Use of Novel Composite Coagulants for Arsenic Removal from Waters-Experimental Insight for the Application of Polyferric Sulfate (PFS)

In the present study, several pre-polymerized coagulants of iron and aluminum were tested for their efficiency towards As(V) and As(III) removal from water sources. The results showed that the pre-polymerized coagulants of iron, such as poly-ferric sulfate and poly-ferric silicate chloride, were very efficient for As(V) removal. With regard to As(III) removal, among all examined coagulants, including the conventional ferric chloride, only the poly-ferric sulfate (PFS) was able to reduce As(III) to concentrations below the drinking water regulation limit of 10 mu g/L. In contrast, all tested composite coagulants based on aluminum were not capable of removing efficiently both species of arsenic. PFS addition in water containing 4 mM of alkalinity and 25 mu g/L of As(V) and As(III) (i.e., total arsenic concentration 50 mu g/L) resulted in finished water with less than 5 mu g/L arsenic, only by dosing 5 mg Fe-PFS/L at pH 7, whereas, simultaneously, the residual iron concentration was found well below its drinking water regulation limit of 200 mu g/L. The use of PFS could provide a viable alternative for As(III) and As(V) removal at household treatment level for application in vulnerable communities, without the need of any additional treatment, such as oxidation of As(III) to As(V).