Lignocellulosic fibers: a critical review of the extrusion process for enhancement of the properties of natural fiber composites
出版年份 2017 全文链接
标题
Lignocellulosic fibers: a critical review of the extrusion process for enhancement of the properties of natural fiber composites
作者
关键词
-
出版物
RSC Advances
Volume 7, Issue 55, Pages 34638-34654
出版商
Royal Society of Chemistry (RSC)
发表日期
2017-07-11
DOI
10.1039/c7ra05240e
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Influence of flax fibre variety and year-to-year variability on composite properties
- (2017) Katharina Haag et al. INDUSTRIAL CROPS AND PRODUCTS
- Improving the performance of hemp hurd/polypropylene composites using pectinase pre-treatments
- (2017) Xiaoping Li et al. INDUSTRIAL CROPS AND PRODUCTS
- Processing and properties of pineapple leaf fibers-polypropylene composites prepared by twin-screw extrusion
- (2017) Françoise Berzin et al. POLYMER COMPOSITES
- Why do we observe significant differences between measured and ‘back-calculated’ properties of natural fibres?
- (2016) Darshil U. Shah et al. CELLULOSE
- Lignocellulosic fiber breakage in a molten polymer. Part 1. Qualitative analysis using rheo-optical observations
- (2016) R. Castellani et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Review of the recent developments in cellulose nanocomposite processing
- (2016) Kristiina Oksman et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Damage in biocomposites: Stiffness evolution of aligned plant fibre composites during monotonic and cyclic fatigue loading
- (2016) Darshil U. Shah COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Dynamic particle analysis for the evaluation of particle degradation during compounding of wood plastic composites
- (2016) Laura Teuber et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- A review of recent developments in natural fibre composites and their mechanical performance
- (2016) K.L. Pickering et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Surface properties and fibre-matrix adhesion of man-made cellulose epoxy composites – Influence on impact properties
- (2016) A. Mader et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Influence of processing temperature on mechanical performance of unidirectional polyamide 11–flax fibre composites
- (2016) Alain Bourmaud et al. INDUSTRIAL CROPS AND PRODUCTS
- Recycling of L-Poly-(lactide)-Poly-(butylene-succinate)-flax biocomposite
- (2016) Alain Bourmaud et al. POLYMER DEGRADATION AND STABILITY
- Ferulic Acid-Based Bis/Trisphenols as Renewable Antioxidants for Polypropylene and Poly(butylene succinate)
- (2016) Armando F. Reano et al. ACS Sustainable Chemistry & Engineering
- Effect of alkali treatment on Alfa fibre as reinforcement for polypropylene based eco-composites: Mechanical behaviour and water ageing
- (2015) Fatima Ezzahra El-Abbassi et al. COMPOSITE STRUCTURES
- Influence of compatibilizing system on morphology, thermal and mechanical properties of high flow polypropylene reinforced with short hemp fibers
- (2015) Denis Mihaela Panaitescu et al. COMPOSITES PART B-ENGINEERING
- Fully biodegradable composites: Use of poly-(butylene-succinate) as a matrix and to plasticize l-poly-(lactide)-flax blends
- (2015) Alain Bourmaud et al. INDUSTRIAL CROPS AND PRODUCTS
- Polypropylene biocomposites reinforced with softwood, abaca, jute, and kenaf fibers
- (2015) A.K. Bledzki et al. INDUSTRIAL CROPS AND PRODUCTS
- Intumescence: Tradition versus novelty. A comprehensive review
- (2015) Jenny Alongi et al. PROGRESS IN POLYMER SCIENCE
- Effects of MAPP Compatibilization and Acetylation Treatment Followed by Hydrothermal Aging on Polypropylene Alfa Fiber Composites
- (2015) Noura Hamour et al. International Journal of Polymer Science
- Assessing the Environmental Impact of Flax Fibre Reinforced Polymer Composite from a Consequential Life Cycle Assessment Perspective
- (2015) Yelin Deng et al. Sustainability
- Flax/polypropylene composites for lightened structures: Multiscale analysis of process and fibre parameters
- (2015) Awa S. Doumbia et al. MATERIALS & DESIGN
- Evolution of lignocellulosic fibre lengths along the screw profile during twin screw compounding with polycaprolactone
- (2014) Françoise Berzin et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Effect of surface treatment on thermal stability of the hemp-PLA composites: Correlation of activation energy with thermal degradation
- (2014) Shubhashini Oza et al. COMPOSITES PART B-ENGINEERING
- A new lignocellulosic biomass deconstruction process combining thermo-mechano chemical action and bio-catalytic enzymatic hydrolysis in a twin-screw extruder
- (2014) Virginie Vandenbossche et al. INDUSTRIAL CROPS AND PRODUCTS
- Effect of extruder elements on fiber dimensions and mechanical properties of bast natural fiber polypropylene composites
- (2014) Ahmed Mohammed Moneeb El-Sabbagh et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Coupled micromechanical analysis and life cycle assessment as an integrated tool for natural fibre composites development
- (2014) Antoine Le Duigou et al. JOURNAL OF CLEANER PRODUCTION
- Natural fibre composites: Comprehensive Ashby-type materials selection charts
- (2014) Darshil U. Shah MATERIALS & DESIGN
- Recycling of bioplastics, their blends and biocomposites: A review
- (2013) Azadeh Soroudi et al. EUROPEAN POLYMER JOURNAL
- Twin-screw extrusion impact on natural fibre morphology and material properties in poly(lactic acid) based biocomposites
- (2013) G. Gamon et al. INDUSTRIAL CROPS AND PRODUCTS
- Study of the interface in natural fibres reinforced poly(lactic acid) biocomposites modified by optimized organosilane treatments
- (2013) Nicolas Le Moigne et al. INDUSTRIAL CROPS AND PRODUCTS
- Kinetics of thermal degradation applied to biocomposites with TPS, PCL and sisal fibers by non-isothermal procedures
- (2013) Vitor Brait Carmona et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- Mechanical and thermal properties of polymer composite based on natural fibers: Moroccan hemp fibers/polypropylene
- (2013) A. Elkhaoulani et al. MATERIALS & DESIGN
- Study of the fibre morphology stability in polypropylene-flax composites
- (2013) Gilles Ausias et al. POLYMER DEGRADATION AND STABILITY
- Sustainability assessments of bio-based polymers
- (2013) Troy A. Hottle et al. POLYMER DEGRADATION AND STABILITY
- Effect of corona discharge treatment on mechanical and thermal properties of composites based on miscanthus fibres and polylactic acid or polypropylene matrix
- (2012) M. Ragoubi et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- In situ observations of microscale damage evolution in unidirectional natural fibre composites
- (2012) Morten Rask et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
- (2012) M.M. Kabir et al. COMPOSITES PART B-ENGINEERING
- Characterisation of flax polypropylene composites using ultrasonic longitudinal sound wave technique
- (2012) A. El-Sabbagh et al. COMPOSITES PART B-ENGINEERING
- Tensile, flexural and torsional properties of chemically treated alfa, coir and bagasse reinforced polypropylene
- (2012) F.Z. Arrakhiz et al. COMPOSITES PART B-ENGINEERING
- Lignocellulosic fiber reinforced composites: Influence of compounding conditions on defibrization and mechanical properties
- (2012) Johnny Beaugrand et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Evaluation of mechanical and thermal properties of Pine cone fibers reinforced compatibilized polypropylene
- (2012) F.Z. Arrakhiz et al. MATERIALS & DESIGN
- Hemp fibers/polypropylene composites by reactive compounding: Improvement of physical properties promoted by selective coupling chemistry
- (2012) A. Rachini et al. POLYMER DEGRADATION AND STABILITY
- Biocomposites reinforced with natural fibers: 2000–2010
- (2012) Omar Faruk et al. PROGRESS IN POLYMER SCIENCE
- Influence of loading rate, alkali fibre treatment and crystallinity on fracture toughness of random short hemp fibre reinforced polylactide bio-composites
- (2011) Kim L. Pickering et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- A statistical analysis of fibre size and shape distribution after compounding in composites reinforced by natural fibres
- (2011) Nicolas Le Moigne et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Effect of fibre treatments on interfacial shear strength of hemp fibre reinforced polylactide and unsaturated polyester composites
- (2011) Moyeenuddin A. Sawpan et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Flexural properties of hemp fibre reinforced polylactide and unsaturated polyester composites
- (2011) Moyeenuddin A. Sawpan et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- A review on the tensile properties of natural fiber reinforced polymer composites
- (2011) H. Ku et al. COMPOSITES PART B-ENGINEERING
- PLA Based Biopolymer Reinforced with Natural Fibre: A Review
- (2011) Tapasi Mukherjee et al. JOURNAL OF POLYMERS AND THE ENVIRONMENT
- Correlation between processing conditions and fiber breakage during compounding of glass fiber-reinforced polyamide
- (2011) Funda Inceoglu et al. POLYMER COMPOSITES
- A review of bast fibres and their composites. Part 1 – Fibres as reinforcements
- (2010) John Summerscales et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Improvement of mechanical performance of industrial hemp fibre reinforced polylactide biocomposites
- (2010) Moyeenuddin A. Sawpan et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Polypropylene composites with enzyme modified abaca fibre
- (2010) Andrzej K. Bledzki et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Mechanical performance of biocomposites based on PLA and PHBV reinforced with natural fibres – A comparative study to PP
- (2010) A.K. Bledzki et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Viscoelastic properties of woody hemp core
- (2010) Rahime Bag et al. HOLZFORSCHUNG
- Flame retardancy of polylactide: an overview
- (2010) Serge Bourbigot et al. Polymer Chemistry
- Effects of thermo mechanical processing on the mechanical properties of biocomposite flax fibers evaluated by nanoindentation
- (2010) Alain Bourmaud et al. POLYMER DEGRADATION AND STABILITY
- Effect of mixing conditions and initial fiber morphology on fiber dimensions after processing
- (2009) C. Quijano-Solis et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Mechanical properties of PLA composites with man-made cellulose and abaca fibres
- (2009) Andrzej K. Bledzki et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Plant fibre composites – porosity and stiffness
- (2009) Bo Madsen et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Polyolefin composites with curaua fibres: Effect of the processing conditions on mechanical properties, morphology and fibres dimensions
- (2009) B. Mano et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Impact of corona treated hemp fibres onto mechanical properties of polypropylene composites made thereof
- (2009) Mohamed Ragoubi et al. INDUSTRIAL CROPS AND PRODUCTS
- Thermal properties and spectral characterization of wood pulp reinforced bio-composite fibers
- (2009) A. Awal et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- Recycling and recovery routes of plastic solid waste (PSW): A review
- (2009) S.M. Al-Salem et al. WASTE MANAGEMENT
- Polypropylene-natural fibre composites. Analysis of fibre structure modification during compounding and its influence on the final properties
- (2008) Debora Puglia et al. COMPOSITE INTERFACES
- Engineering and evaluation of hemp fibre reinforced polypropylene composites: Micro-mechanics and strength prediction modelling
- (2008) G.W. Beckermann et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Poly(lactic acid)-based biocomposites reinforced with kenaf fibers
- (2008) Maurizio Avella et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Inverse gas chromatography for determining the dispersive surface free energy and acid-base interactions of sheet molding compound-Part II 14 Ligno-cellulosic fiber types for possible composite reinforcement
- (2008) Ryan H. Mills et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Soda-Treated Sisal/Polypropylene Composites
- (2008) Maria T. B. Pimenta et al. JOURNAL OF POLYMERS AND THE ENVIRONMENT
- Hemp Fiber-Reinforced 1-Pentene/Polypropylene Copolymer: The Effect of Fiber Loading on the Mechanical and Thermal Characteristics of the Composites
- (2008) M.C. Khoathane et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Recent Development in Natural Fiber Reinforced Polypropylene Composites
- (2008) Ramakrishna Malkapuram et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now