3D numerical modelling of a pulsed pumping process of a large DNAPL pool: In situ pilot-scale case study of hexachlorobutadiene in a keyed enclosure

Remediation of dense non-aqueous phase liquids (DNAPLs) represents a challenging issue because of their persistent behaviour in the environment. This pilot-scale study investigates, by means of in situ experiments and numerical modelling, the feasibility of the pulsed pumping process of a large amount of a DNAPL in an alluvial aquifer. The main compound of the DNAPL is hexachlorobutadiene (HCBD), added in 2015 to the persistent organic pollutants list (POP). A low-permeability keyed enclosure was built at the location of the DNAPL source zone in order to isolate a finite volume of soil and a 3-month pulsed pumping process was applied inside the enclosure to exclusively extract the DNAPL. The water/DNAPL interface elevation at both the pumping well and an observation well was recorded. The cumulated pumped volume of DNAPL was also monitored. A total volume of about 20 m(3) of pure DNAPL was recovered since no water was extracted during the process. The three-dimensional and multiphase flow simulator TMVOC was used and a conceptual model was elaborated and generated with the pre/post-processing tool mView. Numerical simulations reproduce the pulsed pumping process and show an excellent match between simulated and field data of DNAPL cumulated pumped volume and a reasonable agreement between modelled and observed data for the evolution of the water/DNAPL interface elevations at the two wells. This study offers a new perspective in remediation since DNAPL pumping system optimisation may be performed where a large amount of DNAPL is encountered.