated electron-hole recombination, and rapid charge transfer and surface-catalyzed reactions.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Chemistry, Physical
Li-Yuan Zhang, Yan-Lin Han, Jin-Ju Yang, Sheng-Lian Deng, Bi-Yu Wang
Summary: Carbon quantum dots (CQDs) were prepared using citric acid as a carbon source, and then compounded with layered mesoporous titanium dioxide (LM-TiO2) to form composites. The addition of CQDs greatly enhanced the light absorption intensity of LM-TiO2 in the ultraviolet range and improved the degradation rate of organic pollutants compared to simple TiO2 and LM-TiO2.
APPLIED SURFACE SCIENCE
(2021)
Article
Chemistry, Physical
Congcong Wei, Wei Zhang, Xinpeng Wang, Aihong Li, Jianping Guo, Bo Liu
Summary: The g-C3N4/TiO2 photocatalysts with mesoporous structure and intimate interfacial connection were synthesized through facile pyrolysis, exhibiting significantly improved photocatalytic activity. The enhancement was primarily attributed to the synergistic effect between large specific surface area, decreased energy band gap, and intimate interface contact.
Article
Multidisciplinary Sciences
Yun Lu, Sujun Guan, Liang Hao, Hiroyuki Yoshida, Shohei Nakada, Taisei Takisawa, Takaomi Itoi
Summary: This article introduces a photocatalytic degradation method for novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). By coating the -TiO2/Ti photocatalyst coating, the spread of SARS-CoV-2 and influenza virus can be effectively inhibited, and harmful substances such as formaldehyde and acetaldehyde can be degraded.
SCIENTIFIC REPORTS
(2022)
Article
Chemistry, Physical
Congyu Wang, Zepeng Rao, Asad Mahmood, Xiao Wang, Yan Wang, Xiaofeng Xie, Jing Sun
Summary: A ternary heterogeneous photocatalyst g-C3N4/Ag-TiO2 was successfully fabricated for the photodegradation of gaseous acetaldehyde, showing 5.8 times higher photocatalytic activity compared to bare TiO2 and a 3.7 times increase in acetaldehyde mineralization efficiency. The improved performance of the ternary system is attributed to enhanced adsorption, light-harvesting capability, and charge separation process.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2021)
Article
Chemistry, Physical
Wang Ke, Xiangdong Qin, Robert M. Palomino, Juan Pablo Simonovis, Sanjaya D. Senanayake, Jose A. Rodriguez, Francisco Zaera
Summary: The redox properties of titania films grown by atomic layer deposition (ALD) on SBA-15 were investigated as a function of film thickness. Si-29 CP/MAS NMR and infrared absorption spectroscopy were used to determine the surface species formed during initial deposition and the transition from silica to titania surfaces. The reducibility of titania sites by CO and H-2 was studied ex situ using electron paramagnetic resonance (EPR) and in situ with ambient-pressure X-ray photoelectron spectroscopy (XPS). The results showed that the amorphous titania ALD films were more easily reduced and the reduction was reversible. The surface also exhibited a transition, with mixed Si-O-Ti sites forming in the early ALD cycles and a more typical titania surface developing as the film grew.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS
(2023)
Article
Chemistry, Applied
Ri Han, Rachel Andrews, Christopher O'Rourke, Stephanie Hodgen, Andrew Mills
Summary: The study examined the impact of photocatalytically generated surface HNO3 on NOx and VOC removal activity using different photocatalytic films, showing varied performance. The STO paint and P25 films exhibited decreased activity after irradiation, while the IKEA fabric retained its activity due to its fibrous nature. The presence of a HNO3 film had a negative effect on NOx removal activity, but did not significantly affect the oxidation activity of acetaldehyde.
Article
Nanoscience & Nanotechnology
Asad Mahmood, Xiao Wang, Xiaofeng Xie, Jing Sun
Summary: The study focused on developing atomically dispersed metal catalysts (ADMCs) for the photocatalytic degradation of acetaldehyde. Pt/T xh on TiO2 nanosheets showed higher photodegradation efficiency compared to pure TiO2 for acetaldehyde and CO oxidation. Kinetic models were used to analyze the reaction rates and adsorption constants of Pt/T 4h, showcasing its robust and efficient removal of acetaldehyde from indoor atmosphere.
ACS APPLIED NANO MATERIALS
(2021)
Article
Chemistry, Physical
Beata Tryba, Piotr Miadlicki, Piotr Rychtowski, Maciej Trzeciak, Rafal Jan Wrobel
Summary: Acetaldehyde decomposition was studied on TiO2 doped with metallic Ni powder and TiO2 supported on nickel foam under heating at temperatures of 25-125 °C and UV irradiation. The highest conversion of acetaldehyde on TiO2 and UV irradiation was achieved at 75 °C. Doping Ni to TiO2 did not enhance its photocatalytic activity, but using nickel foam as a support greatly improved the decomposition of acetaldehyde and increased the mineralization of acetaldehyde to CO2. However, oxidized nickel foam as a support was detrimental to the reaction. The application of nickel foam in this study significantly enhanced the separation of free carriers in TiO2 and thus improved the photocatalytic reaction yields.
Article
Chemistry, Physical
Adilah Sirivallop, Salvador Escobedo, Thanita Areerob, Hugo de Lasa, Siriluk Chiarakorn
Summary: This research successfully converts methanol into CO2 using N/Ag/TiO2 photocatalyst under visible light, showing high quantum yields and methanol conversion rates. The results achieved in this study are among the highest reported in the technical literature.
Article
Chemistry, Physical
Xuhui Feng, Fuping Pan, Peng Zhang, Xiao Wang, Hong-Cai Zhou, Yongheng Huang, Ying Li
Summary: By doping Mg2+, TiO2 photocatalysts exhibited enhanced performance with increased surface Ti3+ generation and transient photocurrent density. Among them, 1MA catalyst showed significantly improved CO production rate compared to commercially available TiO2 nanopowder P25 in CO2 reduction.
Article
Chemistry, Multidisciplinary
Cuncai Lv, Xianhua Bai, Shangbo Ning, Chenxi Song, Qingqing Guan, Bang Liu, Yaguang Li, Jinhua Ye
Summary: Converting CO2 into fuels or chemicals through photothermal catalysis is a promising solution for energy shortage and global warming. Understanding nanomaterial strategies in this process is crucial for device and catalyst design, as well as maximizing CO2 hydrogenation performance. This Perspective discusses nanomaterial design concepts, reviews recent progress, and highlights challenges and opportunities in photothermal CO2 hydrogenation.
Article
Chemistry, Physical
Yu Nie, Tingting Bo, Wei Zhou, Huilin Hu, Xiang Huang, Huaiyuan Wang, Xin Tan, Lequan Liu, Jinhua Ye, Tao Yu
Summary: Regulating the energy barrier of *COOH is crucial for the rate determining step in the photocatalytic reduction of CO2 to produce CO gas. In this study, an appropriate Zn vacancy on ZnIn2S4 was synthesized to enhance the photocatalytic CO2 reduction capacity (CO: 5.63 mmol g(-1) h(-1)) and selectivity (CO: 97.9%). Different sulfhydryl groups were used to regulate the formation of Zn vacancies in ZnIn2S4, leading to the generation of unsaturated sulfur coordination state adjacent to the Zn vacancy with fewer electrons compared to ZnIn2S4 without Zn vacancy. Experimental analysis and theoretical calculations demonstrated that the appropriate Zn vacancy shifted the Gibbs free energy of *COOH from endothermic to exothermic during the photoreduction of CO2. This work provides an engineering method to optimize cation vacancies and improve the efficiency of photocatalytic CO2 reduction by adjusting the energy barrier of intermediates.
JOURNAL OF MATERIALS CHEMISTRY A
(2023)
Article
Nanoscience & Nanotechnology
Wuqing Luo, An Li, Baopeng Yang, Hong Pang, Junwei Fu, Gen Chen, Min Liu, Xiaohe Liu, Renzhi Ma, Jinhua Ye, Ning Zhang
Summary: A hexagonal phase ZnS photocatalyst is synthesized and exhibits higher CO selectivity and better activity for CO2 reduction reactions compared to cubic ZnS. The study provides valuable insights into the synthesis and electronic structure of hexagonal ZnS for CO2 reduction reactions, which can inspire the design of highly active photocatalysts.
ACS APPLIED MATERIALS & INTERFACES
(2023)
Article
Chemistry, Physical
Kang Peng, Jingying Ye, Hongjie Wang, Hui Song, Bowen Deng, Shuang Song, Yihan Wang, Linjie Zuo, Jinhua Ye
Summary: This study demonstrates that Ru nanoparticles supported on natural halloysite nanotubes can enhance the photothermal catalytic activity and selectivity of CO2 methanation under continuous flow conditions. The optimized catalyst exhibits a photothermal catalytic performance of 1704 mmolCH(4) g(cat)(-1) h(-1) with 93% CH4 selectivity and 68% CO2 conversion, surpassing other Ru-based catalysts in photothermal CO2 reduction. The excellent catalytic performance is attributed to the unique mesoporous tubular structure, efficient light-to-heat conversion, and interfacial interactions between halloysite nanotubes and Ru. This method of utilizing natural minerals as support provides a convenient approach for the rational design of abundant and low-cost catalysts for efficient photothermal catalytic CO2 reduction.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2023)
Article
Chemistry, Physical
Xinmin Yang, Jiwei Cui, Xiaolu Liu, Qiqi Zhang, Defa Wang, Jinhua Ye, Lequan Liu
Summary: Cocatalyst is crucial in photocatalytic overall water splitting (POWS), but it also promotes H2-O2 recombination. In this study, a strategic approach of selectively coating single-layer graphene on metal cocatalyst was developed to suppress the backward reaction for efficient POWS. The results demonstrate the effectiveness of this method and its potential in developing cocatalysts with suppressed backward reaction for efficient POWS.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2023)
Article
Chemistry, Physical
Bowen Deng, Hui Song, Qi Wang, Jianan Hong, Shuang Song, Yanwei Zhang, Kang Peng, Hongwei Zhang, Tetsuya Kako, Jinhua Ye
Summary: A Ru/In2O3 catalyst is reported for efficient and stable photothermal CH3OH production from CO2 hydrogenation under atmospheric pressure. The catalyst demonstrates a remarkable solar CH3OH production, which is more than 50 times higher than that of pure In2O3 and surpasses other reported In2O3-based photothermal catalysts. Detailed characterizations show that the interaction between Ru and In2O3 enhances the activation of CO2 and H-2, and Ru modulates the electronic structure of In2O3, promoting the generation of oxygen vacancies for CH3OH formation. This work provides a rational design approach for efficient catalysts in solar CH3OH production from CO2 hydrogenation under mild conditions.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2023)
Article
Multidisciplinary Sciences
Yaguang Li, Xianhua Bai, Dachao Yuan, Chenyang Yu, Xingyuan San, Yunna Guo, Liqiang Zhang, Jinhua Ye
Summary: Cu-based high-entropy two-dimensional oxide is synthesized using a PVP templated method and shows enhanced sintering resistance and CO2 hydrogenation activity. It achieves a record photochemical energy conversion efficiency in photothermal CO2 hydrogenation under ambient sunlight irradiation.
NATURE COMMUNICATIONS
(2023)
Article
Multidisciplinary Sciences
Xin Chen, Junxiang Chen, Huayu Chen, Qiqi Zhang, Jiaxuan Li, Jiwei Cui, Yanhui Sun, Defa Wang, Jinhua Ye, Lequan Liu
Summary: In this study, a strategy of promoting water dissociation on Bi2O2CO3 is reported to achieve high solar to formate energy conversion in CO2 electroreduction. The authors identify CO3* as the key surface species for formate formation through electron spin resonance measurements and in situ Raman spectroscopy combined with isotopic labelling. The efficiency of solar to formate energy conversion reaches as high as 13.3% when combined with a photovoltaic device.
NATURE COMMUNICATIONS
(2023)
Article
Chemistry, Physical
Hao Wu, Lei Zhang, Songying Qu, Aijun Du, Junwang Tang, Yun Hau Ng
Summary: Hydrogen dopants and oxygen vacancies are important in BiVO4 photoanodes, but the impact of hydrogenation on charge transport, particularly electron small polaron formation, is not well understood. This study demonstrates that mild hydrogenation of nanoporous BiVO4 reduces the charge transport barrier, as shown by thermally activating photocurrent responses. The hydrogen atoms occupy oxygen vacancies, reducing the activation energy and facilitating electron small polaron transport. A BiVO4 photoanode with NiFeOx cocatalyst achieves an applied-bias photon-to-current efficiency of 1.91% at 0.58 V vs RHE. This study expands the understanding of hydrogen doping beyond conventional donor density/surface chemisorption mediations to include small polaron hopping.
ACS ENERGY LETTERS
(2023)
Article
Chemistry, Physical
Xiaolu Liu, Xinmin Yang, Jiwei Cui, Chenhe Wu, Yanhui Sun, Xuemei Du, Junxiang Chen, Jinhua Ye, Lequan Liu
Summary: This study demonstrates the great potential of using highly stable and active Ni-based photocatalysts for photocatalytic overall water splitting (POWS). Ni nanoparticles encapsulated in a nitrogen-doped ultrathin graphene layer were found to be an active, stable, and low-cost cocatalyst for POWS. The H-2 evolution rate over this cocatalyst was significantly higher than that of typical Pt cocatalyst, and the oxidation of Ni during the reaction was effectively suppressed through N-doped graphene coating. In addition to improving charge carrier dynamics, the introduction of N reduced the apparent activation energy of POWS.
Article
Chemistry, Multidisciplinary
Hao Huang, Shengyao Wang, Xingce Fan, Davin Philo, Liping Fang, Wenguang Tu, Teng Qiu, Zhigang Zou, Jinhua Ye
Summary: Au NPs and TiO2 are integrated via a solid-state dewetting technique, and the plasmonic frequencies range from visible to NIR region. The system allows for the photofixation of N-2 to NH3 under NIR light, offering a carbon-free and sustainable strategy for NH3 production. The Au/TiO2 plasmonic photocatalyst system shows stable performance and has the potential for better utilization of solar energy for nitrogen fixation.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2023)
Article
Chemistry, Applied
Hong Pang, Fumihiko Ichihara, Xianguang Meng, Lijuan Li, Yuqi Xiao, Wei Zhou, Jinhua Ye
Summary: This study investigates the influence of different transition metal ions on the photocatalytic CO2 reduction using copper-doped ZnS nanocrystals as the main catalyst. It was found that Ni2+, Co2+, and Cd2+ enhanced CO2 reduction, while Fe2+ suppressed the photocatalytic activity. The modified ZnS:Cu photocatalysts demonstrated tunable product selectivity, with Ni2+ and Co2+ showing high selectivity for syngas production and Cd2+ displaying remarkable formate selectivity.
JOURNAL OF ENERGY CHEMISTRY
(2023)
Review
Chemistry, Multidisciplinary
Bin Chang, Hong Pang, Fazal Raziq, Sibo Wang, Kuo-Wei Huang, Jinhua Ye, Huabin Zhang
Summary: In this review, the recent progress and challenges in preparing C2+ products are discussed. The recent advancements in carbon-carbon coupling results and proposed mechanisms are elaborated, along with the complex scenarios involved in the initial CO2 activation process, catalyst micro/nanostructure design, and mass transfer conditions optimization. The synergistic realization of high C2+ product selectivity through catalyst design and the influence of electrolytes using theoretical calculation analysis and machine learning prediction are also proposed. The in situ/operando techniques for tracking structural evolution and recording reaction intermediates during electrocatalysis are elaborated, as well as insights into triphasic interfacial reaction systems with improved C2+ selectivity.
ENERGY & ENVIRONMENTAL SCIENCE
(2023)
Article
Chemistry, Physical
Chengcheng Zhang, Yingkui Yan, Hubiao Huang, Xinsheng Peng, Hui Song, Jinhua Ye, Li Shi
Summary: Fe@PCN-222 is an efficient and selective photocatalyst that can oxidize CH4 to liquid oxygenates at room temperature using visible light. The presence of Fe single-atoms promotes the transfer of photogenerated electrons and activates H2O2, resulting in a substantial improvement in the selectivity and activity of liquid oxygenate production.
Review
Chemistry, Physical
Long Yang, Amol U. Pawar, Ramesh Poonchi Sivasankaran, Donkeun Lee, Jinhua Ye, Yujie Xiong, Zhigang Zou, Yong Zhou, Young Soo Kang
Summary: This review focuses on the identification, conversion, reaction kinetics, pathways, and mechanisms of intermediates, as well as the efficiency and selectivity of multicarbon product formations during photocatalytic and electrocatalytic CO2 reduction. Theoretical simulations and calculations provide deeper insights into this process. Future research directions and inspirations are also included to guide the integration of catalytic systems.
JOURNAL OF MATERIALS CHEMISTRY A
(2023)
Article
Chemistry, Physical
Qi-Wen Chen, Ze-Qing Guo, Jian-Ping Zhou
Summary: Multifunctional continuous solid solutions NFMTO-x were successfully synthesized via a one-step hydrothermal method by controlling the ratio of Mg and Fe. The NFMTO-x materials exhibited enhanced visible light response, effective adsorption and photocatalytic degradation of organic pollutants, CO2 methanation capability, and easy recyclability due to their magnetic properties. This research provides a significant multifunctional material for water purification.
APPLIED SURFACE SCIENCE
(2024)
Review
Chemistry, Physical
George E. Stan, Maziar Montazerian, Adam Shearer, Bryan W. Stuart, Francesco Baino, John C. Mauro, Jose M. F. Ferreira
Summary: Bioactive glasses have the ability to form strong bonds with tissues and release therapeutic ions. However, their biomechanical compatibility limits their use in load-bearing applications. The use of magnetron sputtering technology to fabricate BG coatings shows promise in improving their efficacy and potential for application.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Zhaoxuan Wang, Zhicheng Yan, Zhigang Qi, Yu Feng, Qi Chen, Ziqi Song, Meng Huang, Peng Jia, Ki Buem Kim, Weimin Wang
Summary: The corrosion behavior of Fe-60 and Fe-83 ribbons in 0.6 M NaCl was studied. Fe-60 exhibited a local corrosion mode and formed a stable passivation film with higher corrosion resistance, while Fe-83 showed a combination of local and global corrosion modes and had lower corrosion resistance. Controlling the precipitation of nanocrystalline phases and increasing the POx content in the passivation film significantly improved the corrosion resistance of Fe-based glassy alloys.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Hao-Kai Peng, Sheng-Yen Zheng, Wei-Ning Kao, Ting-Chieh Lai, Kai-Sheun Lee, Yung- Hsien Wu
Summary: This study investigates the effects of high energy/fluence proton radiation on the performance of HfZrOx-based FeFETs memory with different Zr content. The results show that the characteristics of FeFETs are influenced by proton radiation, and the extent of the influence depends on the Zr content. FeFETs with 50% Zr content exhibit minimal changes in memory window and demonstrate good endurance and retention performance.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Zongyi Yue, Guangyi Wang, Zengguang Huang, Sihua Zhong
Summary: In this study, AZO and ITO films were successfully tuned as excellent passivation layers for c-Si surfaces, achieving effective minority carrier lifetime and outstanding optical properties through the optimization of annealing temperature and interfacial silicon oxide.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Martin Hruska, Jan Kejzlar, Jaroslav Otta, Premysl Fitl, Michal Novotny, Jakub Cizek, Oksana Melikhova, Matej Micusik, Peter Machata, Martin Vrnata
Summary: This paper presents a detailed study on the hydrogen sensing capabilities of highly nanoporous black gold films. The films exhibit fast response and recovery times at low temperatures. Different levels of nanoporosity were prepared and tested to investigate the sensing properties, and it was found that nanoporous black gold is suitable for hydrogen sensing. The sensitivity of the film depends on its nanoporosity.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Yupu Wang, Gaofeng Teng, Chun To Yiu, Junyi Zhu
Summary: In the study of BM-SCO and HSCO thin films, it was found that H vacancies tend to prefer sites near the external surface or oxygen vacancy channels (OVCs), while H interstitials prefer sites of oxygen on a layer that contains six-fold coordinated Co. These findings not only enrich the understanding of complex surface phenomena of defect formation but also provide an explanation for the reversibility during phase transformation.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Jiafeng Lu, Linping Teng, Qinxiao Zhai, Chunhua Wang, Matthieu Lancry, Ye Dai, Xianglong Zeng
Summary: In this study, we achieved full control of fiber nanograting orientation by manipulating laser polarization, and tailored space variant fiber nanogratings, which expanded the diversity in fiber nanograting engineering.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Yibo Liu, Yujie Tao, Yue Liu, Qi Sun, Qinrong Lin, Kexin Kang, Qinghua Zhang, Qingjie Sun
Summary: This study investigates the wettability of the Ti-Cu-Fe multi-metal system, specifically the wetting behaviors of CuSi3 droplets on TC4 and 304SS plates. The results show that the CO2 + Ar gas atmosphere significantly affects interfacial mass transfer, thus influencing the wettability of the systems.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Jimei Liu, Fei Wang, Rong Guo, Yuqi Liu, Mengyu Zhang, Jaka Sunarso, Dong Liu
Summary: This study developed Co/MXene composites with anti-corrosion properties by varying the cobalt content. These composites exhibited remarkable electromagnetic absorption performance and high resistance to corrosion under various corrosive conditions. The study also revealed the mechanism of electron transfer from cobalt to MXene and the electromagnetic dissipation behavior originated from polarization loss alone.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Moujie Huang, Yongsong Ma, Jingbo Yang, Lingyun Xu, Hangqi Yang, Miao Wang, Xin Ma, Xin Xia, Junhao Yang, Deli Wang, Chuang Peng
Summary: Strong metal-support interactions (SMSIs) are important for enhancing catalytic activities and stability in thermal catalysis. This study demonstrates a method to create SMSIs in electrocatalysis using carbon nanotubes and Ru nanoparticles, resulting in excellent catalytic activity and stability.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Ravi Trivedi, Brinti Mondal, Nandini Garg, Brahmananda Chakraborty
Summary: This study explores the potential of biphenylene as a nanocarrier for the delivery of the anticancer drug cisplatin. It is found that biphenylene offers physical stability, rapid release rate, solubility, and bio-compatibilities compared to other nanocarriers. The adsorption of cisplatin on the surface of biphenylene involves charge transfer from cisplatin to biphenylene. The drug is shown to be released at body temperature in an acidic environment. Biphenylene also exhibits excellent cytotoxicity activity and cellular uptake of the drug. Overall, biphenylene shows promise as a potential nanocarrier for cisplatin delivery.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Hyun Jeong, Hyeong Chan Suh, Ga Hyun Cho, Rafael Salas-Montiel, Hayoung Ko, Ki Kang Kim, Mun Seok Jeong
Summary: In this study, a potential platform to enhance Raman scattering and increase the number of observable Raman modes in monolayer transition metal dichalcogenides (TMDs) was proposed. The platform consisted of large-scale arrays of gold micropillars (MPs), which were able to enhance the Raman intensity of TMDs and make difficult-to-detect Raman modes observable. The platform showed great industrial advantages and wide applicability due to its low cost, simple process, large controllable area, and short process time.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Yasir Abbas, Shafqat Ali, Sajjad Ali, Waqar Azeem, Zareen Zuhra, Haoliang Wang, Mohamed Bououdina, Zhenzhong Sun
Summary: In this study, FeOx@SPNO-C core-shell nanospheres as a catalyst for degradation of sulfamethoxazole (SMX) were successfully synthesized. The synergistic interaction between FeOx and SPNO-C, high carbon charge density, and the presence of C = O groups and N/Fe-Nx sites were found to be key factors for the enhanced degradation of SMX.
APPLIED SURFACE SCIENCE
(2024)
Article
Chemistry, Physical
Qiaoting Yang, Yuxiao Gong, Yan Qian, Zhou-Qing Xiao, Serge Cosnier, Xue-Ji Zhang, Robert S. Marks, Dan Shan
Summary: This study proposes a hierarchical confinement strategy to design Prussian blue nanoparticles (PB NPs) with satisfactory electrocatalytic ability and stability. The catalytic synthesis of PB NPs is achieved through a hydrothermal process, and the as-prepared PB@NH2MIL exhibits efficient electronic transmission and enhanced electrocatalytic properties.
APPLIED SURFACE SCIENCE
(2024)
