An overview of 3D printed metal implants in orthopedic applications: Present and future perspectives
出版年份 2023 全文链接
标题
An overview of 3D printed metal implants in orthopedic applications: Present and future perspectives
作者
关键词
-
出版物
Heliyon
Volume 9, Issue 7, Pages e17718
出版商
Elsevier BV
发表日期
2023-06-30
DOI
10.1016/j.heliyon.2023.e17718
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Laser Additive Manufacturing of Zinc Targeting for Biomedical Application
- (2022) Yan Zhou et al. International Journal of Bioprinting
- Preliminary Investigation on the Geometric Accuracy of 3D Printed Dental Implant Using a Monkey Maxilla Incisor Model
- (2022) Yuchun Liu et al. International Journal of Bioprinting
- Reconstruction of the cervical lateral mass using 3D-printed prostheses
- (2022) Qiang Jian et al. Neurospine
- Biodegradable iron-silicon implants produced by additive manufacturing
- (2022) J V Bondareva et al. Biomedical Materials
- Regenerative matching axial vascularisation of absorbable 3D-printed scaffold for large bone defects: A first in human series
- (2022) George Castrisos et al. Journal of Plastic Reconstructive and Aesthetic Surgery
- Design of a biomimetic graded TPMS scaffold with quantitatively adjustable pore size
- (2022) Junfang Zhang et al. MATERIALS & DESIGN
- 3D gel-printed porous magnesium scaffold coated with dibasic calcium phosphate dihydrate for bone repair in vivo
- (2022) Yuxuan Zhang et al. Journal of Orthopaedic Translation
- In situ grown rare earth lanthanum on carbon nanofibre for interfacial reinforcement in Zn implants
- (2022) Mingli Yang et al. Virtual and Physical Prototyping
- Additively Manufactured Multi-Morphology Bone-like Porous Scaffolds: Experiments and Micro-Computed Tomography-Based Finite Element Modeling Approaches
- (2022) Reza Noroozi et al. International Journal of Bioprinting
- Efficacy and safety of a 3D-printed arthrodesis prosthesis for reconstruction after resection of the proximal humerus: preliminary outcomes with a minimum 2-year follow-up
- (2022) Haijie Liang et al. BMC MUSCULOSKELETAL DISORDERS
- Corrosion fatigue behavior and anti-fatigue mechanisms of an additively manufactured biodegradable zinc-magnesium gyroid scaffold
- (2022) Danlei Zhao et al. Acta Biomaterialia
- Long-term functional recovery in patients with custom-made 3D-printed anatomical pelvic prostheses following bone tumor excision
- (2022) Giordano Valente et al. GAIT & POSTURE
- Effective compressive behavior of functionally graded TPMS titanium implants with ingrown cortical or trabecular bone
- (2022) N.V. Viet et al. COMPOSITE STRUCTURES
- Three dimension printing talar prostheses for total replacement in talar necrosis and collapse
- (2021) Mi duo Mu et al. INTERNATIONAL ORTHOPAEDICS
- 3D-Printed Ti6Al4V Scaffolds with Graded Triply Periodic Minimal Surface Structure for Bone Tissue Engineering
- (2021) Bo Liao et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effects of morphological characteristics on the mechanical behavior of 3D printed ordered pore topological Fe scaffold
- (2021) Dipesh Kumar Mishra et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A Protocol for the Use of a Combined Microvascular Free Flap with Custom-Made 3D-Printed Total Temporomandibular Joint (TMJ) Prosthesis for Mandible Reconstruction in Children
- (2021) Krzysztof Dowgierd et al. Applied Sciences-Basel
- Additive manufacturing of shape memory alloys: A review with emphasis on powder bed systems
- (2021) Ali N. Alagha et al. MATERIALS & DESIGN
- STL-free design and manufacturing paradigm for high-precision powder bed fusion
- (2021) Junhao Ding et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Minimum 7‐year Follow‐up of A Porous Coated Trabecular Titanium Cup Manufactured with Electron Beam Melting Technique in Primary Total Hip Arthroplasty
- (2021) Yong Huang et al. Orthopaedic Surgery
- A prospective study on outcome of patient-specific cones in revision knee arthroplasty
- (2021) Alexander A. Cherny et al. ARCHIVES OF ORTHOPAEDIC AND TRAUMA SURGERY
- A personalized 3D-printed plate for tibiotalocalcaneal arthrodesis: Design, fabrication, biomechanical evaluation and postoperative assessment
- (2021) Yan Yao et al. COMPUTERS IN BIOLOGY AND MEDICINE
- A 3D Printed Model of a Titanium Custom-Made Talus for the Treatment of a Chronic Infection of the Ankle
- (2021) Daniel Grau et al. Journal of Foot & Ankle Surgery
- Use of three-dimensional–printed custom-made prosthesis to treat unicondylar femoral defect secondary to pathological fracture caused by giant cell tumor
- (2021) Yuqing Ji et al. JOURNAL OF INTERNATIONAL MEDICAL RESEARCH
- Topological design and biomechanical evaluation for 3D printed multi-segment artificial vertebral implants
- (2021) Jianfeng Kang et al. Materials Science & Engineering C-Materials for Biological Applications
- Mid‐ and Long‐Term Follow‐Up Efficacy Analysis of 3D ‐Printed Interbody Fusion Cages for Anterior Cervical Discectomy and Fusion
- (2021) Yuan‐zhang Jin et al. Orthopaedic Surgery
- Clinical study of 3D printed personalized prosthesis in the treatment of bone defect after pelvic tumor resection
- (2021) Lin Xu et al. Journal of Orthopaedic Translation
- Total hip revision with custom-made spacer and prosthesis: A case report
- (2021) Yang-Bo Liu et al. World Journal of Clinical Cases
- Preclinical Evaluation of a Novel 3D-Printed Movable Lumbar Vertebral Complex for Replacement: In Vivo and Biomechanical Evaluation of Goat Model
- (2021) Feng Zhang et al. Biomed Research International
- Corrosion fatigue behavior of additively manufactured biodegradable porous zinc
- (2020) Y. Li et al. Acta Biomaterialia
- Three‐dimensional‐printed intercalary prosthesis for the reconstruction of large bone defect after joint‐preserving tumor resection
- (2020) Weijian Liu et al. JOURNAL OF SURGICAL ONCOLOGY
- Finite element analysis of bone and implant stresses for customized 3D-printed orthopaedic implants in fracture fixation
- (2020) Lina Yan et al. MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING
- Mechanical properties and cytocompatibility of dense and porous Zn produced by laser powder bed fusion for biodegradable implant applications
- (2020) Karel Lietaert et al. Acta Biomaterialia
- The application of 3D-printing technology in pelvic bone tumor surgery
- (2020) Jong Woong Park et al. JOURNAL OF ORTHOPAEDIC SCIENCE
- Porous zinc scaffolds for bone tissue engineering applications: A novel additive manufacturing and casting approach
- (2020) Irsalan Cockerill et al. Materials Science & Engineering C-Materials for Biological Applications
- Mechanical behaviour of 3D printed ordered pore topological iron scaffold
- (2020) Dipesh Kumar Mishra et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Individuelle Revisionsendoprothetik am Kniegelenk
- (2020) Max Ettinger et al. ORTHOPADE
- 3D printed composite scaffolds with dual small molecule delivery for mandibular bone regeneration
- (2020) Wenhai Zhang et al. Biofabrication
- Cumulative Inaccuracies in Implementation of Additive Manufacturing Through Medical Imaging, 3D Thresholding, and 3D Modeling: A Case Study for an End-Use Implant
- (2020) Jan Sher Akmal et al. Applied Sciences-Basel
- Varisized 3D ‐Printed Lunate for Kienböck's Disease in Different Stages: Preliminary Results
- (2020) Zhen‐jiang Ma et al. Orthopaedic Surgery
- Multi-material additive manufacturing technologies for Ti-, Mg-, and Fe-based biomaterials for bone substitution
- (2020) N.E. Putra et al. Acta Biomaterialia
- Solvent-cast 3D printing of magnesium scaffolds
- (2020) J. Dong et al. Acta Biomaterialia
- Patient- and clinician-reported outcomes of lower jaw contouring using patient-specific 3D-printed titanium implants
- (2020) M.Y. Mommaerts INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY
- An innovative strategy to treat large metaphyseal segmental femoral bone defect using customized design and 3D printed micro-porous prosthesis: a prospective clinical study
- (2020) Guojin Hou et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Recent developments in polymers/polymer nanocomposites for additive manufacturing
- (2020) H. Wu et al. PROGRESS IN MATERIALS SCIENCE
- Selective Laser Melting of Ti-6Al-4V: The Impact of Post-processing on the Tensile, Fatigue and Biological Properties for Medical Implant Applications
- (2020) Parastoo Jamshidi et al. Materials
- Custom three-dimensional printed orbital plate composed of two joined parts with variable thickness for a large orbital floor reconstruction after post-traumatic zygomatic fixation
- (2020) A. Gonzalez Alvarez et al. BRITISH JOURNAL OF ORAL & MAXILLOFACIAL SURGERY
- Mechanical properties and osteoblast proliferation of complex porous dental implants filled with magnesium alloy based on 3D printing
- (2020) Xuetao Zhang et al. JOURNAL OF BIOMATERIALS APPLICATIONS
- Total Ankle Total Talus Replacement Using a 3D Printed Talus Component: A Case Report
- (2020) Craig C. Akoh et al. Journal of Foot & Ankle Surgery
- Three‐dimensional ( 3D) ‐printed titanium sternum replacement: A case report
- (2020) Wenzhang Wang et al. Thoracic Cancer
- Immobilizing magnesium ions on 3D printed porous tantalum scaffolds with polydopamine for improved vascularization and osteogenesis
- (2020) Limin Ma et al. Materials Science & Engineering C-Materials for Biological Applications
- Reconstruction of Bony Defects after Tumor Resection with 3D-Printed Anatomically Conforming Pelvic Prostheses through a Novel Treatment Strategy
- (2020) Wei Peng et al. Biomed Research International
- Endoscopic Treatment of Symptomatic Foot and Ankle Bone Cyst with 3D Printing Application
- (2020) Changgui Zhang et al. Biomed Research International
- Application of Titanium Alloy 3D-Printed Artificial Vertebral Body for Stage III Kümmell’s Disease Complicated by Neurological Deficits
- (2020) Chunke Dong et al. Clinical Interventions in Aging
- Complete Osseointegration of a Retrieved 3-D Printed Porous Titanium Cervical Cage
- (2020) Wimar van den Brink et al. Frontiers in Surgery
- Porous structure design and mechanical behavior analysis based on TPMS for customized root analogue implant
- (2020) Kaile Song et al. Journal of the Mechanical Behavior of Biomedical Materials
- Clinical and radiological outcomes of Chinese customized three-dimensionally printed total temporomandibular joint prostheses: A prospective case series study
- (2020) Xuzhuo Chen et al. Journal of Plastic Reconstructive and Aesthetic Surgery
- Total Replacement of Varus Ankle
- (2019) Beat Hintermann et al. Foot and Ankle Clinics
- A three-dimensional printed porous implant combined with bone grafting following curettage of a subchondral giant cell tumour of the proximal tibia: a case report
- (2019) Minxun Lu et al. BMC Surgery
- An innovative total temporomandibular joint prosthesis with customized design and 3D printing additive fabrication: a prospective clinical study
- (2019) JiSi Zheng et al. Journal of Translational Medicine
- Enhanced osteogenic differentiation of human bone–derived mesenchymal stem cells in 3-dimensional printed porous titanium scaffolds by static magnetic field through up-regulating Smad4
- (2019) Yu He et al. FASEB JOURNAL
- 3D printed titanium prosthesis reconstruction following subtotal maxillectomy for myoepithelial carcinoma – a case report
- (2019) ME Roos et al. Journal of Stomatology Oral and Maxillofacial Surgery
- A Stable Impedance-Matched Ultrawideband Antenna System Mitigating Detuning Effects for Multiple Biotelemetric Applications
- (2019) Abdul Basir et al. IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION
- Laser additive manufacturing of Zn metal parts for biodegradable implants: Effect of gas flow on evaporation and formation quality
- (2019) Yanzhe Chen et al. JOURNAL OF LASER APPLICATIONS
- A COMPUTATIONAL STUDY OF DIFFERENT ADDITIVE MANUFACTURING-BASED TOTAL ANKLE REPLACEMENT DEVICES USING THREE-DIMENSIONAL HUMAN LOWER EXTREMITY MODELS WITH VARIOUS ANKLE POSTURES
- (2019) PRIMASARI WARDHANI et al. Journal of Mechanics in Medicine and Biology
- 3D-Druck in der unfallchirurgischen Fort- und Weiterbildung
- (2019) Simon Weidert et al. UNFALLCHIRURG
- Pore functionally graded Ti6Al4V scaffolds for bone tissue engineering application
- (2019) Su Wang et al. MATERIALS & DESIGN
- Additive manufacturing of magnesium–zinc–zirconium (ZK) alloys via capillary-mediated binderless three-dimensional printing
- (2019) Mojtaba Salehi et al. MATERIALS & DESIGN
- Additively manufactured functionally graded biodegradable porous iron
- (2019) Y. Li et al. Acta Biomaterialia
- Corrosion behaviour of the porous iron scaffold in simulated body fluid for biodegradable implant application
- (2019) Pawan Sharma et al. Materials Science & Engineering C-Materials for Biological Applications
- Application of a three-dimensional printed segmental scapula prosthesis in the treatment of scapula tumors
- (2019) Linglong Deng et al. JOURNAL OF INTERNATIONAL MEDICAL RESEARCH
- Micro-CT based finite element modelling and experimental characterization of the compressive mechanical properties of 3-D zirconia scaffolds for bone tissue engineering
- (2019) E. Askari et al. Journal of the Mechanical Behavior of Biomedical Materials
- Microstructure evolution of the rapidly solidified alloy powders and composite powders
- (2019) Q. Yang et al. MATERIALS & DESIGN
- Four-dimensional bioprinting: Current developments and applications in bone tissue engineering
- (2019) Zhuqing Wan et al. Acta Biomaterialia
- Controlled release of BMP-2 from titanium with electrodeposition modification enhancing critical size bone formation
- (2019) Fu-Yuan Teng et al. Materials Science & Engineering C-Materials for Biological Applications
- 3D printed dual-functional biomaterial with self-assembly micro-nano surface and enriched nano argentum for antibacterial and bone regeneration
- (2019) Jiayi Li et al. Applied Materials Today
- Surface modification of biomaterials and biomedical devices using additive manufacturing
- (2018) Susmita Bose et al. Acta Biomaterialia
- Functionally graded multilayer scaffolds for in vivo osteochondral tissue engineering
- (2018) Heemin Kang et al. Acta Biomaterialia
- Fast and sensitive near-infrared fluorescent probes for ALP detection and 3d printed calcium phosphate scaffold imaging in vivo
- (2018) Chul Soon Park et al. BIOSENSORS & BIOELECTRONICS
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- Finite element model predicts the biomechanical performance of transforaminal lumbar interbody fusion with various porous additive manufactured cages
- (2018) Zhenjun Zhang et al. COMPUTERS IN BIOLOGY AND MEDICINE
- Use of Patient-Specific 3D-Printed Titanium Implants for Complex Foot and Ankle Limb Salvage, Deformity Correction, and Arthrodesis Procedures
- (2018) Travis J. Dekker et al. FOOT & ANKLE INTERNATIONAL
- Preliminary Results of a 3D-Printed Acetabular Component in the Management of Extensive Defects
- (2018) Mustafa Citak et al. Hip International
- Fundamental analysis of the influence of powder characteristics in Selective Laser Melting of molybdenum based on a multi-physical simulation model
- (2018) K.-H. Leitz et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Evaluation of bone marrow stem cell response to PLA scaffolds manufactured by 3D printing and coated with polydopamine and type I collagen
- (2018) Bruna Nunes Teixeira et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Craniomaxillofacial patient-specific CAD/CAM implants based on cone-beam tomography data – A feasibility study
- (2018) Oliver C. Thiele et al. JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY
- Factors Influencing Postsurgical Diplopia in Orbital Floor Fractures and Prevalence of Other Complications in a Series of Cases
- (2018) Marina Alexandra Gavin Clavero et al. JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY
- Osteogenesis of 3D printed porous Ti6Al4V implants with different pore sizes
- (2018) Qichun Ran et al. Journal of the Mechanical Behavior of Biomedical Materials
- Continuous functionally graded porous titanium scaffolds manufactured by selective laser melting for bone implants
- (2018) Changjun Han et al. Journal of the Mechanical Behavior of Biomedical Materials
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Vertebral body replacement using patient-specific three–dimensional-printed polymer implants in cervical spondylotic myelopathy: an encouraging preliminary report
- (2018) Aymeric Amelot et al. Spine Journal
- From ideas to long-term studies: 3D printing clinical trials review
- (2018) Jan Witowski et al. International Journal of Computer Assisted Radiology and Surgery
- Heat treatment effect on the mechanical properties, roughness and bone ingrowth capacity of 3D printing porous titanium alloy
- (2018) Zuhao Li et al. RSC Advances
- Additive manufacturing technique-designed metallic porous implants for clinical application in orthopedics
- (2018) Chaohua Gao et al. RSC Advances
- Biocompatibility of Bespoke 3D-Printed Titanium Alloy Plates for Treating Acetabular Fractures
- (2018) Xuezhi Lin et al. Biomed Research International
- Micro- and nano-structured 3D printed titanium implants with a hydroxyapatite coating for improved osseointegration
- (2018) Jie Qin et al. Journal of Materials Chemistry B
- 3D Printed Fe Scaffolds with HA Nanocoating for Bone Regeneration
- (2018) Chen Yang et al. ACS Biomaterials-Science & Engineering
- Polydopamine-assisted functionalization of heparin and vancomycin onto microarc-oxidized 3D printed porous Ti6Al4V for improved hemocompatibility, osteogenic and anti-infection potencies
- (2018) Teng Zhang et al. Science China-Materials
- Uncemented three-dimensional-printed prosthetic replacement for giant cell tumor of distal radius: a new design of prosthesis and surgical techniques
- (2018) Minxun Lu et al. Cancer Management and Research
- 3D Printed Fe Scaffolds with HA Nanocoating for Bone Regeneration
- (2018) Chen Yang et al. ACS Biomaterials Science & Engineering
- Biomimetic 3D-printed custom-made prosthesis for anterior column reconstruction in the thoracolumbar spine: a tailored option following en bloc resection for spinal tumors
- (2018) Marco Girolami et al. EUROPEAN SPINE JOURNAL
- The effect of 3D-printed Ti6Al4V scaffolds with various macropore structures on osteointegration and osteogenesis: A biomechanical evaluation
- (2018) Han Wang et al. Journal of the Mechanical Behavior of Biomedical Materials
- 3D Culture of Bone Marrow-Derived Mesenchymal Stem Cells (BMSCs) Could Improve Bone Regeneration in 3D-Printed Porous Ti6Al4V Scaffolds
- (2018) Lingjia Yu et al. Stem Cells International
- Effect of porosity variation strategy on the performance of functionally graded Ti-6Al-4V scaffolds for bone tissue engineering
- (2018) Xiang-Yu Zhang et al. MATERIALS & DESIGN
- Structural design and mechanical response of gradient porous Ti-6Al-4V fabricated by electron beam additive manufacturing
- (2018) Y.C. Wu et al. MATERIALS & DESIGN
- Morphological and mechanical characterization of topologically ordered open cell porous iron foam fabricated using 3D printing and pressureless microwave sintering
- (2018) Pawan Sharma et al. MATERIALS & DESIGN
- Enhancedin vitrobiocompatibility and osteogenesis of titanium substrates immobilized with dopamine-assisted superparamagnetic Fe3O4nanoparticles for hBMSCs
- (2018) Zhenfei Huang et al. Royal Society Open Science
- Latissimus dorsi rotational flap combined with a custom-made scapular prosthesis after oncological surgical resection: a report of two patients
- (2018) Giovanni Beltrami et al. BMC CANCER
- Additive Manufacturing for Guided Bone Regeneration: A Perspective for Alveolar Ridge Augmentation
- (2018) Patrick Rider et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Novel 3D Printed Modular Hemipelvic Prosthesis for Successful Hemipelvic Arthroplasty: A Case Study
- (2018) Xin Zhao et al. Journal of Bionic Engineering
- Three Dimensional Printed Bone Implants in the Clinic
- (2018) Nazzar Tellisi et al. JOURNAL OF CRANIOFACIAL SURGERY
- A NEW COMPREHENSIVE PROCEDURE FOR CUSTOM‐MADE TOTAL ANKLE REPLACEMENTS: MEDICAL IMAGING, JOINT MODELING, PROSTHESIS DESIGN, AND 3D PRINTING
- (2018) Claudio Belvedere et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- Additive Manufacturing in Total Joint Arthroplasty
- (2018) Sneha Prabha Narra et al. ORTHOPEDIC CLINICS OF NORTH AMERICA
- What we have achieved in the design of 3D printed metal implants for application in orthopedics? Personal experience and review
- (2018) Zuhao Li et al. RAPID PROTOTYPING JOURNAL
- Regulating 3D-printed medical products
- (2018) Laura M. Ricles et al. Science Translational Medicine
- A paradigm shift towards compositionally zero-sum binderless 3D printing of magnesium alloys via capillary-mediated bridging
- (2018) Mojtaba Salehi et al. ACTA MATERIALIA
- Use of a three-dimensional custom-made porous titanium prosthesis for mandibular body reconstruction
- (2017) Q. Qassemyar et al. INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY
- Design and fabrication of graduated porous Ti-based alloy implants for biomedical applications
- (2017) Jianping Shi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Development and Verification of Novel Porous Titanium Metaphyseal Cones for Revision Total Knee Arthroplasty
- (2017) Ahmad Faizan et al. JOURNAL OF ARTHROPLASTY
- Experimental evaluation of a new morphological approximation of the articular surfaces of the ankle joint
- (2017) Claudio Belvedere et al. JOURNAL OF BIOMECHANICS
- The utility of 3D printing for surgical planning and patient-specific implant design for complex spinal pathologies: case report
- (2017) Ralph J. Mobbs et al. JOURNAL OF NEUROSURGERY-SPINE
- A method for using solid modeling CAD software to create an implant library for the fabrication of a custom abutment
- (2017) Jing Zhang et al. JOURNAL OF PROSTHETIC DENTISTRY
- Fatigue behaviour of NiTi shape memory alloy scaffolds produced by SLM, a unit cell design comparison
- (2017) M. Speirs et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical properties and biocompatibility of porous titanium scaffolds for bone tissue engineering
- (2017) Yunhui Chen et al. Journal of the Mechanical Behavior of Biomedical Materials
- 3D-printing zirconia implants; a dream or a reality? An in-vitro study evaluating the dimensional accuracy, surface topography and mechanical properties of printed zirconia implant and discs
- (2017) Reham B. Osman et al. Journal of the Mechanical Behavior of Biomedical Materials
- Three-dimensional-printed upper limb prosthesis for a child with traumatic amputation of right wrist
- (2017) Guisheng Xu et al. MEDICINE
- The use of 3D-printed titanium mesh tray in treating complex comminuted mandibular fractures
- (2017) Junli Ma et al. MEDICINE
- Application of 3D printing for treating fractures of both columns of the acetabulum: Benefit of pre-contouring plates on the mirrored healthy pelvis
- (2017) P. Upex et al. Orthopaedics & Traumatology-Surgery & Research
- A 3D-printed osseointegrated combined jaw and dental implant prosthesis – a case study
- (2017) Santosh Kumar Malyala et al. RAPID PROTOTYPING JOURNAL
- Assessment of Embedded Conjugated Polymer Sensor Arrays for Potential Load Transmission Measurement in Orthopaedic Implants
- (2017) Carolina Micolini et al. SENSORS
- Multilevel 3D Printing Implant for Reconstructing Cervical Spine With Metastatic Papillary Thyroid Carcinoma
- (2017) Xiucan Li et al. SPINE
- Sacral Reconstruction with a 3D-Printed Implant after Hemisacrectomy in a Patient with Sacral Osteosarcoma: 1-Year Follow-Up Result
- (2017) Doyoung Kim et al. YONSEI MEDICAL JOURNAL
- 3D printing technology used in severe hip deformity
- (2017) Shanshan Wang et al. Experimental and Therapeutic Medicine
- Reconstruction of Thoracic Spine Using a Personalized 3D-Printed Vertebral Body in Adolescent with T9 Primary Bone Tumor
- (2017) Wen Jie Choy et al. World Neurosurgery
- Design and Structure-Function Characterization of 3D Printed Synthetic Porous Biomaterials for Tissue Engineering
- (2017) Cambre N. Kelly et al. Advanced Healthcare Materials
- Reconstruction with 3D-printed pelvic endoprostheses after resection of a pelvic tumour
- (2017) H. Liang et al. Bone & Joint Journal
- Effects of bone substitute architecture and surface properties on cell response, angiogenesis, and structure of new bone
- (2017) F. S. L. Bobbert et al. Journal of Materials Chemistry B
- Improved fatigue endurance ratio of additive manufactured Ti-6Al-4V lattice by hot isostatic pressing
- (2017) Ming-Wei Wu et al. MATERIALS & DESIGN
- Fabrication of multiple-layered gradient cellular metal scaffold via electron beam melting for segmental bone reconstruction
- (2017) Maria A. Surmeneva et al. MATERIALS & DESIGN
- Oncological and surgical outcome after treatment of pelvic sarcomas
- (2017) Stephan E. Puchner et al. PLoS One
- 3D printed personalized titanium plates improve clinical outcome in microwave ablation of bone tumors around the knee
- (2017) Limin Ma et al. Scientific Reports
- Tailored Surface Treatment of 3D Printed Porous Ti6Al4V by Microarc Oxidation for Enhanced Osseointegration via Optimized Bone In-Growth Patterns and Interlocked Bone/Implant Interface
- (2016) Peng Xiu et al. ACS Applied Materials & Interfaces
- Binder-jetting 3D printing and alloy development of new biodegradable Fe-Mn-Ca/Mg alloys
- (2016) Daeho Hong et al. Acta Biomaterialia
- High-strength porous biomaterials for bone replacement: A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints
- (2016) Sajad Arabnejad et al. Acta Biomaterialia
- Additive Manufacturing of Biomaterials, Tissues, and Organs
- (2016) Amir A. Zadpoor et al. ANNALS OF BIOMEDICAL ENGINEERING
- Metal Additive Manufacturing: A Review of Mechanical Properties
- (2016) John J. Lewandowski et al. Annual Review of Materials Research
- Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
- (2016) Xiaojian Wang et al. BIOMATERIALS
- Biofabrication of bone tissue: approaches, challenges and translation for bone regeneration
- (2016) Daniel Tang et al. BIOMATERIALS
- 3D-printing techniques in a medical setting: a systematic literature review
- (2016) Philip Tack et al. Biomedical Engineering Online
- Image-guided installation of 3D-printed patient-specific implant and its application in pelvic tumor resection and reconstruction surgery
- (2016) Xiaojun Chen et al. COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE
- Biomechanical investigation into the structural design of porous additive manufactured cages using numerical and experimental approaches
- (2016) Pei-I Tsai et al. COMPUTERS IN BIOLOGY AND MEDICINE
- Additive manufacturing technology in reconstructive surgery
- (2016) Scott C. Fuller et al. Current Opinion in Otolaryngology & Head and Neck Surgery
- Surgical planning, manufacturing and implantation of an individualized cervical fusion titanium cage using patient-specific data
- (2016) Uwe Spetzger et al. EUROPEAN SPINE JOURNAL
- Salvage of Severe Foot and Ankle Trauma With a 3D Printed Scaffold
- (2016) Kamran S. Hamid et al. FOOT & ANKLE INTERNATIONAL
- A therapeutic delivery system for chronic osteomyelitis via a multi-drug implant based on three-dimensional printing technology
- (2016) Weigang Wu et al. JOURNAL OF BIOMATERIALS APPLICATIONS
- Cellular response of osteoblasts to low modulus Ti-24Nb-4Zr-8Sn alloy mesh structure
- (2016) K. C. Nune et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Postoperative Improvement of Diplopia and Extraocular Muscle Movement in Patients With Reconstructive Surgeries for Orbital Floor Fractures
- (2016) Shao-Rui Liu et al. JOURNAL OF CRANIOFACIAL SURGERY
- Successful conversion of wrist prosthesis to arthrodesis in 11 patients
- (2016) O. Reigstad et al. Journal of Hand Surgery-European Volume
- Process development and characterization of additively manufactured nickel–titanium shape memory parts
- (2016) Jason M Walker et al. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES
- Achieving biocompatible stiffness in NiTi through additive manufacturing
- (2016) Mohsen Taheri Andani et al. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES
- The feasibility of producing patient-specific acrylic cranioplasty implants with a low-cost 3D printer
- (2016) Eddie T. W. Tan et al. JOURNAL OF NEUROSURGERY
- Simultaneous Bimaxillary Surgery and Mandibular Reconstruction With a 3-Dimensional Printed Titanium Implant Fabricated by Electron Beam Melting: A Preliminary Mechanical Testing of the Printed Mandible
- (2016) Ui-Lyong Lee et al. JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY
- Favourable rotational alignment outcomes in PSI knee arthroplasty: A Level 1 systematic review and meta-analysis
- (2016) A. Mannan et al. KNEE
- 3D printed microfluidic devices: enablers and barriers
- (2016) Sidra Waheed et al. LAB ON A CHIP
- Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment
- (2016) Naoya Taniguchi et al. Materials Science & Engineering C-Materials for Biological Applications
- Role of pore size and morphology in musculo-skeletal tissue regeneration
- (2016) Roman A. Perez et al. Materials Science & Engineering C-Materials for Biological Applications
- A Custom-made Acetabular Implant for Paprosky Type 3 Defects
- (2016) Marieke Baauw et al. ORTHOPEDICS
- Geometry Design Optimization of Functionally Graded Scaffolds for Bone Tissue Engineering: A Mechanobiological Approach
- (2016) Antonio Boccaccio et al. PLoS One
- Applications of 3D printing in the management of severe spinal conditions
- (2016) Elena Provaggi et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE
- Fabrication of NiTi through additive manufacturing: A review
- (2016) Mohammad Elahinia et al. PROGRESS IN MATERIALS SCIENCE
- Fabrication and characterization of selective laser melting printed Ti–6Al–4V alloys subjected to heat treatment for customized implants design
- (2016) Mengke Wang et al. Progress in Natural Science-Materials International
- Reconstruction of the Upper Cervical Spine Using a Personalized 3D-Printed Vertebral Body in an Adolescent With Ewing Sarcoma
- (2016) Nanfang Xu et al. SPINE
- Reconstruction of an Extensive Midfacial Defect Using Additive Manufacturing Techniques
- (2016) Nelson Fernandes et al. Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry
- Development of Three-Dimensional Printed Craniocerebral Models for Simulated Neurosurgery
- (2016) Qing Lan et al. World Neurosurgery
- 3D-printed bioceramic scaffolds with a Fe3O4/graphene oxide nanocomposite interface for hyperthermia therapy of bone tumor cells
- (2016) Yongliang Zhang et al. Journal of Materials Chemistry B
- Fabrication and characterization of selective laser melting printed Ti–6Al–4V alloys subjected to heat treatment for customized implants design
- (2016) Mengke Wang et al. Progress in Natural Science-Materials International
- From the printer: Potential of three-dimensional printing for orthopaedic applications
- (2016) Sze-Wing Mok et al. Journal of Orthopaedic Translation
- Design and Fabrication of 3D printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects
- (2016) Seyed-Iman Roohani-Esfahani et al. Scientific Reports
- Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing
- (2015) Beth E. Carroll et al. ACTA MATERIALIA
- Osteoinduction of bone grafting materials for bone repair and regeneration
- (2015) Elena García-Gareta et al. BONE
- Regulatory Considerations in the Design and Manufacturing of Implantable 3D-Printed Medical Devices
- (2015) Robert J. Morrison et al. CTS-Clinical and Translational Science
- The surgical neurovascular anatomy relating to partial and complete sacral and sacroiliac resections: a cadaveric, anatomic study
- (2015) Carmine Zoccali et al. EUROPEAN SPINE JOURNAL
- Applications of Metal Additive Manufacturing in Veterinary Orthopedic Surgery
- (2015) Ola L. A. Harrysson et al. JOM
- Current Failure Mechanisms After Knee Arthroplasty Have Changed: Polyethylene Wear Is Less Common in Revision Surgery
- (2015) Kathi Thiele et al. JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME
- Custom-made titanium devices as membranes for bone augmentation in implant treatment: Modeling accuracy of titanium products constructed with selective laser melting
- (2015) Naruto Otawa et al. JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY
- Tibiocalcaneal Arthrodesis With a Porous Tantalum Spacer and Locked Intramedullary Nail for Post-Traumatic Global Avascular Necrosis of the Talus
- (2015) Michael M. Cohen et al. Journal of Foot & Ankle Surgery
- Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
- (2015) Galina Kasperovich et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Application of Additive Manufacturing in Oral and Maxillofacial Surgery
- (2015) Elisabet Farré-Guasch et al. JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY
- Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and designs
- (2015) Swee Leong Sing et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- The use of 3D printing technology in reconstruction of a severe glenoid defect: a case report with 2.5 years of follow-up
- (2015) Daniel V.C. Stoffelen et al. JOURNAL OF SHOULDER AND ELBOW SURGERY
- Implantation of customized 3-D printed titanium prosthesis in limb salvage surgery: a case series and review of the literature
- (2015) Hongbin Fan et al. World Journal of Surgical Oncology
- 3D printing technology to control BMP-2 and VEGF delivery spatially and temporally to promote large-volume bone regeneration
- (2015) Ju Young Park et al. Journal of Materials Chemistry B
- Review of selective laser melting: Materials and applications
- (2015) C. Y. Yap et al. Applied Physics Reviews
- Design and 3D Printing of Scaffolds and Tissues
- (2015) Jia An et al. Engineering
- Fatigue Performance of Laser Additive Manufactured Ti–6Al–4V in Very High Cycle Fatigue Regime up to 109 Cycles
- (2015) Eric Wycisk et al. Frontiers in Materials
- The Epidemiology and Injury Patterns of Acetabular Fractures: Are the USA and China Comparable?
- (2014) Cyril Mauffrey et al. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
- Evaluation of the accuracy of patient-specific cutting blocks for total knee arthroplasty: a meta-analysis
- (2014) Etienne Cavaignac et al. INTERNATIONAL ORTHOPAEDICS
- Role of α2β1 integrins in mediating cell shape on microtextured titanium surfaces
- (2014) Min Lai et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
- (2014) Yong Huang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Metal Additive Manufacturing: A Review
- (2014) William E. Frazier JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Numerical optimization of open-porous bone scaffold structures to match the elastic properties of human cortical bone
- (2014) Jan Wieding et al. Journal of the Mechanical Behavior of Biomedical Materials
- Effects of bio-functionalizing surface treatments on the mechanical behavior of open porous titanium biomaterials
- (2014) S. Amin Yavari et al. Journal of the Mechanical Behavior of Biomedical Materials
- 3D bioprinting of tissues and organs
- (2014) Sean V Murphy et al. NATURE BIOTECHNOLOGY
- Biomechanical and Histological Evaluation of Roughened Surface Titanium Screws Fabricated by Electron Beam Melting
- (2014) Jun Yang et al. PLoS One
- Pilot study of the wrist orthosis design process
- (2014) David Palousek et al. RAPID PROTOTYPING JOURNAL
- On the development of high quality NiTi shape memory and pseudoelastic parts by additive manufacturing
- (2014) Christoph Haberland et al. Smart Materials and Structures
- Novel processing of iron–manganese alloy-based biomaterials by inkjet 3-D printing
- (2013) Da-Tren Chou et al. Acta Biomaterialia
- Favorable results after total wrist arthroplasty
- (2013) Michel E H Boeckstyns et al. Acta Orthopaedica
- Why Are Total Knees Failing Today? Etiology of Total Knee Revision in 2010 and 2011
- (2013) William C. Schroer et al. JOURNAL OF ARTHROPLASTY
- Utility of multimaterial 3D printers in creating models with pathological entities to enhance the training experience of neurosurgeons
- (2013) Vicknes Waran et al. JOURNAL OF NEUROSURGERY
- The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds
- (2012) S. Van Bael et al. Acta Biomaterialia
- In vivo biocompatibility and biodegradation of 3D-printed porous scaffolds based on a hydroxyl-functionalized poly(ε-caprolactone)
- (2012) Hajar Seyednejad et al. BIOMATERIALS
- Modular hemipelvic endoprosthesis reconstruction–Experience in 100 patients with mid-term follow-up results
- (2012) T. Ji et al. EJSO
- In-vivobehavior of Si-hydroxyapatite/polycaprolactone/DMB scaffolds fabricated by 3D printing
- (2012) Luis Meseguer-Olmo et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Promising one- to six-year results with the Motec wrist arthroplasty in patients with post-traumatic osteoarthritis
- (2012) O. Reigstad et al. JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME
- Clinical Outcomes of Total Wrist Arthroplasty
- (2012) Jason A. Nydick et al. JOURNAL OF HAND SURGERY-AMERICAN VOLUME
- Selective laser melting-produced porous titanium scaffolds regenerate bone in critical size cortical bone defects
- (2012) Johan Van der Stok et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- The biocompatibility of dense and porous Nickel–Titanium produced by selective laser melting
- (2012) T. Habijan et al. Materials Science & Engineering C-Materials for Biological Applications
- Patient‐specific reconstruction with 3D modeling and DMLS additive manufacturing
- (2012) Mika Salmi et al. RAPID PROTOTYPING JOURNAL
- Mediation of osteogenic differentiation of human mesenchymal stem cells on titanium surfaces by a Wnt-integrin feedback loop
- (2011) Rene Olivares-Navarrete et al. BIOMATERIALS
- International survey of primary and revision total knee replacement
- (2011) Steven M. Kurtz et al. INTERNATIONAL ORTHOPAEDICS
- Results of Total Ankle Arthroplasty
- (2011) Mark E Easley et al. JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME
- Unknown
- (2011) Marie Cronskar Journal of Medical and Biological Engineering
- Pore size regulates cell and tissue interactions with PLGA-CaP scaffolds used for bone engineering
- (2011) Luciana Gonçalves Sicchieri et al. Journal of Tissue Engineering and Regenerative Medicine
- Effect of Polycaprolactone Scaffold Permeability on Bone Regeneration In Vivo
- (2011) Anna G. Mitsak et al. TISSUE ENGINEERING PART A
- CAD/CAM and rapid prototyped titanium for reconstruction of ramus defect and condylar fracture caused by mandibular reduction
- (2011) Guosong Wang et al. Oral Surgery Oral Medicine Oral Pathology Oral Radiology
- Biomimetic composite coating on rapid prototyped scaffolds for bone tissue engineering
- (2010) M. Tarik Arafat et al. Acta Biomaterialia
- Investigation of the mechanical properties and porosity relationships in selective laser-sintered polyhedral for functionally graded scaffolds
- (2010) N. Sudarmadji et al. Acta Biomaterialia
- An investigation of the aseptic loosening of an AISI 316L stainless steel hip prosthesis
- (2010) Matjaž Godec et al. Biomedical Materials
- Reimplantation of a Totally Extruded Talus
- (2010) K L Apostle et al. JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME
- 3D powder printed calcium phosphate implants for reconstruction of cranial and maxillofacial defects
- (2010) Uwe Klammert et al. JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY
- A level-set procedure for the design of electromagnetic metamaterials
- (2010) Shiwei Zhou et al. OPTICS EXPRESS
- 3D printing based on imaging data: review of medical applications
- (2010) F. Rengier et al. International Journal of Computer Assisted Radiology and Surgery
- Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants
- (2009) Amit Bandyopadhyay et al. Acta Biomaterialia
- Scaffold Design and Manufacturing: From Concept to Clinic
- (2009) Scott J. Hollister ADVANCED MATERIALS
- Differential effects of designed scaffold permeability on chondrogenesis by chondrocytes and bone marrow stromal cells
- (2009) Jessica M. Kemppainen et al. BIOMATERIALS
- Rapid prototyped PGA/PLA scaffolds in the reconstruction of mandibular condyle bone defects
- (2009) Hua Xu et al. International Journal of Medical Robotics and Computer Assisted Surgery
- Limb sparing surgery for bone tumours of the shoulder girdle: the oncological and functional results
- (2009) Qiang Yang et al. INTERNATIONAL ORTHOPAEDICS
- Maxillofacial reconstruction using custom-made artificial bones fabricated by inkjet printing technology
- (2009) Hideto Saijo et al. JOURNAL OF ARTIFICIAL ORGANS
- Functionally graded β-TCP/PCL nanocomposite scaffolds:In vitroevaluation with human fetal osteoblast cells for bone tissue engineering
- (2009) Seher Ozkan et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- In vivoperformance of selective electron beam-melted Ti-6Al-4V structures
- (2009) Sabine Ponader et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Cellular Ti–6Al–4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting
- (2008) Peter Heinl et al. Acta Biomaterialia
- Total Ankle Arthroplasty following Revascularization of Avascular Necrosis of the Talar Body: Two Case Reports and Literature Review
- (2008) Keun Bae Lee et al. FOOT & ANKLE INTERNATIONAL
- Application of Laser Engineered Net Shaping (LENS) to manufacture porous and functionally graded structures for load bearing implants
- (2008) Amit Bandyopadhyay et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Integrin 2 1 plays a critical role in osteoblast response to micron-scale surface structure and surface energy of titanium substrates
- (2008) R. Olivares-Navarrete et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Growth and Osteogenic Differentiation of Adipose Stem Cells on PLA/Bioactive Glass and PLA/β-TCP Scaffolds
- (2008) Suvi Haimi et al. TISSUE ENGINEERING PART A
- Generation of three-dimensional prototype models based on cone beam computed tomography
- (2008) J. Th. Lambrecht et al. International Journal of Computer Assisted Radiology and Surgery
- Effects of topographical surface modifications of electron beam melted Ti-6Al-4V titanium on human fetal osteoblasts
- (2007) Sabine Ponader et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Engineering functionally graded tissue engineering scaffolds
- (2007) K LEONG et al. Journal of the Mechanical Behavior of Biomedical Materials
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now