Numerical investigation of the effect of perforation inclination angle on the performance of a perforated pin-fin heatsink using two-phase mixture model

A review on nanofluids coupled with extended surfaces for heat transfer enhancement

(2023) M.L.G. Ho et al.   Results in Engineering

Analysis of efficiency and performance evaluation criterion of nanofluid flow within a tube enhanced with perforated triple twisted tape: A two-phase analysis

(2023) Peijia Chen et al.   Case Studies in Thermal Engineering

Cooling of a lithium-ion battery using microchannel heatsink with wavy microtubes in the presence of nanofluid

(2022) Akram Jahanbakhshi et al.   Journal of Energy Storage

Investigation on two-phase fluid mixture flow, heat transfer and entropy generation of a non-Newtonian water-CMC/CuO nanofluid inside a twisted tube with variable twist pitch: Numerical and evolutionary machine learning simulation

(2022) Amin Shahsavar et al.   ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS

Numerical investigation of heat transfer performance for rectangular, elliptical, and airfoil shaped pin fin heatsinks through the novel combination of perforation and bulge inserts

(2022) Mohammad Rejaul Haque et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

The parametric optimization to enhance the pin-fin microchannel heatsink performance using splitter and water/silver nanofluid applying the two phase mixture model

(2022) Dan Wang et al.   ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS

Heat transfer enhancement of the f-MWCNT- Fe2O3/Water hybrid nanofluid with the combined effect of wire coil with twisted tape and perforated twisted tape

(2022) Ravikiran Balaga et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

CFD studies on thermal performance augmentation of heat sink using perforated twisted, and grooved pin fins

(2022) Mohammad Rejaul Haque et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Thermal performance enhancement and optimization of double-layer microchannel heat sink with intermediate perforated rectangular fins

(2022) Anurag Maheswari et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Computational analysis of perforation effect on the thermo-hydraulic performance of micro pin-fin heat sink

(2021) Deepa Gupta et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

CFD simulation of the impact of tip clearance on the hydrothermal performance and entropy generation of a water-cooled pin-fin heat sink

(2021) Amin Shahsavar et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Experimental and numerical investigation on the thermal performance of triple tube heat exchanger equipped with different inserts with WO3/water nanofluid under turbulent condition

(2021) Arun Kumar Tiwari et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

The experimental thermal and hydraulic performance analyses for the location of perforations and dimples on the twisted tapes in twisted tape inserted tube

(2021) Toygun Dagdevir et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Investigation of Ferro-nanofluid flow within a porous ribbed microchannel heat sink using single-phase and two-phase approaches in the presence of constant magnetic field

(2021) Jian-Feng Zhong et al.   POWDER TECHNOLOGY

Two-phase mixture simulation of the performance of a grooved helical microchannel heat sink filled with biologically prepared water-silver nanofluid: Hydrothermal characteristics and irreversibility behavior

(2021) Mahan Hasani et al.   APPLIED THERMAL ENGINEERING

The effect of inlet/outlet number and arrangement on hydrothermal behavior and entropy generation of the laminar water flow in a pin-fin heat sink

(2021) Amin Shahsavar et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

An optimum design problem in estimating the shape of perforated pins and splitters in a plate-pin-fin heat sink

(2021) Cheng-Hung Huang et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Performance and exergy analysis of different perforated rib designs of triple tubes heat exchanger employing hybrid nanofluids

(2021) Ashraf Mimi Elsaid et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

CFD approach for two-phase CuO nanofluid flow through heat exchangers enhanced by double perforated louvered strip insert

(2020) M.E. Nakhchi et al.   POWDER TECHNOLOGY

Thermal performance augmentation of fin-and-tube heat exchanger using rectangular winglet vortex generators having circular punched holes

(2020) Ashish J. Modi et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Thermo-hydraulic performance and entropy generation of biologically synthesized silver/water-ethylene glycol nano-fluid flow inside a rifled tube using two-phase mixture model

(2020) Amin Shahsavar et al.   Energy Sources Part A-Recovery Utilization and Environmental Effects

A comparison of mixed convective heat transfer performance of nanofluids cooled heat sink with circular perforated pin fin

(2019) Fatima Zohra Bakhti et al.   APPLIED THERMAL ENGINEERING

Experimental and numerical investigation of heat transfer augmentation in heat sinks using perforation technique

(2019) Thamir K. Ibrahim et al.   APPLIED THERMAL ENGINEERING

Fluid flow and heat transfer characteristics of heat sinks with laterally perforated plate fins

(2019) Sakkarin Chingulpitak et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Numerical investigation of forced convection heat transfer and flow irreversibility in a novel heatsink with helical microchannels working with biologically synthesized water-silver nano-fluid

(2019) Amin Shahsavar et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Effects of splitter shape on thermal-hydraulic characteristics of plate-pin-fin heat sink (PPFHS)

(2019) E. Hosseinirad et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Experimental study of heat transfer performance of compact wavy channel with nanofluids as the coolant medium: Real time non-intrusive measurements

(2019) Vijay Singh et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Heat transfer enhancement using nanofluids (Al 2 O 3 -H 2 O) in mini-channel heatsinks

(2018) Muhammad Saeed et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Analysis on Al 2 O 3 /water nanofluid flow in a channel by inserting corrugated/perforated fins for solar heating heat exchangers

(2018) M. Khoshvaght-Aliabadi et al.   RENEWABLE ENERGY

An estimation of the optimum shape and perforation diameters for pin fin arrays

(2018) Cheng-Hung Huang et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

The heat transfer characteristics of liquid cooling heat sink with micro pin fins

(2017) Han-Chieh Chiu et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Thermal–hydraulic performance of wavy plate-fin heat exchanger using passive techniques: Perforations, winglets, and nanofluids

(2016) M. Khoshvaght-Aliabadi et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Intensification of forced convection heat transfer using biological nanofluid in a double-pipe heat exchanger

(2015) M.M. Sarafraz et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

An experimental investigation of natural convection heat transfer enhancement from perforated rectangular fins array at different inclinations

(2015) Umesh V. Awasarmol et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Investigation of nanofluids heat transfer in a ribbed microchannel heat sink using single-phase and multiphase CFD models

(2015) Z. Yari Ghale et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Green synthesis of silver nanoparticles using tea leaf extract and evaluation of their stability and antibacterial activity

(2014) Qian Sun et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS

Improvement of heat transfer with perforated circular holes in finned tubes of air-cooled heat exchanger

(2011) Dong H. Lee et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER