Effects of different catalysts on the structure and properties of polyurethane/water glass grouting materials

Effects of air volume ratio parameters on air curtain dust suppression in a rock tunnel’s fully-mechanized working face

(2018) Hao Wang et al.   ADVANCED POWDER TECHNOLOGY

Non-linear seepage characteristics and influential factors of water injection in gassy seams

(2018) Weimin Cheng et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Influence of synthetic conditions on the performance of melamine–phenol–formaldehyde resin microcapsules

(2018) Zun-Xiang Hu et al.   HIGH PERFORMANCE POLYMERS

The effects of the installation position of a multi-radial swirling air-curtain generator on dust diffusion and pollution rules in a fully-mechanized excavation face: A case study

(2018) Qiang Liu et al.   POWDER TECHNOLOGY

The mechanism and relief method of the coal seam water blocking effect (WBE) based on the surfactants

(2018) Guanhua Ni et al.   POWDER TECHNOLOGY

Preparation and characterization of a wetting-agglomeration-based hybrid coal dust suppressant

(2018) Tao Fan et al.   PROCESS SAFETY AND ENVIRONMENTAL PROTECTION

Effect of joint angle in coal on failure mechanical behaviour of roof rock–coal combined body

(2018) Dawei Yin et al.   QUARTERLY JOURNAL OF ENGINEERING GEOLOGY AND HYDROGEOLOGY

Outburst mechanism of tunnelling through coal seams and the safety strategy by using “strong-weak” coupling circle-layers

(2018) Wei Yang et al.   TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY

An intelligent gel designed to control the spontaneous combustion of coal: Fire prevention and extinguishing properties

(2017) Weimin Cheng et al.   FUEL

Estimation of Elastic Modulus of Rock Using Modified Point-Load Test

(2017) T. Zhao et al.   GEOTECHNICAL TESTING JOURNAL

In Situ Investigations on Failure Evolution of Overlying Strata Induced by Mining Multiple Coal Seams

(2017) Y. L. Tan et al.   GEOTECHNICAL TESTING JOURNAL

Experimental and in-situ estimation on hydrogen and methane emission from spontaneous gasification in coal fire

(2017) Yanming Wang et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Methane explosion suppression characteristics based on the NaHCO 3 /red-mud composite powders with core-shell structure

(2017) Yan Wang et al.   JOURNAL OF HAZARDOUS MATERIALS

Microstructure and Fatigue Performance of Polyurethane Grout Materials under Compression

(2017) Ya Wei et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

The diffusion behavior law of respirable dust at fully mechanized caving face in coal mine: CFD numerical simulation and engineering application

(2017) Gang Zhou et al.   PROCESS SAFETY AND ENVIRONMENTAL PROTECTION

Effect of silane treatment on the mechanical properties of polyurethane/water glass grouting materials

(2016) Zhenglong He et al.   CONSTRUCTION AND BUILDING MATERIALS

Flame-retardant properties of sodium silicate/polyisocyanate organic–inorganic hybrid material

(2016) Jia-Ji Cheng et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Cross-linkable polyethers as healing/sealing agents for self-healing of cementitious materials

(2016) Maria Araújo et al.   MATERIALS & DESIGN

Developing a polymer-based crack repairing material using interpenetrate polymer network (IPN) technology

(2015) Hao Wu et al.   CONSTRUCTION AND BUILDING MATERIALS

Reductive smelting of spent lead–acid battery colloid sludge in a molten Na2CO3 salt

(2015) Yu-jie Hu et al.   International Journal of Minerals Metallurgy and Materials

Flame retardant, thermal, and mechanical properties of glass fiber/nanoclay reinforced phenol-urea-formaldehyde foam

(2015) Xiangming Hu et al.   POLYMER COMPOSITES

Study on structure and performance of reactive silicate reinforced polyurethane composite

(2015) Xiaodong Hong et al.   POLYMER ENGINEERING AND SCIENCE

The Formation Process of Silico-Ferrite of Calcium (SFC) from Binary Calcium Ferrite

(2014) Xiang Ding et al.   METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE

Combined effect of superplasticizer, silica fume and temperature in the performance of natural hydraulic lime grouts

(2013) Luis G. Baltazar et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of different superplasticisers on the physical and mechanical properties of cement grouts

(2013) Costas A. Anagnostopoulos   CONSTRUCTION AND BUILDING MATERIALS

Effect of polyethylene glycol on the mechanical property, microstructure, thermal stability, and flame resistance of phenol–urea–formaldehyde foams

(2013) X. M. Hu et al.   JOURNAL OF MATERIALS SCIENCE

Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines

(2013) Md Shamsuddoha et al.   MATERIALS & DESIGN

An experimental study on strengthening reinforced concrete T-beams using new material poly-urethane-cement (PUC)

(2012) Haleem K. Hussain et al.   CONSTRUCTION AND BUILDING MATERIALS

Bonding Mechanism Between Waterglass/Polyurethane Adhesive and Coal

(2012) Xue-mao Guan et al.   The Journal of Adhesion

Preparation, curing kinetics, and properties of a novel low-volatile starlike aliphatic-polyamine curing agent for epoxy resins

(2011) Jintao Wan et al.   CHEMICAL ENGINEERING JOURNAL

Use of multifunctional nanoporous TiO(OH)2 for catalytic NaHCO3 decomposition-eventually for Na2CO3/NaHCO3 based CO2 separation technology

(2011) Bryce Dutcher et al.   SEPARATION AND PURIFICATION TECHNOLOGY

Durability assessment of epoxy modified concrete

(2010) Moetaz M. El-Hawary et al.   CONSTRUCTION AND BUILDING MATERIALS

Texture, mineralogy, and rock strength in horizontal stress-related coal mine roof falls

(2008) S.E. Phillipson   INTERNATIONAL JOURNAL OF COAL GEOLOGY

Synthesis and characterization of novel biodegradable and biocompatible poly(ester-urethane) thin films prepared by homogeneous solution polymerization

(2008) Wenshou Wang et al.   POLYMER