期刊
MATERIALS & DESIGN
卷 115, 期 -, 页码 112-120出版社
ELSEVIER SCI LTD
DOI: 10.1016/j.matdes.2016.11.044
关键词
Underwater laser beam welding; Welding process; Weld quality; Optical fiber laser
资金
- State Key Development Program for Basic Research of China [2013CB035502]
- Shandong Provincial Science and Technology Development Plan [2014GGX103033]
- Postdoctoral Science Foundation of China [2014M561343]
A series of experiments under various water depths were performed using an optical fiber laser without draining the welding zone to study the effect of water depth on the laser welding. The ULBW processes were also monitored using a camera. Firstly, welding experiments were performed with laser power 3.0 kW, welding speed 0.6 m/min, focal position 0 mm. It was found that water has a slight effect on the ULBW, particularly when the water depth is less than 3 mm; however, when the water depth is greater than 7 mm, water has a strong hindering effect on ULBW and leads it to failure. In the process of direct ULBW, the 'beam channel' is formed in the water environment between the incident laser beam and the target surface as a result of the gas pressure inside the plasma exceed the water pressure depending on the water depth. The stability of the 'beam channel', which gradually worsens with increasing water depth, have an important influence on the weld bead quality and the welding process stability. Additionally, laser power has the greatest effect on the available water depth, followed by the welding speed, while focal position has little effect on it. (C) 2016 Elsevier Ltd. All rights reserved.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据