标题
Influence of specimen geometry on the energy release rate in concrete
作者
关键词
-
出版物
THEORETICAL AND APPLIED FRACTURE MECHANICS
Volume -, Issue -, Pages 104175
出版商
Elsevier BV
发表日期
2023-11-04
DOI
10.1016/j.tafmec.2023.104175
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Strain rate effect on the fracture parameters of concrete three-point bending beam with a small span-to-height ratio
- (2023) Huiheng Lian et al. ENGINEERING FRACTURE MECHANICS
- Mode I delamination R-Curve in poplar laminated veneer lumber
- (2023) A. Peignon et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Concrete Composites Based on Quaternary Blended Cements with a Reduced Width of Initial Microcracks
- (2023) Grzegorz Ludwik Golewski Applied Sciences-Basel
- The Phenomenon of Cracking in Cement Concretes and Reinforced Concrete Structures: The Mechanism of Cracks Formation, Causes of Their Initiation, Types and Places of Occurrence, and Methods of Detection—A Review
- (2023) Grzegorz Ludwik Golewski Buildings
- Crack extension resistance for a general three-point bending concrete beam
- (2023) Yangyang Yin et al. ENGINEERING FRACTURE MECHANICS
- A comparison between FEM predictions and DIC results of crack tip displacement field in CT specimens made of titanium
- (2023) G.L. Gómez Gonzáles et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Determination of mixed-mode I/II fracture toughness and bridging law of composite laminates
- (2023) Yu Gong et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Experimental and meso-scale investigation of size effect on fracture properties in three-point concrete beams (TPB)
- (2023) Arman Kargari et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Heating-path dependency of fracture behavior of sandstone subjected to thermal treatment
- (2023) Yu Jiang et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Effect of Coarse Aggregate Grading on Mechanical Parameters and Fracture Toughness of Limestone Concrete
- (2023) Grzegorz Ludwik Golewski Infrastructures
- Study of fracture parameters and complete fracture process of concrete at low temperatures using an energy approach
- (2022) Bing Fan et al. ENGINEERING FRACTURE MECHANICS
- Fracture properties of concrete exposed to different sulfate solutions under drying-wetting cycles
- (2022) Yangyang Yin et al. ENGINEERING FRACTURE MECHANICS
- Evaluation of R-curves and cohesive law in mode I of European beech
- (2022) J.L. Gómez-Royuela et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Numerical assessment of the apparent fracture process zone length in wood under mode I condition using cohesive elements
- (2022) Marek Romanowicz THEORETICAL AND APPLIED FRACTURE MECHANICS
- Maximum resistance rate principle for quasi-brittle fracture
- (2022) Longbang Qing et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Study of the fracture behaviour in hybrid fibers reinforced thermoplastic laminates: Influence of temperature and initial notch orientation
- (2022) B. Vieille et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Fracture properties of concrete under freeze–thaw cycles and sulfate attack
- (2022) Shaowei Hu et al. CONSTRUCTION AND BUILDING MATERIALS
- Comparative measurements of fracture toughgness combined with visual analysis of cracks propagation using the DIC technique of concretes based on cement matrix with a highly diversified composition
- (2022) G.L. Golewski THEORETICAL AND APPLIED FRACTURE MECHANICS
- Determination of crack extension resistance of concrete from boundary effect model
- (2021) Yanhua Zhao et al. ENGINEERING FRACTURE MECHANICS
- Effects of span-depth ratios on the energy release rate for three-point bending beams
- (2021) Yangyang Yin et al. ENGINEERING FRACTURE MECHANICS
- Fracture resistance curves of wood in the longitudinal direction using digital image correlation technique
- (2021) Ying Yu et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Effect of similar and dissimilar interface layers on delamination in hybrid plain woven glass/carbon epoxy laminated composite double cantilever beam under Mode-I loading
- (2021) M.L.J. Suman et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Characterization of Ductile Crack Growth Resistance Behaviour of Interstitial-Free Steel Sheet using Energy Dissipation Rate Parameter
- (2021) S.K. Chandra et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Effect of mode mixity, temperature, binder content, and gradation on mixed mode (I/II) R-curve of asphalt concrete at low temperatures
- (2021) Sepehr Ghafari et al. CONSTRUCTION AND BUILDING MATERIALS
- Nonlinear mechanical response and residual tearing strength of flexible composite sheet with single edge-crack under uniaxial tension
- (2021) Di Chen et al. ENGINEERING FRACTURE MECHANICS
- Crack extension resistance of concrete under low temperatures
- (2019) Shaowei Hu et al. MAGAZINE OF CONCRETE RESEARCH
- A review on concrete fracture energy and effective parameters
- (2019) S. Khalilpour et al. CEMENT AND CONCRETE RESEARCH
- Critical comparison of the boundary effect model with cohesive crack model and size effect law
- (2019) Christian Carloni et al. ENGINEERING FRACTURE MECHANICS
- Delamination R-curve behavior of curved composite laminates
- (2019) A. Ghadirdokht et al. COMPOSITES PART B-ENGINEERING
- A new way to analyse the size effect in quasi-brittle materials by scaling the heterogeneity size
- (2019) Syed Yasir Alam et al. ENGINEERING FRACTURE MECHANICS
- Determining concrete fracture parameters using three-point bending beams with various specimen spans
- (2019) Yangyang Yin et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Transition from energy dissipation to crack openings during continuum–discontinuum fracture of concrete
- (2017) Syed Yasir Alam et al. INTERNATIONAL JOURNAL OF FRACTURE
- Appropriate shape of cohesive zone model for delamination propagation in ENF specimens with R-curve effects
- (2017) M. Heidari-Rarani et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Fracture of 0.1 and 2 m long mortar beams under three-point-bending
- (2017) Junfeng Guan et al. MATERIALS & DESIGN
- Effect of interface fiber angle on the R-curve behavior of E-glass/epoxy DCB specimens
- (2016) M.M. Shokrieh et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- A three-parameter R-curve of concrete-like quasi-brittle materials
- (2015) Yanhua Zhao et al. CONSTRUCTION AND BUILDING MATERIALS
- Universal Size-Shape Effect Law Based on Comprehensive Concrete Fracture Tests
- (2014) Christian G. Hoover et al. JOURNAL OF ENGINEERING MECHANICS
- A simple fracture mechanical interpretation of size effects in concrete fracture toughness tests
- (2013) Kim Wallin ENGINEERING FRACTURE MECHANICS
- Weight function approach for determining crack extension resistance based on the cohesive stress distribution in concrete
- (2009) Shailendra Kumar et al. ENGINEERING FRACTURE MECHANICS
- Bilinear softening parameters and equivalent LEFM R-curve in quasibrittle failure
- (2009) S. Morel et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now