Performance of ANFIS Coupled with PSO in Manufacturing Superior Wear Resistant Aluminum Matrix Nano Composites

Optimization of the EMS process parameters in compocasting of high-wear-resistant Al-nano-TiC composites

(2016) Majid Shamsipour et al.   APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING

Superior Tribological Properties of Particulate Aluminum Matrix Nano Composites

(2016) Mohsen Ostad Shabani et al.   Protection of Metals and Physical Chemistry of Surfaces

Wear properties of rheo-squeeze cast aluminum matrix reinforced with nano particulates

(2016) Mohsen Ostad Shabani et al.   Protection of Metals and Physical Chemistry of Surfaces

Wear Behavior of Plasma Sprayed Nanostructured Al–SiCp Composite Coatings: A Comparative Study

(2016) Satish Tailor et al.   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS

Mechanical Properties and Abrasive Wear Behaviour of Functionally Graded Al-Si12Cu/Al2O3 Metal Matrix Composite

(2016) N. Radhika   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS

Statistical Analysis and Particle Swarm Based Optimization of Mechanical Properties of Rice Husk and Termite Mound Soil Impregnated Coir–Polyester Composites

(2015) S. Jayabal et al.   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS

Mechanical and Wear Properties of Al–Al2O3 Metal Matrix Composites Fabricated by the Combined Effect of Stir and Squeeze Casting Method

(2015) K. Sekar et al.   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS

Searching for the superior solution to the population-based optimization problem: Processing of the wear resistant commercial AA6061 AMCs

(2014) Ali Mazahery et al.   INTERNATIONAL JOURNAL OF DAMAGE MECHANICS

Modification Mechanism and Microstructural Characteristics of Eutectic Si in Casting Al-Si Alloys: A Review on Experimental and Numerical Studies

(2014) Ali Mazahery et al.   JOM

Application of the combined neuro-computing, fuzzy logic and swarm intelligence for optimization of compocast nanocomposites

(2014) Ali Asghar Tofigh et al.   JOURNAL OF COMPOSITE MATERIALS

Investigation on the Effect of Mold Constraints and Cooling Rate on Residual Stress During the Sand-Casting Process of 1086 Steel by Employing a Thermomechanical Model

(2014) Amir Baghani et al.   METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE

Refined microstructure of compo cast nanocomposites: the performance of combined neuro-computing, fuzzy logic and particle swarm techniques

(2014) Mohsen Ostad Shabani et al.   NEURAL COMPUTING & APPLICATIONS

Effects of hydrogen level and cooling rate on ultimate tensile strength of Al A319 alloy

(2014) A. Bahmani et al.   Russian Journal of Non-Ferrous Metals

Experimental Investigation on the Aging Response, Hardness and Total Impact Energy Absorption of Sr-Modified Heat-Treatable Cast Automotive Aluminum Alloys

(2014) Ali Mazahery et al.   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS

Numerical and experimental investigations of weld pool geometry in GTA welding of pure aluminum

(2014) A. H. Faraji et al.   Journal of Central South University

Efficient optimum solution for high strength Al alloys matrix composites

(2013) Ali Asghar Tofigh et al.   CERAMICS INTERNATIONAL

Study on mechanical and wear properties of Al 7075/Al2O3/graphite hybrid composites

(2013) A. Baradeswaran et al.   COMPOSITES PART B-ENGINEERING

Extruded AA6061 alloy matrix composites: The performance of multi-strategies to extend the searching area of the optimization algorithm

(2013) Ali Mazahery et al.   JOURNAL OF COMPOSITE MATERIALS

Effect of Addition of TiC Master Alloy on the Properties of CK45

(2013) Mansour Razavi et al.   MATERIALS AND MANUFACTURING PROCESSES

Strategic developments to improve the optimization performance with efficient optimum solution and produce high wear resistance aluminum–copper alloy matrix composites

(2013) Mohammad Reza Rahimipour et al.   NEURAL COMPUTING & APPLICATIONS

Development of the principle of simulated natural evolution in searching for a more superior solution: Proper selection of processing parameters in AMCs

(2013) Ali Mazahery et al.   POWDER TECHNOLOGY

Good bonding between coated B4C particles and aluminum matrix fabricated by semisolid techniques

(2013) Mohsen Ostad Shabani et al.   Russian Journal of Non-Ferrous Metals

Ascending Order of Enhancement in Sliding Wear Behavior and Tensile Strength of the Compocast Aluminum Matrix Composites

(2013) Ali Mazahery et al.   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS

Optimized processing power and trainability of neural network in numerical modeling of Al Matrix nano composites

(2013) Ali Asghar Tofigh et al.   Journal of Manufacturing Processes

Optimization of process conditions in casting aluminum matrix composites via interconnection of artificial neurons and progressive solutions

(2012) Mohsen Ostad Shabani et al.   CERAMICS INTERNATIONAL

Application of GA to optimize the process conditions of Al Matrix nano-composites

(2012) Mohsen Ostad Shabani et al.   COMPOSITES PART B-ENGINEERING

A mathematical model for prediction of microporosity in aluminum alloy A356

(2012) Ahmad Bahmani et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

The enhancement of wear properties of squeeze-cast A356 composites reinforced with B4C particulates

(2012) Ali Mazahery et al.   International Journal of Materials Research

Concurrent fitness evaluations in searching for the optimal process conditions of Al matrix nanocomposites by linearly decreasing weight

(2012) Ali Mazahery et al.   JOURNAL OF COMPOSITE MATERIALS

Synthesis of TiC Master Alloy in Nanometer Scale by Mechanical Milling

(2012) Mansour Razavi et al.   MATERIALS AND MANUFACTURING PROCESSES

Intelligent Modeling Using Adaptive Neuro Fuzzy Inference System (ANFIS) for Predicting Weld Bead Shape Parameters During A-TIG Welding of Reduced Activation Ferritic-Martensitic (RAFM) Steel

(2012) S. Vishnuvaradhan et al.   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS

Suppression of Segregation, Settling and Agglomeration in Mechanically Processed Composites Fabricated by a Semisolid Agitation Processes

(2012) Mohsen Ostad Shabani et al.   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS

Study of Tribological and Mechanical Properties of A356–Nano SiC Composites

(2012) Ali Mazahery et al.   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS

A comparative study on abrasive wear behavior of semisolid–liquid processed Al–Si matrix reinforced with coated B4C reinforcement

(2012) Ali Mazahery et al.   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS

Prediction of Mechanical Properties of Cast A356 Alloy as a Function of Microstructure and Cooling Rate

(2011) M. Shabani et al.   ARCHIVES OF METALLURGY AND MATERIALS

Production and wear characterisation of AA 6061 matrix titanium carbide particulate reinforced composite by enhanced stir casting method

(2011) S. Gopalakrishnan et al.   COMPOSITES PART B-ENGINEERING

Modelling of mechanical properties of cast A356 alloy

(2011) M. O. SHABANI et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

Silicon morphology modelling during solidification process of A356 Al alloy

(2011) M O Shabani et al.   INTERNATIONAL JOURNAL OF CAST METALS RESEARCH

Sol–gel coated B4C particles reinforced 2024 Al matrix composites

(2011) A Mazahery et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS

Synthesis of Fe–TiC–Al2O3 hybrid nanocomposite via carbothermal reduction enhanced by mechanical activation

(2010) Mansour Razavi et al.   CERAMICS INTERNATIONAL