标题
Li-S Batteries: Challenges, Achievements and Opportunities
作者
关键词
-
出版物
Electrochemical Energy Reviews
Volume 6, Issue 1, Pages -
出版商
Springer Science and Business Media LLC
发表日期
2023-08-21
DOI
10.1007/s41918-023-00188-4
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Electrochemical Reactivation of Dead Li 2 S for Li−S Batteries in Non‐Solvating Electrolytes
- (2023) Xiaoqun Qi et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Lithium–sulfur cells with a sulfide solid electrolyte/polysulfide cathode interface
- (2023) Yin-Ju Yen et al. Journal of Materials Chemistry A
- Design Rules of a Sulfur Redox Electrocatalyst for Lithium‐sulfur Batteries
- (2022) Li Wang et al. ADVANCED MATERIALS
- An encapsulating lithium-polysulfide electrolyte for practical lithium–sulfur batteries
- (2022) Li-Peng Hou et al. Chem
- Catalytic Mechanism of Oxygen Vacancies in Perovskite Oxides for Lithium–Sulfur Batteries
- (2022) Wenshuo Hou et al. ADVANCED MATERIALS
- Towards Practical High‐Energy‐Density Lithium–Sulfur Pouch Cells: A Review
- (2022) Zi‐Xian Chen et al. ADVANCED MATERIALS
- Pushing Lithium–Sulfur Batteries towards Practical Working Conditions through a Cathode–Electrolyte Synergy
- (2022) Chen Zhao et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- “One Stone Two Birds” Design for Dual‐Functional TiO 2 ‐TiN Heterostructures Enabled Dendrite‐Free and Kinetics‐Enhanced Lithium–Sulfur Batteries
- (2022) Pan Xue et al. Advanced Energy Materials
- Li 2 S 4 Anchoring Governs the Catalytic Sulfur Reduction on Defective SmMn 2 O 5 in Lithium–Sulfur Battery
- (2022) Li Wang et al. Advanced Energy Materials
- Configurational and structural design of separators toward shuttling-free and dendrite-free lithium-sulfur batteries: A review
- (2022) Min Chen et al. Energy Storage Materials
- Inorganic all-solid-state lithium-sulfur batteries enhanced by facile thermal formation
- (2022) Shuyang Li et al. Energy Storage Materials
- Regulating Lithium Salt to Inhibit Surface Gelation on an Electrocatalyst for High-Energy-Density Lithium–Sulfur Batteries
- (2022) Xi-Yao Li et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Failure analysis of high-energy-density lithium‒sulfur pouch cells
- (2022) Zi-Xian Chen et al. Energy Storage Materials
- In Situ Separator Modification with an N-Rich Conjugated Microporous Polymer for the Effective Suppression of Polysulfide Shuttle and Li Dendrite Growth
- (2022) Yanfei Yang et al. ACS Applied Materials & Interfaces
- Weakening the Solvating Power of Solvents to Encapsulate Lithium Polysulfides Enables Long‐Cycling Lithium–Sulfur Batteries
- (2022) Li‐Peng Hou et al. ADVANCED MATERIALS
- Boosting sulfur catalytic kinetics by defect engineering of vanadium disulfide for high-performance lithium-sulfur batteries
- (2022) Guo Liu et al. CHEMICAL ENGINEERING JOURNAL
- Solid-state electrolytes for solid-state lithium-sulfur batteries: Comparisons, advances and prospects
- (2022) Xin Liang et al. Journal of Energy Chemistry
- A functional additive to in-situ construct stable cathode and anode interfaces for all-solid-state lithium-sulfur batteries
- (2022) Huanhuan Duan et al. CHEMICAL ENGINEERING JOURNAL
- Hydrofluoroether Diluted Dual‐Salts‐Based Electrolytes for Lithium‐Sulfur Batteries with Enhanced Lithium Anode Protection
- (2022) Xirui Kong et al. Small
- n ‐Hexane Diluted Electrolyte with Ultralow Density enables Li–S Pouch Battery Toward >400 Wh kg −1
- (2022) Hao Cheng et al. Small
- Recent Progress of Anode Protection in Li–S Batteries
- (2022) Mohammed Radha Al Khazraji et al. Energy Technology
- Interface covalent bonding endowing high-sulfur-loading paper cathode with robustness for energy-dense, compact and foldable lithium-sulfur batteries
- (2021) Hong Li et al. CHEMICAL ENGINEERING JOURNAL
- Strong Chemical Interaction between Lithium Polysulfides and Flame‐Retardant Polyphosphazene for Lithium–Sulfur Batteries with Enhanced Safety and Electrochemical Performance
- (2021) Peng Chen et al. ADVANCED MATERIALS
- Recent Progress in Organic Polymers-Composited Sulfur Materials as cathodes for Lithium-Sulfur Battery
- (2021) Kangfei Liu et al. CHEMICAL ENGINEERING JOURNAL
- Direct Ink Writing of Moldable Electrochemical Energy Storage Devices: Ongoing Progress, Challenges, and Prospects
- (2021) Quanhai Zhang et al. ADVANCED ENGINEERING MATERIALS
- Electrolyte Structure of Lithium Polysulfides with Anti‐Reductive Solvent Shells for Practical Lithium–Sulfur Batteries
- (2021) Xue-Qiang Zhang et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Atomic Tungsten on Graphene with Unique Coordination Enabling Kinetically Boosted Lithium−sulfur Batteries
- (2021) Peng Wang et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Constructing coral-like hierarchical porous carbon architectures with tailored pore size distribution as sulfur hosts for durable Li-S batteries
- (2021) Qianqian Hu et al. ELECTROCHIMICA ACTA
- Challenges and promises of lithium metal anode by soluble polysulfides in practical lithium–sulfur batteries
- (2021) Li-Peng Hou et al. Materials Today
- Achieving High-Performance Li–S Batteries via Polysulfide Adjoining Interface Engineering
- (2021) Hun Kim et al. ACS Applied Materials & Interfaces
- Wide Working Temperature Range Rechargeable Lithium–Sulfur Batteries: A Critical Review
- (2021) Zhenfang Zhou et al. ADVANCED FUNCTIONAL MATERIALS
- Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
- (2021) Yi Chen et al. ADVANCED MATERIALS
- Selective Catalysis Remedies Polysulfide Shuttling in Lithium‐Sulfur Batteries
- (2021) Wuxing Hua et al. ADVANCED MATERIALS
- Designing Cation–Solvent Fully Coordinated Electrolyte for High‐Energy‐Density Lithium–Sulfur Full Cell Based On Solid–Solid Conversion
- (2021) Huijun Yang et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Flexible S@C-CNTs cathodes with robust mechanical strength via blade-coating for lithium-sulfur batteries
- (2021) Chong Xie et al. JOURNAL OF COLLOID AND INTERFACE SCIENCE
- Recent progress of separators in lithium-sulfur batteries
- (2021) Chao Li et al. Energy Storage Materials
- Ionic‐Liquid‐Assisted Synthesis of N, F, and B Co‐Doped CoFe 2 O 4− x on Multiwalled Carbon Nanotubes with Enriched Oxygen Vacancies for Li–S Batteries
- (2021) Shunyou Hu et al. ADVANCED FUNCTIONAL MATERIALS
- Two Birds with One Stone: Interfacial Engineering of Multifunctional Janus Separator for Lithium–Sulfur Batteries
- (2021) Yiju Li et al. ADVANCED MATERIALS
- Engineering d‐p Orbital Hybridization in Single‐Atom Metal‐Embedded Three‐Dimensional Electrodes for Li–S Batteries
- (2021) Zhiyuan Han et al. ADVANCED MATERIALS
- An odyssey of lithium metal anode in liquid lithium–sulfur batteries
- (2021) Xiao-Zhong Fan et al. CHINESE CHEMICAL LETTERS
- Appreciating the role of polysulfides in lithium-sulfur batteries and regulation strategies by electrolytes engineering
- (2021) Jian Tan et al. Energy Storage Materials
- Recent Progress in MXene-Based Materials for Metal-Sulfur and Metal-Air Batteries: Potential High-Performance Electrodes
- (2021) Anmin Liu et al. Electrochemical Energy Reviews
- High-valence sulfur-containing species in solid electrolyte interphase stabilizes lithium metal anodes in lithium–sulfur batteries
- (2021) Li-Peng Hou et al. Journal of Energy Chemistry
- An integrated approach to improve the performance of lean–electrolyte lithium–sulfur batteries
- (2021) Hualin Ye et al. Journal of Energy Chemistry
- Multifunctional Cellulose Nanocrystals as a High-Efficient Polysulfide Stopper for Practical Li-S Batteries
- (2020) Jie Liu et al. ACS Applied Materials & Interfaces
- Spherical Metal Oxides with High Tap Density as Sulfur Host to Enhance Cathode Volumetric Capacity for Lithium–Sulfur Battery
- (2020) Lu Wang et al. ACS Applied Materials & Interfaces
- 3D Printed High‐Loading Lithium‐Sulfur Battery Toward Wearable Energy Storage
- (2020) Chenglong Chen et al. ADVANCED FUNCTIONAL MATERIALS
- B,N Codoped Graphitic Nanotubes Loaded with Co Nanoparticles as Superior Sulfur Host for Advanced Li–S Batteries
- (2020) Zhuosen Wang et al. Small
- Facile synthesis of sulfurized polyacrylonitrile composite as cathode for high-rate lithium-sulfur batteries
- (2020) Jingwei Xiang et al. Journal of Energy Chemistry
- Towards stable lithium-sulfur battery cathodes by combining physical and chemical confinement of polysulfides in core-shell structured nitrogen-doped carbons
- (2020) Runyu Yan et al. CARBON
- Multifunctional cross-linked polymer-Laponite nanocomposite binder for lithium-sulfur batteries
- (2020) Rongnan Guo et al. CHEMICAL ENGINEERING JOURNAL
- From nanoscale interface characterization to sustainable energy storage using all-solid-state batteries
- (2020) Darren H. S. Tan et al. Nature Nanotechnology
- Straightforward synthesis of Sulfur/N,S-codoped carbon cathodes for Lithium-Sulfur batteries
- (2020) Marta Sevilla et al. Scientific Reports
- β-FeOOH Interlayer With Abundant Oxygen Vacancy Toward Boosting Catalytic Effect for Lithium Sulfur Batteries
- (2020) Yingying Li et al. Frontiers in Chemistry
- Cost-Effective Water-Soluble Poly(vinyl alcohol) as a Functional Binder for High-Sulfur-Loading Cathodes in Lithium–Sulfur Batteries
- (2020) Junbin Liao et al. ACS Omega
- NiO nanosheets grown on carbon cloth as mesoporous cathode for High-performance lithium-sulfur battery
- (2020) Salma Abualela et al. MATERIALS LETTERS
- A Perspective toward Practical Lithium–Sulfur Batteries
- (2020) Meng Zhao et al. ACS Central Science
- Unravel the Catalytic Effect of Two-Dimensional Metal Sulfides on Polysulfide Conversions for Lithium–Sulfur Batteries
- (2020) Chunli Wang et al. ACS Applied Materials & Interfaces
- Lithium/Sulfide All‐Solid‐State Batteries using Sulfide Electrolytes
- (2020) Jinghua Wu et al. ADVANCED MATERIALS
- Water-based phytic acid-crosslinked supramolecular binders for lithium-sulfur batteries
- (2020) Hui Wang et al. CHEMICAL ENGINEERING JOURNAL
- Size-tunable SnS2 nanoparticles assembled on graphene as anodes for high performance lithium/sodium-ion batteries
- (2020) Bing Zhao et al. ELECTROCHIMICA ACTA
- Environmentally Friendly Binders for Lithium‐Sulfur Batteries
- (2020) Biyu Jin et al. ChemElectroChem
- Interfacial redox behaviors of sulfide electrolytes in fast-charging all-solid-state lithium metal batteries
- (2020) Gao-Long Zhu et al. Energy Storage Materials
- Multilevel structured carbon film as cathode host for Li-S batteries with superhigh-areal-capacity
- (2020) Bin He et al. Nano Research
- 2D spinel ZnCo2O4 microsheet-coated functional separator for promoted redox kinetics and inhibited polysulfide dissolution
- (2020) Jeong Seok Yeon et al. Journal of Energy Chemistry
- A versatile nano-TiO2 decorated gel separator with derived multi-scale nanofibers towards dendrite-blocking and polysulfide-inhibiting lithium-metal batteries
- (2020) Huijuan Zhao et al. Journal of Energy Chemistry
- High-Fluorinated Electrolytes for Li-S Batteries
- (2019) Jing Zheng et al. Advanced Energy Materials
- Ether-compatible sulfurized polyacrylonitrile cathode with excellent performance enabled by fast kinetics via selenium doping
- (2019) Xin Chen et al. Nature Communications
- Enhancing the performance of sulfurized polyacrylonitrile cathode by in-situ wrapping
- (2019) Feng Jin et al. JOURNAL OF ELECTROANALYTICAL CHEMISTRY
- Lithium–Magnesium Alloy as a Stable Anode for Lithium–Sulfur Battery
- (2019) Ling‐Long Kong et al. ADVANCED FUNCTIONAL MATERIALS
- Enhanced Sulfur Redox and Polysulfide Regulation via Porous VN-Modified Separator for Li–S Batteries
- (2019) Yingze Song et al. ACS Applied Materials & Interfaces
- Co–Fe Mixed Metal Phosphide Nanocubes with Highly Interconnected-Pore Architecture as an Efficient Polysulfide Mediator for Lithium–Sulfur Batteries
- (2019) Yi Chen et al. ACS Nano
- Metal Sulfide‐Decorated Carbon Sponge as a Highly Efficient Electrocatalyst and Absorbant for Polysulfide in High‐Loading Li 2 S Batteries
- (2019) Jiarui He et al. Advanced Energy Materials
- Recent progress in fluorinated electrolytes for improving the performance of Li–S batteries
- (2019) Xiwen Wang et al. Journal of Energy Chemistry
- Ultradispersed WxC nanoparticles enable fast polysulfide interconversion for high-performance Li-S batteries
- (2019) Yunling Wu et al. Nano Energy
- Boosting high energy density lithium-ion storage via the rational design of FeS incorporated sulfurized polyacrylonitrile fiber hybrid cathode
- (2019) Anupriya K. Haridas et al. ACS Applied Materials & Interfaces
- In-Plane Highly Dispersed Cu2O Nanoparticles for Seeded Lithium Deposition
- (2019) Yuanming Liu et al. NANO LETTERS
- Rational design of spontaneous reactions for protecting porous lithium electrodes in lithium–sulfur batteries
- (2019) Y. X. Ren et al. Nature Communications
- Single Nickel Atoms on Nitrogen‐Doped Graphene Enabling Enhanced Kinetics of Lithium–Sulfur Batteries
- (2019) Linlin Zhang et al. ADVANCED MATERIALS
- CoS-interposed and Ketjen black-embedded carbon nanofiber framework as a separator modulation for high performance Li-S batteries
- (2019) Yuebin Yang et al. CHEMICAL ENGINEERING JOURNAL
- The recent research status quo and the prospect of electrolytes for lithium sulfur batteries
- (2019) Lanlan Fan et al. CHEMICAL ENGINEERING JOURNAL
- Confinement of sulfur in the micropores of honeycomb-like carbon derived from lignin for lithium-sulfur battery cathode
- (2019) Jeong Seok Yeon et al. CHEMICAL ENGINEERING JOURNAL
- Dendrite-Free and Stable Lithium Metal Anodes Enabled by an Antimony-Based Lithiophilic Interphase
- (2019) Tao Chen et al. CHEMISTRY OF MATERIALS
- Ultrathin sheets of MoS2/g-C3N4 composite as a good hosting material of sulfur for lithium–sulfur batteries
- (2019) Soumyadip Majumder et al. JOURNAL OF POWER SOURCES
- Compactly Coupled Nitrogen‐Doped Carbon Nanosheets/Molybdenum Phosphide Nanocrystal Hollow Nanospheres as Polysulfide Reservoirs for High‐Performance Lithium–Sulfur Chemistry
- (2019) Zhonghui Sun et al. Small
- Challenges and Opportunities towards Practical Lithium-Sulfur Batteries under Lean Electrolyte Conditions
- (2019) Meng Zhao et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Prospect of S@pPAN cathode materials for rechargeable lithium batteries
- (2019) Huijun Yang et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Electrolyte Regulation towards Stable Lithium Metal Anode in Lithium-Sulfur Batteries with Sulfurized Polyacrylonitrile Cathode
- (2019) Wei-Jing Chen et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Lithium–sulfur battery with partially fluorinated ether electrolytes: Interplay between capacity, coulombic efficiency and Li anode protection
- (2019) Quinton J. Meisner et al. JOURNAL OF POWER SOURCES
- Adsorption‐Catalysis Design in the Lithium‐Sulfur Battery
- (2019) Miao Zhang et al. Advanced Energy Materials
- MoN Supported on Graphene as a Bifunctional Interlayer for Advanced Li‐S Batteries
- (2019) Da Tian et al. Advanced Energy Materials
- Toward a practical Li-S battery enabled by synergistic confinement of a nitrogen-enriched porous carbon as a multifunctional interlayer and sulfur-host material
- (2019) Shanxing Wang et al. JOURNAL OF ELECTROANALYTICAL CHEMISTRY
- P(VDF-HFP)-poly(sulfur-1,3-diisopropenylbenzene) functional polymer electrolyte for lithium–sulfur batteries
- (2019) Jiang-Hui Jiang et al. Journal of Energy Chemistry
- Nitrogen-Doped Single-Walled Carbon Nanohorns as a Cost-Effective Carbon Host toward High-Performance Lithium–Sulfur Batteries
- (2018) Umair Gulzar et al. ACS Applied Materials & Interfaces
- SnO2/Reduced Graphene Oxide Interlayer Mitigating the Shuttle Effect of Li–S Batteries
- (2018) Nana Hu et al. ACS Applied Materials & Interfaces
- Fe3O4-decorated porous graphene interlayer for high-performance lithium-sulfur batteries
- (2018) Yuanming Liu et al. ACS Applied Materials & Interfaces
- Development and Challenges of Functional Electrolytes for High-Performance Lithium-Sulfur Batteries
- (2018) Lili Wang et al. ADVANCED FUNCTIONAL MATERIALS
- Addressing Passivation in Lithium-Sulfur Battery Under Lean Electrolyte Condition
- (2018) Huilin Pan et al. ADVANCED FUNCTIONAL MATERIALS
- Progress on the Critical Parameters for Lithium-Sulfur Batteries to be Practically Viable
- (2018) Sheng-Heng Chung et al. ADVANCED FUNCTIONAL MATERIALS
- Artificial Soft-Rigid Protective Layer for Dendrite-Free Lithium Metal Anode
- (2018) Rui Xu et al. ADVANCED FUNCTIONAL MATERIALS
- 3D-Printing Electrolytes for Solid-State Batteries
- (2018) Dennis W. McOwen et al. ADVANCED MATERIALS
- Laminated Object Manufacturing of 3D-Printed Laser-Induced Graphene Foams
- (2018) Duy Xuan Luong et al. ADVANCED MATERIALS
- Freestanding porous sulfurized polyacrylonitrile fiber as a cathode material for advanced lithium sulfur batteries
- (2018) Ying Liu et al. APPLIED SURFACE SCIENCE
- Inhibiting polysulfides diffusion of lithium-sulfur batteries using an acetylene black-CoS 2 modified separator: Mechanism research and performance improvement
- (2018) Pan Zeng et al. APPLIED SURFACE SCIENCE
- Safer lithium–sulfur battery based on nonflammable electrolyte with sulfur composite cathode
- (2018) Huijun Yang et al. CHEMICAL COMMUNICATIONS
- Recent advances in functional modification of separators in lithium–sulfur batteries
- (2018) Yibo He et al. DALTON TRANSACTIONS
- Double-shelled hollow carbon sphere with microporous outer shell towards high performance lithium-sulfur battery
- (2018) Yongzheng Zhang et al. ELECTROCHIMICA ACTA
- Layered LiTiO2 for the protection of Li2S cathodes against dissolution: mechanisms of the remarkable performance boost
- (2018) Feixiang Wu et al. Energy & Environmental Science
- Towards a reliable Li-metal-free LiNO3-free Li-ion polysulphide full cell via parallel interface engineering
- (2018) Ju Sun et al. Energy & Environmental Science
- Synchronous immobilization and conversion of polysulfides on a VO2–VN binary host targeting high sulfur load Li–S batteries
- (2018) Yingze Song et al. Energy & Environmental Science
- Hybrid electrolytes with 3D bicontinuous ordered ceramic and polymer microchannels for all-solid-state batteries
- (2018) Stefanie Zekoll et al. Energy & Environmental Science
- Vertical Co9S8 hollow nanowall arrays grown on a Celgard separator as a multifunctional polysulfide barrier for high-performance Li–S batteries
- (2018) Jiarui He et al. Energy & Environmental Science
- 3D printing well organized porous iron-nickel/polyaniline nanocages multiscale supercapacitor
- (2018) Xufei Lu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Ultrahigh Performance All Solid-State Lithium Sulfur Batteries: Salt Anion's Chemistry-Induced Anomalous Synergistic Effect
- (2018) Gebrekidan Gebresilassie Eshetu et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Hollow carbon nanofibers with dynamic adjustable pore sizes and closed ends as hosts for high-rate lithium-sulfur battery cathodes
- (2018) Xiang-Qian Zhang et al. Nano Research
- Carbon nanomaterials for advanced lithium sulfur batteries
- (2018) Zheng-Long Xu et al. Nano Today
- 2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li–S batteries
- (2018) Eunho Cha et al. Nature Nanotechnology
- In Situ Electrochemically Derived Amorphous-Li2 S for High Performance Li2 S/Graphite Full Cell
- (2018) Fangmin Ye et al. Small
- Stable cycling of lithium metal electrode in nanocomposite solid polymer electrolytes with lithium bis (fluorosulfonyl)imide
- (2018) Xabier Judez et al. SOLID STATE IONICS
- A gel polymer electrolyte based lithium‑sulfur battery with low self-discharge
- (2018) Wangyu Li et al. SOLID STATE IONICS
- A Lithium-Sulfur Cell Based on Reversible Lithium Deposition from a Li2 S Cathode Host onto a Hostless-Anode Substrate
- (2018) Sanjay Nanda et al. Advanced Energy Materials
- An interwoven MoO3@CNT scaffold interlayer for high-performance lithium–sulfur batteries
- (2018) Laiyan Luo et al. Journal of Materials Chemistry A
- Manipulating electrolyte and solid electrolyte interphase to enable safe and efficient Li-S batteries
- (2018) Jing Zheng et al. Nano Energy
- A synergistic strategy for stable lithium metal anodes using 3D fluorine-doped graphene shuttle-implanted porous carbon networks
- (2018) Zihao Li et al. Nano Energy
- Review of Carbon Materials for Lithium-Sulfur Batteries
- (2018) Shanshan Li et al. ChemistrySelect
- Atomic Interlamellar Ion Path in High Sulfur Content Lithium-Montmorillonite Host Enables High-Rate and Stable Lithium-Sulfur Battery
- (2018) Wei Chen et al. ADVANCED MATERIALS
- The Relationship between the Relative Solvating Power of Electrolytes and Shuttling Effect of Lithium Polysulfides in Lithium-Sulfur Batteries
- (2018) Chi-Cheung Su et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Metal organic framework laden poly(ethylene oxide) based composite electrolytes for all-solid-state Li-S and Li-metal polymer batteries
- (2018) Shruti Suriyakumar et al. ELECTROCHIMICA ACTA
- Synthesis and electrochemical properties of partially fluorinated ether solvents for lithium sulfur battery electrolytes
- (2018) Zheng Yue et al. JOURNAL OF POWER SOURCES
- Hierarchically Designed Electron Paths in 3D Printed Energy Storage Devices
- (2018) Seong Hyeon Park et al. LANGMUIR
- Aqueous-processable polymer binder with strong mechanical and polysulfide-trapping properties for high performance of lithium–sulfur batteries
- (2018) Huan Yi et al. Journal of Materials Chemistry A
- Tuning the electrolyte network structure to invoke quasi-solid state sulfur conversion and suppress lithium dendrite formation in Li–S batteries
- (2018) Quan Pang et al. Nature Energy
- Simultaneously Inhibiting Lithium Dendrites Growth and Polysulfides Shuttle by a Flexible MOF-Based Membrane in Li-S Batteries
- (2018) Yibo He et al. Advanced Energy Materials
- Net-Structured Filter of Co(OH)2-Anchored Carbon Nanofibers with Ketjen Black for High Performance Li–S Batteries
- (2018) Yuebin Yang et al. ACS Sustainable Chemistry & Engineering
- Towards full demonstration of high areal loading sulfur cathode in lithium–sulfur batteries
- (2018) Long Kong et al. Journal of Energy Chemistry
- Understanding the Role of Nano-Aluminum Oxide in All-Solid-State Lithium-Sulfur Batteries
- (2018) Xabier Judez et al. ChemElectroChem
- Toward a remarkable Li-S battery via 3D printing
- (2018) Xuejie Gao et al. Nano Energy
- N-doped carbon-coated hollow carbon nanofibers with interspersed TiO2 for integrated separator of Li-S batteries
- (2018) Yuebin Yang et al. ELECTROCHIMICA ACTA
- Twinborn TiO2–TiN heterostructures enabling smooth trapping–diffusion–conversion of polysulfides towards ultralong life lithium–sulfur batteries
- (2017) Tianhong Zhou et al. Energy & Environmental Science
- Exploiting a robust biopolymer network binder for an ultrahigh-areal-capacity Li–S battery
- (2017) Jie Liu et al. Energy & Environmental Science
- Lithium Bis(fluorosulfonyl)imide/Poly(ethylene oxide) Polymer Electrolyte for All Solid-State Li–S Cell
- (2017) Xabier Judez et al. Journal of Physical Chemistry Letters
- Hierarchically porous carbon derived from banana peel for lithium sulfur battery with high areal and gravimetric sulfur loading
- (2017) Fanqun Li et al. JOURNAL OF POWER SOURCES
- Li metal coated with amorphous Li 3 PO 4 via magnetron sputtering for stable and long-cycle life lithium metal batteries
- (2017) Liping Wang et al. JOURNAL OF POWER SOURCES
- Free-standing sulfur host based on titanium-dioxide-modified porous-carbon nanofibers for lithium-sulfur batteries
- (2017) Xiong Song et al. JOURNAL OF POWER SOURCES
- All-Solid-State Battery Electrode Sheets Prepared by a Slurry Coating Process
- (2017) Atsushi Sakuda et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Intrinsic Shuttle Suppression in Lithium-Sulfur Batteries for Pouch Cell Application
- (2017) Christine Weller et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Effective nondestructive evaluations on UHMWPE/Recycled-PA6 blends using FTIR imaging and dynamic mechanical analysis
- (2017) Junye Cheng et al. POLYMER TESTING
- Ultrathin dendrimer–graphene oxide composite film for stable cycling lithium–sulfur batteries
- (2017) Wen Liu et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Inkjet-Printed Lithium-Sulfur Microcathodes for All-Printed, Integrated Nanomanufacturing
- (2017) Craig A. Milroy et al. Small
- Chemical Immobilization Effect on Lithium Polysulfides for Lithium-Sulfur Batteries
- (2017) Caixia Li et al. Small
- Core-Shell Structure and Interaction Mechanism of γ-MnO2Coated Sulfur for Improved Lithium-Sulfur Batteries
- (2017) Lubin Ni et al. Small
- Sulfur-Immobilized, Activated Porous Carbon Nanotube Composite Based Cathodes for Lithium-Sulfur Batteries
- (2017) Jun Seop Lee et al. Small
- In situ wrapping of the cathode material in lithium-sulfur batteries
- (2017) Chenji Hu et al. Nature Communications
- Conductive porous vanadium nitride/graphene composite as chemical anchor of polysulfides for lithium-sulfur batteries
- (2017) Zhenhua Sun et al. Nature Communications
- 3D Printable Ceramic-Polymer Electrolytes for Flexible High-Performance Li-Ion Batteries with Enhanced Thermal Stability
- (2017) Aaron J. Blake et al. Advanced Energy Materials
- High-Performance All-Solid-State Lithium-Sulfur Batteries Enabled by Amorphous Sulfur-Coated Reduced Graphene Oxide Cathodes
- (2017) Xiayin Yao et al. Advanced Energy Materials
- A Conductive Molecular Framework Derived Li2 S/N,P-Codoped Carbon Cathode for Advanced Lithium-Sulfur Batteries
- (2017) Jun Zhang et al. Advanced Energy Materials
- Review on High-Loading and High-Energy Lithium-Sulfur Batteries
- (2017) Hong-Jie Peng et al. Advanced Energy Materials
- A high performance lithium–sulfur battery enabled by a fish-scale porous carbon/sulfur composite and symmetric fluorinated diethoxyethane electrolyte
- (2017) Mengyao Gao et al. Journal of Materials Chemistry A
- Tailored Li2S–P2S5 glass-ceramic electrolyte by MoS2 doping, possessing high ionic conductivity for all-solid-state lithium-sulfur batteries
- (2017) Ruo-chen Xu et al. Journal of Materials Chemistry A
- A 3D conductive network with high loading Li2S@C for high performance lithium–sulfur batteries
- (2017) Dong-huang Wang et al. Journal of Materials Chemistry A
- Regulating Li deposition at artificial solid electrolyte interphases
- (2017) Lei Fan et al. Journal of Materials Chemistry A
- A Mn3O4 nano-wall array based binder-free cathode for high performance lithium–sulfur batteries
- (2017) Junling Guo et al. Journal of Materials Chemistry A
- A polysulfide reduction accelerator – NiS2-modified sulfurized polyacrylonitrile as a high performance cathode material for lithium–sulfur batteries
- (2017) Yonggang Liu et al. Journal of Materials Chemistry A
- Effective electrostatic confinement of polysulfides in lithium/sulfur batteries by a functional binder
- (2017) Liang Zhang et al. Nano Energy
- Burning lithium in CS2 for high-performing compact Li2S–graphene nanocapsules for Li–S batteries
- (2017) Guoqiang Tan et al. Nature Energy
- Metal-Organic Frameworks for Energy Applications
- (2017) Hailong Wang et al. Chem
- Toward garnet electrolyte–based Li metal batteries: An ultrathin, highly effective, artificial solid-state electrolyte/metallic Li interface
- (2017) Kun (Kelvin) Fu et al. Science Advances
- Transforming waste newspapers into nitrogen-doped conducting interlayers for advanced Li–S batteries
- (2017) Chi-Hao Chang et al. Sustainable Energy & Fuels
- Confinement of polysulfides within bi-functional metal–organic frameworks for high performance lithium–sulfur batteries
- (2017) Xu-Jia Hong et al. Nanoscale
- Ammonium Additives to Dissolve Lithium Sulfide through Hydrogen Binding for High-Energy Lithium–Sulfur Batteries
- (2016) Huilin Pan et al. ACS Applied Materials & Interfaces
- Few-Layer Graphene Island Seeding for Dendrite-Free Li Metal Electrodes
- (2016) Hee-Kook Kang et al. ACS Applied Materials & Interfaces
- Trimethylsilyl Chloride-Modified Li Anode for Enhanced Performance of Li–S Cells
- (2016) Meifen Wu et al. ACS Applied Materials & Interfaces
- Toward Dendrite-Free Lithium Deposition via Structural and Interfacial Synergistic Effects of 3D Graphene@Ni Scaffold
- (2016) Keyu Xie et al. ACS Applied Materials & Interfaces
- Graphene Sandwiched by Sulfur-Confined Mesoporous Carbon Nanosheets: A Kinetically Stable Cathode for Li–S Batteries
- (2016) Sen Xin et al. ACS Applied Materials & Interfaces
- Influence of Polar Organic Solvents in an Ionic Liquid Containing Lithium Bis(fluorosulfonyl)amide: Effect on the Cation–Anion Interaction, Lithium Ion Battery Performance, and Solid Electrolyte Interphase
- (2016) Abhishek Lahiri et al. ACS Applied Materials & Interfaces
- A Facile Bottom-Up Approach to Construct Hybrid Flexible Cathode Scaffold for High-Performance Lithium–Sulfur Batteries
- (2016) Arnab Ghosh et al. ACS Applied Materials & Interfaces
- High-Performance Lithium–Sulfur Batteries with a Self-Assembled Multiwall Carbon Nanotube Interlayer and a Robust Electrode–Electrolyte Interface
- (2016) Hee Min Kim et al. ACS Applied Materials & Interfaces
- Improvement of Cycling Performance of Lithium–Sulfur Batteries by Using Magnesium Oxide as a Functional Additive for Trapping Lithium Polysulfide
- (2016) Rubha Ponraj et al. ACS Applied Materials & Interfaces
- Elemental Sulfur and Molybdenum Disulfide Composites for Li–S Batteries with Long Cycle Life and High-Rate Capability
- (2016) Philip T. Dirlam et al. ACS Applied Materials & Interfaces
- In Situ Reactive Assembly of Scalable Core–Shell Sulfur–MnO2 Composite Cathodes
- (2016) Xiao Liang et al. ACS Nano
- Incorporating Sulfur Inside the Pores of Carbons for Advanced Lithium–Sulfur Batteries: An Electrolysis Approach
- (2016) Bin He et al. ACS Nano
- Hierarchical Carbon Nanotubes with a Thick Microporous Wall and Inner Channel as Efficient Scaffolds for Lithium-Sulfur Batteries
- (2016) Kan Mi et al. ADVANCED FUNCTIONAL MATERIALS
- Covalently Connected Carbon Nanostructures for Current Collectors in Both the Cathode and Anode of Li-S Batteries
- (2016) Song Jin et al. ADVANCED MATERIALS
- An Artificial Solid Electrolyte Interphase with High Li-Ion Conductivity, Mechanical Strength, and Flexibility for Stable Lithium Metal Anodes
- (2016) Yayuan Liu et al. ADVANCED MATERIALS
- Conductive Nanostructured Scaffolds Render Low Local Current Density to Inhibit Lithium Dendrite Growth
- (2016) Rui Zhang et al. ADVANCED MATERIALS
- Mesoporous Titanium Nitride-Enabled Highly Stable Lithium-Sulfur Batteries
- (2016) Zhiming Cui et al. ADVANCED MATERIALS
- Phosphorene as a Polysulfide Immobilizer and Catalyst in High-Performance Lithium-Sulfur Batteries
- (2016) Lu Li et al. ADVANCED MATERIALS
- Rational Design of Si/SiO2@Hierarchical Porous Carbon Spheres as Efficient Polysulfide Reservoirs for High-Performance Li-S Battery
- (2016) Sarish Rehman et al. ADVANCED MATERIALS
- An Elastic, Conductive, Electroactive Nanocomposite Binder for Flexible Sulfur Cathodes in Lithium-Sulfur Batteries
- (2016) Craig Milroy et al. ADVANCED MATERIALS
- Interwoven MXene Nanosheet/Carbon-Nanotube Composites as Li-S Cathode Hosts
- (2016) Xiao Liang et al. ADVANCED MATERIALS
- Dendrite-Free Lithium Deposition Induced by Uniformly Distributed Lithium Ions for Efficient Lithium Metal Batteries
- (2016) Xin-Bing Cheng et al. ADVANCED MATERIALS
- Enhanced Performance of a Lithium-Sulfur Battery Using a Carbonate-Based Electrolyte
- (2016) Zhixin Xu et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Sulfur confined in nitrogen-doped microporous carbon used in a carbonate-based electrolyte for long-life, safe lithium-sulfur batteries
- (2016) Shuzhang Niu et al. CARBON
- Highly porous polyacrylonitrile/graphene oxide membrane separator exhibiting excellent anti-self-discharge feature for high-performance lithium–sulfur batteries
- (2016) Jiadeng Zhu et al. CARBON
- Combustion-mediated synthesis of hollow carbon nanospheres for high-performance cathode material in lithium-sulfur battery
- (2016) Hayk H. Nersisyan et al. CARBON
- Stabilizing sulfur cathodes using nitrogen-doped graphene as a chemical immobilizer for Li S batteries
- (2016) Lu Li et al. CARBON
- Printed microelectrodes for scalable, high-areal-capacity lithium–sulfur batteries
- (2016) Craig Milroy et al. CHEMICAL COMMUNICATIONS
- Carbon Materials for Lithium Sulfur Batteries-Ten Critical Questions
- (2016) Lars Borchardt et al. CHEMISTRY-A EUROPEAN JOURNAL
- Composite Nanofibers as Advanced Materials for Li-ion, Li-O 2 and Li-S Batteries
- (2016) Victor A. Agubra et al. ELECTROCHIMICA ACTA
- A simply effective double-coating cathode with MnO 2 nanosheets/graphene as functionalized interlayer for high performance lithium-sulfur batteries
- (2016) Wang Sun et al. ELECTROCHIMICA ACTA
- High performance freestanding composite cathode for lithium-sulfur batteries
- (2016) Almagul Mentbayeva et al. ELECTROCHIMICA ACTA
- Ball-milling synthesis of ZnO@sulphur/carbon nanotubes and Ni(OH) 2 @sulphur/carbon nanotubes composites for high-performance lithium-sulphur batteries
- (2016) Xingxing Gu et al. ELECTROCHIMICA ACTA
- Rational designs and engineering of hollow micro-/nanostructures as sulfur hosts for advanced lithium–sulfur batteries
- (2016) Zhen Li et al. Energy & Environmental Science
- To mitigate self-discharge of lithium–sulfur batteries by optimizing ionic liquid electrolytes
- (2016) Lina Wang et al. Energy & Environmental Science
- Kinetically-enhanced polysulfide redox reactions by Nb2O5 nanocrystals for high-rate lithium–sulfur battery
- (2016) Yingqing Tao et al. Energy & Environmental Science
- A Robust Luminescent Tb(III)-MOF with Lewis Basic Pyridyl Sites for the Highly Sensitive Detection of Metal Ions and Small Molecules
- (2016) Jun Zhao et al. INORGANIC CHEMISTRY
- A high-level N-doped porous carbon nanowire modified separator for long-life lithium–sulfur batteries
- (2016) Xiangyang Zhou et al. JOURNAL OF ELECTROANALYTICAL CHEMISTRY
- Sulfur-impregnated 3D hierarchical porous nitrogen-doped aligned carbon nanotubes as high-performance cathode for lithium-sulfur batteries
- (2016) Weina Deng et al. JOURNAL OF POWER SOURCES
- Electronic and ionic co-conductive coating on the separator towards high-performance lithium–sulfur batteries
- (2016) Qingsong Wang et al. JOURNAL OF POWER SOURCES
- The enhancement of polysulfide absorbsion in Li S batteries by hierarchically porous CoS 2 /carbon paper interlayer
- (2016) Zhaoling Ma et al. JOURNAL OF POWER SOURCES
- Flexible carbon nanofiber/polyvinylidene fluoride composite membranes as interlayers in high-performance Lithium Sulfur batteries
- (2016) Zhenhua Wang et al. JOURNAL OF POWER SOURCES
- Porous spherical polyacrylonitrile-carbon nanocomposite with high loading of sulfur for lithium–sulfur batteries
- (2016) Hiesang Sohn et al. JOURNAL OF POWER SOURCES
- Metal Sulfide-Blended Sulfur Cathodes in High Energy Lithium-Sulfur Cells
- (2016) Ratnakumar V. Bugga et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Anchoring function for polysulfide ions of ultrasmall SnS2 in hollow carbon nanospheres for high performance lithium–sulfur batteries
- (2016) Xueliang Li et al. Materials Science and Engineering B-Advanced Functional Solid-State Materials
- Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
- (2016) Zhe Yuan et al. NANO LETTERS
- Layer-by-Layer Assembled Architecture of Polyelectrolyte Multilayers and Graphene Sheets on Hollow Carbon Spheres/Sulfur Composite for High-Performance Lithium–Sulfur Batteries
- (2016) Feng Wu et al. NANO LETTERS
- A carbon nanofiber network for stable lithium metal anodes with high Coulombic efficiency and long cycle life
- (2016) Anyi Zhang et al. Nano Research
- A simple melting-diffusing-reacting strategy to fabricate S/NiS2–C for lithium–sulfur batteries
- (2016) Yue Lu et al. Nanoscale
- Negating interfacial impedance in garnet-based solid-state Li metal batteries
- (2016) Xiaogang Han et al. NATURE MATERIALS
- Suppressing the dissolution of polysulfides with cosolvent fluorinated diether towards high-performance lithium sulfur batteries
- (2016) Sui Gu et al. PHYSICAL CHEMISTRY CHEMICAL PHYSICS
- Composite lithium metal anode by melt infusion of lithium into a 3D conducting scaffold with lithiophilic coating
- (2016) Zheng Liang et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Recent advances in electrospun carbon nanofibers and their application in electrochemical energy storage
- (2016) Biao Zhang et al. PROGRESS IN MATERIALS SCIENCE
- Three-dimensional porous carbon composites containing high sulfur nanoparticle content for high-performance lithium–sulfur batteries
- (2016) Guoxing Li et al. Nature Communications
- 3D Vertically Aligned and Interconnected Porous Carbon Nanosheets as Sulfur Immobilizers for High Performance Lithium-Sulfur Batteries
- (2016) Sarish Rehman et al. Advanced Energy Materials
- Design Principles for Optimum Performance of Porous Carbons in Lithium-Sulfur Batteries
- (2016) Ritu Sahore et al. Advanced Energy Materials
- Fabrication of N-doped Graphene-Carbon Nanotube Hybrids from Prussian Blue for Lithium-Sulfur Batteries
- (2016) Dawei Su et al. Advanced Energy Materials
- Natural Integrated Carbon Architecture for Rechargeable Lithium–Sulfur Batteries
- (2016) Jiaqi Xu et al. ACS Sustainable Chemistry & Engineering
- Fabricating multifunctional nanoparticle membranes by a fast layer-by-layer Langmuir–Blodgett process: application in lithium–sulfur batteries
- (2016) M. S. Kim et al. Journal of Materials Chemistry A
- A lightweight multifunctional interlayer of sulfur–nitrogen dual-doped graphene for ultrafast, long-life lithium–sulfur batteries
- (2016) Lu Wang et al. Journal of Materials Chemistry A
- Biological cell derived N-doped hollow porous carbon microspheres for lithium–sulfur batteries
- (2016) Yanping Xie et al. Journal of Materials Chemistry A
- A long-life lithium–sulphur battery by integrating zinc–organic framework based separator
- (2016) Songyan Bai et al. Journal of Materials Chemistry A
- Pyrite FeS2 as an efficient adsorbent of lithium polysulphide for improved lithium–sulphur batteries
- (2016) Sheng S. Zhang et al. Journal of Materials Chemistry A
- Anchoring function for polysulfide ions of ultrasmall SnS2 in hollow carbon nanospheres for high performance lithium–sulfur batteries
- (2016) Xueliang Li et al. Materials Science and Engineering B-Advanced Functional Solid-State Materials
- Polyamidoamine dendrimer-based binders for high-loading lithium–sulfur battery cathodes
- (2016) Priyanka Bhattacharya et al. Nano Energy
- Novel gel polymer electrolyte for high-performance lithium–sulfur batteries
- (2016) Ming Liu et al. Nano Energy
- The Importance of Pore Size and Surface Polarity for Polysulfide Adsorption in Lithium Sulfur Batteries
- (2016) Felix Hippauf et al. Advanced Materials Interfaces
- Atomic Layer Deposition of Li x Al y S Solid-State Electrolytes for Stabilizing Lithium-Metal Anodes
- (2016) Yanqiang Cao et al. ChemElectroChem
- A graphene-like metallic cathode host for long-life and high-loading lithium–sulfur batteries
- (2016) Quan Pang et al. Materials Horizons
- Dendrites and Pits: Untangling the Complex Behavior of Lithium Metal Anodes through Operando Video Microscopy
- (2016) Kevin N. Wood et al. ACS Central Science
- Durability of the Li1+xTi2–xAlx(PO4)3 Solid Electrolyte in Lithium–Sulfur Batteries
- (2016) Shaofei Wang et al. ACS Energy Letters
- Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth
- (2016) Kai Yan et al. Nature Energy
- Metal–organic framework-based separator for lithium–sulfur batteries
- (2016) Songyan Bai et al. Nature Energy
- High-power all-solid-state batteries using sulfide superionic conductors
- (2016) Yuki Kato et al. Nature Energy
- Comparative Study of Ether-Based Electrolytes for Application in Lithium–Sulfur Battery
- (2015) Lorenzo Carbone et al. ACS Applied Materials & Interfaces
- Understanding the Effect of a Fluorinated Ether on the Performance of Lithium–Sulfur Batteries
- (2015) Nasim Azimi et al. ACS Applied Materials & Interfaces
- Sulfur Embedded in a Mesoporous Carbon Nanotube Network as a Binder-Free Electrode for High-Performance Lithium–Sulfur Batteries
- (2015) Li Sun et al. ACS Nano
- Permselective Graphene Oxide Membrane for Highly Stable and Anti-Self-Discharge Lithium–Sulfur Batteries
- (2015) Jia-Qi Huang et al. ACS Nano
- Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition
- (2015) Alexander C. Kozen et al. ACS Nano
- CaO-Templated Growth of Hierarchical Porous Graphene for High-Power Lithium-Sulfur Battery Applications
- (2015) Cheng Tang et al. ADVANCED FUNCTIONAL MATERIALS
- Confined Sulfur in Microporous Carbon Renders Superior Cycling Stability in Li/S Batteries
- (2015) Yunhua Xu et al. ADVANCED FUNCTIONAL MATERIALS
- A Lightweight TiO2/Graphene Interlayer, Applied as a Highly Effective Polysulfide Absorbent for Fast, Long-Life Lithium-Sulfur Batteries
- (2015) Zhubing Xiao et al. ADVANCED MATERIALS
- A Nitrogen and Sulfur Dual-Doped Carbon Derived from Polyrhodanine@Cellulose for Advanced Lithium-Sulfur Batteries
- (2015) Quan Pang et al. ADVANCED MATERIALS
- Hollow Carbon Nanofibers Filled with MnO2Nanosheets as Efficient Sulfur Hosts for Lithium-Sulfur Batteries
- (2015) Zhen Li et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Large-scale synthesis of ordered mesoporous carbon fiber and its application as cathode material for lithium–sulfur batteries
- (2015) Hongqiang Wang et al. CARBON
- A hierarchical carbon fiber/sulfur composite as cathode material for Li–S batteries
- (2015) Feng Wu et al. CARBON
- Conductive Lewis Base Matrix to Recover the Missing Link of Li2S8 during the Sulfur Redox Cycle in Li–S Battery
- (2015) Jia-Jia Chen et al. CHEMISTRY OF MATERIALS
- High capacity and cyclability of hierarchical MoS 2 /SnO 2 nanocomposites as the cathode of lithium-sulfur battery
- (2015) De-An Zhang et al. ELECTROCHIMICA ACTA
- Effect of Anion on Behaviour of Li-S Battery Electrolyte Solutions Based on N-Methyl-N-Butyl-Pyrrolidinium Ionic Liquids
- (2015) Marzieh Barghamadi et al. ELECTROCHIMICA ACTA
- Lithium/sulfur batteries with mixed liquid electrolytes based on ethyl 1,1,2,2-tetrafluoroethyl ether
- (2015) Hai Lu et al. ELECTROCHIMICA ACTA
- Sulfur impregnated in tunable porous N-doped carbon as sulfur cathode: effect of pore size distribution
- (2015) Sha Wang et al. ELECTROCHIMICA ACTA
- Porous carbon nanofiber paper as an effective interlayer for high-performance lithium-sulfur batteries
- (2015) Jiangan Wang et al. ELECTROCHIMICA ACTA
- Sulfur/three-dimensional graphene composite for high performance lithium–sulfur batteries
- (2015) Chunmei Xu et al. JOURNAL OF POWER SOURCES
- Novel interlayer made from Fe3C/carbon nanofiber webs for high performance lithium–sulfur batteries
- (2015) Jian-Qiu Huang et al. JOURNAL OF POWER SOURCES
- Ionic liquid-based electrolyte with binary lithium salts for high performance lithium–sulfur batteries
- (2015) Feng Wu et al. JOURNAL OF POWER SOURCES
- Specially designed carbon black nanoparticle-sulfur composite cathode materials with a novel structure for lithium–sulfur battery application
- (2015) Zhenjie Sun et al. JOURNAL OF POWER SOURCES
- A novel laminated separator with multi functions for high-rate dischargeable lithium–sulfur batteries
- (2015) Wenlong Cai et al. JOURNAL OF POWER SOURCES
- Mesoporous carbon spheres with controlled porosity for high-performance lithium–sulfur batteries
- (2015) Dexian Wang et al. JOURNAL OF POWER SOURCES
- Ternary Hybrid Material for High-Performance Lithium–Sulfur Battery
- (2015) Qi Fan et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Metal–Sulfur Battery Cathodes Based on PAN–Sulfur Composites
- (2015) Shuya Wei et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Interaction of CuS and Sulfur in Li-S Battery System
- (2015) Ke Sun et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Microporous carbon derived from Apricot shell as cathode material for lithium–sulfur battery
- (2015) Kai Yang et al. MICROPOROUS AND MESOPOROUS MATERIALS
- Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes
- (2015) Zheng Liang et al. NANO LETTERS
- Slurryless Li2S/Reduced Graphene Oxide Cathode Paper for High-Performance Lithium Sulfur Battery
- (2015) Chao Wang et al. NANO LETTERS
- Understanding the Anchoring Effect of Two-Dimensional Layered Materials for Lithium–Sulfur Batteries
- (2015) Qianfan Zhang et al. NANO LETTERS
- A hierarchical carbon nanotube-loaded glass-filter composite paper interlayer with outstanding electrolyte uptake properties for high-performance lithium–sulphur batteries
- (2015) Cho-Long Lee et al. Nanoscale
- Entropy-stabilized oxides
- (2015) Christina M. Rost et al. Nature Communications
- A highly efficient polysulfide mediator for lithium–sulfur batteries
- (2015) Xiao Liang et al. Nature Communications
- Lithium-Sulfur Cells: The Gap between the State-of-the-Art and the Requirements for High Energy Battery Cells
- (2015) Markus Hagen et al. Advanced Energy Materials
- Recent Advances in Electrolytes for Lithium-Sulfur Batteries
- (2015) Shiguo Zhang et al. Advanced Energy Materials
- Electrochemically Stable Rechargeable Lithium-Sulfur Batteries with a Microporous Carbon Nanofiber Filter for Polysulfide
- (2015) Sheng-Heng Chung et al. Advanced Energy Materials
- Dual-Confined Flexible Sulfur Cathodes Encapsulated in Nitrogen-Doped Double-Shelled Hollow Carbon Spheres and Wrapped with Graphene for Li-S Batteries
- (2015) Guangmin Zhou et al. Advanced Energy Materials
- High-Energy, High-Rate, Lithium-Sulfur Batteries: Synergetic Effect of Hollow TiO2 -Webbed Carbon Nanotubes and a Dual Functional Carbon-Paper Interlayer
- (2015) Jang-Yeon Hwang et al. Advanced Energy Materials
- Tailoring Pore Size of Nitrogen-Doped Hollow Carbon Nanospheres for Confining Sulfur in Lithium-Sulfur Batteries
- (2015) Weidong Zhou et al. Advanced Energy Materials
- Enhanced electrochemical performance of sulfur cathodes with a water-soluble binder
- (2015) Jin Pan et al. RSC Advances
- Additive Manufacturing of a Microbial Fuel Cell—A detailed study
- (2015) Flaviana Calignano et al. Scientific Reports
- Single step transformation of sulphur to Li2S2/Li2S in Li-S batteries
- (2015) M. Helen et al. Scientific Reports
- Electrocatalysis of Lithium Polysulfides: Current Collectors as Electrodes in Li/S Battery Configuration
- (2015) Ganguli Babu et al. Scientific Reports
- Protected lithium anode with porous Al2O3 layer for lithium–sulfur battery
- (2015) Hang-Kun Jing et al. Journal of Materials Chemistry A
- Poly(ethylene oxide)-based electrolytes for lithium-ion batteries
- (2015) Zhigang Xue et al. Journal of Materials Chemistry A
- Investigation of surface effects through the application of the functional binders in lithium sulfur batteries
- (2015) Guo Ai et al. Nano Energy
- Bis(2,2,2-trifluoroethyl) Ether As an Electrolyte Co-solvent for Mitigating Self-Discharge in Lithium–Sulfur Batteries
- (2014) Mikhail L. Gordin et al. ACS Applied Materials & Interfaces
- A lithium anode protection guided highly-stable lithium–sulfur battery
- (2014) Guoqiang Ma et al. CHEMICAL COMMUNICATIONS
- Alloy Negative Electrodes for Li-Ion Batteries
- (2014) M. N. Obrovac et al. CHEMICAL REVIEWS
- Understanding of Sulfurized Polyacrylonitrile for Superior Performance Lithium/Sulfur Battery
- (2014) Sheng Zhang Energies
- Improved lithium–sulfur batteries with a conductive coating on the separator to prevent the accumulation of inactive S-related species at the cathode–separator interface
- (2014) Hongbin Yao et al. Energy & Environmental Science
- Effect of electrochemical dissolution and deposition order on lithium dendrite formation: a top view investigation
- (2014) Wenjun Li et al. FARADAY DISCUSSIONS
- Ultrathin Two-Dimensional Atomic Crystals as Stable Interfacial Layer for Improvement of Lithium Metal Anode
- (2014) Kai Yan et al. NANO LETTERS
- Dendrite-Free Nanostructured Anode: Entrapment of Lithium in a 3D Fibrous Matrix for Ultra-Stable Lithium-Sulfur Batteries
- (2014) Xin-Bing Cheng et al. Small
- Ultrasmall Li2S Nanoparticles Anchored in Graphene Nanosheets for High-Energy Lithium-Ion Batteries
- (2014) Kai Zhang et al. Scientific Reports
- Graphene-wrapped chromium-MOF(MIL-101)/sulfur composite for performance improvement of high-rate rechargeable Li–S batteries
- (2014) Zhenxia Zhao et al. Journal of Materials Chemistry A
- In Situ Formed Lithium Sulfide/Microporous Carbon Cathodes for Lithium-Ion Batteries
- (2013) Shiyou Zheng et al. ACS Nano
- Ultrasound Assisted Design of Sulfur/Carbon Cathodes with Partially Fluorinated Ether Electrolytes for Highly Efficient Li/S Batteries
- (2013) Wei Weng et al. ADVANCED MATERIALS
- Nanostructured sulfur cathodes
- (2013) Yuan Yang et al. CHEMICAL SOCIETY REVIEWS
- Improved performance of lithium–sulfur battery with fluorinated electrolyte
- (2013) Nasim Azimi et al. ELECTROCHEMISTRY COMMUNICATIONS
- Lithium metal anodes for rechargeable batteries
- (2013) Wu Xu et al. Energy & Environmental Science
- Ionic Liquid Electrolytes for Lithium–Sulfur Batteries
- (2013) Jun-Woo Park et al. Journal of Physical Chemistry C
- N-Methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide-based organic electrolyte for high performance lithium–sulfur batteries
- (2013) Lina Wang et al. JOURNAL OF POWER SOURCES
- Reduced graphene oxide film as a shuttle-inhibiting interlayer in a lithium–sulfur battery
- (2013) Xuefeng Wang et al. JOURNAL OF POWER SOURCES
- Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
- (2013) Sheng S. Zhang JOURNAL OF POWER SOURCES
- A sulfur–polyacrylonitrile/graphene composite cathode for lithium batteries with excellent cyclability
- (2013) Jing Li et al. JOURNAL OF POWER SOURCES
- Solvate Ionic Liquid Electrolyte for Li–S Batteries
- (2013) Kaoru Dokko et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Understanding the Role of Different Conductive Polymers in Improving the Nanostructured Sulfur Cathode Performance
- (2013) Weiyang Li et al. NANO LETTERS
- A novel sulfur/polypyrrole/multi-walled carbon nanotube nanocomposite cathode with core–shell tubular structure for lithium rechargeable batteries
- (2013) Yongguang Zhang et al. SOLID STATE IONICS
- Stable cycling of lithium sulfide cathodes through strong affinity with a bifunctional binder
- (2013) Zhi Wei Seh et al. Chemical Science
- High-capacity Li2S–graphene oxide composite cathodes with stable cycling performance
- (2013) Zhi Wei Seh et al. Chemical Science
- Sulphur–TiO2 yolk–shell nanoarchitecture with internal void space for long-cycle lithium–sulphur batteries
- (2013) Zhi Wei Seh et al. Nature Communications
- A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
- (2013) Liumin Suo et al. Nature Communications
- Batteries used to power implantable biomedical devices
- (2012) David C. Bock et al. ELECTROCHIMICA ACTA
- Carbon nanofiber–sulfur composite cathode materials with different binders for secondary Li/S cells
- (2012) Mumin Rao et al. ELECTROCHIMICA ACTA
- Polyacrylonitrile/graphene composite as a precursor to a sulfur-based cathode material for high-rate rechargeable Li–S batteries
- (2012) Lichao Yin et al. Energy & Environmental Science
- Hydrodesulfurization of dibenzothiophene and its hydrogenated intermediates over bulk MoP
- (2012) Jin Bai et al. JOURNAL OF CATALYSIS
- Optimizing Li+ conductivity in a garnet framework
- (2012) Yutao Li et al. JOURNAL OF MATERIALS CHEMISTRY
- Thermal runaway caused fire and explosion of lithium ion battery
- (2012) Qingsong Wang et al. JOURNAL OF POWER SOURCES
- Application of lithiated Nafion ionomer film as functional separator for lithium sulfur cells
- (2012) Zhaoqing Jin et al. JOURNAL OF POWER SOURCES
- Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
- (2012) Sen Xin et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Opportunities and challenges for a sustainable energy future
- (2012) Steven Chu et al. NATURE
- 7Li MRI of Li batteries reveals location of microstructural lithium
- (2012) S. Chandrashekar et al. NATURE MATERIALS
- Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
- (2012) Yu-Sheng Su et al. Nature Communications
- A Polyaniline-Coated Sulfur/Carbon Composite with an Enhanced High-Rate Capability as a Cathode Material for Lithium/Sulfur Batteries
- (2012) Guo-Chun Li et al. Advanced Energy Materials
- Water-Soluble Polyacrylic Acid as a Binder for Sulfur Cathode in Lithium-Sulfur Battery
- (2012) Z. Zhang et al. ECS Electrochemistry Letters
- Ternary sulfur/polyacrylonitrile/Mg0.6Ni0.4O composite cathodes for high performance lithium/sulfur batteries
- (2012) Yongguang Zhang et al. Journal of Materials Chemistry A
- Reversibility of electrochemical reactions of sulfur supported on inverse opal carbon in glyme–Li salt molten complex electrolytes
- (2011) Naoki Tachikawa et al. CHEMICAL COMMUNICATIONS
- Optimization of mesoporous carbon structures for lithium–sulfur battery applications
- (2011) Xiaolin Li et al. JOURNAL OF MATERIALS CHEMISTRY
- A novel pyrolyzed polyacrylonitrile-sulfur@MWCNT composite cathode material for high-rate rechargeable lithium/sulfur batteries
- (2011) Lichao Yin et al. JOURNAL OF MATERIALS CHEMISTRY
- Enhanced Cyclability for Sulfur Cathode Achieved by a Water-Soluble Binder
- (2011) Min He et al. Journal of Physical Chemistry C
- Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
- (2011) Liwen Ji et al. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
- Nanostructured electrodes for lithium-ion and lithium-air batteries: the latest developments, challenges, and perspectives
- (2011) Min-Kyu Song et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- A lithium superionic conductor
- (2011) Noriaki Kamaya et al. NATURE MATERIALS
- Li–O2 and Li–S batteries with high energy storage
- (2011) Peter G. Bruce et al. NATURE MATERIALS
- Electrical Energy Storage for the Grid: A Battery of Choices
- (2011) B. Dunn et al. SCIENCE
- Li-alloy based anode materials for Li secondary batteries
- (2010) Cheol-Min Park et al. CHEMICAL SOCIETY REVIEWS
- New Nanostructured Li2S/Silicon Rechargeable Battery with High Specific Energy
- (2010) Yuan Yang et al. NANO LETTERS
- In situ NMR observation of the formation of metallic lithium microstructures in lithium batteries
- (2010) Rangeet Bhattacharyya et al. NATURE MATERIALS
- All solid-state sheet battery using lithium inorganic solid electrolyte, thio-LISICON
- (2009) Taro Inada et al. JOURNAL OF POWER SOURCES
- A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
- (2009) Xiulei Ji et al. NATURE MATERIALS
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started