Arenesulfonic Acid-Functionalized Bentonite as Catalyst in Glycerol Esterification with Acetic Acid

The present study is focused on the synthesis of arenesulfonic acid-functionalized bentonite as a catalyst to produce monoacetin, diacetin, and triacetin from glycerol and acetic acid using toluene as solvent and a water removing agent. The best conditions for the present reaction with acetic acid were an acetic acid: glycerol: toluene molar ratio of 7:1:1.4, 100 degrees C, and 0.074 wt % of catalyst (based on the total weight of glycerol). Under the reaction conditions, 96% glycerol conversion was achieved within 0.5 h from the start of the reaction. The maximum selectivity of 66% and 74% were achieved for diacetin and triacetin after 0.5 and 3 h of reaction, respectively, without formation of any byproduct. The arenesulfonic acid-functionalized bentonite was characterized by X-ray diffraction, thermogravimetric analysis, Fourier transform infrared spectroscopy, N-2 adsorption/desorption experiments (Brunauer, Emmett and Teller, BET, method), field emission scanning electron microscopy, and the surface acidity was determined by back titration. Without significant treatment, the catalyst was reusable for 5 consecutive runs.