Effect of Loading Frequency on the Fretting-Corrosion Degradation of the Stem-Head and Stem-Cement Interfaces in Hip Implants

Design, Material, and Seating Load Effects on In Vitro Fretting Corrosion Performance of Modular Head-Neck Tapers

(2019) Eric S. Ouellette et al.   JOURNAL OF ARTHROPLASTY

Effects of Seating Load Magnitude on Incremental Cyclic Fretting Corrosion in 5°40’ Mixed Alloy Modular Taper Junctions

(2018) David Pierre et al.   JOURNAL OF ARTHROPLASTY

The onset of fretting at the head-stem connection in hip arthroplasty is affected by head material and trunnion design under simulated corrosion conditions

(2018) Fiachra E. Rowan et al.   JOURNAL OF ORTHOPAEDIC RESEARCH

Fretting–corrosion at the modular tapers interface: Inspection of standard ASTM F1875-98

(2018) Rachel Bingley et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE

Does a micro-grooved trunnion stem surface finish improve fixation and reduce fretting wear at the taper junction of total hip replacements? A finite element evaluation

(2017) Ariyan Ashkanfar et al.   JOURNAL OF BIOMECHANICS

The effect of different assembly loads on taper junction fretting wear in total hip replacements

(2016) Russell English et al.   TRIBOLOGY INTERNATIONAL

Finite element analysis of the head–neck taper interface of modular hip prostheses

(2015) R.M.R. Dyrkacz et al.   TRIBOLOGY INTERNATIONAL

Potential and frequency effects on fretting corrosion of Ti6Al4V and CoCrMo surfaces

(2013) Viswanathan Swaminathan et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Fretting corrosion characteristics of polished collarless tapered stems in a simulated biological environment

(2013) Michael Bryant et al.   TRIBOLOGY INTERNATIONAL

Fretting corrosion of fully cemented polished collarless tapered stems: The influence of PMMA bone cement

(2013) M. Bryant et al.   WEAR

Is there still a place for the cemented titanium femoral stem?

(2011) Geir Hallan et al.   Acta Orthopaedica

Influence of material coupling and assembly condition on the magnitude of micromotion at the stem–neck interface of a modular hip endoprosthesis

(2011) S.Y. Jauch et al.   JOURNAL OF BIOMECHANICS

Fretting-corrosion between 316L SS and PMMA: Influence of ionic strength, protein and electrochemical conditions on material wear. Application to orthopaedic implants

(2011) J. Pellier et al.   WEAR

Modular titanium alloy neck adapter failures in hip replacement - failure mode analysis and influence of implant material

(2010) Thomas M Grupp et al.   BMC MUSCULOSKELETAL DISORDERS

Dose-dependent cytotoxicity of clinically relevant cobalt nanoparticles and ions on macrophagesin vitro

(2009) Young-Min Kwon et al.   Biomedical Materials

In vitro measurement of interface micromotion and crack in cemented total hip arthroplasty systems with different surface roughness

(2009) Donok Choi et al.   CLINICAL BIOMECHANICS

Fretting crevice corrosion of stainless steel stem-CoCr femoral head connections: Comparisons of materials, initial moisture, and offset length

(2008) Jeremy L. Gilbert et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Biocompatibility of pure iron: In vitro assessment of degradation kinetics and cytotoxicity on endothelial cells

(2008) Shengfa Zhu et al.   Materials Science & Engineering C-Materials for Biological Applications

Evaluation of the Potential Cytotoxicity of Metals Associated with Implanted Biomaterials (I)

(2008) Zhihua Zhou et al.   PREPARATIVE BIOCHEMISTRY & BIOTECHNOLOGY

What results in fretting wear on polished femoral stems

(2008) Liam A. Blunt et al.   TRIBOLOGY INTERNATIONAL