期刊
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY
卷 15, 期 2, 页码 307-314出版社
WILEY
DOI: 10.1111/ijac.12828
关键词
joints/joining; processing; solid oxide fuel cell; tape casting
This study presents preliminary results for tubular anode-supported solid oxide fuel cells (SOFCs) fabricated by a novel method based on tape casting. A multilayer tape cast was prepared by successive casting of the anode support, anode functional layer, and electrolyte. The tape cast was rolled into a tube, and the ends of the tape were joined by solvent-assisted lamination. The sample was co-fired at 1400 degrees C, followed by screen printing and sintering of the cathode at 1150 degrees C. The electrochemical performance of the tubular cell was evaluated in N-2/H-2 gas at 750 degrees C. The cell generated a maximum power density of 90 mW/cm(2). The scanning electron microscope (SEM) micrographs after the electrochemical tests confirmed that the solvent-assisted lamination resulted in stable joining without delamination. Although the process and performance have yet to be optimized, the use of multilayer tape casting, solvent-assisted lamination, and co-firing is expected to make this method advantageous for low-cost mass production of tubular SOFCs.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据