Deposition of Coating to Protect Waste Water Reservoir in Acidic Solution by Arc Thermal Spray Process

On the Electrochemical Behavior of PVD Ti-Coated AISI 304 Stainless Steel in Borate Buffer Solution

(2017) Arash Fattah-alhosseini et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Optimization of Oxidation Temperature for Commercially Pure Titanium to Achieve Improved Corrosion Resistance

(2017) Rajesh Bansal et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Influence of grain refinement on the electrochemical behavior of AISI 430 ferritic stainless steel in an alkaline solution

(2016) A. Fattah-alhosseini et al.   APPLIED SURFACE SCIENCE

Pore blocking characteristics of corrosion products formed on Aluminum coating produced by arc thermal metal spray process in 3.5 wt.% NaCl solution

(2016) Han-Seung Lee et al.   CONSTRUCTION AND BUILDING MATERIALS

Protection of Reinforced Concrete Structures of Waste Water Treatment Reservoirs with Stainless Steel Coating Using Arc Thermal Spraying Technique in Acidified Water

(2016) Han-Seung Lee et al.   Materials

Corrosion Resistance Properties of Aluminum Coating Applied by Arc Thermal Metal Spray in SAE J2334 Solution with Exposure Periods

(2016) Han-Seung Lee et al.   Metals

Anodic Film Growth of Titanium Oxide Using the 3-Electrode Electrochemical Technique: Effects of Oxygen Evolution and Morphological Characterizations

(2015) Z. J. Liu et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Passivation behavior of a ferritic stainless steel in concentrated alkaline solutions

(2015) Arash Fattah-alhosseini et al.   Journal of Materials Research and Technology-JMR&T

Enhanced Performance of Nanostructured Coatings for Drilling by Droplet Elimination

(2014) S. Rodríguez-Barrero et al.   MATERIALS AND MANUFACTURING PROCESSES

Experimental Study on the Electrochemical Anti-Corrosion Properties of Steel Structures Applying the Arc Thermal Metal Spraying Method

(2014) Hong-Bok Choe et al.   Materials

Effect of anodization on corrosion behaviour and biocompatibility of Cp-titanium in simulated body fluid

(2013) ARCHANA SINGH et al.   BULLETIN OF MATERIALS SCIENCE

Role of Manganese Sulfide Inclusions in Steel Rebar in the Formation and Breakdown of Passive Films in Concrete Pore Solutions

(2013) Abdulaziz Al-Negheimish et al.   CORROSION

Study on influence of native oxide and corrosion products on atmospheric corrosion of pure Al

(2013) Yanjie Liu et al.   CORROSION SCIENCE

Corrosion behavior of arc sprayed Al–Zn–Si–RE coatings on mild steel in 3.5wt% NaCl solution

(2013) Qiong Jiang et al.   ELECTROCHIMICA ACTA

Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys

(2013) Z. Wu et al.   INTERMETALLICS

Leaching of hazardous substances from a composite construction product – An experimental and modelling approach for fibre-cement sheets

(2013) Maria Lupsea et al.   JOURNAL OF HAZARDOUS MATERIALS

Molybdenum modified AISI 304 stainless steel bipolar plate for proton exchange membrane fuel cell

(2013) Lixia Wang et al.   Journal of Renewable and Sustainable Energy

Thermal oxidation of titanium: Evaluation of corrosion resistance as a function of cooling rate

(2013) M. Jamesh et al.   MATERIALS CHEMISTRY AND PHYSICS

An overview of intermetallics research and application: Status of thermal spray coatings

(2013) Nuria Cinca et al.   Journal of Materials Research and Technology-JMR&T

EIS evaluation of steady-state characteristic of 316L stainless steel passive film grown in acidic solution

(2012) C. Boissy et al.   ELECTROCHEMISTRY COMMUNICATIONS

Corrosion Protection of Light Alloys Using Low Pressure Cold Spray

(2012) D. Dzhurinskiy et al.   JOURNAL OF THERMAL SPRAY TECHNOLOGY

The nature of rusts and corrosion characteristics of low alloy and plain carbon steels in three kinds of concrete pore solution with salinity and different pH

(2011) J.K. Singh et al.   CORROSION SCIENCE

Growth kinetics of hydrogen sulfide oxidizing bacteria in corroded concrete from sewers

(2011) Henriette Stokbro Jensen et al.   JOURNAL OF HAZARDOUS MATERIALS

Corrosion resistant Ti alloy for sulphuric acid medium: Suitability of Ti-Mo alloys

(2011) T. Balusamy et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

EIS and XPS studies on passive film of AISI 304 stainless steel in dilute sulfuric acid solution

(2011) W. Y. Lai et al.   SURFACE AND INTERFACE ANALYSIS

Improvement in corrosion resistance of commercial pure titanium for the enhancement of its biocompatibility

(2010) Q. Mohsen et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Corrosion performance of HVOF and APS thermally sprayed NiTi intermetallic coatings in 3.5% NaCl solution

(2009) M.M. Verdian et al.   CORROSION SCIENCE

Determination of effective capacitance and film thickness from constant-phase-element parameters

(2009) Bryan Hirschorn et al.   ELECTROCHIMICA ACTA

Thermal oxidation of CP-Ti: Evaluation of characteristics and corrosion resistance as a function of treatment time

(2009) Satendra Kumar et al.   Materials Science & Engineering C-Materials for Biological Applications

EIS study on passive films of AISI 304 stainless steel in oxygenous sulfuric acid solution

(2009) Weiya Lai et al.   SURFACE AND INTERFACE ANALYSIS

Evaluating Zn, Al and Al–Zn coatings on carbon steel in a special atmosphere

(2008) O. de Rincón et al.   CONSTRUCTION AND BUILDING MATERIALS

Corrosion resistance and cytocompatibility of biodegradable surgical magnesium alloy coated with hydrogenated amorphous silicon

(2008) Yunchang Xin et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Plasma nitrided titanium as a bipolar plate for proton exchange membrane fuel cell

(2008) Jing Liu et al.   JOURNAL OF POWER SOURCES