Article
Engineering, Mechanical
Peiming Shi, Yue Yu, Hao Gao, Changchun Hua
Summary: This paper proposes a new deep learning method for monitoring the health states of a rolling mill using multi-source sensing data. The method feeds 2D kurtogram images generated from vibration signals and acoustic signals to the improved one-dimensional Convolutional Neural Network (I1DCNN) and improved two-dimensional Convolutional Neural Network (I2DCNN) respectively, while introducing Group Normalization (GN) and Global averaging pooling (GAP) for better performance. Experimental results demonstrate that the proposed method achieves efficient and accurate health states monitoring compared to other state-of-the-art deep learning methods.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2022)
Article
Engineering, Industrial
Kaiyu Zhang, Jinglong Chen, Shuilong He, Fudong Li, Yong Feng, Zitong Zhou
Summary: The proposed method improves the accuracy of intelligent diagnosis using triplet loss and graph neural network structure, adapting to different working conditions in the target domain through decoupling adversarial learning, significantly enhancing the model's performance.
JOURNAL OF MANUFACTURING SYSTEMS
(2022)
Article
Engineering, Multidisciplinary
Jiang Ji, Chen Zhao, Yongqin Wang, Tuanmin Zhao, Xinyou Zhang
Summary: By integrating EEMD and refined spectrum, the proposed method effectively extracts fault features of rolling mill bearings, improving the prediction accuracy of DBN model compared to time-frequency domain characteristics. The GA-DBN model achieves higher accuracy of 98.3% and significantly reduces diagnosis time, providing a good theoretical basis for fault diagnosis of low-speed bearings.
MATHEMATICAL PROBLEMS IN ENGINEERING
(2021)
Article
Engineering, Electrical & Electronic
Jiadong Meng, Changfeng Yan, Zonggang Wang, Tao Wen, Guangyi Chen, Lixiao Wu
Summary: This study proposes a method based on vibration signals and feature matrix to monitor and identify the health condition of bearings in real time. The results show that this method is efficient and accurate.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT
(2022)
Proceedings Paper
Automation & Control Systems
Yanyan Zhang, Kai Zhang, Pengcheng Yang, Kaixiang Peng
Summary: This paper proposes a strip crown prediction model based on support vector regression (SVR) to solve the difficulty in predicting strip crown in the hot strip rolling mill (HSRM) process. The model parameters are optimized using sparrow search algorithm (SSA) to improve the generalization ability. The model outperforms traditional methods in terms of prediction accuracy and generalization ability, as evaluated by mean square error (MSE), mean absolute error (MAE), mean absolute percentage error (MAPE), and correlation coefficient (R2). The proposed SSA-SVR model is successfully applied to the crown prediction in the 2150 production line of Ansteel company, demonstrating its efficiency in predicting steel crown in a real HSRM process.
2023 IEEE 12TH DATA DRIVEN CONTROL AND LEARNING SYSTEMS CONFERENCE, DDCLS
(2023)
Article
Engineering, Mechanical
Xuanen Kan, Yanjun Lu, Fan Zhang, Weipeng Hu
Summary: A blade disk system is crucial for the energy conversion efficiency of turbomachinery, but differences between blades can result in localized vibration. This study develops an approximate symplectic method to simulate vibration localization in a mistuned bladed disk system and reveals the influences of initial positive pressure, contact angle, and surface roughness on the strength of vibration localization.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2024)
Article
Engineering, Mechanical
Zimeng Liu, Cheng Chang, Haodong Hu, Hui Ma, Kaigang Yuan, Xin Li, Xiaojian Zhao, Zhike Peng
Summary: Considering the calculation efficiency and accuracy of meshing characteristics of gear pair with tooth root crack fault, a parametric model of cracked spur gear is established by simplifying the crack propagation path. The LTCA method is used to calculate the time-varying meshing stiffness and transmission error, and the results are verified by finite element method. The study also proposes a crack area share index to measure the degree of crack fault and determines the application range of simplified crack propagation path.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2024)
Article
Engineering, Mechanical
Rongjian Sun, Conggan Ma, Nic Zhang, Chuyo Kaku, Yu Zhang, Qirui Hou
Summary: This paper proposes a novel forward calculation method (FCM) for calculating anisotropic material parameters (AMPs) of the motor stator assembly, considering structural discontinuities and composite material properties. The method is based on multi-scale theory and decouples the multi-scale equations to describe the equivalence and equivalence preconditions of AMPs of two scale models. The effectiveness of this method is verified by modal experiments.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2024)
Article
Engineering, Mechanical
Hao Zhang, Jiangcen Ke
Summary: This research introduces an intelligent scheduling system framework to optimize the ship lock schedule of the Three Gorges Hub. By analyzing navigational rules, operational characteristics, and existing problems, a mixed-integer nonlinear programming model is formulated with multiple objectives and constraints, and a hybrid intelligent algorithm is constructed for optimization.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2024)
Article
Engineering, Mechanical
Jingjing He, Xizhong Wu, Xuefei Guan
Summary: A sensitivity and reliability enhanced ultrasonic method has been developed in this study to monitor and predict stress loss in pre-stressed multi-layer structures. The method leverages the potential breathing effect of porous cushion materials in the structures to increase the sensitivity of the signal feature to stress loss. Experimental investigations show that the proposed method offers improved accuracy, reliability, and sensitivity to stress change.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2024)
Article
Engineering, Mechanical
Benyamin Hosseiny, Jalal Amini, Hossein Aghababaei
Summary: This paper presents a method for monitoring sub-second or sub-minute displacements using GBSAR signals, which employs spectral estimation to achieve multi-dimensional target detection. It improves the processing of MIMO radar data and enables high-resolution fast displacement monitoring from GBSAR signals.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2024)
Article
Engineering, Mechanical
Xianze Li, Hao Su, Ling Xiang, Qingtao Yao, Aijun Hu
Summary: This paper proposes a novel method for bearing fault identification, which can accurately identify faults with few samples under complex working conditions. The method is based on a Transformer meta-learning model, and the final result is determined by the weighted voting of multiple models.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2024)
Article
Engineering, Mechanical
Xiaomeng Li, Yi Wang, Guangyao Zhang, Baoping Tang, Yi Qin
Summary: Inspired by chaos fractal theory and slowly varying damage dynamics theory, this paper proposes a new health monitoring indicator for vibration signals of rotating machinery, which can effectively monitor the mechanical condition under both cyclo-stationary and variable operating conditions.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2024)
Article
Engineering, Mechanical
Hao Wang, Songye Zhu
Summary: This paper extends the latching mechanism to vibration control to improve energy dissipation efficiency. An innovative semi-active latched mass damper (LMD) is proposed, and different latching control strategies are tested and evaluated. The latching control can optimize the phase lag between control force and structural response, and provide an innovative solution to improve damper effectiveness and develop adaptive semi-active dampers.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2024)
Article
Engineering, Mechanical
Menghao Ping, Xinyu Jia, Costas Papadimitriou, Xu Han, Chao Jiang, Wang-Ji Yan
Summary: Identification of non-Gaussian processes is a challenging task in engineering problems. This article presents an improved orthogonal series expansion method to convert the identification of non-Gaussian processes into a finite number of non-Gaussian coefficients. The uncertainty of these coefficients is quantified using polynomial chaos expansion. The proposed method is applicable to both stationary and nonstationary non-Gaussian processes and has been validated through simulated data and real-world applications.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2024)
Article
Engineering, Mechanical
Lei Li, Wei Yang, Dongfa Li, Jianxin Han, Wenming Zhang
Summary: The frequency locking phenomenon induced by modal coupling can effectively overcome the dependence of peak frequency on driving strength in nonlinear resonant systems and improve the stability of peak frequency. This study proposes the double frequencies locking phenomenon in a three degrees of freedom (3-DOF) magnetic coupled resonant system driven by piezoelectricity. Experimental and theoretical investigations confirm the occurrence of first frequency locking and the subsequent switching to second frequency locking with the increase of driving force. Furthermore, a mass sensing scheme for double analytes is proposed based on the double frequencies locking phenomenon.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2024)
Article
Engineering, Mechanical
Kai Ma, Jingtao Du, Yang Liu, Ximing Chen
Summary: This study explores the feasibility of using nonlinear energy sinks (NES) as replacements for traditional linear tuned mass dampers (TMD) in practical engineering applications, specifically in diesel engine crankshafts. The results show that NES provides better vibration attenuation for the crankshaft compared to TMD under different operating conditions.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2024)
Article
Engineering, Mechanical
Wentao Xu, Li Cheng, Shuaihao Lei, Lei Yu, Weixuan Jiao
Summary: In this study, a high-precision hydraulic mechanical stand and a vertical mixed-flow pumping station device were used to conduct research on cavitation signals of mixed-flow pumps. By analyzing the water pressure pulsation signal, it was found that the power spectrum density method is more sensitive and capable of extracting characteristics compared to traditional time-frequency domain analysis. This has significant implications for the identification and prevention of cavitation in mixed-flow pump machinery.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2024)
Article
Engineering, Mechanical
Xiaodong Chen, Kang Tai, Huifeng Tan, Zhimin Xie
Summary: This paper addresses the issue of parasitic motion in microgripper jaws and its impact on clamping accuracy, and proposes a symmetrically stressed parallelogram mechanism as a solution. Through mechanical modeling and experimental validation, the effectiveness of this method is demonstrated.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2024)
Article
Engineering, Mechanical
Zhifeng Shi, Gang Zhang, Jing Liu, Xinbin Li, Yajun Xu, Changfeng Yan
Summary: This study provides useful guidance for early bearing fault detection and diagnosis by investigating the effects of crack inclination and propagation direction on the vibration characteristics of bearings.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2024)