Effect of MWCNT-Fe3O4/water hybrid nanofluid on the thermal performance of ribbed channel with apart sections of heating and cooling

A two-dimensional (2D) numerical simulation is performed to simulate the laminar forced convection of a nanofluid in a ribbed channel with apart heating (cooling) sources using lattice Boltzmann method (LBM). The multi-walled carbon nanotubes-iron oxide nanoparticles/water hybrid nanofluid (MWCNT-Fe3O4/water hybrid nanofluid) is used in this simulation. The velocity field, temperature distribution and heat transfer rate are numerically analyzed with the streamlines and isotherm patterns employing of a house code. In addition, the effect of Reynolds number (Re = 25, 50, 75 and 100), nanoparticle solid volume fraction (I center dot = 0, 0.001, 0.003) and ratio of the blocks height (A = 0.2, 0.3, 0.4) are measured. The results are validated against the results reported in the literature, and a good agreement is reported. The obtained results show a maximum value of 16.49% increase in the average heat transfer coefficient for all the considered cases relative to the base fluid. Moreover, the local Nusselt number proves that the use of blocks on the channel walls can increase the amount of heat transfer. Finally, the average Nusselt number shows a linear dependence on the increasing ratio of blocks height for constant solid volume fraction. The results of this study apply to the industrial equipment heating and cooling applications.