期刊
JOURNAL OF MOLECULAR LIQUIDS
卷 255, 期 -, 页码 572-577出版社
ELSEVIER SCIENCE BV
DOI: 10.1016/j.molliq.2018.01.188
关键词
Barberry stem; Dye; Isotherm; Kinetics; Reactive red 195
资金
- Birjand University of Medical Sciences, Department of Environmental Health Engineering [4141]
Dyes are used in various sectors, such as the textile, leather, paper, and plastic industries, and a significant part of this dye enters the environment via wastewaters. The present research was a laboratory-scale study with the aim of investigating the effective parameters in the dye-removal process, including pH (3-11), contact time (5-120 min), dye concentration (10-50 mg/I), adsorbent dose (1-4 g/l), and temperature (15-35 degrees C). The maximum adsorption capacity was observed at pH = 3, contact time = 10 min, initial dye concentration = 50 mg/l, adsorbent dose = 1 g/l, and temperature = 15 C. With these parameters, the maximum adsorption capacities for barberry stem powder and ash were 27.2 mg/g and 8.8 mg/g, respectively. The results of examining the adsorption isotherms showed that the barberry powder followed from both the Langmuir (0.94) and Freundlich (0.94) isotherms, while barberry stem ash followed from the Freundlich (0.85) isotherm. Kinetic adsorption studies showed that the dye adsorption on both adsorbents followed a pseudo-second-order kinetics. The results showed that the barberry stem powder and ash had desirable capacity in reactive red 195 (RR195) dye from aqueous solutions and textile wastewaters. (C) 2018 Elsevier B.V. All rights reserved.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据