Highly efficient polymer solar cells with printed photoactive layer: rational process transfer from spin-coating

Vertical Phase Separation in Small Molecule:Polymer Blend Organic Thin Film Transistors Can Be Dynamically Controlled

(2016) Kui Zhao et al.   ADVANCED FUNCTIONAL MATERIALS

Morphology changes upon scaling a high-efficiency, solution-processed solar cell

(2016) Hyun Wook Ro et al.   Energy & Environmental Science

A series connection architecture for large-area organic photovoltaic modules with a 7.5% module efficiency

(2016) Soonil Hong et al.   Nature Communications

Efficient organic solar cells processed from hydrocarbon solvents

(2016) Jingbo Zhao et al.   Nature Energy

Contact-Induced Nucleation in High-Performance Bottom-Contact Organic Thin Film Transistors Manufactured by Large-Area Compatible Solution Processing

(2015) Muhammad R. Niazi et al.   ADVANCED FUNCTIONAL MATERIALS

Air-processed polymer tandem solar cells with power conversion efficiency exceeding 10%

(2015) Ning Li et al.   Energy & Environmental Science

Fully printed organic tandem solar cells using solution-processed silver nanowires and opaque silver as charge collecting electrodes

(2015) Fei Guo et al.   Energy & Environmental Science

Enhanced efficiency of polymer solar cells by adding a high-mobility conjugated polymer

(2015) Shenghua Liu et al.   Energy & Environmental Science

Photoconductive Cathode Interlayer for Highly Efficient Inverted Polymer Solar Cells

(2015) Li Nian et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Large-area organic solar cells by accelerated blade coating

(2015) Pei-Ting Tsai et al.   ORGANIC ELECTRONICS

Organic Photovoltaic Cells: From Performance Improvement to Manufacturing Processes

(2015) Hongseok Youn et al.   Small

From spin coating to doctor blading: A systematic study on the photovoltaic performance of an isoindigo-based polymer

(2015) Kang Xiong et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

A real-time study of the benefits of co-solvents in polymer solar cell processing

(2015) Jacobus J. van Franeker et al.   Nature Communications

Flow-enhanced solution printing of all-polymer solar cells

(2015) Ying Diao et al.   Nature Communications

Polymer Solar Cells with Efficiency >10% Enabled via a Facile Solution-Processed Al-Doped ZnO Electron Transporting Layer

(2015) Lethy Krishnan Jagadamma et al.   Advanced Energy Materials

The interplay between structure, processing, and properties in organic photovoltaic devices: how to translate recent laboratory-scale developments to modules

(2015) Caroline Grand et al.   MRS Communications

Entanglements in marginal solutions: a means of tuning pre-aggregation of conjugated polymers with positive implications for charge transport

(2015) Hanlin Hu et al.   Journal of Materials Chemistry C

Bulk Heterojunction Solar Cells: Morphology and Performance Relationships

(2014) Ye Huang et al.   CHEMICAL REVIEWS

Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules

(2014) Thomas R. Andersen et al.   Energy & Environmental Science

Large scale deployment of polymer solar cells on land, on sea and in the air

(2014) Nieves Espinosa et al.   Energy & Environmental Science

Effects of Thermal Annealing and Solvent Annealing on the Morphologies and Properties of Poly(3-hexylthiophene) Nanowires

(2014) Chuan-Min Fu et al.   MACROMOLECULAR CHEMISTRY AND PHYSICS

One-dimensional self-confinement promotes polymorph selection in large-area organic semiconductor thin films

(2014) Gaurav Giri et al.   Nature Communications

Enabling Flexible Polymer Tandem Solar Cells by 3D Ptychographic Imaging

(2014) Henrik F. Dam et al.   Advanced Energy Materials

Environmentally Printing Efficient Organic Tandem Solar Cells with High Fill Factors: A Guideline Towards 20% Power Conversion Efficiency

(2014) Ning Li et al.   Advanced Energy Materials

Efficient inverted bulk-heterojunction solar cells from low-temperature processing of amorphous ZnO buffer layers

(2014) Lethy Krishnan Jagadamma et al.   Journal of Materials Chemistry A

Towards industrialization of polymer solar cells: material processing for upscaling

(2014) Ignasi Burgués-Ceballos et al.   Journal of Materials Chemistry A

Entanglement of Conjugated Polymer Chains Influences Molecular Self-Assembly and Carrier Transport

(2013) Kui Zhao et al.   ADVANCED FUNCTIONAL MATERIALS

Spin-Cast Bulk Heterojunction Solar Cells: A Dynamical Investigation

(2013) Kang Wei Chou et al.   ADVANCED MATERIALS

Controlling the Morphology and Performance of Bulk Heterojunctions in Solar Cells. Lessons Learned from the Benchmark Poly(3-hexylthiophene):[6,6]-Phenyl-C61-butyric Acid Methyl Ester System

(2013) Minh Trung Dang et al.   CHEMICAL REVIEWS

Additives for morphology control in high-efficiency organic solar cells

(2013) Hsueh-Chung Liao et al.   Materials Today

Effect of Processing Additives on the Solidification of Blade-Coated Polymer/Fullerene Blend Films via In-Situ Structure Measurements

(2013) Nayool Shin et al.   Advanced Energy Materials

Upscaling from single cells to modules – fabrication of vacuum- and ITO-free polymer solar cells on flexible substrates with long lifetime

(2013) Jon E. Carlé et al.   Journal of Materials Chemistry C

In situ UV-visible absorption during spin-coating of organic semiconductors: a new probe for organic electronics and photovoltaics

(2013) Maged Abdelsamie et al.   Journal of Materials Chemistry C

The relative importance of domain size, domain purity and domain interfaces to the performance of bulk-heterojunction organic photovoltaics

(2012) Benjamin P. Lyons et al.   Energy & Environmental Science

On the morphology of polymer-based photovoltaics

(2012) Feng Liu et al.   JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS

Roll-to-roll fabrication of polymer solar cells

(2012) Roar Søndergaard et al.   Materials Today

Highly efficient inverted rapid-drying blade-coated organic solar cells

(2012) Jung-Hao Chang et al.   ORGANIC ELECTRONICS

Look fast: Crystallization of conjugated molecules during solution shearing probedin-situand in real time by X-ray scattering

(2012) Detlef-M. Smilgies et al.   Physica Status Solidi-Rapid Research Letters

High performance organic photovoltaic cells with blade-coated active layers

(2012) Siew-Lay Lim et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Absolute Measurement of Domain Composition and Nanoscale Size Distribution Explains Performance in PTB7:PC71BM Solar Cells

(2012) Brian A. Collins et al.   Advanced Energy Materials

Moving through the Phase Diagram: Morphology Formation in Solution Cast Polymer–Fullerene Blend Films for Organic Solar Cells

(2011) Benjamin Schmidt-Hansberg et al.   ACS Nano

Molecular Order in High-Efficiency Polymer/Fullerene Bulk Heterojunction Solar Cells

(2011) Matthew R. Hammond et al.   ACS Nano

In Situ X-Ray Study of Drying-Temperature Influence on the Structural Evolution of Bulk-Heterojunction Polymer-Fullerene Solar Cells Processed by Doctor-Blading

(2011) Monamie Sanyal et al.   Advanced Energy Materials

Microstructural Characterization and Charge Transport in Thin Films of Conjugated Polymers

(2010) Alberto Salleo et al.   ADVANCED MATERIALS

A Facile Route to Polymer Solar Cells with Optimum Morphology Readily Applicable to a Roll-to-Roll Process without Sacrificing High Device Performances

(2010) Hui Joon Park et al.   ADVANCED MATERIALS

For the Bright Future-Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%

(2010) Yongye Liang et al.   ADVANCED MATERIALS

Landau–Levich menisci

(2010) M. Maleki et al.   JOURNAL OF COLLOID AND INTERFACE SCIENCE

Single Crystals of Polythiophene with Different Molecular Conformations Obtained by Tetrahydrofuran Vapor Annealing and Controlling Solvent Evaporation

(2010) Xinli Xiao et al.   JOURNAL OF PHYSICAL CHEMISTRY B

Upscaling of polymer solar cell fabrication using full roll-to-roll processing

(2010) Frederik C. Krebs et al.   Nanoscale

Morphology Control in Solution-Processed Bulk-Heterojunction Solar Cell Mixtures

(2009) Adam J. Moulé et al.   ADVANCED FUNCTIONAL MATERIALS

In situ monitoring the drying kinetics of knife coated polymer-fullerene films for organic solar cells

(2009) B. Schmidt-Hansberg et al.   JOURNAL OF APPLIED PHYSICS

Fast-Grown Interpenetrating Network in Poly(3-hexylthiophene): Methanofullerenes Solar Cells Processed with Additive

(2009) Hsiang-Yu Chen et al.   Journal of Physical Chemistry C

Polymer solar cell by blade coating

(2009) Yu-Han Chang et al.   ORGANIC ELECTRONICS

Effects of Solvent Mixtures on the Nanoscale Phase Separation in Polymer Solar Cells

(2008) Yan Yao et al.   ADVANCED FUNCTIONAL MATERIALS

Fabrication and processing of polymer solar cells: A review of printing and coating techniques

(2008) Frederik C. Krebs   SOLAR ENERGY MATERIALS AND SOLAR CELLS