Influence of viscosity modifier nature and concentration on the viscous flow behaviour of oil-based drilling fluids at high pressure

This work deals with the effect of viscosity modifier nature and concentration on the rheological properties of model oil-based drilling fluids (OBM) submitted to high pressure. The oil-based fluids were formulated by dispersing, with a high shear mixer, two selected organobentonites in a mineral oil, at room temperature. The viscous flow behaviour of the corresponding dispersions was characterised as a function of pressure, organoclay nature and organoclay concentration, using a controlled-stress rheometer equipped with both pressure cell and coaxial cylinder geometries. A factorial Sisko-Barus model, which takes into account both shear and pressure effects in the same equation, fitted the experimental pressure-viscosity data fairly well. The influence of disperse phase concentration on the shear-thinning characteristics of these organoclay dispersions is related to the development of different microstructures, which depend on organoclay nature. In this sense, the resulting microstructure has been attributed to the cohesion energy between microgels domains. From the experimental results obtained, it can be concluded that the viscous flow behaviour of the OBM investigated is strongly affected by organoclay nature and concentration. The pressure-viscosity behaviour of these dispersions is mainly influenced by the piezoviscous properties of the oil and the properties of the continuous phase. The Sisko-Barus model proposed can be a useful tool, from an engineering point of view, for calculating pressure losses in the different sections of the bore, as well as being of significant help to solve other additional problems, such as hole cleaning, induced fracturing, and hole erosion during the drilling operation. (C) 2013 Elsevier B.V. All rights reserved.